Computerized Three-Dimensional Analysis: A Novel Method to Assess the Effect of Open-Door Laminoplasty.

INTRODUCTION: The three-dimensional elaboration of morphological data derived from computed tomography (CT) and magnetic resonance imaging (MRI) scans generates virtual anatomical reconstructions. Here, we propose a novel protocol to analyze the postoperative results of open-door laminoplasty to evaluate differences in the volume of the spinal canal. The protocol uses geometric models in patients with cervical degenerative myelopathy before versus after cervical laminoplasty. MATERIALS AND METHODS: Mimics and 3-Matic software (Materialise, Leuven, BE) programs were used to segment anatomical structures and create polygon meshes of spines. Patients with cervical spondylotic myelopathy were enrolled. The models obtained before and after laminoplasty were superimposed by using a global registration function. The magnitude of divergence was quantified by using the root-mean-square error (RMSE). RESULTS: Using this novel protocol, we were able to map the differences in the volume of the spinal canal before laminoplasty and after laminoplasty and to quantify its magnitude and calculate the volumes. DISCUSSION AND CONCLUSIONS: The development of a procedure to measure the space within the cervical bone walls using geometric parameters represents a new, powerful method to verify the results obtained by cervical laminoplasty. Further research horizons may include the routine use of virtual models in surgical planning for this procedure.

Social Profiloplasty: A Practical Assessment and Injection Guide.

The trend of aesthetic medical procedures continues growing every year since decades all over the globe, especially considering minimal invasive treatments since the results are immediate and the downtime minimal. Hence, treatments with hyaluronic acid fillers have become extremely popular and routinely used in common practice. However, numerous areas of treatment were identified and described in the last years clinical training and consciousness of possibly complication remain still under represented. In the following article, we present four key treatment areas for optimal overall facial rejuvenation of what the authors define the social profile. Of each area an assessment, anatomical considerations, danger zones, and the preferred personal technique of the authors are described.

Ultrasound-guided core needle biopsy compared with open biopsy: a new diagnostic approach to salivary gland enlargement in Sjögren's syndrome?

OBJECTIVE: Persistent (≥2 months) major salivary gland enlargement in primary SS (pSS) patients is a well-known sign of possible involvement by B cell lymphoma. The study aimed to evaluate the diagnostic accuracy and safety of US-guided core needle biopsy (CNB) of major salivary glands compared with open surgical biopsy. METHODS: Prospective pSS patients (cases) with clinically persistent salivary gland enlargement underwent US-guided CNB and were compared with retrospective pSS patients (controls) submitted to open surgical biopsy. The features analysed were pre-biopsy clinical and laboratory findings, adequacy of the material for histology and diagnostic-rendered and biopsy-related complications (reported by the patient with a questionnaire and clinically verified). RESULTS: Thirteen cases underwent US-guided CNB: in nine, biopsy was performed on the parotid gland and in four it was performed on the submandibular gland. Sufficient material was obtained for pathological diagnosis in all samples. The final diagnoses were 5 (38.5%) B cell lymphoma, 1 (7.7%) lymphoepithelial sialadenitis, 4 (30.7%) other sialadenitis (granulomatous consistent with sarcoidosis, IgG4-related disease, chronic sclerosing, diffuse chronic) and 3/13 (23.1%) miscellaneous lesions. Thirteen controls underwent open surgical biopsy of the parotid. In one, inadequate material was obtained, while in 12 (92.3%) the pathologic diagnoses were 4 (33.3%) B cell lymphoma, 2 (16.7%) lymphoepithelial sialadenitis, 4 (33.3%) uncertain lymphoproliferative lesions and 2 (16.7%) miscellaneous lesions. Six cases (46.1%) reported six transient complications and 12/13 (92.3%) controls had 2 persistent and 14 transient complications. CONCLUSION: US-guided CNB represents a novel, clinically relevant and safe approach for the management of pSS patients with parotid or submandibular persistent enlargement.

Temporomandibular Joint Arthrocentesis and Microfragmented Adipose Tissue Injection for the Treatment of Internal Derangement and Osteoarthritis: A Randomized Clinical Trial.

PURPOSE: Internal derangement and osteoarthritis are the most common degenerative temporomandibular joint diseases and initial treatment for such conditions relies on arthrocentesis. Microfragmentation of adipose tissue has been proven in orthopedic literature to represent a more effective method to preserve stem cells, but no application has ever been reported in the temporomandibular joint. The purpose of this randomized clinical trial is to compare standard treatment conducted by injecting hyaluronic acid after the procedure to the new treatment relying upon microfragmented adipose tissue injection using the Lipogems technology. MATERIALS AND METHODS: A randomized clinical trial was designed enrolling 20 patients in the control group receiving the standard treatment and 20 patients in the experimental group receiving microfragmented adipose tissue obtained through the Lipogems technology after arthrocentesis. Two main outcomes were defined, pain (visual analogic scale) and function (maximum interincisal opening). Both were measured in the immediate preoperative time, and 10 days, 1 month, and 6 months after the procedure. RESULTS: In both groups, pain reduction and mouth opening significantly improved compared with the preoperative situation (P = .001). At 6-month follow-up, there was an almost statistically significant reduction of pain compared with preoperative visual analogic scale (P = .0546) and a statistically significant improvement of mouth opening (P = .0327). Overall, statistical analyses showed that the experimental group had a statistically significant superiority in the success rate of the procedure compared with the control group (P = .018). CONCLUSIONS: Preliminary results of this clinical trial show that the injection of microfragmented adipose tissue can significantly improve outcomes of pain and function compared with the standard treatment and encourage to pursue research on this topic. Further studies with a longer follow-up time are needed to evaluate the clinical stability of the achieved improvement in pain and function.

Scoping Zygomaticomaxillary Complex Fractures With the Eyes of Virtual Reality: Operative Protocol and Proposal of a Modernized Classification.

INTRODUCTION: Fractures of the zygomaticomaxillary complex (ZMC) represent an extremely heterogeneous group of injuries to the midfacial skeleton. Traditionally, the diagnosis of such fractures was based on 2-dimensional radiograms and, more recently, on volumetric computed tomography (CT) scans, while the treatment was exclusively based on the surgeon's experience. Many classification attempts have been made in the past, but no paper has taken into account the importance of virtual surgical planning (VSP) in proving a modernized classification. The authors propose a classification based on the use of VSP which can guide the surgeon to identify the optimal reduction method and reproduce it in the operating room through the use of navigation. METHODS: Patients with ZMC fractures were collected to create a study model. The VSP was used to generate 3-dimensional models of fractures. Fractured segments were duplicated and digitally put in the optimal reduction position. Repositioned fragments were overlapped to their original preoperative counterparts and exported to the surgical navigator to be navigated. Planned virtual reduction was overlaid to postoperative CT scan to assess the accuracy of reduction, explored using color maps and the calculation of root mean square error. RESULTS: For all patients, the application of VSP was successfully accomplished. High accuracy was confirmed between the planned virtual reduction and the postoperative CT scan. A 5-item classification based on VSP is proposed. All patients were included in the presented subclasses. CONCLUSIONS: The adoption of virtual planning in ZMC fractures allows for an improved study of the displacement of the fracture and might indicate to the surgeons the required maneuvers to achieve optimal reduction. The presented proposal of classification might be an aid to simplify the choice of the most appropriate reduction method and might provide a deeper insight into the morphologic characteristics of fractures.

Nonsurgical Redefinition of the Chin and Jawline of Younger Adults With a Hyaluronic Acid Filler: Results Evaluated With a Grid System Approach.

BACKGROUND: Aesthetic treatment of the lower face is increasingly in demand, particularly owing to age-related changes in appearance. VYC-25L is a novel hyaluronic acid filler with high G' and high cohesivity, specifically designed for sculpting and contouring of the chin and jaw. OBJECTIVES: The aim of this study was to assess the use of a grid traced onto the chin and jaw for guiding treatment with VYC-25L. METHODS: This was a retrospective, single-center analysis of data from adult patients undergoing treatment of the lower third of the face with VYC-25L. A grid system of horizontal and vertical lines was used to systematize the process of treatment planning and performance. RESULTS: Thirty subjects were enrolled (53.3% female; mean [standard deviation] age, 34.4 [2.8] years). The mean quantity of VYC-25L used was 4.0 [0.8] mL. Based on the 5-point Global Aesthetic Improvement Scale, 29 patients (96.7%) rated their appearance at 20 days posttreatment as "much improved" or "very much improved." The only complications recorded were early transient soft-tissue edema (n = 14; 46.7%) and bruising (n = 6; 20.0%). There were no cases of infection, paresthesia, asymmetry, hematoma, necrosis, or skin discoloration. CONCLUSIONS: Treatment of the chin and jawline with VYC-25L, with injection locations determined by a standardized grid-based approach, appears to be effective and safe with high rates of patient satisfaction. Injection of this filler offers a potentially high-impact approach for patients across a variety of biological and economic circumstances.

One-Stage Computer-Guided Customized Management of Skeletal Asymmetry by Concomitant Proportional Condylectomy and Orthognathic Surgery in Patients With Unilateral Condylar Hyperplasia.

PURPOSE: Facial asymmetry associated with unilateral condylar hyperplasia can benefit from condylectomy, which aims to arrest the pathologic condylar growth and restore an appropriate posterior height. However, there are several cases in which condylar hyperplasia is combined with various dentofacial deformities, for which joint surgery has to be accompanied by concomitant orthognathic surgery. The literature is relatively poor of examples in which virtual planning for orthognathic surgery includes the evaluation of condylectomy, which is often manually performed. The aim of this study was to present and discuss a workflow for 1-stage computer-guided customized management of skeletal asymmetry by simultaneous condylectomy and orthognathic surgery. MATERIALS AND METHODS: Five patients were enrolled in this study from 2018 to 2019. All patients underwent combined virtual planning of orthognathic surgery and condylectomy. Virtual surgery was translated into real surgical coordinates using patient-specific surgical guides and custom-designed osteosynthesis plates. RESULTS: All surgical procedures were uneventful, and in all patients, virtual planning was successfully brought into the operating room with high accuracy, as confirmed by superimposition analyses. Symmetrization of the face and achievement of correct occlusion were observed in all cases. CONCLUSIONS: The presented protocol is a reliable solution for the combined planning of orthognathic surgery and condylectomy. Virtual planning, surgical guides, and custom-designed plates allow computerized simulations to be replicated in the real patient.

Computer-Guided In-House Cranioplasty: Establishing a Novel Standard for Cranial Reconstruction and Proposal of an Updated Protocol.

BACKGROUND: Restoring the ideal geometry of the skull vault can be a challenging task. This is especially true for complex cases when cranial reconstruction is associated with concomitant cranial resection in a one-stage procedure. Oftentimes, cranioplasty designing and production are delegated to external companies, with a significant increase in time and cost to fabricate an alloplastic implant. This case series collects and critically examines previous experiences in the field of in-house cranial reconstruction providing an updated protocol to establish a novel standard for cranial reconstruction with a substantial reduction of costs. MATERIALS AND METHODS: A virtual craniotomy was digitally designed by the surgeon and transferred in the operating room using navigation and a surgical guide. Cranial reconstruction was planned using interpolation functions, recreating the ideal shape of the skull vault. Molds were designed, and 3D printed to intra-operatively shape polymethyl methacrylate (PMMA) according to the pre-operative plan. For validating the accuracy of reconstruction, as well as the restoration of the appropriate skull thickness, software-encoded color maps and root-mean-square error (RMSE), were calculated. RESULTS: All surgeries were uneventful. No adverse reactions to PMMA were observed. Accuracy of the procedure was validated, showing a submillimetric deviation from the original planning and a plate thickness value similar to the adjoining bone. All steps of design and production were performed by the surgical team, and costs were seven to ten times less than the past. CONCLUSION: We discussed and improved previous reports in the field of computer-guided in-house cranioplasty, particularly when complex one-stage resective and reconstructive procedures are planned. The use of three-dimensional analyses provides a validation of the accuracy of the resulting cranial reconstruction. The authors hope that the results might inspire other colleagues to consider computer-guided in-house cranioplasty, giving surgeons the mastery of each planning phase with a substantial decrease in costs.

General surgery and COVID-19: review of practical recommendations in the first pandemic phase.

BACKGROUND: In March, 2020, the World Health Organization declared COVID-19 a pandemic. The absence of previous knowledge of COVID-19 has made decision-making difficult for all in health care, including surgical departments. We reviewed the management recommendations for surgical activity and changes to surgical practice, identifying concordances and discrepancies, based on the literature published in the early phase of the pandemic. METHOD: We searched the electronic datasets, PubMed Database, Google, and Google Scholar, using the keywords "SARS-CoV-2", "COVID-19", "surgery", "recommendations", "guideline", and "triage". The search was limited to the first 2 months after the pandemic began and was closed on May 6, 2020. RESULTS: Twenty papers were included in the analysis and their recommendations are divided into the following categories: 1. general aspects, such as maintaining the safety of health personnel and indications for surgery. 2. The preoperative phase, with recommendations about activating different care pathways for COVID-19 positive patients. 3. The operative phase, with recommendations about activating safety measures for aerosol-generating procedures. 4. The postoperative phase, with recommendations for managing operating theatres and patient transfers. CONCLUSION: The recommendations proposed in the revised documents are considered good practices aimed at keeping patients and healthcare professionals safe. However, these recommendations must be contextualized in each individual hospital.

An Updated Protocol for the Treatment of Condylar Hyperplasia: Computer-Guided Proportional Condylectomy.

PURPOSE: To present an updated protocol for proportional condylectomy in which virtual surgical planning and 3-dimensional (3D) printing allow precise definition of the osteotomy level. MATERIALS AND METHODS: Three-dimensional mirroring was performed to generate a virtual replica of the healthy hemimandible, which was subsequently aligned and overlapped with the actual mandible to estimate the level for condylectomy. A custom-fitted 3D printed surgical guide was modeled for the condylar head to reproduce the virtual plan in the surgical scenario. The updated protocol for computer-guided condylectomy was applied to 7 patients. RESULTS: All patients were followed for 12 months. Surface deviation color maps showed a strong correspondence between the virtually calculated condylectomy and the surgical outcome achieved with the aid of the surgical guide. No cases of condylar hyperplasia recurrence were observed. CONCLUSION: An updated protocol based on accurate 3D analysis was performed by virtual surgical planning and 3D printing. Virtual surgical planning allows the precise definition of the level of condylectomy, and custom-made 3D printed cutting guides are useful to reproduce virtual measurements during surgical maneuvers.

Piezosurgery: Ten Years' Experience of Percutaneous Osteotomies in Rhinoplasty.

PURPOSE: The possibility to obtain precise osteotomies without major soft tissue damage represents a key point in modern approaches to rhinoplasty. In 2007, the authors first described their ultrasonic approach for percutaneous nasal bone osteotomies with minimal periosteal detachment. In this article, they retrospectively analyze the results of their piezo-surgical rhinoplasty technique through their 10-year experience and describe new perspectives of this technique. PATIENTS AND METHODS: A series of 183 patients was retrospectively evaluated. Surgical technique was based on piezoelectric external nasal osteotomies, performed percutaneously, without periosteal detachment. For the last patients, the piezoelectric instrument also was tracked with a navigator (piezo-navigated approach). Data on surgery, hospitalization, ecchymosis, edema, and postoperative complications were evaluated. RESULTS: Of the 183 patients, 168 (91.8%) showed grade 0 or 1 edema. Grade 2 edema was noticed in only 15 of 183 patients (8.2%). In 6 of the 183 procedures (3.3%), postoperative complications potentially related to the piezoelectric osteotomy system occurred. CONCLUSION: The piezoelectric external approach can be considered a safe and reliable technique. Preliminary data suggest the possibility of using surgical planning and navigation in positioning the osteotomies in selected subsets of patients.

Fungus ball of the maxillary sinus: Retrospective study of 48 patients and review of the literature.

BACKGROUND: Maxillary fungus ball (FB) is the most frequent paranasal localization. OBJECTIVE: To review clinical presentation, surgery and results of treatment in our series of patients with maxillary FB. To review the literature concerning treatment of maxillary FB. PATIENTS AND METHODS: 48 patients with a diagnosis of maxillary FB were treated with endoscopic sinus surgery (ESS) alone or in association with external approaches. Before surgery all patients received computed tomography (CT), nasal endoscopy and dental examination. All the patients were followed for 1 year after surgery. Studies concerning surgical treatment of maxillary FB from 2006 were reviewed. RESULTS: The mean age of patients was 53.6 ±â€¯11.9 years. 20 patients (41.6%) did not present any symptom, 19 patients (39.7%) had nasal symptoms, 3 patients (6.2%) had facial pain, 6 patients (12.5%) had a combination of both. Endoscopic examination was positive in 31 patients (64.6%), 17 patients (35.4%) showed negative findings. Logit regression model demonstrated that clinical symptoms contribute to the prediction of a positive endoscopic examination. 25 patients (52.1%) presented odontogenic factors. Complete clinical and radiological resolution of FB was observed in 46 patients (95.8%). CONCLUSIONS: Comparing our sample to the studies reviewed we may concluded that odontogenic factors were frequently reported and should be treated at the same time of maxillary FB. ESS alone or in association with external approaches is an effective treatment for patients with maxillary FB.

Volumetric Analysis of Fat Injection by Computerized Tomography in Orthognathic Surgery: Preliminary Report on a Novel Volumetric Analysis Process for the Quantification of Aesthetic Results.

BACKGROUND: Integrated approaches to orthognathic surgery should include accurate volumetric evaluation of the skull and soft tissues. In patients with dentofacial deformities, the most frequent aesthetic deficits are attributable to an underdevelopment of hard and soft tissues. Traditional osteotomic procedures often fail to guarantee a stability of soft tissues over time. For this reason, in selecting a surgical strategy, the surgeon should consider not only traditional osteotomies, but also soft-tissue improving procedures, such as lipofilling. Preoperative surgical planning systems, such as the Virtual surgical planning (VSP) protocol, are based mainly on skeletal movement prediction. Quantitative estimation of soft-tissue modifications is not part of common clinical practice. Most commonly, the evaluation of soft-tissue modifications after orthognathic procedures is instead performed by clinical qualitative means.The purpose of this study was to describe a novel computed tomography (CT)-based volumetric analysis process for the quantification of injected autologous adipose tissue in patients who have undergone simultaneous orthognathic and lipofilling procedures. METHODS: This was a retrospective review of consecutive patients who underwent combined orthognathic surgery and lipofilling from June 2016 to May 2017 for malocclusion with functional and aesthetic impairments. Preoperative planning included clinical evaluation and virtual osteotomy planning according to the VSP protocol. The volume of fat to be injected was estimated clinically by comparing virtual renderings with preoperative clinical photographs. The surgical technique involved Le Fort I and sagittal split mandibular osteotomies, combined with autologous fat injection in the malar and perioral regions. Postoperative evaluation was performed with a novel imaging process based on CT image segmentation to quantify the exact volume of injected fat. Skeletal stability was also evaluated at 3 months. RESULTS: Sixteen patients were enrolled in the study, all females, with a mean age of 24.5 years (range, 18-36 years). The mean difference between the fat tissue injected and that quantified postoperatively was 6.01 cm. All patients had clinically satisfactory facial convexity, with complete restoration of the cheekbone contour, at 3 months. CONCLUSION: This study introduces a novel CT-image based technique to quantitatively assess the contribution of injected fat to the postoperative soft-tissue volume increase after combined orthognathic surgery with autologous lipofilling. In the future, this CT-based volumetric analysis technique could be the gold standard for evaluating facial lipofilling outcomes, and for assessing clinical aesthetic outcomes based on the injected volume of fat.

Multidisciplinary treatment with a customized lingual appliance for an adult patient with severe Class III malocclusion and multiple missing teeth.

A 24-year-old man presented with a severe skeletal class III malocclusion, associated with an anterior and posterior crossbite in the left side, upper and lower lip eversion, skeletal asymmetry, midline discrepancy, diastemas in the maxillary and mandibular dental arches, and agenesis of maxillary lateral incisors and canines with retained deciduous teeth. Treatment was performed with the use of the Win Lingual System. When the 0.016 × 0.022-inch NiTi archiwire was applied, the deciduous teeth were extracted and replaced with temporary crowns connected to the appliance. After the aligning, leveling, and diastema closure phases, a modified Le Fort II osteotomy, a mandibular setback with a bilateral sagittal split osteotomy and a genioplasty were performed. Implants were placed in the canine site through a flapless guided surgery, and cantilevered temporary bridges were delivered. Final prosthetic rehabilitation included veneers for the central incisors and zirconia-ceramic cantilevered bridges for the canine and lateral incisors. After 36 months of active treatment, the patient showed an Angle Class I molar and canine relationship and an ideal overbite and overjet. His profile had improved, lips were competent, and gingival levels were acceptable. The lateral radiograph and cephalometric analysis showed a good balance of the skeletal pattern, a good profile of the soft tissue, and proper inclinations of the maxillary and mandibular incisors in relation to maxilla and mandible. After 2 years of follow-up, the patient had a pleasant smile and no relapse, or joint or muscular pain.

Primary stability of short implants inserted using piezoelectric or drilling systems: an in vitro comparison.

The primary objective of the present in vitro study was to evaluate the influence of implant site preparation technique (drills vs. ultrasonic instrumentation) on the primary stability of short dental implants with two different designs inserted in simulated low quality cancellous bone. Eighty implant sites were prepared in custom-made solid rigid polyurethane blocks with two different low cancellous bone densities (5 or 15 pounds per cubic foot, PCF), equally distributed between piezoelectric (Surgysonic Moto, Esacrom, Italy) and conventional drilling techniques. Two short implant systems (Prama and Syra, Sweden & Martina) were tested by inserting 40 fixtures of each system (both 6.0 mm length and 5.0 mm diameter), divided in the four subgroups (drills/5 PCF density; drills/15 PCF density; piezo/5 PCF density; piezo/15 PCF density). Insertion torque (Ncm), implant stability quotient values, removal torque (Ncm) and surgical time were recorded. Data were analyzed by three-way ANOVA and Scheffé's test (α=0.05). With slight variations among the considered dependent variables, overall high primary implant stability was observed across all subgroups. Piezoelectric instrumentation allowed for comparable or slightly superior primary stability in comparison with the drilling procedures in both implant systems. Prama implants group showed the highest mean reverse torque, Syra implants the highest implant stability quotient values. Piezoelectric implant site preparation took prolonged operative time compared to conventional preparation with drills; among the drilling procedures, Syra system requires fewer surgical steps and shorter operative time.

Primary Stability of Short Implants Inserted Using Piezoelectric or Drilling Systems: An In Vitro Comparison.

The primary objective of the present in vitro study was to evaluate the influence of implant site preparation technique (drills vs ultrasonic instrumentation) on the primary stability of short dental implants with two different designs inserted in simulated low-quality cancellous bone. Eighty implant sites were prepared in custom-made solid rigid polyurethane blocks with two different low cancellous bone densities (5 or 15 pounds per cubic foot [PCF]), equally distributed between piezoelectric (Surgysonic Moto, Esacrom, Italy) and conventional drilling techniques. Two short implant systems (Prama and Syra, Sweden & Martina) were tested by inserting 40 fixtures of each system (both 6.0 mm length and 5.0 mm diameter), divided in the four subgroups (drills/5 PCF density; drills/15 PCF density; piezo/5 PCF density; piezo/15 PCF density). Insertion torque (Ncm), implant stability quotient values, removal torque (Ncm), and surgical time were recorded. Data were analyzed by 3-way ANOVA and Scheffé's test (α = 0.05). With slight variations among the considered dependent variables, overall high primary implant stability was observed across all subgroups. Piezoelectric instrumentation allowed for comparable or slightly superior primary stability in comparison with the drilling procedures in both implant systems. The Prama implants group showed the highest mean reverse torque and Syra implants the highest implant stability quotient values. Piezoelectric implant site preparation took prolonged operative time compared to conventional preparation with drills; among the drilling procedures, Syra system required fewer surgical steps and shorter operative time.

A Novel Protocol for Planning and Navigation in Craniofacial Surgery: A Preclinical Surgical Study.

PURPOSE: In modern craniofacial surgery, the accuracy of osteotomies plays a central role in surgical technique. To reach a higher level of accuracy, many centers use virtual presurgical planning. In the past decade, some surgeons also have applied navigational approaches to craniofacial procedures. In this work, a novel protocol for surgical planning and intraoperative navigation is described and validated in a preclinical setting to determine its accuracy in guiding osteotomies. MATERIALS AND METHODS: This study was based on planning a set of osteotomies using 3-dimensional models of computed tomographic images of human skulls. The planned osteotomies were reproduced on real skulls using an optical infrared navigation system. Positions of the performed osteotomies and planned osteotomies were compared. Results were described as the mean positional error and as a Lin concordance coefficient. The Bland-Altman interval of agreement also was defined to assess a range that could include 95% of possible errors. RESULTS: The mean error was 0.044 mm (95% confidence interval [CI], -0.128 to +0.216), the Lin concordance interval was 0.999 (95% CI, 0.999-1.000), and the Bland-Altman limit of agreement ranged from -1.500 to +1.589 mm. CONCLUSIONS: These results show a submillimetric mean error and a very narrow interval of agreement, providing preclinical validation of this new protocol and suggesting that it could be applied in a clinical setting.

Cranioplasty: Review of Materials.

Cranioplasty remains a difficult procedure for all craniofacial surgeons, particularly when concerning the reconstruction of large lacunae in the skull. Considering the significant clinical and economic impact of the procedure, the search for materials and strategies to provide more comfortable and reliable surgical procedures is one of the most important challenges faced by modern craniofacial medicine.The purpose of this study was to compare the available data regarding the safety and clinical efficacy of materials and techniques currently used for the reconstruction of the skull. Accordingly, the scientific databases were searched for the following keywords autologous bone, biomaterials, cranial reconstruction, cranioplasty, hydroxyapatite, polyetheretherketone, polymethylmethacrylate, and titanium. This literature review emphasizes the benefits and weaknesses of each considered material commonly used for cranioplasty, especially in terms of infectious complications, fractures, and morphological outcomes.As regards the latter, this appears to be very similar among the different materials when custom three-dimensional modeling is used for implant development, suggesting that this criterion is strongly influenced by implant design. However, the overall infection rate can vary from 0% to 30%, apparently dependent on the type of material used, likely in virtue of the wide variation in their chemico-physical composition. Among the different materials used for cranioplasty implants, synthetics such as polyetheretherketone, polymethylmethacrylate, and titanium show a higher primary tear resistance, whereas hydroxyapatite and autologous bone display good biomimetic properties, although the latter has been ascribed a variable reabsorption rate of between 3% and 50%.In short, all cranioplasty procedures and materials have their advantages and disadvantages, and none of the currently available materials meet the criteria required for an ideal implant. Hence, the choice of cranioplasty materials is still essentially reliant on the surgeon's preference.