Surface Oxygen Defect Engineering of A2B2O7 Pyrochlore Semiconductors Boosts the Electrocatalytic Reduction of CO2-to-HCOOH.

The electrocatalytic conversion of inert CO2 to value-added chemical fuels powered by renewable energy is one of the benchmark approaches to address excessive carbon emissions and achieve carbon-neutral energy restructuring. However, the adsorption/activation of supersymmetric CO2 is facing insurmountable challenges that constrain its industrial-scale applications. Here, this theory-guided study confronts these challenges by leveraging the synergies of bimetallic sites and defect engineering, where pyrochlore-type semiconductor A2B2O7 is employed as research platform and the conversion of CO2-to-HCOOH as the model reaction. Specifically, defect engineering intensified greatly the chemisorption-induced CO2 polarization via the bimetallic coordination, thermodynamically beneficial to the HCOOH production via the *HCO2 intermediate. The optimal V-BSO-430 electrocatalyst with abundant surface oxygen vacancies achieved a superior HCOOH yield of 116.7 mmol h-1 cm-2 at -1.2 VRHE, rivalling the incumbent similar reaction systems. Furthermore, the unique catalytic unit featured with a Bi1-Sn-Bi2 triangular structure, which is reconstructed by defect engineering, and altered the pathway of CO2 adsorption and activation to allow the preferential affinity of the suspended O atom in *HCO2 to H. As a result, V-BSO-430 gave an impressive FEHCOOH of 93% at -1.0 VRHE. This study held promises for inspiring the exploration of bimetallic materials from the massive semiconductor database.

Cation Substitution Strategy for Developing Perovskite Oxide with Rich Oxygen Vacancy-Mediated Charge Redistribution Enables Highly Efficient Nitrate Electroreduction to Ammonia.

The electrocatalytic nitrate (NO3-) reduction reaction (eNITRR) is a promising method for ammonia synthesis. However, its efficacy is currently limited due to poor selectivity, largely caused by the inherent complexity of the multiple-electron processes involved. To address these issues, oxygen-vacancy-rich LaFe0.9M0.1O3-δ (M = Co, Ni, and Cu) perovskite submicrofibers have been designed from the starting material LaFeO3-δ (LF) by a B-site substitution strategy and used as the eNITRR electrocatalyst. Consequently, the LaFe0.9Cu0.1O3-δ (LF0.9Cu0.1) submicrofibers with a stronger Fe-O hybridization, more oxygen vacancies, and more positive surface potential exhibit a higher ammonia yield rate of 349 ± 15 µg h-1 mg-1cat. and a Faradaic efficiency of 48 ± 2% than LF submicrofibers. The COMSOL Multiphysics simulations demonstrate that the more positive surface of LF0.9Cu0.1 submicrofibers can induce NO3- enrichment and suppress the competing hydrogen evolution reaction. By combining a variety of in situ characterizations and density functional theory calculations, the eNITRR mechanism is revealed, where the first proton-electron coupling step (*NO3 + H+ + e- → *HNO3) is the rate-determining step with a reduced energy barrier of 1.83 eV. This work highlights the positive effect of cation substitution in promoting eNITRR properties of perovskites and provides new insights into the studies of perovskite-type electrocatalytic ammonia synthesis catalysts.

Label-Free Identification of Carbonaceous Particles Using Nonlinear Optical Microscopy.

The adverse health effects of ambient carbonaceous particles (CPs) such as carbon black (CB), black carbon (BC), and brown carbon (BrC) are becoming more evident and depend on their composition and emission source. Therefore, identifying and quantifying these particles in biological samples are important to better understand their toxicity. Here, we report the development of a nonlinear optical approach for the identification of CPs such as CB and BrC using imaging conditions compatible with biomedical samples. The unique visible light fingerprint of CB and BrC nanoparticles (NPs) upon illumination with a femtosecond (fs) pulsed laser at 1300 nm excitation wavelength is an effective approach for their identification in their biological context. The emission from spectral features of these CPs was investigated with time-domain fluorescence lifetime imaging (FLIM) to further support their identification. This study is performed for different types of CPs embedded in agarose gel as well as in in vitro mammalian cells. The unique nonlinear emissive behavior of CP NPs used for their label-free identification is further complementary with fluorophores typically used for specific staining of biological samples thus providing the relevant bio-context.

Metal Nanocatalyst Sintering Interrogated at Complementary Length Scales.

Metal nanoparticle (NP) sintering is a prime cause of catalyst degradation, limiting its economic lifetime and viability. To date, sintering phenomena are interrogated either at the bulk scale to probe averaged NP properties or at the level of individual NPs to visualize atomic motion. Yet, "mesoscale" strategies which bridge these worlds can chart NP populations at intermediate length scales but remain elusive due to characterization challenges. Here, a multi-pronged approach is developed to provide complementary information on Pt NP sintering covering multiple length scales. High-resolution scanning electron microscopy (HRSEM) and Monte Carlo simulation show that the size evolution of individual NPs depends on the number of coalescence events they undergo during their lifetime. In its turn, the probability of coalescence is strongly dependent on the NP's mesoscale environment, where local population heterogeneities generate NP-rich "hotspots" and NP-free zones during sintering. Surprisingly, advanced in situ synchrotron X-ray diffraction shows that not all NPs within the small NP sub-population are equally prone to sintering, depending on their crystallographic orientation on the support surface. The demonstrated approach shows that mesoscale heterogeneities in the NP population drive sintering and mitigation strategies demand their maximal elimination via advanced catalyst synthesis strategies.

Placental-fetal distribution of carbon particles in a pregnant rabbit model after repeated exposure to diluted diesel engine exhaust.

BACKGROUND: Airborne pollution particles have been shown to translocate from the mother's lung to the fetal circulation, but their distribution and internal placental-fetal tissue load remain poorly explored. Here, we investigated the placental-fetal load and distribution of diesel engine exhaust particles during gestation under controlled exposure conditions using a pregnant rabbit model. Pregnant dams were exposed by nose-only inhalation to either clean air (controls) or diluted and filtered diesel engine exhaust (1 mg/m3) for 2 h/day, 5 days/week, from gestational day (GD) 3 to GD27. At GD28, placental and fetal tissues (i.e., heart, kidney, liver, lung and gonads) were collected for biometry and to study the presence of carbon particles (CPs) using white light generation by carbonaceous particles under femtosecond pulsed laser illumination. RESULTS: CPs were detected in the placenta, fetal heart, kidney, liver, lung and gonads in significantly higher amounts in exposed rabbits compared with controls. Through multiple factor analysis, we were able to discriminate the diesel engine exposed pregnant rabbits from the control group taking all variables related to fetoplacental biometry and CP load into consideration. Our findings did not reveal a sex effect, yet a potential interaction effect might be present between exposure and fetal sex. CONCLUSIONS: The results confirmed the translocation of maternally inhaled CPs from diesel engine exhaust to the placenta which could be detected in fetal organs during late-stage pregnancy. The exposed can be clearly discriminated from the control group with respect to fetoplacental biometry and CP load. The differential particle load in the fetal organs may contribute to the effects on fetoplacental biometry and to the malprogramming of the fetal phenotype with long-term effects later in life.

Site-Sensitive Selective CO2 Photoreduction to CO over Gold Nanoparticles.

We demonstrate a new case of materials-gene engineering to precisely design photocatalysts with the prescribed properties. Based on theoretical calculations, a phase-doping strategy was proposed to regulate the pathways of CO2 conversion over Au nanoparticles (NPs) loaded TiO2 photocatalysts. As a result, the thermodynamic bottleneck of CO2 -to-CO conversion is successfully unlocked by the incorporation of stable twinning crystal planes into face-centered cubic (fcc) phase Au NPs. Compared to bare pristine TiO2 , the activity results showed that the loading of regular fcc-Au NPs raised the CO production by 18-fold but suppressed the selectivity from 84 % to 75 %, whereas Au NPs with twinning (110) and (100) facets boosted the activity by nearly 40-fold and established near unity CO selectivity. This enhancement is shown to originate from a beneficial shift in the surface reactive site energetics arising at the twinned stacking fault, whereby both the CO reaction energy and desorption energy were significantly reduced.

Metal Halide Perovskite Based Heterojunction Photocatalysts.

With fascinating photophysical properties and a strong potential to utilize solar energy, metal halide perovskites (MHPs) have become a prominent feature within photocatalysis research. However, the effectiveness of single MHP photocatalysts is relatively poor. The introduction of a second component to form a heterojunction represents a well-established route to accelerate carrier migration and boost reaction rates, thus increasing the photoactivity. Recently, there have been several scientific advances related to the design of MHP-based heterojunction photocatalysts, including Schottky, type II, and Z-scheme heterojunctions. In this Review, we systematically discuss and critically appraise recent developments in MHP-based heterojunction photocatalysis. In addition, the techniques for identifying the type of active heterojunctions are evaluated and we conclude by briefly outlining the ongoing challenges and future directions for promising photocatalysts based on MHP heterojunctions.

Near-Infrared Light-Driven Photoredox Catalysis by Transition-Metal-Complex Nanodots.

Developing light-harvesting materials with broad spectral response is of fundamental importance in full-spectrum solar energy conversion. We found that, when a series of earth-abundant metal (Cu, Co, Ni and Fe) salts are dissolved in coordinating solvents uniformly dispersed nanodots (NDs) are formed rather than fully dissolving as molecular species. The previously unrecognized formation of this condensed state is ascribed to spontaneous aggregation of molecular transition-metal-complexes (TMCs) via weak intermolecular interactions, which results in redshifted and broadened absorption into the NIR region (200-1100 nm). Typical photoredox reactions, such as carbonylation and oxidative dehydrogenation, well demonstrate the feasibility of efficient utilization of NIR light (λ>780 nm) by TMCs NDs. Our finding provides a conceptually new strategy for extending the absorption towards low energy photons in solar energy harvesting and conversion via photoredox transformations.

Arabinoxylan, ß-glucan and pectin in barley and malt endosperm cell walls: a microstructure study using CLSM and cryo-SEM.

The architecture of endosperm cell walls in Hordeum vulgare (barley) differs remarkably from that of other grass species and is affected by germination or malting. Here, the cell wall microstructure is investigated using (bio)chemical analyses, cryogenic scanning electron microscopy (cryo-SEM) and confocal laser scanning microscopy (CLSM) as the main techniques. The relative proportions of ß-glucan, arabinoxylan and pectin in cell walls were 61, 34 and 5%, respectively. The average thickness of a single endosperm cell wall was 0.30 µm, as estimated by the cryo-SEM analysis of barley seeds, which was reduced to 0.16 µm after malting. After fluorescent staining, 3D confocal multiphoton microscopy (multiphoton CLSM) imaging revealed the complex cell wall architecture. The endosperm cell wall is composed of a structure in which arabinoxylan and pectin are colocalized on the outside, with ß-glucan depositions on the inside. During germination, arabinoxylan and ß-glucan are hydrolysed, but unlike ß-glucan, arabinoxylan remains present in defined cell walls in malt. Integrating the results, an enhanced model for the endosperm cell walls in barley is proposed.

Trojans That Flip the Black Phase: Impurity-Driven Stabilization and Spontaneous Strain Suppression in γ-CsPbI3 Perovskite.

The technological progress and widespread adoption of all-organic CsPbI3 perovskite devices is hampered by its thermodynamic instability at room temperature. Because of its inherent tolerance toward deep trap formation, there has been no shortage to exploring which dopants can improve the phase stability. While the relative size of the dopant is important, an assessment of the literature suggests that its relative size and impact on crystal volume do not always reveal what will beneficially shift the phase transition temperature. In this perspective, we analyze the changes in crystal symmetry of CsPbI3 perovskite as it transforms from a thermodynamically stable high-temperature cubic (α) structure into its distorted low-temperature tetragonal (ß) and unstable orthorhombic (γ) perovskite structures. Quantified assessment of the symmetry-adapted strains which are introduced due to changes in temperature and composition show that the stability of γ-CsPbI3 is best rationalized from the point of view of crystal symmetry. In particular, improved thermal-phase stability is directly traced to the suppression of spontaneous strain formation and increased crystal symmetry at room temperature.

Label-free detection of uptake, accumulation, and translocation of diesel exhaust particles in ex vivo perfused human placenta.

BACKGROUND: Pregnant women and developing fetuses comprise a particularly vulnerable population as multiple studies have shown associations between prenatal air pollution exposure and adverse pregnancy outcomes. However, the mechanisms underlying the observed developmental toxicity are mostly unknown, in particular, if pollution particles can cross the human placenta to reach the fetal circulation. RESULTS: Here, we investigated the accumulation and translocation of diesel exhaust particles (DEPs), as a model particle for combustion-derived pollution, in human perfused placentae using label-free detection by femtosecond pulsed laser illumination. The results do not reveal a significant particle transfer across term placentae within 6 h of perfusion. However, DEPs accumulate in placental tissue, especially in the syncytiotrophoblast layer that mediates a wealth of essential functions to support and maintain a successful pregnancy. Furthermore, DEPs are found in placental macrophages and fetal endothelial cells, showing that some particles can overcome the syncytiotrophoblasts to reach the fetal capillaries. Few particles are also observed inside fetal microvessels. CONCLUSIONS: Overall, we show that DEPs accumulate in key cell types of the placental tissue and can cross the human placenta, although in limited amounts. These findings are crucial for risk assessment and protection of pregnant women and highlight the urgent need for further research on the direct and indirect placenta-mediated developmental toxicity of ambient particulates.

Chemical Imaging of Hierarchical Porosity Formation within a Zeolite Crystal Visualized by Small-Angle X-Ray Scattering and In-Situ Fluorescence Microscopy.

Introducing hierarchical porosity to zeolites is vital for providing molecular access to microporous domains. Yet, the dynamics of meso- and macropore formation has remained elusive and pore space ill-characterized by a lack of (in situ) microscopic tools sensitive to nanoporosity. Here, we probe hierarchical porosity formation within a zeolite ZSM-5 crystal in real-time by in situ fluorescence microscopy during desilication. In addition, we introduce small-angle X-ray scattering microscopy as novel characterization tool to map intracrystal meso- and macropore properties. It is shown that hierarchical porosity formation initiates at the crystal surface and propagates to the crystal core via a pore front with decreasing rate. Also, hierarchical porosity only establishes in specific (segments of) subunits which constitute ZSM-5. Such space-dependent meso- and macroporosity implies local discrepancies in diffusion, performance and deactivation behaviors even within a zeolite crystal.

The Hole-Tunneling Heterojunction of Hematite-Based Photoanodes Accelerates Photosynthetic Reaction.

Single-atom metal-insulator-semiconductor (SMIS) heterojunctions based on Sn-doped Fe2 O3 nanorods (SF NRs) were designed by combining atomic deposition of an Al2 O3 overlayer with chemical grafting of a RuOx hole-collector for efficient CO2 -to-syngas conversion. The RuOx -Al2 O3 -SF photoanode with a 3.0 nm thick Al2 O3 overlayer gave a >5-fold-enhanced IPCE value of 52.0 % under 370 nm light irradiation at 1.2 V vs. Ag/AgCl, compared to the bare SF NRs. The dielectric field mediated the charge dynamics at the Al2 O3 /SF NRs interface. Accumulation of long-lived holes on the surface of the SF NRs photoabsorber aids fast tunneling transfer of hot holes to single-atom RuOx species, accelerating the O2 -evolving reaction kinetics. The maximal CO-evolution rate of 265.3 mmol g-1 h-1 was achieved by integration of double SIMS-3 photoanodes with a single-atom Ni-doped graphene CO2 -reduction-catalyst cathode; an overall quantum efficiency of 5.7 % was recorded under 450 nm light irradiation.

Matrix deformations around angiogenic sprouts correlate to sprout dynamics and suggest pulling activity.

Angiogenesis is the formation of new blood vessels from the pre-existing vasculature. It is essential for normal tissue growth and regeneration, and also plays a key role in many diseases [Carmeliet in Nat Med 9:653-660, 2003]. Cytoskeletal components have been shown to be important for angiogenic sprout initiation and maintenance [Kniazeva and Putnam in Am J Physiol 297:C179-C187, 2009] as well as endothelial cell shape control during invasion [Elliott et al. in Nat Cell Biol 17:137-147, 2015]. The exact nature of cytoskeleton-mediated forces for sprout initiation and progression, however, remains poorly understood. Questions on the importance of tip cell pulling versus stalk cell pushing are to a large extent unanswered, which among others has to do with the difficulty of quantifying and resolving those forces in time and space. We developed methods based on time-lapse confocal microscopy and image processing-further termed 4D displacement microscopy-to acquire detailed, spatially and temporally resolved extracellular matrix (ECM) deformations, indicative of cell-ECM mechanical interactions around invading sprouts. We demonstrate that matrix deformations dependent on actin-mediated force generation are spatio-temporally correlated with sprout morphological dynamics. Furthermore, sprout tips were found to exert radially pulling forces on the extracellular matrix, which were quantified by means of a computational model of collagen ECM mechanics. Protrusions from extending sprouts mostly increase their pulling forces, while retracting protrusions mainly reduce their pulling forces. Displacement microscopy analysis further unveiled a characteristic dipole-like deformation pattern along the sprout direction that was consistent among seemingly very different sprout shapes-with oppositely oriented displacements at sprout tip versus sprout base and a transition zone of negligible displacements in between. These results demonstrate that sprout-ECM interactions are dominated by pulling forces and underline the key role of tip cell pulling for sprouting angiogenesis.

X-Ray-Induced Growth Dynamics of Luminescent Silver Clusters in Zeolites.

Herein, AlKα X-rays are used to drive the growth of luminescent silver clusters in zeolites. The growth of the silver species is tracked using Auger spectroscopy and fluorescence microscopy, by monitoring the evolution from their ions to luminescent clusters and then metallic, dark nanoparticles. It is shown that the growth rate in different zeolites is determined by the mobility of the silver ions in the framework and that the growth dynamics in calcined samples obeys the Hill-Langmuir equation for noncooperative binding. Comparison of the optical properties of X-ray-grown silver clusters with silver clusters formed by standard heat treatment indicates that the latter have a higher specificity toward the formation of luminescent clusters of a specific (small) nuclearity, whereas the former produce a wide distribution of cluster species as well as larger nanoparticles.

Vapor-Phase Linker Exchange of the Metal-Organic Framework ZIF-8: A Solvent-Free Approach to Post-synthetic Modification.

Zeolitic imidazolate frameworks (ZIFs) are a sub-class of metal-organic frameworks (MOFs). Although generally stable, ZIFs can undergo post-synthetic linker exchange (PSLE) in solution under mild conditions. Herein, we present a novel, solvent-free approach to post-synthetic linker exchange through exposure to linker vapor.

Hot π-Electron Tunneling of Metal-Insulator-COF Nanostructures for Efficient Hydrogen Production.

A metal-insulator-semiconductor (MIS) photosystem based on covalent organic framework (COF) semiconductors was designed for robust and efficient hydrogen evolution under visible-light irradiation. A maximal H2 evolution rate of 8.42 mmol h-1 g-1 and a turnover frequency of 789.5 h-1 were achieved by using a MIS photosystem prepared by electrostatic self-assembly of polyvinylpyrrolidone (PVP) insulator-capped Pt nanoparticles (NPs) with the hydrophilic imine-linked TP-COFs having =C=O-H-N= hydrogen-bonding groups. The hot π-electrons in the photoexcited n-type TP-COF semiconductors can be efficiently extracted and tunneled to Pt NPs across an ultrathin PVP insulating layer to reduce protons to H2 . Compared to the Schottky-type counterparts, the COF-based MIS photosystems give a 32-fold-enhanced carrier efficiency, attributed to the combined enhancement of photoexcitation rate, charge separation, and oxidation rate of holes accumulated in the valence band of the TP-COF semiconductor.

A Titanium(IV)-Based Metal-Organic Framework Featuring Defect-Rich Ti-O Sheets as an Oxidative Desulfurization Catalyst.

While titanium-based metal-organic frameworks (MOFs) have been widely studied for their (photo)catalytic potential, only a few TiIV MOFs have been reported owing to the high reactivity of the employed titanium precursors. The synthesis of COK-47 is now presented, the first Ti carboxylate MOF based on sheets of TiIV O6 octahedra, which can be synthesized with a range of different linkers. COK-47 can be synthesized as an inherently defective nanoparticulate material, rendering it a highly efficient catalyst for the oxidation of thiophenes. Its structure was determined by continuous rotation electron diffraction and studied in depth by X-ray total scattering, EXAFS, and solid-state NMR. Furthermore, its photoactivity was investigated by electron paramagnetic resonance and demonstrated by catalytic photodegradation of rhodamine 6G.

Reversible and Site-Dependent Proton-Transfer in Zeolites Uncovered at the Single-Molecule Level.

Zeolite activity and selectivity is often determined by the underlying proton and hydrogen-transfer reaction pathways. For the first time, we use single-molecule fluorescence microscopy to directly follow the real-time behavior of individual styrene-derived carbocationic species formed within zeolite ZSM-5. We find that intermittent fluorescence and remarkable photostability of carbocationic intermediates strongly depend on the local chemical environment imposed by zeolite framework and guest solvent molecules. The carbocationic stability can be additionally altered by changing para-substituent on the styrene moiety, as suggested by DFT calculations. Thermodynamically unstable carbocations are more likely to switch between fluorescent (carbocationic) and dark (neutral) states. However, the rate constants of this reversible change can significantly differ among individual carbocations, depending on their exact location in the zeolite framework. The lifetimes of fluorescent states and reversibility of the process can be additionally altered by changing the interaction between dimeric carbocations and solvated Brønsted acid sites in the MFI framework. Advanced multidimensional magic angle spinning solid-state NMR spectroscopy has been employed for the accurate structural elucidation of the reaction products during the zeolite-catalyzed dimerization of styrene in order to corroborate the single-molecule fluorescence microscopy data. This complementary approach of single-molecule fluorescence microscopy, NMR, and DFT collectively indicates that the relative stability of the carbocationic and the neutral states largely depends on the substituent and the local position of the Brønsted acid site within the zeolite framework. As a consequence, new insights into the host-guest chemistry between the zeolite and aromatics, in terms of their surface mobility and reactivity, have been obtained.

Silver Clusters in Zeolites: From Self-Assembly to Ground-Breaking Luminescent Properties.

Interest for functional silver clusters (Ag-CLs) has rapidly grown over years due to large advances in the field of nanoscale fabrication and materials science. The continuous development of strategies to fabricate small-scale silver clusters, together with their interesting physicochemical properties (molecule-like discrete energy levels, for example), make them very attractive for a wide variety of applied research fields, from biotechnology and the environmental sciences to fundamental chemistry and physics. Apart from useful catalytic properties, silver clusters (Agn, n < 10) were recently shown to also exhibit exceptional optical properties. The optical properties and performance of Ag-CLs offer strong potential for their integration into appealing micro(nano)-optoelectronic devices. To date, however, the rational design and directed synthesis of Ag-CLs with specific functionalities has remained elusive. The inability for rational design stems mainly from a lack of understanding of their novel atomic-scale phenomena. This is because accurately studying silver cluster systems at such a scale is hindered by the perturbations introduced during exposure to various experimental probes. For instance, silver possesses a strong tendency to cluster and form ever-larger Ag aggregates while probed with high-energy electron beams and X-ray irradiation. As well, there exists a need to provide a stabilizing environment for which Agnδ+ clusters can persist, setting up a complex interacting guest-host system, as isolated silver clusters are confined within a suitable hosting medium. Fundamental research into Agnδ+ formation mechanisms and their important optical properties is paramount to establishing truly informed synthesis protocols. Over recent years, we have developed several protocols for the ship-in-a-bottle synthesis of highly luminescent Ag-CLs within the microporous interiors of zeolite frameworks. This approach has yielded materials displaying a wide variety of optical properties, offering a spectrum of possible applications, from nano(micro)photonic devices to smart luminescent labels and sensors. The versatility of the Ag-zeolite multicomponent system is directly related to the intrinsic and complex tunability of the system as a whole. There are several key zeolite parameters that confer properties to the clusters, namely, the framework Si/Al ratio, choice of counterbalancing ions, silver loading, and zeolite topology, and cannot be overlooked. This Account is intended to shed light on the current state-of-the-art of luminescent Ag-CLs confined in zeolitic matrices, emphasizing the use of combinatorial approaches to overcome problems associated with the correct characterization and correlation of their structural, electronic, and photoluminescence properties, all to establish the important design principles for developing functional silver-zeolite-based materials. Additionally, examples of emerging applications and future perspectives for functional luminescent Ag-zeolite materials are addressed in this Account.