Multiscale Process Intensification of Waste Valorization Reactions.

ConspectusThe central theme of this Account is the development of intensified and sustainable chemical processes for the sequestration of CO2 in synergism with the utilization of wastes of industrial, urban, and agricultural origins. A challenge when working with solid waste-fluid reactions is that mass transfer limitations across solid-liquid, solid-gas, and gas-liquid interfaces and unfavorable thermodynamics lead to slow reaction rates, incomplete reaction conversions, high energy expenditure and processing costs, and inadequate product properties. The traditional macroscale approaches to overcoming slurry reaction limitations can be effective; however, they come at a cost to the environment. In the treatment or valorization of low-grade and waste resources, such conventional approaches are often unfeasible on an industrial scale. Sustainable solutions are thus needed.In the last six years, we have been exploring and developing approaches to overcoming reaction rate limitations of slurry reactions of environmental relevance by concurrently applying process intensification strategies and multiscale engineering approaches. The scientific approach has relied on laboratory-scale experiments to test and refine the devised multiscale process intensification strategies, with thermodynamic and computational modeling work supporting the experimental work and with advanced characterization techniques being used to elucidate reaction and transport mechanisms and aid the development of nanoscale reaction models and micro- and macroscale process models. The research streams, associated with the four key references, discussed next are (a) brine carbonation; (b) mineral carbonation and enhanced weathering; (c) process intensification and integration; and (d) characterization techniques.Within the four research streams, a number of mineral carbonation processes have been investigated and can be classified as (i) ambient weathering and carbonation; (ii) gas-(wet) solid accelerated carbonation; (iii) aqueous accelerated carbonation; (iv) supercritical accelerated carbonation; and (v) CO2 mineralization from brine. In some cases, the research was aimed at producing valuable products with reduced environmental risk or a reduced carbon footprint, such as an organomineral fertilizer and zeolites. In other cases, the aim was to assess the reactivity of minerals to match the right feedstock with the right carbonation process, in view of maximizing net carbon sequestration. There were also cases where the carbonation process was reimagined by the use of innovative reaction conditions, reactors, and reagents. The experience with accelerated weathering and carbonation in engineered processes has been translated into the field of enhanced rock weathering (ERW) in agriculture, where the multidisciplinary approach used has served to advance ERW science and technology in ways that have had a resounding effect on recent commercial deployment.The completed research serves to encourage the adoption of process intensification technologies in place of conventional processes, in industry and among the research community, and to catalyze the development of the types of sustainable processes required by the chemical, metallurgical, and minerals industries (which are critical to the green transition) to reduce their environmental impact and carbon emissions. Moreover, the multiscale process intensification approaches developed may also be extended to other industrial, urban, and agricultural processes where the reduction of energy intensity, carbon intensity, and environmental footprint could be achieved.

Urban Farming with Enhanced Rock Weathering As a Prospective Climate Stabilization Wedge.

With no single carbon capture and sequestration solution able to limit the global temperature rise to 1.5-2.0 °C by 2100, additional climate stabilization measures are needed to complement current mitigation approaches. Urban farming presents an easy-to-adopt pathway toward carbon neutrality, unlocking extensive urban surface areas that can be leveraged to grow food while sequestering CO2. Urban farming involves extensive surface areas, such as roofs, balconies, and vertical spaces, allowing for soil presence and atmospheric carbon sequestration through air-to-soil contact. In this viewpoint we also advocate the incorporation of enhanced rock weathering (ERW) into urban farming, providing a further opportunity for this recognized negative emissions technology that is gaining momentum worldwide to gain greater utilization.

Assessment of geochemical modeling applications and research hot spots-a year in review.

Geochemical modeling has been employed in several fields of science and engineering in recent years. This review seeks to provide an overview of case studies that applied geochemical modeling in the 2019 year, which includes over 250 articles. This review is intended to inform new users on the possibilities that geochemical modeling brings, while also informing existing and past users on its latest developments. The survey of studies was conducted with an emphasis on the modeling techniques, the objective of studies, the prevalent simulated variables and the use of specific software packages. The analysis showed that geochemical modeling is still predominantly employed in experimental projects and in the form of equilibrium modeling. PHREEQC and Visual MINTEQ were recognized as the most popular software packages for simulating a wide range of processes, using equilibrium or other geochemical modeling forms. The study of fluid-rock interactions and pollution and remediation processes can be regarded as the principal geochemical modeling objectives, constituting 37% and 36% of the reviewed studies, respectively. Focusing on fluid-rock interactions, hydrogeochemical processes, carbon capture and storage and enhanced oil recovery have been the main topics examined with geochemical modeling. Assessments of the toxicity of metals in terms of leachate and mobilization, as well as their removal from soil and water systems, have been major topics investigated with the aid of geochemical modeling in terms of pollution and remediation research. It was found that the scholars benefit from geochemical modeling in their research both as a main technique and as an accessory tool. Saturation index, elemental concentration and speciation, mineral mass and composition and pH were among the most common variables modeled in reviewed studies. Geochemical modeling has gained a wider user base in recent years, and many research groups have used it in consecutive studies to deepen knowledge. However, much potential for further dissemination still remains.

Efficient generation of targeted and controlled mutational events in porcine cells using nuclease-directed homologous recombination.

BACKGROUND: Nuclease-based genome editing has rapidly sped the creation of new models of human disease. These techniques also hold great promise for the future of clinical xenotransplantation and cell-based therapies for cancer or immunodeficient pathology. However, to fully realize the potential of nuclease editing tools, the efficiency and precision of their application must be optimized. The object of this study was to use nonintegrating selection and nuclease-directed homologous recombination to efficiently control the genetic modification of the porcine genome. METHODS: Clustered randomly integrating spaced palindromic repeats and associated Cas9 protein (CRISPR/Cas9)-directed mutagenesis with a single-guide RNA target was designed to target the alpha-1,3-galactosyltransferase locus (GGTA1) of the porcine genome. A vector expressing a single-guide RNA, Cas9 protein, and green fluorescent protein was used to increase plasmid-delivered mutational efficiency when coupled with fluorescence sorting. Single and double-strand DNA oligonucleotides with a restriction site replacing the start codon were created with variable homology lengths surrounding the mutational event site. Finally, a transgene construct was flanked with 50 base pairs of homology directed immediately 5' to a nuclease cut site. These products were introduced to cells with a constant concentration of CRISPR/cas9 vector. Phenotype-specific mutational efficiency was measured by flow cytometer. Controlled homologous insertion was measured by Sanger sequence, restriction enzyme digest and flow cytometry. RESULTS: Expression of a fluorescence protein on the Cas9 vector functioned as a nonintegrating selection marker. Selection by this marker increased phenotype-silencing mutation rates from 3.5% to 82% (P = 0.0002). Insertion or deletion mutation increased from 11% to 96% (P = 0.0007). Co-transfection with homologous DNA oligonucleotides increased the aggregate phenotype-silencing mutation rates up to 22% and increased biallelic events. Single-strand DNA was twice as efficient as double-strand DNA. Furthermore, nuclease-mediated insertion by homology-directed repair successfully drove locus-specific transgene expression in the porcine genome. CONCLUSIONS: A nonintegrating selection strategy based on fluorescence expression can increase the mutational efficiency of the CRISPR/Cas9 system. The precision of this system can be increased by the addition of a very short homologous template sequence and can serve as a method for locus-specific transgene delivery. Together these strategies may be used to efficiently control mutational events. This system may be used to better use the potential of nuclease-mediated genomic editing.

Efficient generation of genetically distinct pigs in a single pregnancy using multiplexed single-guide RNA and carbohydrate selection.

BACKGROUND: Manipulating the pig genome to increase compatibility with human biology may facilitate the clinical application of xenotransplantation. Genetic modifications to pig cells have been made by sequential recombination in fetal fibroblasts and liver-derived cells followed by cross-breeding or somatic cell nuclear transfer. The generation of pigs for research or organ donation by these methods is slow, expensive and requires technical expertise. A novel system incorporating the bacterial nuclease Cas9 and single-guide RNA targeting a 20 nucleotide site within a gene can be expressed from a single plasmid leading to a double-strand break and gene disruption. Coexpression of multiple unique single-guide RNA can modify several genetic loci in a single step. We describe a process for increasing the efficiency of selecting cells with multiple genetic modifications. METHODS: We used the CRISPR/Cas system to target the GGTA1, CMAH and putative iGb3S genes in pigs that have been naturally deleted in humans. Cells lacking galactose α-1,3 galactose (α-Gal) were negatively selected by an IB4 lectin/magnetic bead. α-Gal negative multiplexed single-guide RNA-treated cells were used for somatic cell nuclear transfer (SCNT) and transferred to fertile sows. We examined the levels of α-Gal and Neu5Gc expression of 32 day fetuses and piglets and analyzed the targeted genes by DNA sequencing. RESULTS: Liver-derived cells treated with multiple single-guide RNA and selected for an α-Gal null phenotype were significantly more likely to also carry mutations in simultaneously targeted genes. Multiplex single-guide RNA-treated cells used directly for SCNT without further genetic selection produced piglets with deletions in the targeted genes but also created double- and triple-gene KO variations. CRISPR/Cas-treated cells grew normally and yielded normal liters of healthy piglets via somatic cell nuclear transfer. CONCLUSIONS: The CRISPR/Cas system allows targeting of multiple genes in a single reaction with the potential to create pigs of one genetic strain or multiple genetic modifications in a single pregnancy. The application of this phenotypic selection strategy with multiplexed sgRNA and the Cas9 nuclease has accelerated our ability to produce and evaluate pigs important to xenotransplantation.

Impacts of nickel nanoparticles on mineral carbonation.

This work presents experimental results regarding the use of pure nickel nanoparticles (NiNP) as a mineral carbonation additive. The aim was to confirm if the catalytic effect of NiNP, which has been reported to increase the dissolution of CO2 and the dissociation of carbonic acid in water, is capable of accelerating mineral carbonation processes. The impacts of NiNP on the CO2 mineralization by four alkaline materials (pure CaO and MgO, and AOD and CC steelmaking slags), on the product mineralogy, on the particle size distribution, and on the morphology of resulting materials were investigated. NiNP-containing solution was found to reach more acidic pH values upon CO2 bubbling, confirming a higher quantity of bicarbonate ions. This effect resulted in acceleration of mineral carbonation in the first fifteen minutes of reaction time when NiNP was present. After this initial stage, however, no benefit of NiNP addition was seen, resulting in very similar carbonation extents after one hour of reaction time. It was also found that increasing solids content decreased the benefit of NiNP, even in the early stages. These results suggest that NiNP has little contribution to mineral carbonation processes when the dissolution of alkaline earth metals is rate limiting.

Comparative study of ageing, heat treatment and accelerated carbonation for stabilization of municipal solid waste incineration bottom ash in view of reducing regulated heavy metal/metalloid leaching.

This study compared the performance of four different approaches for stabilization of regulated heavy metal and metalloid leaching from municipal solid waste incineration bottom ash (MSWI-BA): (i) short term (three months) heap ageing, (ii) heat treatment, (iii) accelerated moist carbonation, and (iv) accelerated pressurized slurry carbonation. Two distinct types of MSWI-BA were tested in this study: one originating from a moving-grate furnace incineration operation treating exclusively household refuse (sample B), and another originating from a fluid-bed furnace incineration operation that treats a mixture of household and light industrial wastes (sample F). The most abundant elements in the ashes were Si (20-27 wt.%) and Ca (16-19 wt.%), followed by significant quantities of Fe, Al, Na, S, K, Mg, Ti, and Cl. The main crystalline substances present in the fresh ashes were Quartz, Calcite, Apatite, Anhydrite and Gehlenite, while the amorphous fraction ranged from 56 to 73 wt.%. The leaching values of all samples were compared to the Flemish (NEN 7343) and the Walloon (DIN 38414) regulations from Belgium. Batch leaching of the fresh ashes at natural pH showed that seven elements exceeded at least one regulatory limit (Ba, Cr, Cu, Mo, Pb, Se and Zn), and that both ashes had excess basicity (pH > 12). Accelerated carbonation achieved significant reduction in ash basicity (9.3-9.9); lower than ageing (10.5-12.2) and heat treatment (11.1-12.1). For sample B, there was little distinction between the leaching results of ageing and accelerated carbonation with respect to regulatory limits; however carbonation achieved comparatively lower leaching levels. Heat treatment was especially detrimental to the leaching of Cr. For sample F, ageing was ineffective and heat treatment had marginally better results, while accelerated carbonation delivered the most effective performance, with slurry carbonation meeting all DIN limits. Slurry carbonation was deemed the most effective treatment process, achieving consistently significant leaching stabilization, while also effectively washing out Cl ions, a requirement for the utilization of the ashes in construction applications. The benefits of carbonation were linked to the formation of significant quantities of Ca-carbonates, including appreciable quantities of the Aragonite polymorph formed in the slurry carbonated samples.

Constraining the Capacity of Global Croplands to CO2 Drawdown via Mineral Weathering.

Terrestrial enhanced weathering of alkaline silicate minerals is a promising climate change mitigation strategy with the potential to limit the global temperature rise. The formation and accumulation of pedogenic carbonate and bicarbonate in soils/subsoils and groundwater offers a large sink for C storage; the amount of soil inorganic carbon (SIC) presently held within soils has been estimated to be 720-950 Gt of C. These values can be augmented by the addition of a variety of calcium and magnesium silicates via enhanced weathering. While the concept of the application of finely milled silicate rocks for faster weathering rates is well established, there has been limited discussion on the role of local climate, natural SIC content (i.e., the SIC innately present in the soil), and soil pH (among other important agronomic factors) on silicate weathering when applied to croplands, especially in view that the aim is to establish terrestrial enhanced weathering as a carbon dioxide removal (CDR) strategy on a global scale. In this work, we emphasized the importance of soil pH and soil temperature on silicate weathering and looked to estimate an upper limit of (i.e., constrain) the global capacity until the year 2100 for enhanced rock weathering (ERW) to draw down CO2 in the form of accumulated pedogenic carbonate or soluble bicarbonate. We assessed the global spatial distribution of cropland soil pH, which serves as a proxy for local innate SIC; annual rate of pluvial (rainfall) precipitation; and soil temperature, and found that the potential CO2 drawdown difference between faster and slower weathering silicates is narrower in Asia, Africa, and South America, while the gap is larger for Europe, North America, and Oceania.

Urban mining of municipal solid waste incineration (MSWI) residues with emphasis on bioleaching technologies: a critical review.

Metals are essential in our daily lives and have a finite supply, being simultaneously contaminants of concern. The current carbon emissions and environmental impact of mining are untenable. We need to reclaim metals sustainably from secondary resources, like waste. Biotechnology can be applied in metal recovery from waste streams like fly ashes and bottom ashes of municipal solid waste incineration (MSWI). They represent substantial substance flows, with roughly 46 million tons of MSWI ashes produced annually globally, equivalent in elemental richness to low-grade ores for metal recovery. Next-generation methods for resource recovery, as in particular bioleaching, give the opportunity to recover critical materials and metals, appropriately purified for noble applications, in waste treatment chains inspired by circular economy thinking. In this critical review, we can identify three main lines of discussion: (1) MSWI material characterization and related environmental issues; (2) currently available processes for recycling and metal recovery; and (3) microbially assisted processes for potential recycling and metal recovery. Research trends are chiefly oriented to the potential exploitation of bioprocesses in the industry. Biotechnology for resource recovery shows increasing effectiveness especially downstream the production chains, i.e., in the waste management sector. Therefore, this critical discussion will help assessing the industrial potential of biotechnology for urban mining of municipal, post-combustion waste.

Comparative Static and Dynamic Analyses of Solvents for Removal of Asphaltene and Wax Deposits above- and below-Surface at an Iranian Carbonate Oil Field.

During production from oil wells, the deposition of asphaltene and wax at surface facilities and porous media is one of the major operational challenges. The crude oil production rate is significantly reduced due to asphaltene deposition inside the reservoir. In addition, the deposition of these solids inside the surface facilities is costly to oil companies. In this study, the efficiency of different solvents in dissolving asphaltene and wax was investigated through static and dynamic tests. The analysis of solid deposits from the surface choke of one of the Iranian carbonate oil fields showed that they consisted of 41.3 wt % asphaltene, and the balance was predominantly wax. In addition, the asphaltenes obtained from the surface choke solid deposits had a more complex structure than that of asphaltenes extracted from the crude oil itself. The static tests showed that xylene, toluene, gasoline, kerosene, and gas condensate had the highest efficiencies in dissolving solid deposits; conversely, diesel had a negative impact on dissolving solid deposits. Static tests on pure asphaltene showed that, among the tested solvents, gas condensate and diesel had a negative effect on the solubility of asphaltene. The dynamic core flooding results showed that asphaltene deposition inside the cores reduced the permeability by 79-91%. Among the tested solvents, xylene, gasoline, and kerosene resulted in the highest efficacy in restoring the damaged permeability, and higher efficiency was obtained with an equivalent solvent injection rate of 1 bbl/min versus 3 bbl/min.

Comparative bibliometric trends of microplastics and perfluoroalkyl and polyfluoroalkyl substances: how these hot environmental remediation research topics developed over time.

Microplastics (MPs) and per- and polyfluoroalkyl substances (PFAS) are ubiquitous in the environment due to consumer and industrial use. These compounds are very persistent in the environment and human body, which has made them hot environmental topics in recent years; but how this did come about? What factors have been driving the trends of their publication records, the public concern over environmental and public health issues caused by these pollutants, and the collaboration between scientists, regulators, and policymakers to solve these problems? In this paper, to understand these factors and contrast them between the two hot topics ("PFAS" and "MPs"), the changes in the bibliometric and scientometric trends of their publication records (extracted from the Web of Science from 1990 to 2020) have been visualized over time based on different classification perspectives, such as year, country, source, and organization. According to the analyses performed on these records, utilizing publication ratios and principal component and cluster analyses, in recent years (beginning in 2018) research topics related to MPs have surpassed PFAS topics. In addition, the economic, social, and geographical conditions of the top 20 countries with the highest number of publications in MPs and PFAS were explored to identify which countries are most concerned about each of these topics and why. For instance, PFAS research topics were more prevalant in countries with larger water areas compared to land area; while MPs topic were more prevelant in countries that produced more plastic wastes, and had higher landfilling and recycling rates and greater proportion of treated wastewater.

Nutrient-doped synthetic silicates for enhanced weathering, remineralization and fertilization on agricultural lands of global cold regions - A perspective on the research ahead.

There is now a dire demand for negative emissions technologies (which sequester CO2 from the atmosphere) that can be rapidly deployed, are scalable, and are demonstrably safe and effective. Enhanced weathering of silicate minerals has demonstrated a significant potential for CO2 capture and sequestration by the formation of pedogenic carbonates in soils, subsoils, and sediments. This technique has also been shown to deliver fruitful results in terms of improving soil health, and in turn plant health, through remineralization. The silicate minerals that possess the highest weathering rates (e.g., wollastonite), are relatively rare in nature, whereas the abundant ones (e.g., anorthite and forsterite) have a slower pace of weathering, especially in colder and drier climates such as found in the extensive agricultural lands of Western Canada and the Western United States. Herein, we offer a perspective on the opportunities for computational studies targeting atomic-scale interaction of CO2 with silicates and synthesis of fast-weathering silicates (such as larnite and bredigite), whose composition can be tuned to also support soil fertilization and remineralization, and whose production must be integrated with green and carbon-neutral technologies to ensure net-negative life cycle emissions.

Beneficial use of animal hides for abattoir and tannery waste management: a review of unconventional, innovative, and sustainable approaches.

The art of using animal hides, an apparent waste from the meat processing industry, goes back to the dawn of humanity and was highly demanded for leather manufacturing. In Ontario (Canada), small- and medium-sized abattoirs process all together approximately 300,000 sheep and 100,000 cattle per year, and for decades, the collected hides and skins have been processed into leather. However, there has been a decline in the price as well as in the demand for animal hides in the last few years, mainly due to increased customer interest in synthetic materials. This has significantly impacted small- and medium-scale abattoirs as they are left with no other option but to landfill these hides, which is not a sustainable approach. This review discusses the alternative approaches available for the management of animal hides, including those also suitable for tannery residues, which can economically and environmentally benefit society. These benefits include the production or generation of energy, compost, yarn, and medicinal goods, among other beneficial uses.

Mineral-Soil-Plant-Nutrient Synergisms of Enhanced Weathering for Agriculture: Short-Term Investigations Using Fast-Weathering Wollastonite Skarn.

Enhanced weathering is a proposed carbon dioxide removal (CDR) strategy to accelerate natural carbon sequestration in soils via the amendment of silicate rocks to agricultural soils. Among the suitable silicates (such as basalt and olivine), the fast-weathering mineral wollastonite (CaSiO3) stands out. Not only does the use of wollastonite lead to rapid pedogenic carbonate formation in soils, it can be readily detected for verification of carbon sequestration, but its weathering within weeks to months influences soil chemistry and plant growth within the same crop cycle of its application. This enables a variety of short-term experimental agronomic studies to be conducted to demonstrate in an accelerated manner what could take years to be observed with more abundant but slower weathering silicates. This study presents the results of three studies that were conducted to investigate three distinct aspects of wollastonite skarn weathering in soils in the context of both agricultural and horticultural plants. The first study investigated the effect of a wide range of wollastonite skarn dosages in soil (1.5-10 wt.%) on the growth of green beans. The second study provides insights on the role of silicon (Si) release during silicate weathering on plant growth (soybeans and lettuce). The third study investigated the effect of wollastonite skarn on the growth of spring rye when added to soil alongside a nitrogen-based coated fertilizer. The results of these three studies provide further evidence that amending soil with crushed silicate rocks leads to climate-smart farming, resulting in inorganic carbon sequestration, as well as better plant growth in agricultural (soybean and spring rye) and horticultural (green bean and lettuce) crops. They also demonstrate the value of working with wollastonite skarn as a fast-weathering silicate rock to accelerate our understanding of the mineral-soil-plant-nutrient synergism of enhanced weathering.

Controlled release fertilizers (CRFs) for climate-smart agriculture practices: a comprehensive review on release mechanism, materials, methods of preparation, and effect on environmental parameters.

Fertilizers play an essential role in increasing crop yield, maintaining soil fertility, and provide a steady supply of nutrients for plant requirements. The excessive use of conventional fertilizers can cause environmental problems associated with nutrient loss through volatilization in the atmosphere, leaching to groundwater, surface run-off, and denitrification. To mitigate environmental issues and improve the longevity of fertilizer in soil, controlled release fertilizers (CRFs) have been developed. The application of CRFs can reduce the loss of nutrients, provide higher nutrient use efficiency, and improve soil health simultaneously to achieve the goals of climate-smart agricultural (CSA) practices. The major findings of this review paper are (1) CRFs can prevent direct exposure of fertilizer granule to soil and prevent loss of nutrients such as nitrate and nitrous oxide emissions; (2) CRFs are less affected by the change in environmental parameters, and that can increase longevity in soil compared to conventional fertilizers; and (3) CRFs can maintain required soil nitrogen levels, increase water retention, reduce GHG emissions, lead to optimum pH for plant growth, and increase soil organic matter content. This paper could give good insights into the ongoing development and future perspectives of CRFs for CSA practices.

Climate change/global warming/climate emergency versus general climate research: comparative bibliometric trends of publications.

This article presents and discusses the scientific publication record from 1910 to 2020 on two topics: "climate" (CL) and "climate change/global warming/climate emergency" (CC/GW/CE). The goal is to comparatively visualize how these two distinct publication records have evolved over time, from different classification perspectives, using publication ratios as the key indicator. It is found that research output related to the Earth's contemporary changing climate overtook that of general climate research in 2010, and the publication ratio (CC/GW/CE)/(CL) has been expanding in the last decade. There are significant differences in the publication countries and sources between the two topics. Differentiation factors that affect the level of research output and engagement on the climate challenge include island versus landlocked nations, specialized versus general scientific journals, academic versus institutional organizations. The future of the publication records is discussed, such as the emergence of new terms to refer to the climate challenge, such as "climate emergency".

Monitoring Pedogenic Inorganic Carbon Accumulation Due to Weathering of Amended Silicate Minerals in Agricultural Soils.

The present study aims to demonstrate a systematic procedure for monitoring inorganic carbon induced by enhanced weathering of comminuted rocks in agricultural soils. To this end, the core soil samples taken at different depth (including 0-15 cm, 15-30 cm, and 30-60 cm profiles) are collected from an agriculture field, the topsoil of which has already been enriched with an alkaline earth metal silicate containing mineral (such as wollastonite). After transporting to the laboratory, the soil samples are air-dried and sieved. Then, the inorganic carbon content of the samples is determined by a volumetric method called calcimetry. The representative results presented herein showed five folded increments of inorganic carbon content in the soils amended with the Ca-silicate compared to control soils. This compositional change was accompanied by more than 1 unit of pH increase in the amended soils, implying high dissolution of the silicate. Mineralogical and morphological analyses, as well as elemental composition, further corroborate the increase in the inorganic carbon content of silicate-amended soils. The sampling and analysis methods presented in this study can be adopted by researchers and professionals looking to trace pedogenic inorganic carbon changes in soils and subsoils, including those amended with other suitable silicate rocks such as basalt and olivine. These methods can also be exploited as tools for verifying soil inorganic carbon sequestration by private and governmental entities to certify and award carbon credits.

Effect of nano cerium oxide on soybean (Glycine max L. Merrill) crop exposed to environmentally relevant concentrations.

This study evaluated the uptake and translocation of cerium nanoparticles (CeO2 NPs) and soluble Ce(NO3)3 by soybean plants (Glycine max L. Merrill) under the whole plant life-cycle and relevant environmental concentrations, 0.062 and 0.933 mg kg-1, which represent maximal values for 2017 in agricultural soils and sludge treated soils, respectively. The experiments were carried out using a nutrient solution. Cerium was detected in the soybean roots epidermis and cortex, leaves, and grains, but it neither impaired plant development nor grain yield. The concentration of Ce in the shoot increased as a function of time for plants treated with Ce(NO3)3, while it remained constant for plants treated with CeO2 NPs. It means that CeO2 NPs were absorbed in the same rate as biomass production, which suggests that they are taken up and transported by water mass flow. Single-particle inductively coupled plasma mass spectrometry revealed clusters of CeO2 NPs in leaves of plants treated with 25 nm CeO2 NPs (ca. 30-45 nm). The reprecipitation of soluble cerium from Ce(NO3)3 within the plant was not confirmed. Finally, bioconcentration factors above one were found for the lowest concentrated treatments. Since soybean is a widespread source of protein for animals, we draw attention to the importance of evaluating the effects of Ce entrance in the food chain and its possible biomagnification.

Optimizing Inorganic Carbon Sequestration and Crop Yield With Wollastonite Soil Amendment in a Microplot Study.

Carbon dioxide (CO2) is a major greenhouse gas, and its concentration in the atmosphere is increasing continuously, hence there is an urgent need to reduce its level in the atmosphere. Soils offer a large natural sink to store CO2. This study focuses on sequestering CO2 in the agricultural soils as inorganic carbon, which can be accomplished by adding alkaline-earth silicates. Wollastonite is used in this study as a soil amendment, to sequester CO2 via the geochemical route of mineral carbonation. The first objective of the present study was to evaluate the effect of mixing a wide range of dosages of wollastonite, as a soil amendment, on the growth performance of two leguminous plants frequently used in agricultural sector: soybean and alfalfa. The plants were grown with different wollastonite dosages (3-20 kg·m-2 for soybean and 3-40 kg·m-2 for alfalfa), for a duration of 14 weeks in a microplot experiment in Ontario, Canada. The second objective was to find evidence of enhanced weathering of wollastonite in soil, in addition to the augmentation of inorganic carbon content in soil. For this, mineralogical assessment of the soils was performed using XRD and SEM-EDS analyses. Wollastonite increased the soybean yield by two-fold in the plot amended with 10 kg·m-2. At all dosages, wollastonite increased the alfalfa growth in terms of height and above-ground biomass dry weight, as well as root biomass. The rate of CO2 sequestration, at optimum wollastonite dosage, reached 0.08 kg CO2·m-2·month-1. XRD and SEM-EDS analyses indicated accumulation of calcite in wollastonite-amended soil and formation of other weathering products. The results obtained from this study help to understand the impact of wollastonite soil amendment on agronomy, and will aid in implementing such negative emissions technology by informing farmers and industry alike that the use of wollastonite contributes toward global climate change mitigation while supporting crop yield. The findings of this study add to the existing body of knowledge on enhanced weathering as an atmospheric CO2 removal technology, providing further evidence that wollastonite weathering in agricultural soils can lead to significant capacity for CO2 sequestration as inorganic carbon, while concurrently promoting plant growth.

Micro-structured copper and nickel metal foams for wastewater disinfection: proof-of-concept and scale-up.

It is necessary to disinfect treated wastewater prior to discharge to reduce exposure risks to humans and the environment. The currently practiced wastewater disinfection technologies are challenged by toxic by-products, chemicals and energy demand, a range of effectiveness limitations, among other concerns. An effective, eco-friendly, and energy-efficient alternative disinfection technique is desirable to modernize and enhance wastewater treatment operations. Copper and nickel micro-structured metal foams, and a conventional copper mesh, were evaluated as disinfecting surfaces for treating secondary-treated wastewater contaminated with coliform bacteria. The micro-structured copper foam was adopted for scale-up study, due to its stable and satisfactory bactericidal performance obtained over a wide range of bacterial concentrations and metal-to-liquid ratios. Three scales of experiments, using two types of reactor designs, were performed using municipal wastewater to determine the optimal scale-up factors: small lab-scale batch reactor, intermediate lab-scale batch reactor, and pilot-scale continuous tubular reactor experiments. The performance was evaluated with the aim of minimizing metal material requirement with respect to bactericidal efficiency and leaching risks at all scales. Copper foam, at or above optimal conditions, consistently inactivated over 95 % of total coliforms, fecal coliforms and E.coli in wastewater at various scales, and leachate copper concentrations were determined to be below Canadian guideline values for outfall. This study successfully implemented the "structure" strategy of process intensification, and opens up the possibility to apply micro-structured copper foam in a range of other water disinfection systems, from pre-treatment to point-of-use, and should thus become a topic of further research.