ABSTRACT
Acid-responsive nonaqueous (glycerol in n-decane) Pickering emulsions were prepared using preferentially oil-wetted dynamic covalent silica (SiO2-pDB) nanoparticles as the Pickering emulsifiers. The acid-responsive Pickering emulsifier SiO2-pDB was prepared based on a Schiff base reaction between amino silica (SiO2-NH2) and p-decanoxybenzaldehyde (pDBA). The formation of SiO2-pDB was characterized by Fourier transform infrared spectroscopy, thermogravimetric analysis, and elemental analysis. The preferentially oil-wetted character of SiO2-pDB was indicated by contact angle measurement. Stable nonaqueous Pickering emulsions were prepared using preferentially oil-wetted SiO2-pDB as the Pickering emulsifier. However, after adjusting the nonaqueous Pickering emulsions to an acidic environment, complete phase separation occurred. In the acidic environment, preferentially oil-wetted SiO2-pDB decomposed into hydrophilic SiO2-NH2 and hydrophobic pDBA due to the decomposition of the dynamic imine bond in the SiO2-pDB. Then, the hydrophilic SiO2-NH2 and hydrophobic pDBA desorbed from the two-phase interface, resulting in complete phase separation of the initially stable nonaqueous Pickering emulsions. The acid-responsive nonaqueous Pickering emulsions show great potential in application in water sensitive systems, such as oil-based drilling fluids.
ABSTRACT
BACKGROUND: Clematis is the biggest genus in the family Ranunculaceae with about 300 species. Clematis is also a globally important commercial group of flowers, especially in the United States and European countries. Their petals with different colors and shapes make the genus the "Queen of the Vines". However, the genomic information and phylogeny of Clematis based on existing molecular studies are limited. In this paper, new microsatellites (SSR) markers were identified from the transcriptome data of C. finetiana obtained using the Illumina paired-end sequencing technology. RESULTS: Sequences on a total of 71,900 high-quality unigenes with the mean length of 865 bp were produced in this study. There were 6192unigenes annotated and classified into 49 functional sub-groups in three main ontology categories in GO (Gen Ontology) database,14,022 unigenes mapped to COGs (Clusters of Orthologous Groups) database and classified into 25 functional categories, and 21,494 unigenes obtained and divided into 128 pathways of KEGG (Kyoto Encyclopedia of Genes) Database. A total of 7532 SSRs were discovered from 6337 unigenes. We randomly tested 210 primer pairs, of which 52 primer pairs were able to generate specific products, and 19 possessed polymorphism in the 13 wild populations of six species from Clematis, which were used as a test material. CONCLUSIONS: The dataset of C. finetiana transcriptome and the identified new SSR markers will promote genetic research and breeding effort in Clematis.
Subject(s)
Clematis/genetics , Microsatellite Repeats , Transcriptome , Gene Ontology , Genes, Plant , Genetic Markers , Genetics, Population , High-Throughput Nucleotide Sequencing , Molecular Sequence Annotation , Phylogeny , Sequence Analysis, RNAABSTRACT
Functional materials that can quickly absorb and degrade mustard gas are essential for chemical warfare emergency response kits. In this study, a fiber membrane with excellent adsorption and catalytic degradation activity was developed by solution blow spinning polystyrene (PS)/polyurethane (PU) and hydrothermal in situ growth of a zirconium-based MOF (MOF-808). The mechanical properties of the PS/PU fibers were improved by adding a trimethylolpropane tris (2-methyl-1-aziridine propionate) (TTMA) cross-linking agent. Moreover, the CâO bonds in TTMA provided abundant growth sites for MOF-808 in the hydrothermal process, thereby greatly increasing the loading capacity. The fiber surface was completely covered with the MOF-808 particles within 24 h. The PS/PU/TTMA/MOF-808 fiber membrane was used for the catalytic degradation of 2-chloroethyl ethyl sulfide (CEES). The degradation efficiency reached 97.7% after 72 h, indicating its great application potential in emergency wiping cloths for mustard gas adsorption and degradation.
ABSTRACT
Cuphea hookeriana Walp. is an ornamental plant belonging to the Lythraceae. In this study, we reported the complete chloroplast (cp) genome sequence here and analyzed the phylogenetic relationship among Lythraceae plants. The length of the cp genome was 158,999 bp, including a large single-copy (LSC, 89,311 bp) region and a small single-copy (SSC, 18,436 bp) region separated by a pair of inverted repeats (IRs, 25,626 bp). There were 72 unique protein-coding genes (PCGs), 30 transfer RNA (tRNA) genes, and four ribosomal RNA (rRNA) genes in the cp genome of C. hookeriana. A total of 223 simple sequence repeats (SSRs) and 34 long repeat sequences were identified. Phylogenetic analyses using maximum-likelihood (ML) revealed that C. hookeriana was close to C. hyssopifolia. In addition, the two Cuphea species were the sister group of Woodfordia fruticosa.
ABSTRACT
HYPOTHESIS: Particulate matter (PM) pollution and the coronavirus (COVID-19) pandemic have increased demand for protective masks. However, typical protective masks only intercept particles and produce peculiar odors if worn for extended periods owing to bacterial growth. Therefore, new protective materials with good filtration and antibacterial capabilities are required. EXPERIMENTS: In this study, we prepared multi-scale polyvinylidene fluoride (PVDF) nanofibrous membranes for efficient filtration and durable antibacterial properties via N-halamine modification. FINDINGS: The N-halamine-modified nanofibrous membrane (PVDF-PAA-TMP-Cl) had sufficient active chlorine content (800 ppm), and the tensile stress and strain were improved compared with the original membrane, from 6.282 to 9.435 MPa and from 51.3 % to 56.4 %, respectively. To further improve the interception efficiency, ultrafine nanofibers (20-35 nm) were spun on PVDF-PAA-TMP-Cl nanofibrous membranes, and multi-scale PVDF-PAA-TMP-Cl nanofibrous membranes were prepared. These membranes exhibited good PM0.3 interception (99.93 %), low air resistance (79 Pa), promising long-term PM2.5 purification ability, and high bactericidal efficiency (>98 %). After ten chlorination cycles, the antibacterial efficiency against Escherichia coli and Staphylococcus aureus exceeded 90 %; hence, the material demonstrated highly efficient filtration and repeatable antibacterial properties. The results of this study have implications for the development of air and water filtration systems and multi-functional protective materials.
Subject(s)
COVID-19 , Nanofibers , Humans , Chlorine , Anti-Bacterial Agents/pharmacology , Escherichia coli , Water , Particulate MatterABSTRACT
The usage of single-use face masks (SFMs) has increased since the outbreak of the coronavirus pandemic. However, non-degradability and mismanagement of SFMs have raised serious environmental concerns. Moreover, both melt-blown and nanofiber-based mask filters inevitably suffer from poor filtration performance, like a continuous decrease in the removal efficiency for particulate matter (PM) and weak breathability. Herein, we report a new method to create biodegradable and reusable fibrous mask filters. The filter consists of a true nanoscale bio-based poly(lactic acid) (PLA) fiber (an average size of 37 ± 4 nm) that is fabricated via electrospinning of an extremely dilute solution. Furthermore, we designed a multiscale structure with integrated features, such as low basis weight (0.91 g m-2), small pore size (0.73 µm), and high porosity (91.72%), formed by electrospinning deposition of true nanoscale fibers on large pore of 3D scaffold nanofiber membranes. The resultant mask filter exhibited a high filtration efficiency (PM0.3-99.996%) and low pressure drop (104 Pa) superior to the commercial N95 filter. Importantly, this filter has a durable filtering efficiency for PM and natural biodegradability based on PLA. Therefore, this study offers an innovative strategy for the preparation of PLA nanofibers and provides a new design for high-performance nanofiber filters.
Subject(s)
Nanofibers , Filtration , Particulate Matter , PolyestersABSTRACT
Indoor air quality (IAQ) has assumed new significance given the extensive amount of time spent indoor due to the coronavirus pandemic and particulate matter (PM) pollution. Accordingly, the development of window air filters to effectively intercept PM from outdoor air under natural ventilation conditions is an important research topic. However, most existing filters inevitably suffer from the compromise among filtration capability, transparency, and air permeability. In this study, we fabricate a high-performance transparent air filter to improve IAQ via natural ventilation. polyvinylidene fluoride (PVDF) superfine nanofibers of size 20-35 nm are prepared using extremely dilute solution electrospinning; a multi-scale nanofiber structure is then designed. By adjusting the ratio of PVDF superfine nanofibers (SNs) to PVDF coarse fibers (CNs), we balance the structure-performance relationship. Benefiting from the multiscale structural features that include a small pore size (0.72 µm) and high porosity (92.22%), the resulting filters exhibit excellent performance including high interception efficiency (99.92%) for PM0.3, low air resistance (69 Pa), high transparency (â¼80%) and stable filtration after 100 h of UV irradiation. This work describes a new strategy for the fabrication of nanofibers with true-nanoscale diameters and the design of high-performance air filters.
Subject(s)
Air Filters , Nanofibers , Particulate Matter , PolyvinylsABSTRACT
Developing solid-free nanoemulsions with pH responsiveness is desirable in enhanced oil recovery (EOR) applications. Here, we report the synthesis of an interfacial activity controllable surfactant (T-DBA) through dynamic imine bonding between taurine (T) and p-decyloxybenzaldehyde (DBA). Instead of macroemulsions, nanoemulsions can be prepared by using T-DBA as an emulsifier. The dynamic imine bond of T-DBA enables switching between the active and inactive states in response to pH. This switching of interfacial activity was used to gate the stability of nanoemulsions, thus enabling us to turn the nanoemulsions off and on. Using such dynamic imine bonds to govern nanoemulsion stability could enable intelligent control of many processes such as heavy oil recovery and interfacial reactions.
ABSTRACT
Highly sensitive wearable textile pressure sensors represent the key components of smart textiles and personalized electronics, with potential applications in biomedical monitoring, electronic skin, and human-machine interfacing. Here, we present a simple and low-cost strategy to fabricate highly sensitive wearable textile pressure sensors for non-invasive human motion and physiological signal monitoring and the detection of dynamic tactile stimuli. The wearable textile sensor was woven using a one-dimensional (1D) weavable core-sheath nanofiber yarn, which was obtained by coating a Ni-coated cotton yarn electrode with carbon nanotube (CNT)-embedded polyurethane (PU) nanofibers using a simple electrospinning technique. In our design, the three-dimensional elastic porous nanofiber structure of the force-sensing layer and hierarchical fiber-bundled structure of the conductive Ni-coated electrode provide the sensor with a relatively large surface area, and a sufficient surface roughness and elasticity. This leads to rapid and sharp increases in the contact area under stimuli with low external pressure. As a result, the textile pressure sensor exhibits the advantages of a high sensitivity (16.52 N-1), wide sensing range (0.003-5 N), and short response time (~0.03 s). Owing to these merits, our textile-based sensor can be directly attached to the skin as usual and conformally fit the shape deformations of the body's complex flexible curved surfaces. This contributes to the reliable real-time monitoring of human movements, ranging from subtle physiological signals to vigorous movements. Moreover, a large-area textile sensing matrix is successfully fabricated for tactile mapping of spatial pressure by being worn on the surface of wrist, highlighting the tremendous potential for applications in smart textiles and wearable electronics.
Subject(s)
Biosensing Techniques , Movement , Nanofibers/chemistry , Nanotubes, Carbon/chemistry , Polyurethanes/chemistry , Textiles , Wearable Electronic Devices , Electric Conductivity , Humans , Porosity , PressureABSTRACT
Waterproof-breathable (WB) materials with outstanding waterproofness, breathability, and mechanical performance are critical in diverse consumer applications. Electrospun nanofibrous membranes with thin fiber diameters, small pore sizes, and high porosity have attracted significant attention in the WB fabric field. Hot-press treatment technology can induce the formation of inter-fiber fusion structures and hence improve the waterproofness and mechanical performance. By combining electrospinning and hot-press treatment technology, polyurethane/fluorinated polyurethane/thermoplastic polyurethane/alkylsilane-functionalized graphene (PU/FPU/TPU/FG) nanofiber WB fabric was fabricated. Subsequently, the morphologies, porous structure, hydrostatic pressure, water vapor transmission rate (WVTR), and stress-strain behavior of the nanofiber WB fabric were systematically investigated. The introduction of the hydrophobic FG sheet structure and the formation of the inter-fiber fusion structure greatly improved not only the waterproofness but also the mechanical performance of the nanofiber WB fabric. The optimized PU/FPU/TPU-50/FG-1.5 WB fabric exhibited an excellent comprehensive performance: a high hydrostatic pressure of 80.4 kPa, a modest WVTR of 7.6 kg m-2 d-1, and a robust tensile stress of 127.59 MPa, which could be used to achieve various applications. This work not only highlights the preparation of materials, but also provides a high-performance nanofiber WB fabric with huge potential application prospects in various fields.
ABSTRACT
Objectives: Colistin has been identified in a Caenorhabditis elegans chemical screening as an immunostimulatory agent that activates the conserved p38/PMK-1 pathway and provides protection against pathogens. Here we aimed to extend those findings to a mammalian model and evaluate the immunomodulatory effects of colistin on rat macrophages. Methods: Macrophages were isolated from Sprague-Dawley (SD) rat. The effects of colistin on the cytokine secretion, phagocytic activity and protein expression were determined by enzyme-linked immunosorbent assay (ELISA), flow cytometry, and Western blotting analysis, respectively. The relative microRNA expression was determined by microarray, and Kyoto Encylopedia of Genes and Genomes (KEGG) was used to identify potential signaling pathways. Results: Our data showed that 5, 10, and 20 µg/ml colistin significantly increased the secretion of TNF-α, while 20 and 5 µg/ml colistin significantly increased the levels of IL-1ß and IL-6, respectively. Flow cytometry results showed that the relative mean fluorescence intensity and percentage of phagocytosis in colistin treatment groups were significantly higher compared with the control group, while the increased phagocytosis phenomenon can be blocked by p38 inhibitor. The phagocytic ability of macrophages against Staphylococcus aureus was significantly increased after colistin treatment. Microarray and KEGG pathway analyses revealed that mitogen-activated protein kinase (MAPK), mammalian target of rapamycin (mTOR), chemokine, and B cell receptor were the main pathways involved in the colistin stimulation process. Western blotting analysis demonstrated that the phosphorylated p38 protein level of colistin treatment groups was increased in a dose dependent manner. Conclusions: Present study is the first to demonstrate that colistin had immunomodulatory effects on macrophages in mammals, and the p38/MAPK pathway was involved in such colistin-induced immunomodulatory effect.
ABSTRACT
Pollution by atmospheric particulate matter (PM) is a serious threat to human health, and traditional window screens are unable to intercept fine particles. Therefore, it is urgent to develop anti-haze window screens to effectively protect the public. We prepared a polyurethane/silicon nitride (PU/Si3N4) electret nanofiber membrane with a minimum diameter (350â¯nm) and narrower diameter distribution than those of PU-Boehmite, PU-SiO2, and PU-TiO2 membranes by electrospinning. The PU-Si3N4 fiber membrane has good mechanical properties with stress of 18.05â¯MPa and strain of 170%. Moreover, PU/Si3N4 exhibits a maximum current peak (2.63â¯pA) at 90⯰C. Importantly, PU/Si3N4 membranes applied to window screens still maintain high filtration efficiency (79.36%) and low resistance (25â¯Pa) to air flow at a low areal density of 1.22â¯g/m2. Furthermore, they show good light transmittance (40%) and air permeability (46.42â¯mmâ¯s-1). Therefore, PU/Si3N4 electret nanofiber window screens have broad application prospects.
ABSTRACT
One-dimensional, flexible yarn-shaped supercapacitors for woven cloth have the potential for use in different kinds of wearable devices. Nevertheless, the challenge that supercapacitors face is low energy density. In this paper, we present a low-cost and large-scale manufacturing method to construct a supercapacitor yarn with high power and high energy density. To construct the novel and flexible poly(3,4-ethylenedioxythiophene): poly(styrenesulfonate)â»polyacrylonitrile (PDEOT: PSS-PAN)/Ni cotton (PNF/NiC) capacitor yarn, an electrospinning technique was initially used to wrap the polyacrylonitrile (PAN) nanofibers around the core Ni-coated yarn. The PEDOT: PSSâ»PAN nanofiber composite electrode was created using in situ deposition and H3PO4/PVA was used as a gel electrolyte. This electrode material has a yarn/nanofiber/PEDOT: PSS nanoparticle hierarchical structure, providing a high specific area and enhanced pseudocapacitance. The electrode demonstrated a high volumetric capacitance of 26.88 F·cm-3 (at 0.08 A·cm-3), an energy density of 9.56 mWh·cm-3, and a power density of 830 mW·cm-3. In addition, the PNF/NiC capacitor yarns are lightweight, highly flexible, resistant to bending fatigue, can be connected in series or parallel, and may be suitable for a variety of wearable electronic products.
ABSTRACT
In bone tissue engineering, the fabrication of a scaffold with a hierarchical architecture, excellent mechanical properties, and good biocompatibility remains a challenge. Here, a solution of polylactic acid (PLA) and Tussah silk fibroin (TSF) was electrospun into nanofiber yarns and woven into multilayer fabrics. Then, composite scaffolds were obtained by mineralization in simulated body fluid (SBF) using the multilayer fabrics as a template. The structure and related properties of the composite scaffolds were characterized using different techniques. PLA/TSF (mass ratio, 9:1) nanofiber yarns with uniform diameters of 72±9µm were obtained by conjugated electrospinning; the presence of 10wt% TSF accelerated the nucleation and growth of hydroxyapatite on the surface of the composite scaffolds in SBF. Furthermore, the compressive mechanical properties of the PLA/TSF multilayer nanofiber fabrics were improved after mineralization; the compressive modulus and stress of the mineralized composite scaffolds were 32.8 and 3.0 times higher than that of the composite scaffolds without mineralization, respectively. Interestingly, these values were higher than those of scaffolds containing random nanofibers. Biological assay results showed that the mineralization and multilayer fabric structure of the composite nanofiber scaffolds significantly increased cell adhesion and proliferation and enhanced the mesenchymal stem cell differentiation toward osteoblasts. Our results indicated that the mineralized nanofiber scaffolds with multilayer fabrics possessed excellent cytocompatibility and good osteogenic activity, making them versatile biocompatible scaffolds for bone tissue engineering.
Subject(s)
Fibroins/chemistry , Lactic Acid/chemistry , Nanofibers/chemistry , Polyglycolic Acid/chemistry , Tissue Engineering , Alkaline Phosphatase/metabolism , Biocompatible Materials/chemistry , Biocompatible Materials/pharmacology , Cell Adhesion/drug effects , Cell Differentiation/drug effects , Cell Proliferation/drug effects , Cells, Cultured , Collagen Type I/metabolism , Compressive Strength , Durapatite/chemistry , Humans , Hydrophobic and Hydrophilic Interactions , Mesenchymal Stem Cells/cytology , Mesenchymal Stem Cells/drug effects , Mesenchymal Stem Cells/metabolism , Microscopy, Confocal , Osteocalcin/metabolism , Polylactic Acid-Polyglycolic Acid Copolymer , Spectroscopy, Fourier Transform Infrared , Tissue Scaffolds/chemistryABSTRACT
Bone scaffolds with interconnected pores, good mechanical properties, excellent biocompatibility, and osteoinductivity are challenging to fabricate. In this study, we fabricated and characterized the morphology, hydrophilicity, protein adsorptivity, mechanical properties, and fibrous structure of nanofiber scaffolds with multiple, orthogonal layers of composite materials based on poly(l-lactic-co-glycolic acid) (PLGA), graphene oxide (GO), tussah silk fibroin (TSF), and hydroxyapatite (HA). The data show that incorporation of 1 wt % GO into PLGA/TSF nanofibers significantly decreased the fiber diameter from 321 to 89 nm. On the other hand, incorporation of 10 wt % TSF accelerated the nucleation and growth of HA on composite PLGA/GO scaffolds exposed to simulated body fluid. Furthermore, the compressive modulus and stress of composite scaffolds with GO were 1.7-fold and 0.6-fold higher than those of similar scaffolds without GO. Interestingly, composite scaffolds with multiple orthogonal layers exhibited higher compressive modulus and stress compared to scaffolds with randomly oriented nanofibers. Biological assays indicated that mineralized scaffolds with multiple orthogonal layers significantly enhanced cell adhesion, proliferation, and differentiation of mesenchymal stem cells into osteoblasts. In summary, the data indicate that these scaffolds have excellent cytocompatibility and osteoinductivity and have potential as versatile substrates for bone tissue engineering.
ABSTRACT
To better mimic natural bone, a graphene oxide-hydroxyapatite/silk fibroin (cGO-HA/SF) scaffold was fabricated by biomineralizing carboxylated GO sheets, blending with SF, and freeze-drying. The material has increasing porosity and decreasing density from outside to inside. Analysis of GO mineralization in simulated body fluid indicated that carboxylation and Chitosan may synergistically regulate HA growth along the c-axis of weakly crystalline, rod-like GO-HA particles. Compared with HA/SF gradient composites, a cGO-HA gradient scaffold with cGO:HA mass ratio 1:4 has 5-fold and 2.5-fold higher compressive strength and compressive modulus, respectively. Additionally, the cGO-HA/SF composite stimulated mouse mesenchymal stem cell adhesion and proliferation, alkaline phosphatase secretion, and mineral deposition more strongly than HA/SF and pure HA scaffolds. Hence, the material may prove to be an excellent and versatile scaffold for bone tissue engineering.
Subject(s)
Tissue Engineering , Animals , Biomimetics , Bone and Bones , Cell Proliferation , Durapatite , Fibroins , Graphite , Mice , Oxides , Tissue ScaffoldsABSTRACT
The wearable electronic skin with high sensitivity and self-power has shown increasing prospects for applications such as human health monitoring, robotic skin, and intelligent electronic products. In this work, we introduced and demonstrated a design of highly sensitive, self-powered, and wearable electronic skin based on a pressure-sensitive nanofiber woven fabric sensor fabricated by weaving PVDF electrospun yarns of nanofibers coated with PEDOT. Particularly, the nanofiber woven fabric sensor with multi-leveled hierarchical structure, which significantly induced the change in contact area under ultra-low load, showed combined superiority of high sensitivity (18.376 kPa-1, at ~100 Pa), wide pressure range (0.002-10 kPa), fast response time (15 ms) and better durability (7500 cycles). More importantly, an open-circuit voltage signal of the PPNWF pressure sensor was obtained through applying periodic pressure of 10 kPa, and the output open-circuit voltage exhibited a distinct switching behavior to the applied pressure, indicating the wearable nanofiber woven fabric sensor could be self-powered under an applied pressure. Furthermore, we demonstrated the potential application of this wearable nanofiber woven fabric sensor in electronic skin for health monitoring, human motion detection, and muscle tremor detection.
Subject(s)
Nanofibers/chemistry , Pressure , Wearable Electronic Devices , Bridged Bicyclo Compounds, Heterocyclic/chemistry , Nanofibers/ultrastructure , Polymers/chemistry , Polyvinyls/chemistryABSTRACT
The development of flexible and stretchable electronic skins that can mimic the complex characteristics of natural skin is of great value for applications in human motion detection, healthcare, speech recognition, and robotics. In this work, we propose an efficient and low-cost fabrication strategy to construct a highly sensitive and stretchable electronic skin that enables the detection of dynamic and static pressure, strain, and flexion based on an elastic graphene oxide (GO)-doped polyurethane (PU) nanofiber membrane with an ultrathin conductive poly(3,4-ethylenedioxythiophene) (PEDOT) coating layer. The three-dimensional porous elastic GO-doped PU@PEDOT composite nanofibrous substrate and the continuous self-assembled conductive pathway in the nanofiber-based electronic skin offer more contact sites, a larger deformation space, and a reversible capacity for pressure and strain sensing, which provide multimodal mechanical sensing capabilities with high sensitivity and a wide sensing range. The nanofiber-based electronic skin sensor demonstrates a high pressure sensitivity (up to 20.6 kPa-1), a broad sensing range (1 Pa to 20 kPa), excellent cycling stability and repeatability (over 10,000 cycles), and a high strain sensitivity over a wide range (up to approximately 550%). We confirmed the applicability of the nanofiber-based electronic skin to pulse monitoring, expression, voice recognition, and the full range of human motion, demonstrating its potential use in wearable human-health monitoring systems.
Subject(s)
Nanofibers , Graphite , Humans , Polyurethanes , Pressure , Wearable Electronic DevicesABSTRACT
To engineer bone tissue, a scaffold with good biological properties should be provided to approximate the hierarchical structure of collagen fibrils in natural bone. In this study, we fabricated a novel scaffold consisting of multilayer nanofiber fabrics (MLNFFs) by weaving nanofiber yarns of polylactic acid (PLA) and Tussah silk fibroin (TSF). The yarns were fabricated by electrospinning, and we found that spinnability, as well as the mechanical properties of the resulting scaffold, was determined by the ratio between polylactic acid and Tussah silk fibroin. In particular, a 9:1 mixture can be spun continuously into nanofiber yarns with narrow diameter distribution and good mechanical properties. Accordingly, woven scaffolds based on this mixture had excellent mechanical properties, with Young's modulus 417.65MPa and tensile strength 180.36MPa. For nonwoven scaffolds fabricated from the same materials, the Young's modulus and tensile strength were 2- and 4-fold lower, respectively. Woven scaffolds also supported adhesion and proliferation of mouse mesenchymal stem cells, and promoted biomineralization via alkaline phosphatase and mineral deposition. Finally, the scaffolds significantly enhanced the formation of new bone in damaged femoral condyle in rabbits. Thus, the scaffolds are potentially suitable for bone tissue engineering because of biomimetic architecture, excellent mechanical properties, and good biocompatibility.
Subject(s)
Bone Substitutes , Calcification, Physiologic/drug effects , Femur , Fibroins/chemistry , Nanofibers/chemistry , Polyesters/chemistry , Tissue Engineering , Tissue Scaffolds/chemistry , Animals , Bone Substitutes/chemistry , Bone Substitutes/pharmacology , Cells, Cultured , Elastic Modulus , Femur/injuries , Femur/metabolism , Femur/pathology , Mesenchymal Stem Cells/cytology , Mesenchymal Stem Cells/metabolism , Mice , RabbitsABSTRACT
To engineer bone tissue, it is necessary to provide a biocompatible, mechanically robust scaffold. In this study, we fabricated an ultrafine nanofiber scaffold by electrospinning a blend of poly(L-lactic-co-glycolic acid), tussah silk fibroin, and graphene oxide (GO) and characterized its morphology, biocompatibility, mechanical properties, and biological activity. The data indicate that incorporation of 10 wt.% tussah silk and 1 wt.% graphene oxide into poly(L-lactic-co-glycolic acid) nanofibers significantly decreased the fiber diameter from 280 to 130 nm. Furthermore, tussah silk and graphene oxide boosted the Young's modulus and tensile strength by nearly 4-fold and 3-fold, respectively, and significantly enhanced adhesion, proliferation in mouse mesenchymal stem cells and functionally promoted biomineralization-relevant alkaline phosphatase (ALP) and mineral deposition. The results indicate that composite nanofibers could be excellent and versatile scaffolds for bone tissue engineering.