Correction: Intrinsic defect formation and the effect of transition metal doping on transport properties in a ductile thermoelectric material α-Ag2S: a first-principles study.

Correction for 'Intrinsic defect formation and the effect of transition metal doping on transport properties in a ductile thermoelectric material α-Ag2S: a first-principles study' by Ho Ngoc Nam et al., Phys. Chem. Chem. Phys., 2021, DOI: .

Intrinsic defect formation and the effect of transition metal doping on transport properties in a ductile thermoelectric material α-Ag2S: a first-principles study.

In this paper, the electronic structure and transport properties of a ductile thermoelectric material α-Ag2S are examined using first-principles calculations combined with the Boltzmann transport equation within a constant relaxation-time approximation. The use of the exchange-correlation functional SCAN + rVV10 successfully describes the geometric and electronic structure of α-Ag2S with a direct bandgap value of 0.99 eV, which is consistent with the previous experimental observations. Based on the calculations of the formation energy of typical intrinsic defects, it is found that intrinsic defect formation greatly affects the conductivity of the system where silver vacancy and interstitial silver act as p-type and n-type defects, respectively. Large Seebeck coefficients at room-temperature, of around -760 µV K-1 for n-type and 1400 µV K-1 for p-type, are realized. It is also suggested that the doping of fully filled d-block elements such as Cu and Au not only maintained the Seebeck coefficients at high values but also improved electrical conductivity by more than 1.4 times, leading to the improvement of the power factor by up to 40% compared to the non-doped sample at low carrier concentration.

Colossal Magnetoresistive Switching Induced by d0 Ferromagnetism of MgO in a Semiconductor Nanochannel Device with Ferromagnetic Fe/MgO Electrodes.

Exploring potential spintronic functionalities in resistive switching (RS) devices is of great interest for creating new applications, such as multifunctional resistive random-access memory and novel neuromorphic computing devices. In particular, the importance of the spin-triplet state of cation vacancies in oxide materials, which is induced by localized and strong O-2p on-site Coulomb interactions, in RS devices has been overlooked. d0 ferromagnetism sometimes appears due to the spin-triplet state and ferromagnetic Zener's double exchange interactions between cation vacancies, which are occasionally strong enough to make nonmagnetic oxides ferromagnetic. Here, for the first time, anomalous and colossal magneto-RS (CMRS) with very high magnetic field dependence is demonstrated by utilizing an unconventional RS device composed of a Ge nanochannel with all-epitaxial single-crystalline Fe/MgO electrodes. The device shows colossal and unusual behavior as the threshold voltage and ON/OFF ratio strongly depend on a magnetic field, which is controllable with an applied voltage. This new phenomenon is attributed to the formation of d0-ferromagnetic filaments by attractive Mg vacancies due to the spin-triplet states with ferromagnetic double exchange interactions and the ferromagnetic proximity effect of Fe on MgO. The findings will allow the development of energy-efficient CMRS devices with multifield susceptibility.

Insight into Scattering Mechanisms and Transport Properties of AgCuS for Flexible Thermoelectric Applications.

The development of flexible thermoelectric devices requires materials possessing ductility and high thermoelectric performance at room temperature. However, only a few existing materials meet both criteria. In this study, the ductile properties, electronic structure, and transport properties of the low-temperature phase α-AgCuS were elucidated using first-principles calculations combined with Boltzmann transport theory. With a layered zigzag structure similar to the well-known ductile semiconductor Ag2S, AgCuS is determined to have good metal-like ductility. Through consideration of various intrinsic scattering mechanisms, we found that electron-polar optical phonon interactions have the most significant impact on the transport behavior of AgCuS. The predominance of this type of interaction is also disclosed by the covalent-ionic bonding nature of the Ag-S and Cu-S bonds. Therefore, weakening this interaction via doping or alloying could optimize the thermoelectric performance of the system. At room temperature, a maximum dimensionless figure of merit ZT of up to 0.592 could be achieved under a tuning of hole concentration to 2 × 1019 cm-3, suggesting that α-AgCuS could be a promising p-type candidate for flexible thermoelectric applications.

Unveiling a Chemisorbed Crystallographically Heterogeneous Graphene/L10-FePd Interface with a Robust and Perpendicular Orbital Moment.

A crystallographically heterogeneous interface was fabricated by growing hexagonal graphene (Gr) using chemical vapor deposition (CVD) on a tetragonal FePd epitaxial film grown by magnetron sputtering. FePd was alternately arranged with Fe and Pd in the vertical direction, and the outermost surface atom was identified primarily as Fe rather than Pd. This means that FePd has a high degree of L10-ordering, and the outermost Fe bonds to the carbon of Gr at the interface. When Gr is grown by CVD, the crystal orientation of hexagonal Gr toward tetragonal L10-FePd selects an energetically stable structure based on the van der Waals (vdW) force. The atomic relationship of Gr/L10-FePd, which is an energetically stable interface, was unveiled theoretically and experimentally. The Gr armchair axis was parallel to FePd [100]L10, where Gr was under a small strain by chemical bonding. Focusing on the interatomic distance between the Gr and FePd layers, the distance was theoretically and experimentally determined to be approximately 0.2 nm. This shorter distance (≈0.2 nm) can be explained by the chemisorption-type vdW force of strong orbital hybridization, rather than the longer distance (≈0.38 nm) of the physisorption-type vdW force. Notably, depth-resolved X-ray magnetic circular dichroism analyses revealed that the orbital magnetic moment (Ml) of Fe in FePd emerged at the Gr/FePd interface (@inner FePd: Ml = 0.16 µB → @Gr/FePd interface: Ml = 0.32 µB). This interfacially enhanced Ml showed obvious anisotropy in the perpendicular direction, which contributed to interfacial perpendicular magnetic anisotropy (IPMA). Moreover, the interfacially enhanced Ml and interfacially enhanced electron density exhibited robustness. It is considered that the shortening of the interatomic distance produces a robust high electron density at the interface, resulting in a chemisorption-type vdW force and orbital hybridization. Eventually, the robust interfacial anisotropic Ml emerged at the crystallographically heterogeneous Gr/L10-FePd interface. From a practical viewpoint, IPMA is useful because it can be incorporated into the large bulk perpendicular magnetic anisotropy (PMA) of L10-FePd. A micromagnetic simulation assuming both PMA and IPMA predicted that perpendicularly magnetized magnetic tunnel junctions (p-MTJs) using Gr/L10-FePd could realize 10-year data retention in a small recording layer with a circular diameter and thickness of 10 and 2 nm, respectively. We unveiled the energetically stable atomic structure in the crystallographically heterogeneous interface, discovered the emergence of the robust IPMA, and predicted that the Gr/L10-FePd p-MTJ is significant for high-density X nm generation magnetic random-access memory (MRAM) applications.

Ferromagnetism and giant magnetoresistance in zinc-blende FeAs monolayers embedded in semiconductor structures.

Material structures containing tetrahedral FeAs bonds, depending on their density and geometrical distribution, can host several competing quantum ground states ranging from superconductivity to ferromagnetism. Here we examine structures of quasi two-dimensional (2D) layers of tetrahedral Fe-As bonds embedded with a regular interval in a semiconductor InAs matrix, which resembles the crystal structure of Fe-based superconductors. Contrary to the case of Fe-based pnictides, these FeAs/InAs superlattices (SLs) exhibit ferromagnetism, whose Curie temperature (TC) increases rapidly with decreasing the InAs interval thickness tInAs (TC ∝ tInAs-3), and an extremely large magnetoresistance up to 500% that is tunable by a gate voltage. Our first principles calculations reveal the important role of disordered positions of Fe atoms in the establishment of ferromagnetism in these quasi-2D FeAs-based SLs. These unique features mark the FeAs/InAs SLs as promising structures for spintronic applications.

Hole-mediated ferromagnetism in a high-magnetic moment material, Gd-doped GaN.

As an exotic material in spintronics, Gd-doped GaN is known as a room- temperature ferromagnetic material that possesses a large magnetic moment (4000 µBper Gd ion). This paper theoretically proposes that the large magnetic moment and room-temperature ferromagnetism observed in Gd-doped GaN is caused by N 2p holes based on the assumption that Ga-vacancies (VGa) result from the introduction of Gd ions via the volume compensation effect. This causes that the too large magnetic moment is estimated for Gd ions if only Gd ions contributed the magnetic moment.