A poly(arylene ethynylene)-based microfluidic fluorescence sensor array for discrimination of polycyclic aromatic hydrocarbons.

Polycyclic aromatic hydrocarbons (PAHs) are persistent contaminants in the environment. Several of them have carcinogenic properties. There is considerable interest in their sensitive low-cost detection and monitoring. We present a simple paper-based microfluidic sensor for the rapid detection of PAHs. Craft punch patterning generated multiple detection zones inhabited by fluorescent poly(arylene ethynylene)s (PAEs). Changes in fluorescence image and/or intensity of the sensor array were recorded using a smartphone camera. The RGB color values of the photographed images were extracted through ImageJ software. 10 different PAHs were correctly identified using Principal Component Analysis and discrimination analysis (PCA-DA). 100% classification accuracy was achieved for model training, whereas validating the PCA-DA model by cross-validation resulted in 93% classification accuracy for 5.0 mg L-1 analyte.

Supramolecular Assembly of Conjugated Polymers under Vibrational Strong Coupling.

Strong coupling plays a significant role in influencing chemical reactions and tuning material properties by modifying the energy landscapes of the systems. Here we study the effect of vibrational strong coupling (VSC) on supramolecular organization. For this purpose, a rigid-rod conjugated polymer known to form gels was strongly coupled together with its solvent in a microfluidic IR Fabry-Perot cavity. Absorption and fluorescence studies indicate a large modification of the self-assembly under such cooperative VSC. Electron microscopy confirms that in this case, the supramolecular morphology is totally different from that observed in the absence of strong coupling. In addition, the self-assembly kinetics are altered and depend on the solvent vibration under VSC. The results are compared to kinetic isotope effects on the self-assembly to help clarify the role of different parameters under strong coupling. These findings indicate that VSC is a valuable new tool for controlling supramolecular assemblies with broad implications for the molecular and material sciences.

Dipole-Switchable Poly(para-phenyleneethynylene)s: Ferroelectric Conjugated Polymers.

Dipolar 2,3-difluorobenzene units are introduced into the backbone of a poly(para-phenyleneethynylene) (PPE) to generate a ferroelectric conjugated polymer. The structural features of the partially fluorinated PPE allow for the generation of a remanent polarization in the solid state; the difluorinated benzene rings behave as molecular rotors at high temperature, while at room temperature, stacking of such rings clamps down the ring orientation. The molecular dipoles can still be oriented by moderate external electrical fields at room temperature, and this PPE is then ferroelectric. The concept should be transferable to other poly(aryleneethynylene)s, and novel conjugated ferroelectric conjugated polymers will be accessible using this concept.

Porous polymers based on aryleneethynylene building blocks.

Porous conjugated polymers are synthesized by metal-catalyzed coupling reactions. The progress for porous polymers when planar or tetrahedral building blocks are connected by alkyne units into novel materials is highlighted. The most prominent reaction for the buildup of the microporous alkyne-bridged polymers is the Sonogashira reaction, connecting alkynes to aromatic iodides or bromides. The availability of the building blocks and the potency of the Sonogashira reaction allow preparing a large variety of intrinsically porous polymeric materials, in which rigid struts connect multipronged centers. The microporous polymers are used as catalysts and as storage materials for gases and sensors. Postfunctionalization schemes, understanding of structure-property relationships, and the quest for high porosity are pertinent.

Paper and nylon based optical tongues with poly(p-phenyleneethynylene)-fluorophores efficiently discriminate nitroarene-based explosives and pollutants.

Discrimination of nitroarenes with hydrophobic dyes in a polar (H2O) environment is difficult but possible via a lab-on-chip, with polymeric dyes immobilized on paper or nylon membranes. Here arrays of 12 hydrophobic poly(p-phenyleneethynylene)s (PPEs), are assembled into a chemical tongue to detect/discriminate nitroarenes in water. The changes in fluorescence image of the PPEs when interacting with solutions of the nitroarenes were recorded and converted into color difference maps, followed by cluster analysis methods. The variable selection method for both paper and nylon devices selects a handful of PPEs at different pH-values that discriminate nitroaromatics reliably. The paper-based chemical tongue could accurately discriminate all studied nitroarenes whereas the nylon-based devices represented distinguishable optical signature for picric acid and 2,4,6-trinitrotoluene (TNT) with high accuracy.

Fast Response Organic Supramolecular Transistors Utilizing In-Situ π-Ion Gels.

Despite their remarkable charge carrier mobility when forming well-ordered fibers, supramolecular transistors often suffer from poor processability that hinders device integration, resulting in disappointing transconductance and output currents. Here, a new class of supramolecular transistors, π-ion gel transistors (PIGTs), is presented. An in situ π-ion gel, which is an unprecedented composite of semiconducting nanofibers and an enclosed ionic liquid, is directly employed as an active material and internal capacitor. In comparison to other supramolecular transistors, a PIGT displays a high transconductance (133 µS) and output current (139 µA at -6 V), while retaining a high charge-carrier mobility (4.2 × 10-2 cm2 V-1 s-1 ) and on/off ratio (3.7 × 104 ). Importantly, the unique device configuration and the high ionic conductivity associated with the distinct nanosegregation enables the fastest response among accumulation-mode electrochemical-based transistors (<20 µs). Considering the advantages of the absence of dielectric layers and the facile fabrication process, PIGT has great potential to be utilized in printed flexible devices. The device platform is widely applicable to various supramolecular assemblies, shedding light on the interdisciplinary research of supramolecular chemistry and organic electronics.

Light-Emitting Electrochemical Cells Based on Conjugated Ion Gels.

π-conjugated gels are potentially useful for organic electronic applications. We present a π-conjugated ion gel, composed of substituted poly(para-phenyleneethynylene) (PPE) and an ionic liquid. This combination is well suited as an active material in a light-emitting electrochemical cells (LECs). The nanosegregated structure of the gels achieves a large interface between the polymer and ionic liquid (IL) and allows-by nature of its structure-facile ion conduction and continuous electrical conduction paths. Efficient doping significantly improves the response time. This concept should be applicable to other π-conjugated gels, and it allows the construction of gel-LECs.

Printing Poly( p-phenyleneethynylene) PLEDs.

Gravure printing of functional thin-film layers of side-chain-substituted poly( para-phenyleneethynylene)s (PPEs) is reported. Rheological properties of PPEs in combination with the Hansen solubility model allowed the formulation of enhanced single-component inks. Layer evaluation is performed with reflectometric thin-film recordings in an optical setup for laterally resolved large-area investigation using imaging color reflectometry. An organic light-emitting diode in a simple glass/indium tin oxide/poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate)/PPE/LiF-Al stack was gravure-printed from the improved ink showing excellent luminance (542 cd m-2, U = 11.5 V) for this polymer class.

Truxene-Based Hyperbranched Conjugated Polymers: Fluorescent Micelles Detect Explosives in Water.

We report two hyperbranched conjugated polymers (HCP) with truxene units as core and 1,4-didodecyl-2,5-diethynylbenzene as well as 1,4-bis(dodecyloxy)-2,5-diethynylbenzene as comonomers. Two analogous poly(para-phenyleneethynylene)s (PPE) are also prepared as comparison to demonstrate the difference between the truxene and the phenyl moieties in their optical properties and their sensing performance. The four polymers are tested for nitroaromatic analytes and display different fluorescence quenching responses. The quenching efficiencies are dependent upon the spectral overlap between the absorbance of the analyte and the emission of the fluorescent polymer. Optical fingerprints are obtained, based on the unique response patterns of the analytes toward the polymers. With this small sensor array, one can distinguish nine nitroaromatic analytes with 100% accuracy. The amphiphilic polymer F127 (a polyethylene glycol-polypropylene glycol block copolymer) carries the hydrophobic HCPs and self-assembles into micelles in water, forming highly fluorescent HCP micelles. The micelle-bound conjugated polymers detect nitroaromatic analytes effectively in water and show an increased sensitivity compared to the sensing of nitroaromatics in organic solvents. The nitroarenes are also discriminated in water using this four-element chemical tongue.

Printing PPEs: Fundamental Structure-Property Relationships.

A series of differentially alkyl- and alkoxy-substituted poly(para-pheneyleneethynylene)s of different molecular weight were prepared and their rheological properties investigated. It was found that the side chain structure of the PPEs of roughly equal molecular weight and degree of polymerization has a significant influence on the rheology and printing behavior of the PPEs. Introduction of branched alkoxy or alkyl substituents improve the printing behavior of the PPEs dramatically.