Your browser doesn't support javascript.
loading
Show: 20 | 50 | 100
Results 1 - 5 de 5
Filter
1.
Nanoscale Res Lett ; 5(11): 1788-1794, 2010 Aug 01.
Article in English | MEDLINE | ID: mdl-21124627

ABSTRACT

Phosphor-free apple-white light emitting diodes have been fabricated using a dual stacked InGaN/GaN multiple quantum wells comprising of a lower set of long wavelength emitting indium-rich nanostructures incorporated in multiple quantum wells with an upper set of cyan-green emitting multiple quantum wells. The light-emitting diodes were grown on nano-epitaxially lateral overgrown GaN template formed by regrowth of GaN over SiO(2) film patterned with an anodic aluminum oxide mask with holes of 125 nm diameter and a period of 250 nm. The growth of InGaN/GaN multiple quantum wells on these stress relaxed low defect density templates improves the internal quantum efficiency by 15% for the cyan-green multiple quantum wells. Higher emission intensity with redshift in the PL peak emission wavelength is obtained for the indium-rich nanostructures incorporated in multiple quantum wells. The quantum wells grown on the nano-epitaxially lateral overgrown GaN has a weaker piezoelectric field and hence shows a minimal peak shift with application of higher injection current. An enhancement of external quantum efficiency is achieved for the apple-white light emitting diodes grown on the nano-epitaxially lateral overgrown GaN template based on the light -output power measurement. The improvement in light extraction efficiency, η(extraction,) was found to be 34% for the cyan-green emission peak and 15% from the broad long wavelength emission with optimized lattice period.

2.
Nanotechnology ; 19(40): 405303, 2008 Oct 08.
Article in English | MEDLINE | ID: mdl-21832613

ABSTRACT

We report on the fabrication of a nano-cone structured p-GaN surface for enhanced light extraction from tunable wavelength light emitting diodes (LEDs). Prior to p-contact metallization, self-assembled colloidal particles are deposited and used as a mask for plasma etching to create nano-cone structures on the p-GaN layer of LEDs. A well-defined periodic nano-cone array, with an average cone diameter of 300 nm and height of 150 nm, is generated on the p-GaN surface. The photoluminescence emission intensity recorded from the regions with the nano-cone array is increased by two times as compared to LEDs without surface patterning. The light output power from the LEDs with surface nano-cones shows significantly higher electroluminescence intensity at an injection current of 70 mA. This is due to the internal multiple scattering of light from the nano-cone sidewalls. Furthermore, we have shown that with an incorporation of InGaN nanostructures in the quantum well, the wavelength of these surface-patterned LEDs can be tuned from 517 to 488 nm with an increase in the injection current. This methodology may serve as a practical approach to increase the light extraction efficiency from wavelength tunable LEDs.

3.
Conf Proc IEEE Eng Med Biol Soc ; 2006: 5188-91, 2006.
Article in English | MEDLINE | ID: mdl-17945884

ABSTRACT

In the next generation of Infocommunications, mobile Internet-enabled devices and third generation mobile communication networks have become reality, location based services (LBS) are expected to be a major area of growth. Providing information, content and services through positioning technologies forms the platform for new services for users and developers, as well as creating new revenue channels for service providers. These crucial advances in location based services have opened up new opportunities in real time patient tracking for personal healthcare applications. In this paper, a hybrid mobile-based location technique using the global positioning system (GPS) and cellular mobile network infrastructure is employed to provide the location tracking capability. This function will be integrated into the patient location tracking system (PLTS) to assist caregivers or family members in locating patients such as elderly or dependents when required, especially in emergencies. The capability of this PLTS is demonstrated through a series of location detection tests conducted over different operating conditions. Although the model is at its initial stage of development, it has shown relatively good accuracy for position tracking and potential of using integrated wireless technology to enhance the existing personal healthcare communication system through location based services.


Subject(s)
Medical Informatics Applications , Telemedicine , Algorithms , Biomedical Technology , Cell Phone , Computer Communication Networks , Delivery of Health Care , Equipment Design , Hospital Information Systems , Humans , Monitoring, Ambulatory , Reproducibility of Results , Systems Integration , Telecommunications
4.
Conf Proc IEEE Eng Med Biol Soc ; 2006: 6265-8, 2006.
Article in English | MEDLINE | ID: mdl-17947185

ABSTRACT

Advances in sensor technology, personal mobile devices, and wireless broadband communications are enabling the development of an integrated personal mobile health monitoring system that can provide patients with a useful tool to assess their own health and manage their personal health information anytime and anywhere. Personal mobile devices, such as PDAs and mobile phones, are becoming more powerful integrated information management tools and play a major role in many people's lives. We focus on designing a health-monitoring system for people who suffer from cardiac arrhythmias. We have developed computer simulation models to evaluate the performance of appropriate electrocardiogram (ECG) analysis techniques that can be implemented on personal mobile devices. This paper describes an ECG analyzer to perform ECG beat and episode detection and classification. We have obtained promising preliminary results from our study. Also, we discuss several key considerations when implementing a mobile health monitoring solution. The mobile ECG analyzer would become a front-end patient health data acquisition module, which is connected to the Personal Health Information Management System (PHIMS) for data repository.


Subject(s)
Electrocardiography, Ambulatory/instrumentation , Electrocardiography/instrumentation , Monitoring, Ambulatory/instrumentation , Monitoring, Physiologic/methods , Telemedicine/methods , Arrhythmias, Cardiac/diagnosis , Artifacts , Computer Communication Networks , Computer Simulation , Computers, Handheld , Diagnosis, Computer-Assisted/methods , Electrocardiography/methods , Electrocardiography, Ambulatory/methods , Equipment Design , Humans , Monitoring, Ambulatory/methods , Movement , Software
5.
Conf Proc IEEE Eng Med Biol Soc ; 2006: 6312-5, 2006.
Article in English | MEDLINE | ID: mdl-17945953

ABSTRACT

A distributed personal health information management system (D-PHIMS) has been tested at a nursing home for the senior citizens (NHSC) in Singapore. The personal health information management system (PHIMS) from the University of Washington was customized to Singapore's context for teledermatology. A clinical trial commenced in October 2005 is ongoing and the survey results obtained indicate that the participants are satisfied with the D-PHIMS system. The diagnosis and treatment recommendations made by the dermatologists using the D-PHIMS diagnosis module were effective in most cases based on feedback from the nursing staff at the elderly nursing home. The results suggest that a teledermatology system could become a useful tool for the nursing homes and to control increasing healthcare costs for elderly care.


Subject(s)
Dermatology/instrumentation , Management Information Systems , Aged , Databases, Factual , Diagnosis, Computer-Assisted , Health Services for the Aged , Homes for the Aged , Humans , Information Systems , Internet , Long-Term Care , Medical Records Systems, Computerized , Nurses , Nursing Homes , Singapore , Software , Telemedicine
SELECTION OF CITATIONS
SEARCH DETAIL