Comparison of copper and graphene-assembled films in 5G wireless communication and THz electromagnetic-interference shielding.

Since first developed, the conducting materials in wireless communication and electromagnetic interference (EMI) shielding devices have been primarily made of metal-based structures. Here, we present a graphene-assembled film (GAF) that can be used to replace copper in such practical electronics. The GAF-based antennas present strong anticorrosive behavior. The GAF ultra-wideband antenna covers the frequency range of 3.7 GHz to 67 GHz with the bandwidth (BW) of 63.3 GHz, which exceed ~110% than the copper foil-based antenna. The GAF Fifth Generation (5G) antenna array features a wider BW and lower sidelobe level compared with that of copper antennas. EMI shielding effectiveness (SE) of GAF also outperforms copper, reaching up to 127 dB in the frequency range of 2.6 GHz to 0.32 THz, with a SE per unit thickness of 6,966 dB/mm. We also confirm that GAF metamaterials exhibit promising frequency selection characteristics and angular stability as flexible frequency selective surfaces.

Compact and Low-Profile UWB Antenna Based on Graphene-Assembled Films for Wearable Applications.

In this article, a graphene-assembled film (GAF)-based compact and low-profile ultra-wide bandwidth (UWB) antenna is presented and tested for wearable applications. The highly conductive GAFs (~106 S/m) together with the flexible ceramic substrate ensure the flexibility and robustness of the antenna, which are two main challenges in designing wearable antennas. Two H-shaped slots are introduced on a coplanar-waveguide (CPW) feeding structure to adjust the current distribution and thus improve the antenna bandwidth. The compact GAF antenna with dimensions of 32 × 52 × 0.28 mm3 provides an impedance bandwidth of 60% (4.3-8.0 GHz) in simulation. The UWB characteristics are further confirmed by on-body measurements and show a bending insensitive bandwidth of ~67% (4.1-8.0 GHz), with the maximum gain at 7.45 GHz being 3.9 dBi and 4.1 dBi in its flat state and bent state, respectively. Our results suggest that the proposed antenna functions properly in close proximity to a human body and can sustain repetitive bending, which make it well suited for applications in wearable devices.

Ultrahigh Conductive Copper/Large Flake Size Graphene Heterostructure Thin-Film with Remarkable Electromagnetic Interference Shielding Effectiveness.

To guarantee the normal operation of next generation portable electronics and wearable devices, together with avoiding electromagnetic wave pollution, it is urgent to find a material possessing flexibility, ultrahigh conductive, and superb electromagnetic interference shielding effectiveness (EMI SE) simultaneously. In this work, inspired by a building bricks toy with the interlock system, we design and fabricate a copper/large flake size graphene (Cu/LG) composite thin film (≈8.8 µm) in the light of high temperature annealing of a large flake size graphene oxide film followed by magnetron sputtering of copper. The obtained Cu/LG thin-film shows ultrahigh thermal conductivity of over 1932.73 (±63.07) W m-1 K-1 and excellent electrical conductivity of 5.88 (±0.29) × 106 S m-1 . Significantly, it also exhibits a remarkably high EMI SE of over 52 dB at the frequency of 1-18 GHz. The largest EMI SE value of 63.29 dB, accorded at 1 GHz, is enough to obstruct and absorb 99.99995% of incident radiation. To the best of knowledge, this is the highest EMI SE performance reported so far in such thin thickness of graphene-based materials. These outstanding properties make Cu/LG film a promising alternative building block for power electronics, microprocessors, and flexible electronics.

Dual-Circularly Polarized and Flexible Metasurface Antenna Based on Graphene Assembled Film for Satellite Communications.

Traditional metal materials used in electronic devices are often problematic due to issues like bending resistance, oxidation leading to failure, and environmental pollution. To address these challenges, microwave electronic devices are constantly casting around for metal substitute materials with additional characteristics such as flexibility, anticorrosive, and eco-friendly. However, finding suitable materials that are accessible for radiofrequency (RF) applications is a difficult yet promising task. Consequently, a high-performance metasurface antenna based on highly conductive graphene films for satellite communications is developed in this paper. The proposed graphene assembled films (GAFs) have a conductivity of up to 1.13 × 106 S/m. Simulation and measurement results confirm the excellent performance of the designed antenna. Comparative experiments are also conducted on salt spray and mechanical bending between GAF antenna patterns and copper foil counterparts, further demonstrating the outstanding flexible property and corrosion resistance performance of prepared GAFs.

A Quad-Band and Polarization-Insensitive Metamaterial Absorber with a Low Profile Based on Graphene-Assembled Film.

A quad-band metamaterial absorber using a periodically arranged surface structure placed on an ultra-thin substrate is demonstrated in this paper. Its surface structure consists of a rectangular patch and four L-shaped structures distributed symmetrically. The surface structure is able to have strong electromagnetic interactions with incident microwaves, thereby generating four absorption peaks at different frequencies. With the aid of the near-field distributions and impedance matching analysis of the four absorption peaks, the physical mechanism of the quad-band absorption is revealed. The usage of graphene-assembled film (GAF) provides further optimization to increase the four absorption peaks and promotes the low-profile characteristic. In addition, the proposed design has good tolerance to the incident angle in vertical polarization. The proposed absorber in this paper has the potential for filtering, detection, imaging, and other communication applications.

Anti-High-Power Microwave RFID Tag Based on Highly Thermal Conductive Graphene Films.

In this paper, a radio frequency identification (RFID) tag is designed and fabricated based on highly electrical and thermal conductive graphene films. The tag operates in the ultrahigh-frequency (UHF) band, which is suitable for high-power microwave environments of at least 800 W. We designed the protection structure to avoid charge accumulation at the antenna's critical positions. In the initial state, the read range of the anti-high-power microwave graphene film tag (AMGFT) is 10.43 m at 915 MHz. During the microwave heating experiment, the aluminum tag causes a visible electric spark phenomenon, which ablates the aluminum tag and its attachment, resulting in tag failure and serious safety issues. In contrast, the AMGFT is intact, with its entire read range curve growing and returning to its initial position as its temperature steadily decreases back to room temperature. In addition, the proposed dual-frequency tag further confirms the anti-high-power microwave performance of graphene film tags and provides a multi-scenario interactive application.

Millimeter-Wave and Short-Range Wireless Communication Antenna Based on High-Conductivity Graphene-Assembled Film.

Millimeter-wave and short-range wireless communication is an important part of the Internet of Things due to its advantages of high transmission speed and large data capacity. In this paper, two antenna arrays operating at typical millimeter-wave bands (45 and 60 GHz) based on graphene-assembled films (GAF) are proposed for short-range wireless communication application. The 45 GHz graphene-assembled film antenna array is in the form of a magnetoelectric dipole antenna with a strip slot coupling to achieve bidirectional radiation, which offers an operating bandwidth of 40-49.5 GHz with a realized gain of 11.8 dBi. The 60 GHz graphene-assembled film antenna utilizes a microstrip discontinuous radiation array to achieve radiation with an operating bandwidth of 59-64 GHz, reaching the peak realized gain of 14.92 dBi over the working frequency. Finally, we proposed an experimental validation to verify the transmission performance of both antenna arrays in an actual conference room. The results show that the signal drops slowly in the room with drop rates of 0.064 dB/cm (at 45 GHz) and 0.071 dB/cm (at 60 GHz), while it steeply dropped through the wall with the drop rates of 2.3 and 3.13 dB/cm, more than 35-fold difference in signal drop rates in the room and through the wall. It has been confirmed that the proposed antenna arrays can successfully realize fast indoor short-range wireless communication while also preventing signal leakage through walls, thereby enhancing the security of information. In summary, this is the first time that we have applied graphene-based materials to millimeter-wave and short-range wireless communications, revealing the significant potential of carbon-based materials in high-frequency communication systems.

A Dual-Band Conformal Antenna Based on Highly Conductive Graphene-Assembled Films for 5G WLAN Applications.

Flexible electronic devices are widely used in the Internet of Things, smart home and wearable devices, especially in carriers with irregular curved surfaces. Light weight, flexible and corrosion-resistant carbon-based materials have been extensively investigated in RF electronics. However, the insufficient electrical conductivity limits their further application. In this work, a flexible and low-profile dual-band Vivaldi antenna based on highly conductive graphene-assembled films (GAF) is proposed for 5G Wi-Fi applications. The proposed GAF antenna with the profile of 0.548 mm comprises a split ring resonator and open circuit half wavelength resonator to implement the dual band-notched characteristic. The operating frequency of the flexible GAF antenna covers the Wi-Fi 6e band, 2.4-2.45 GHz and 5.15-7.1 GHz. Different conformal applications are simulated by attaching the antenna to the surface of cylinders with different radii. The measured results show that the working frequency bands and the radiation patterns of the GAF antenna are relatively stable, with a bending angle of 180°. For demonstration of practical application, the GAF antennas are conformed to a commercial router. The spectral power of the GAF antenna router is greater than the copper antenna router, which means a higher signal-to-noise ratio and a longer transmission range can be achieved. All results indicate that the proposed GAF antenna has broad application prospects in next generation Wi-Fi.

A Graphene-Based Stopband FSS with Suppressed Mutual Coupling in Dielectric Resonator Antennas.

A novel stopband frequency-selective surface (FSS) made of high-conductivity graphene assemble films (HCGFs) for reducing the mutual coupling between dielectric resonator antennas (DRAs) is investigated and presented. The FSS is a "Hamburg" structure consisting of a two-layer HCGF and a one-layer dielectric substrate. A laser-engraving technology is applied to fabricate the FSS. The proposed improved Jerusalem cross FSS, compared with cross FSS and Jerusalem cross FSS, can effectively reduce the size of the unit cell by 88.89%. Moreover, the FSS, composing of 2 × 10-unit cells along the E-plane, is proposed and embedded between two DRAs, which nearly has no effect on the reflection coefficient of the antenna. However, the mutual coupling is reduced by more than 7 dB on average (7.16 dB at 3.4 GHz, 7.42 dB at 3.5 GHz, 7.71 dB at 3.6 GHz) with the FSS. The patterns of the antenna are also measured. Therefore, it is suggested that the proposed FSS is a good candidate to reduce mutual coupling in the multiple-input-multiple-output (MIMO) antenna system for 5G communication.

Flexible Graphene-Assembled Film-Based Antenna for Wireless Wearable Sensor with Miniaturized Size and High Sensitivity.

The flexible radio frequency (RF) wireless antennas used as sensors, which can detect signal variation resulting from the deformation of the antenna, have attracted increasing attention with the development of wearable electronic devices and the Internet of Things (IoT). However, miniaturization and sensitivity issues restrict the development of flexible RF sensors. In this work, we demonstrate the application of a flexible and highly conductive graphene-assembled film (GAF) for antenna design. The GAF with a high conductivity of 106 S/m has the advantages of light weight, high flexibility, and superb mechanical stability. As a result, a small-size (50 mm × 50 mm) and flexible GAF-based antenna operating at 3.13-4.42 GHz is achieved, and this GAF antenna-based wireless wearable sensor shows high strain sensitivities of 34.9 for tensile bending and 35.6 for compressive bending. Furthermore, this sensor exhibits good mechanical flexibility and structural stability after a 100-cycle bending test when attached to the back of the hand and the wrist, which demonstrates broad application prospects in health-monitoring devices, electronic skins, and smart robotics.

High conductive graphene assembled films with porous micro-structure for freestanding and ultra-low power strain sensors.

Graphene emerges as an ideal material for constructing high-performance strain sensors, due to its superior mechanical property and high conductivity. However, in the process of assembling graphene into macroscopic materials, its conductivity decreases significantly. Also, tedious fabrication process hinders the application of graphene-based strain sensors. In this work, we report a freestanding graphene assembled film (GAF) with high conductivity ((2.32 ± 0.08) × 105 S m-1). For the sensitive materials of strain sensors, it is higher than most of reported carbon nanotube and graphene materials. These advantages enable the GAF to be an ultra-low power consumption strain sensor for detecting airflow and vocal vibrations. The resistance of the GAF remains unchanged with increasing temperature (20-100 ℃), exhibiting a good thermal stability. Also, the GAF can be used as a strain sensor directly without any flexible substrates, which greatly simplifies the fabrication process in comparison with most reported strain sensors. Additionally, the GAF used as a pressure sensor with only ~4.7 µW power is investigated. This work provides a new direction for the preparation of advanced sensors with ultra-low power consumption, and the development of flexible and energy-saving electronic devices.

Flexible and transparent graphene/silver-nanowires composite film for high electromagnetic interference shielding effectiveness.

Herein, an efficient approach to prepare flexible, transparent, and lightweight films based on graphene nanosheets (GNS) and silver nanowires (AgNWs) for high electromagnetic interference (EMI) shielding effectiveness (SE) has been explained. High-conductive GNS were fabricated by liquid phase stripping and composited with AgNWs by a two-step spin-coating method. Owing to the high transparency, good conductivity, and homogeneous distribution of both GNS and AgNWs, the obtained GNS/AgNWs film exhibits superb EMI SE and light transmittance, yielding a significantly high EMI SE up to 26 dB in both Ku-band and K-band and light transmittance higher than 78.4%. Moreover, this GNS/AgNWs film shows good flexibility and excellent structural stability. The obtained flexible, light and transparent film could have a great potential for transparent EMI shielding and smart electronics.