New frontiers of soil fungal microbiome and its application for biotechnology in agriculture.

The fungi-based technology provided encouraging scenarios in the transition from a conventionally based economic system to the potential security of sources closely associated with the agricultural sphere such as the agriculture. In recent years, the intensification of fungi-based processes has generated significant gains, additionally to the production of materials with significant benefits and strong environmental importance. Furthermore, the growing concern for human health, especially in the agriculture scenario, has fostered the investigation of organisms with high biological and beneficial potential for use in agricultural systems. Accordingly, this study offered a comprehensive review of the diversity of the soil fungal microbiome and its main applications in a biotechnological approach aimed at agriculture and food chain-related areas. Moreover, the spectrum of opportunities and the extensive optimization platform for obtaining fungi compounds and metabolites are discussed. Finally, future perspectives regarding the insurgency of innovations and challenges on the broad rise of visionary solutions applied to the biotechnology context are provided.

Combination of chemical coagulation and membrane-based separation for dairy wastewater treatment.

An important factor resulted from the ascension of the milk and milk-based by-products production is many effluents directly released into the environment. The main objective of this study was to evaluate the efficiency of the combination of the chemical coagulation, with ferric chloride as a coagulant, and the membrane separation processes (MSP) and reverse osmosis (RO) processes in the treatment of effluents from a powdered milk dairy industry. To evaluate the effectiveness of the integration of these mechanisms, the characterization of the effluents was carried out through Total Nitrogen (Ntotal), Total Organic Carbon (TOC), Chemical Oxygen Demand (COD), color, pH, and turbidity analysis. Regarding the treatments with ferric chloride, the Ntotal removal was up to 55.7% (concentration of 1.2 g L- 1) and the color up to 50% (0.7 g L- 1). For the MSP and RO treatments, the color removal was up to 100% (1st RO), turbidity up to 100% (1st RO), COD up to 98.7% (3rd RO), and TOC up to 96.7% (3rd RO). Finally, the integration of the chemical coagulation and MSP processes was efficient for the treatment of dairy industry wastewater and provides the return of water in appropriate characteristics according to legislation.

Bioherbicidal potential of different species of Phoma: opportunities and challenges.

Modern agriculture has been facing new challenges and fostering innovations to establish sustainable plant production. An integral part of these strategies is implementing new eco-friendly technologies in plant protection for better human health and a safer environment by minimizing the use of hazardous chemicals and also encouraging innovations such as the use of bio-based strategies for weed control. This specific strategy addresses the need to reduce the use and risk of pesticides, replacing conventional chemical herbicides with new bio-based solutions. In response to these issues, biocontrol strategies are gaining increased attention from stakeholders such as farmers, seed companies, agronomists, breeders, and consumers. Among these, bioherbicides have huge potential for the management of harmful weeds without affecting the natural quality of the environment and human health. In this context, this review is devoted to present an overview of the mycoherbicidal potential of Phoma sensu lato group of fungi, examining the advances in this field, including technological and scientific challenges and outcomes achieved in recent years. The mycoherbicides are eco-friendly and economically viable. KEY POINTS: • Some Phoma species have demonstrated herbicide activity. • These species secrete secondary metabolites responsible for the control of weeds. • They can be used as non-chemical, cost-effective, and eco-friendly bioherbicides.

Extraction and characterization of polysaccharide-enriched fractions from Phoma dimorpha mycelial biomass.

Ultrasound-assisted extraction (UAE) and pressurized hot water extraction (PHWE) were tested as advanced clean methods to obtain polysaccharides from Phoma dimorpha mycelial biomass. These methods were compared to conventional extraction (hot water extraction, HWE) in terms of polysaccharides-enriched fractions (PEF) yield. A central composite rotational design was performed for each extraction method to investigate the influence of independent variables on the yield and to help the selection of the condition with the highest yield using water as an extraction solvent. The best extraction condition of PEF yielded 12.02 wt% and was achieved when using UAE with direct sonication for 30 min under the intensity of 75.11 W/cm2 and pulse factor of 0.57. In the kinetic profiles, the highest yield (15.28 wt%) was obtained at 50 °C under an ultrasound intensity of 75.11 W/cm2 and a pulse factor of 0.93. Structural analysis of extracted polysaccharide was performed using Fourier-transform infrared spectroscopy, X-ray diffraction, scanning electron microscopy, and thermal property. The water solubility index, water holding capacity, and emulsification index of PEF were 31.3 ± 1.5%, 138.1 ± 3.2%, and 62.9 ± 2.3%, respectively. The submerged fermentation demonstrates the huge potential of Phoma dimorpha to produce polysaccharides with bioemulsifying properties as a biotechnologically cleaner alternative if compared to commercial petroleum-derived compounds. Furthermore, UAE and PHWE are green technologies, which can be operated at an industrial scale for PEF extraction.

Lipases in liquid formulation for biodiesel production: Current status and challenges.

Enzymatic synthesis of biodiesel showed advantageous characteristics in relation to other technologies once it works under bland conditions, no generation of wastewater, no occurrence of saponifications reactions and production of a biodiesel with high quality. Although many researches still apply immobilized lipases, the high costs associated with this biocatalyst hamper the economic viability of the process. Lipases in free/soluble/liquid formulation employed to biodiesel production via hydroesterification reaction have attracted interest from researchers because they are more cost effective than the immobilized form, making the enzymatic route more competitive. In addition, soluble lipases present higher reaction rates, reducing the time required to obtain a satisfactory biodiesel yield. Despite the fact that already exist industrial plants producing biodiesel with the assistance of lipases in liquid formulation, results of researches show that the process still needs to overcome some drawbacks. This paper is a comprehensive and critical discussion on the publications where soluble lipases were applied on biodiesel synthesis, as well as the challenges that the technology faces and its current status in pilot and industrial applications.

Improving the soluble lipase-catalyzed biodiesel production through a two-step hydroesterification reaction system.

The application of lipases in liquid formulation instead of immobilized forms in the enzymatic biodiesel synthesis can make the process cost-efficient, more competitive, and sustainable. However, despite the benefits, the long reaction times required to achieve satisfactory yields is still a drawback of this biotechnological process. In this sense, employing the novel low-cost soluble NS40116 lipase, this paper proposes an innovative two-step hydroesterification reaction (TSHR) system as a technique of improving the reaction rate of an enzymatic biodiesel production. With the employment of two central composite statistical design to optimize the parameters of each of the reactions involved, the influence of the parameters "water concentration added to the reaction," "methanol-to-oil molar ratio," and "lipase load" on the process yield, besides the acid value of the samples, was investigated. After only 8 h of reaction, the highest fatty acid methyl ester yield reached was 97.1% with an acid value of 4.62 mg KOH g-1 utilizing a total of 8 wt% water, methanol-to-oil molar ratio of 6.3:1, and 0.70 wt% of lipase. Furthermore, the statistical models for both reactions indicated to be significant with 95% of reliability. Considering that the papers published using soluble lipases in a one-step batch process normally reach similar yields to those obtained in this research after 16 h to 24 h of reaction, the proposed system demonstrated to be a promising option of process configuration for the enzymatic production of biodiesel.

Soluble lipase-catalyzed synthesis of methyl esters using a blend of edible and nonedible raw materials.

This work investigates the use of blends of edible and nonedible raw materials as an alternative feedstock to fatty acid methyl esters (FAME) production through enzymatic catalysis. As biocatalyst, liquid lipase from Thermomyces lanuginosus (Callera™ Trans L), was used. Under reaction conditions of 35 °C, methanol to feedstock molar ratio of 4.5:1 and 1.45% of catalyst load, the best process performance was reached using 9% of water concentration in the medium-yield of 79.9% after 480 min of reaction. In terms of use of tallow mixed with soybean oil, the best yield was obtained when 100% of tallow was used in the process-84.6% after 480 min of reaction-behavior that was associated with the degree of unsaturation of the feedstock, something by that time, not addressed in papers of the area. The results show that tallow can be used as an alternative to FAME production, catalyzed by soluble lipase.

Formulation of chicken sausages with broiler blood proteins and dye.

Dye and proteins recovered from broiler blood were used in the formulation of chicken sausages in substitution of soy proteins and synthetic dyes. Three formulations of chicken sausages were prepared: standard, liquid plasma, and freeze-dried plasma. The application of protein and blood dye in the formulation of sausages and sensory analysis followed the Brazilian legislation. Physicochemical, microbiological and sensory attributes of sausages were evaluated during 60. All the formulations met the physicochemical and microbiological requirements. Considering the sensory analysis, sausages prepared using freeze-dried plasma presented significant difference from the standard sausage. There was no significant difference in the acceptance between the standard and liquid plasma sausages. Therefore, the use of such byproducts can add value to meat products without any adverse effect consumers acceptability.

Fatty acid profile of pecan nut oils obtained from pressurized n-butane and cold pressing compared with commercial oils.

This short note compares the chemical profile of pecan nut oil samples obtained from pressurized n-butane and cold pressing with two commercial oils. The conventional cold pressing technique yielded 58.9 wt%, while pressurized n-butane yielded from 53 to 65 wt%, being the highest yield at 55 °C, and pressure of 40 bar. The n-butane behaves nearly like a piston fluid within the experimental conditions used. The results showed that the extraction variables had a slight influence on the fatty acid composition of the samples. Extraction with n-butane thus showed to be a promising alternative technique to conventional extraction methods, as very mild operating conditions and eco-friendly solvent can be used to provide good results without any residues in the final product.

Phytochemical profile, antioxidant and antimicrobial activity of extracts obtained from erva-mate (Ilex paraguariensis) fruit using compressed propane and supercritical CO2.

Traditionally, Ilex paraguariensis leaves are consumed in tea form or as typical drinks like mate and terere, while the fruits are discarded processing and has no commercial value. The aim of this work to evaluate phytochemical properties, total phenolic compounds, antioxidant and antimicrobial activity of extracts of Ilex paraguariensis fruits obtained from supercritical CO2 and compressed propane extraction. The extraction with compressed propane yielded 2.72 wt%, whereas with supercritical CO2 1.51 wt% was obtained. The compound extracted in larger amount by the two extraction solvents was caffeine, 163.28 and 54.17 mg/g by supercritical CO2 and pressurized propane, respectively. The antioxidant activity was more pronounced for the supercritical CO2 extract, with no difference found in terms of minimum inhibitory concentration for Staphylococcus aureus for the two extracts and better results observed for Escherichia coli when using supercritical CO2.

Extraction, chemical characterization and antioxidant activity of Litchi chinensis Sonn. and Avena sativa L. seeds extracts obtained from pressurized n-butane.

The extraction of litchi (Litchi chinensis Sonn.) and oat (Avena sativa L.) seeds were investigated using n-butane as pressurized solvent by evaluating the effect of pressure in the range of 7-100 bar and temperature from 25 to 70 °C on the extract yield and chemical composition together with the antioxidant activity of the extracts obtained. It was experimentally observed extraction yields for both seeds up to ~3.5 wt%, with a total phenolic content around 126.4 mg GAE/100 g of extract, and an antioxidant activity up to 78.36%. Oat seeds extract presented higher values of these parameters evaluated compared to litchi extract. Based on the results found, it seems that n-butane may be a promising solvent to conventional extraction methods, as mild operating conditions and eco-friendly solvent can be used to provide good results without any residues in the final product.

Effect of magnetic field on the ultrafiltration of bovine serum albumin.

This work evaluates the effects of a static magnetic field on the permeation of bovine serum albumin (BSA) in a tangential ultrafiltration membrane module. Experimental tests were carried out at different pHs using a poly(sulfone) membrane with molecular weight cut off of 60 kDa under the influence of a 0.4 T neodymium-iron-boron magnetic field. Results showed an increase in the permeate flux of water after the cleaning procedures of the new and reused membranes in the presence of the magnetic field. The elusive mechanism of magnetic memory is also shown to take place for the water fluxes fully recovered after the cleaning procedures when the magnetic field was applied to the system before the permeation. When the magnetic field was applied during permeation, the water fluxes presented lower percent of recuperation after the cleaning procedures, thus suggesting that the BSA solution may have somewhat been influenced by magnetic memory.

Microencapsulation of Brazilian Cherokee blackberry extract by freeze-drying using maltodextrin, gum Arabic, and pectin as carrier materials.

There are many blackberry cultivars in Brazil; however, the characteristics and applications of the Cherokee cultivar have not yet been widely studied. For this reason, this research investigated the behaviour of maltodextrin (MD), gum Arabic (GA), and pectin (PEC), as carriers combined in different proportions (20% MD, 15% MD + 5% GA, 15% MD + 5% PEC), on encapsulation of Cherokee blackberry pulp extract obtained by freeze-drying. The results of moisture content (2.73-3.36%), water activity (aw) (0.11-0.15), solubility (52.40-54.11%), hygroscopicity (17.59-21.11%), colour (hue 0.24-0.32), retention of anthocyanins (51.55-60.53%), total phenolic compounds (39.72-70.73 mg GAE/100g), antioxidant activity at 25 mg/mL (77.89-80.02%), IC50 (12.26-14.53), simulated in vitro digestion and morphology were discussed. Concerning morphology, blackberry powders had irregular structures and amorphous structures. Comparatively, the best results were obtained for MD-GA. MD-GA presented the highest content of phenolic compounds (70.73 ± 1.84 mg GAE/100g) and antioxidant activity (80.02%), as well as the lowest IC50 value (12.26). In general, all powders showed an increase in phenolic compounds during in vitro digestion, because of the pH conditions and digestive enzymes present in the simulated digestive fluid. This result shows that the wall material provides protection, since the blackberry rich extract (RE) showed degradation of phenolic compounds in in vitro digestion. In this sense, freeze-drying is a suitable technique for the encapsulation of Cherokee blackberry pulp extract.

Sequential Process of Subcritical Water Hydrolysis and Hydrothermal Liquefaction of Butia Capitata Endocarp to Obtain Fermentable Sugars, Platform Chemicals, Bio-oil, and Biochar.

Butia capitata endocarp (BCE) is a biomass residue with the potential to produce a wide variety of bio-products. The processing of BCE in a sequential process of subcritical water hydrolysis (SWH) and hydrothermal liquefaction (HTL) was investigated to obtain fermentable sugars, platform chemicals, bio-oil, and biochar. The SWH was evaluated at 230 and 260 °C and solvent: feed mass ratios (R) of 10 and 20 for the production of fermentable sugars and platform chemicals. The solid residue from SWH was sequentially submitted to the HTL at 330 and 360 °C for bio-oil and biochar production. The results were analyzed by comparing the sequential (SWH/HTL) and individual (HTL only) processes. The highest yields of fermentable sugars (5.26 g/ 100 g BCE) were obtained for SWH at 260 °C and R-20 with higher contents of xylose (2.64 g/100 g BCE) and cellobiose (1.75 g/100 g BCE). The highest yields of platform chemicals (2.44 g/100 g BCE) were obtained for SWH at 260 °C and R-10 with higher contents of acetic acid (1.78 g/100 g BCE) and furfural (0.54 g/100 g BCE). The highest yield of bio-oil (25.30 g/100 g BCE) occurred in HTL individual process at 360 °C and R-20. Sequential process SWH/HTL showed a decrease in bio-oil yield but maintained a similar biochar yield compared to HTL, in addition to the production of fermentable sugars and platform chemicals.

Kinetic and thermodynamic study of enzymatic hydroesterification mechanism to fatty acid methyl esters synthesis.

Eversa® Transform 2.0 lipase used as biocatalyst to biodiesel (fatty acid methyl esters - FAME) synthesis has been the target of interesting studies due to its thermostability and cost-effectiveness. In these researches, data about reaction conditions that result in satisfactory yields were investigated. Nevertheless, kinetic and thermodynamic parameters considering this enzyme are scarce. This paper presents an estimation of kinetic and thermodynamic parameters for the Eversa® Transform 2.0-mediated hydroesterification to FAME synthesis. Kinetic studies were performed for different methanol, water and lipase loads in distinct temperatures. Parameters adjusted by the thermodynamic model indicate that the hydrolysis is decisive in the overall hydroesterification reaction rate and the esterification reaction is endothermic (ΔHe = 38.98 kJ/mol). Formation of enzymatic complexes is favored by increasing the temperature, especially the enzyme-methanol inhibition complex. Statistical analysis showed that the model was not overparameterized, and the small confidence interval indicated good reliability of the estimated parameters.

Evaluation of ultrasound waves for the production of chitinase and ß-1,3 glucanase by Trichoderma harzianum through SSF.

Cell wall degrading enzymes (chitinase and ß-1,3-glucanase) were produced by solid-state fermentation (SSF) using the fungus Trichoderma harzianum and different agro-industrial products, mainly residues. The influence of temperature (25-35 °C), initial moisture content (50-90% w/w), nutrient solution (1-2% v/w), and yeast extract (1-2% w/w) on enzyme activity was evaluated. The application of ultrasound during fermentation for different times (0-6 h/day) was also studied. White rice was the substrate that showed the highest chitinase and ß-1,3-glucanase activities, which were 31.31 U/g for chitinase and 23.83 U/g for ß-1,3-glucanase after 10 days of fermentation. Application of ultrasound waves during fermentation positively affected (p < 0.05) the enzyme activities. The best results for chitinase (51.88 U/g) and ß-1,3-glucanase (39.22 U/g) were obtained with a 50% (w/w) moisture content and 4 h/day ultrasound application for 10 days of fermentation. Increases of 3.6-fold (from 14.37 to 51.88 U/g) and 3.8-fold (from 10.22 to 39.22 U/g) in activities for chitinase and ß-1,3-glucanase, respectively, compared to non-sonicated fermentation, were obtained. Ultrasound technique associated with the SSF process was a promising alternative to increase the production activity of cell wall degrading enzymes: chitinase and ß-1,3-glucanase.

Adsorption of basic fuchsin using soybean straw hydrolyzed by subcritical water.

The valorization of agro-industrial residues can be improved through their full use, making the production of second-generation ethanol viable. In this scenario, hydrolyzed soybean straw generated from a subcritical water process was applied to the basic fuchsin adsorption. At pH eight, a high adsorption capacity was obtained. The mass test results showed that basic fuchsin's removal and adsorption capacity could be maximized with an adsorbent dosage of 0.9 g L-1. The linear driving force model was suitable for predicting the kinetic profile, and the kinetic curves showed that equilibrium was reached with only 30 min of contact time. Besides, the Langmuir model was the best to predict the adsorption isotherms. The thermodynamic parameters revealed a spontaneous and endothermic process. At 328 K, there is maximum adsorption capacity (72.9 mg g-1). Therefore, it can be stated that this material could be competitive in terms of adsorption capacity coupled with the idea of full use of waste.

Production of biofuels from soybean straw and hull hydrolysates obtained by subcritical water hydrolysis.

The objective of this study was to evaluate the ethanol production by Wickerhamomyces sp. using soybean straw and hull hydrolysates obtained by subcritical water hydrolysis and, afterward, the biogas production using the fermented hydrolysates. Ethanol was produced using the straw and hull hydrolysates diluted and supplement with glucose, reaching 5.57 ± 0.01 g/L and 6.11 ± 0.11 g/L, respectively. The fermentation in a bioreactor with changing the pH to 7.0 allowed achieving maximum ethanol production of 4.03 and 3.60 g/L for straw and hull hydrolysates at 24 h, respectively. The biogas productions obtained for the fermented hydrolysates of straw with and without changing the pH were 739 ± 37 and 652 ± 34 NmL/gVSad, respectively. The fermented hydrolysate of hull without changing the pH presented 620 ± 26 NmL/gVSad. The soybean residues produced biofuels, indicating these residues show potential as raw material for renewable energy production.

Extraction of bioactive compounds from Senecio brasiliensis using emergent technologies.

Several plant species synthesize biologically active secondary metabolites. Pyrrolizidine alkaloids are a large group of biotoxins produced by thousands of plant species to protect against the attack of insects and herbivores, but they are highly toxic for humans and animals. In this study, extracts from the aerial part of Senecio brasiliensis were obtained using different technologies: ultrasound-assisted extraction (UAE), pressurized liquid extraction (PLE), and microwave hydrodiffusion and gravity (MHG). The study aimed to evaluate the effectiveness of these technologies for the extraction of chemical compounds found in this plant, focusing on two pyrrolizidine alkaloids: integerrimine and senecionine. Influential parameters on yield and chemical composition were also evaluated: for UAE and MHG, temperature and pressure; for PLE, temperature, and percentage of ethanol. All the extraction techniques were efficient for the extraction of integerrimine and senecionine. The UAE and PLE stood out for the higher yields and number of compounds. The PLE presented a maximum yield of 18.63% for the matrix leaf and the UAE a maximum yield of 11.82% for the same matrix. These two techniques also stood out in terms of the number of compounds, once 36 different compounds were found via PLE and 17 via UAE. SUPPLEMENTARY INFORMATION: The online version contains supplementary material available at 10.1007/s13205-021-02845-1.

Hydrothermal pretreatment of lignocellulosic biomass for hemicellulose recovery.

The hemicellulosic fraction recovery is of interest for integrated processes in biorefineries, considering the possibility of high economic value products produced from their structural compounds of this polysaccharide. However, to perform an efficient recovery, it is necessary to use biomass fractionation techniques, and hydrothermal pretreatment is highlighted as a valuable technique in the hemicellulose recovery by applying high temperatures and pressure, causing dissolution of the structure. Considering the possibility of this pretreatment technique for current approaches to hemicellulose recovery, this article aimed to explore the relevance of hydrothermal pretreatment techniques (sub and supercritical water) as a strategy for recovering the hemicellulosic fraction from lignocellulosic biomass. Discussions about potential products to be generated, current market profile, and perspectives and challenges of applying the technique are also addressed.