Arrays of nanoelectromechanical biosensors functionalized by microcontact printing.

The biofunctionalization of nanoelectromechanical systems (NEMS) is critical for the development of new classes of biosensors displaying improved performance and higher levels of integration. In this paper we propose a modified microcontact process (µCP) in order to biofunctionalize arrays of NEMS with a probe molecule on the active sensing areas together with an anti-fouling layer on the passive areas in a single, self-aligned step. We demonstrate the adequate functionalization/anti-fouling of arrays of freestanding nanocantilevers as dense as 10(5) nanostructures cm(-2) by using both fluorescence microscopy and dynamic measurements of the structures' resonant frequency. The proper bioactivity of an antibody deposited onto the cantilevers and the blocking property of a bovine serum albumin layer are both assessed by incubating specific and non-specific tagged secondary antibodies followed by fluorescence imaging. Furthermore, measurement of the resonant frequency of the nanocantilevers before and after functionalization and biological recognition demonstrate that using µCP for device functionalization does not damage the nanostructures and preserves the mechanical sensing capability of our NEMS.

Wafer scale interdigitated nanoelectrode devices functionalized using a MEMS-based deposition system.

This paper reports on a methodology to elaborate interdigitated nanoelectrode devices (INDs) at the wafer scale, relying on a mix-and-match process which combines proximity optical lithography and electron beam lithography. An optimum exposure dose allowed fabricating nanodevices, at the wafer level, with a successful yield of 97%. The final devices are bonded onto conventional TO-8 packages. Electrical characterization in a short-circuited nanoelectrode is performed, revealing a 230 µΩ cm resistivity value at 23 °C. A MEMS-based spotter made of cantilevers (called Bioplume) has been used to obtain precise functionalization of the INDs with sub-picoliter volume solutions. These INDs are the basis of multiple tunnel junction nanodevices, intended to serve as novel highly sensitive nanobiosensors.

Adult human progenitor cells from the temporal lobe: another source of neuronal cells.

OBJECTIVES: In the adult human brain, neurogenesis occurs in the SVZ and the dentate gyrus of the hippocampus, but it is still unclear whether persistent neural progenitor/stem cells are also present in other brain areas. The present work studies the possibility of obtaining neural progenitor/stem cells from the temporal lobe and investigates their potential to differentiate into neuronal cells. METHODS: Human biopsies from the temporal lobe of epileptic patients were used to isolate potential neural progenitors. Differentiation was induced in the presence of different agents (NGF, NT3, RA) and immunocytochemistry was then performed for quantitative analysis. RESULTS: It was shown that a significant number of cells in the temporal lobe are also capable of expansion and multi-potency. These cells can be amplified as neurospheres and have the potential to differentiate naturally in vitro into neurons, astrocytes and oligodendrocytes. Quantitative analyses show that the progenitor cells of the temporal lobe exhibit a better rate of neuronal differentiation in vitro than the cells from the SVZ, particularly in the presence of NGF. CONCLUSION: This study indicates that neural progenitors are also present in the human temporal lobe. Studying them could be of great interest for cell therapy in neurological disorders.

[An unusual paraneoplastic manifestation in lung cancer: eosinophilic erythroderma]. / Une manifestation paranéoplasique inhabituelle dans le cancer bronchique: l'érythrodermie hyperéosinophilique.

An 81-year-old man was admitted for generalized weakness, erythrodermia and eosinophilia. His chest CT showed nodules related to lung adenocarcinoma. Chemotherapy induced a tumour response with the disappearance of the erythrodermia and eosinophilia. A tumour relapse indicating the recurrence of the erythrodermia and eosinophilia was confirmed 2 months after completion of the chemotherapy. The outcome was rapidly fatal. The evolution of the symptoms suggests that eosinophilic erythrodermia is a paraneoplastic syndrome. Cutaneous paraneoplastic syndromes are rare but may be associated with lung cancer.

Fabrication of planar cobalt electrodes separated by a sub-10nm gap using high resolution electron beam lithography with negative PMMA.

We present a fabrication process of cobalt nanoelectrodes compatible with spin-dependent transport measurements through a few or a single nano-object. It consists in etching a cobalt thin layer into pairs of planar nanoelectrodes separated by a nanometric gap using a negative Poly-MethylMethAcrylate (PMMA) mask patterned by high resolution electron beam lithography (HREBL). The irradiation parameters of 200keV HREBL on PMMA have been investigated using atomic force microscopy (AFM) to define accurately the PMMA transformation from positive to negative tone. The influence of the electron dose and the designed gap on the final gap between electrodes is presented. This complete study proves that PMMA can be used as a HREBL negative resist to fabricate nanoelectrodes separated by a controlled and reproducible gap ranging from 5nm to several tens of nanometers.

[Granuloma at the injection site of leuprorelin acetate: foreign body reaction to polylactic acid]. / Granulome sur le site d'injection de leuproréline retard: réaction à corps étranger à l'excipient?

BACKGROUND: Gonadorelin (LH-RH) analogues are used in urology, gynaecology and paediatrics. Sterile abscesses sometimes occur at the injection site although the underlying mechanism is poorly understood. CASE REPORT: A 72 year-old man presented weeping ulceration of the right buttock several days after the 9th intramuscular injection of an LH-RH analogue (leuprorelin SR 11.25 mg) for prostate cancer. There was no local reaction following the 10th injection but an abscess was observed at the injection site after the 11th injection. Screening for an infectious aetiology was negative. Histological examination of a skin biopsy specimen demonstrated granulomatous inflammation with a necrotic centre. Intradermal reaction to triptorelin, an LH-RH analogue containing no excipient, was negative. Intradermal reaction to leuprorelin SR, which contains lactic acid polymer, was positive with the appearance of an erythematous papule after 20 minutes, as well as demonstration of granulomatous reaction upon histological examination of a biopsy specimen obtained 10 days later. DISCUSSION: This case suggests a foreign body reaction to leuprorelin SR, or more probably to the lactic acid polymer excipient, as seen with Newfill (L-polylactic acid) used to treat lipoatrophy.

Behaviour of phospholipase modified-HDL towards cultured hepatocytes. II. Increased cell cholesterol storage and bile acid synthesis.

Human total HDL (hydrated density 1.070-1.210), HDL2 (1.070-1.125), HDL3 (1.125-1.210) or HDL separated by heparin affinity chromatography were treated with or without purified phospholipase A2 from Crotalus adamanteus. Control and treated HDL were reisolated and were then incubated with cultured hepatocytes. 1. Mass measurements evidenced a time-dependent cholesterol enrichment in hepatocytes cultured in the absence of lipoproteins. Addition of HDL2 still enhanced by 25% the cell cholesterol content and down-regulated endogenous sterol synthesis in similar proportions. Conversely, HDL3 slightly decreased the amount of free cholesterol in hepatocytes (-12%). 2. Incubations with phospholipase A2-treated HDL resulted in a 35%-50% increase of both the cellular cholesterol esterification and the cholesterylester accumulation, when compared to cells cultured in the presence of control-HDL. This effect was observed with HDL2, HDL3 and combining the data with all subfractions. 3. Cultured hepatocytes secreted cholic and beta-muricholic acids as major bile acids and HDL2 showed a tendency to stimulate their secretion. Phospholipase treatment of HDL again induced an increased production by hepatocytes of those two bile acids. Thus, whereas HDL2 and HDL3 display different behaviours with respect to cell cholesterol content, neosynthesis and bile acid secretion, their modifications by phospholipases always orientate the cell sterol metabolism in the same direction: increased cholesterylester accumulation and bile acid production.

Behaviour of phospholipase-modified HDL towards cultured hepatocytes. I. Enhanced transfers of HDL sterols and apoproteins.

Human HDL subfractions (HDL2, HDL3, or HDL separated by heparin affinity chromatography) were labelled either on their apolipoprotein moiety with 125I or on their sterols: unesterified [14C]cholesterol and [3H]cholesteryl linoleyl ether, a non-hydrolysable analog of esterified cholesterol. HDL subfractions were then treated with or without phospholipase A2 from Crotalus adamanteus in presence of albumin leading to a 72-82% phosphatidylcholine degradation. Control and treated HDL were reisolated and then addressed to cultured rat hepatocytes. (A) During incubations, unesterified [14C]cholesterol from HDL3 readily appeared in hepatocytes. The specific uptake of HDL esterified cholesterol calculated from [3H]cholesteryl ether was 2-4-times less important. Uptake of HDL cholesterol tended to saturate at 150-200 micrograms/ml HDL protein. A prior phospholipase treatment of HDL3 stimulated by 2-5-fold the uptake of [3H]cholesteryl ether, whereas the transfer of free [14C]cholesterol was minimally increased. The uptake of 3H/14C-labelled sterols from HDL2 was 2-3-times higher than from HDL3. (B) Parallel experiments were conducted with 125I-labelled HDL subfractions. At 37 degrees C, the specific uptake and degradation of HDL3 125I-apolipoprotein were about 2-fold enhanced following treatment of HDL3 with phospholipase A2. Uptakes of apolipoprotein and of esterified cholesterol were compared, indicating a preferential delivery of the sterol over apoprotein (X5). The dissociation was still more pronounced with phospholipase-treated HDL3. Competition experiments showed that 12-times more unlabelled HDL3 were required to half reduce the uptake of HDL3 [3H]cholesteryl ether than to impede similarly the HDL 125I-apolipoprotein recovered in cells. Uptake of 125I-labelled apolipoprotein from HDL2 was quantitatively comparable to that from HDL3. (C) Binding of 125I-HDL subfractions was followed at 4 degrees C. A specific binding was observed for HDL2 and HDL3, although kinetic parameters were quite different (KD of 9 and 25 micrograms/ml, respectively). Following phospholipolysis, both the specific and non-specific contributions to total binding were increased. Hence, hepatocytes take up more 125I-labelled apolipoprotein and 3H/14C-labelled sterols from lipolysed HDL than from unmodified particles. This is associated to changes in the binding characteristics.

A new human pathology with visceral accumulation of long-chain n-alkanes; tissue distribution of the stored compounds and pathophysiological hypotheses.

This report deals with a new human disorder characterized by the accumulation of plant long-chain n-alkanes in viscera of a human patient. Lipid analysis of tissues from an adult male after sudden death (affected with diffuse visceral granuloma containing lipophilic crystallized material) showed the presence of abnormal compounds identified as long-chain n-alkanes with 29 (n-nonacosane), 31 (n-hentriacontane) and 33 carbons (n-tritriacontane). Study of n-alkane distribution in patient tissues showed a major accumulation in lumbo-aortic lymph nodes, adrenal glands, lung (the highest levels were found in lung granulomas) and liver; significantly lower amounts were detected in myocardium and kidney, whereas no detectable level was found in brain. On the basis of the structural composition and of the tissue distribution of the accumulated n-alkanes, their dietary (plant) origin and the pathophysiological mechanism of the storage are discussed.

Direct microcontact printing of oligonucleotides for biochip applications.

BACKGROUND: A critical step in the fabrication of biochips is the controlled placement of probes molecules on solid surfaces. This is currently performed by sequential deposition of probes on a target surface with split or solid pins. In this article, we present a cost-effective procedure namely microcontact printing using stamps, for a parallel deposition of probes applicable for manufacturing biochips. RESULTS: Contrary to a previous work, we showed that the stamps tailored with an elastomeric poly(dimethylsiloxane) material did not require any surface modification to be able to adsorb oligonucleotides or PCR products. The adsorbed DNA molecules are subsequently printed efficiently on a target surface with high sub-micron resolution. Secondly, we showed that successive stamping is characterized by an exponential decay of the amount of transferred DNA molecules to the surface up the 4th print, then followed by a second regime of transfer that was dependent on the contact time and which resulted in reduced quality of the features. Thus, while consecutive stamping was possible, this procedure turned out to be less reproducible and more time consuming than simply re-inking the stamps between each print. Thirdly, we showed that the hybridization signals on arrays made by microcontact printing were 5 to 10-times higher than those made by conventional spotting methods. Finally, we demonstrated the validity of this microcontact printing method in manufacturing oligonucleotides arrays for mutations recognition in a yeast gene. CONCLUSION: The microcontact printing can be considered as a new potential technology platform to pattern DNA microarrays that may have significant advantages over the conventional spotting technologies as it is easy to implement, it uses low cost material to make the stamp, and the arrays made by this technology are 10-times more sensitive in term of hybridization signals than those manufactured by conventional spotting technology.

Micropatterned bioimplant with guided neuronal cells to promote tissue reconstruction and improve functional recovery after primary motor cortex insult.

With the ever increasing incidence of brain injury, developing new tissue engineering strategies to promote neural tissue regeneration is an enormous challenge. The goal of this study was to design and evaluate an implantable scaffold capable of directing neurite and axonal growth for neuronal brain tissue regeneration. We have previously shown in cell culture conditions that engineered micropatterned PDMS surface with straight microchannels allow directed neurite growth without perturbing cell differentiation and neurite outgrowth. In this study, the micropatterned PDMS device pre-seeded with hNT2 neuronal cells were implanted in rat model of primary motor cortex lesion which induced a strong motor deficit. Functional recovery was assessed by the forelimb grip strength test during 3 months post implantation. Results show a more rapid and efficient motor recovery with the hNT2 neuroimplants associated with an increase of neuronal tissue reconstruction and cell survival. This improvement is also hastened when compared to a direct cell graft of ten times more cells. Histological analyses showed that the implant remained structurally intact and we did not see any evidence of inflammatory reaction. In conclusion, PDMS bioimplants with guided neuronal cells seem to be a promising approach for supporting neural tissue reconstruction after central brain injury.

Degradation, amorphization, and recrystallization of ion bombarded Si(111) surfaces studied by in situ reflection electron microscopy and reflection high energy electron diffraction techniques.

In this paper we report the effect of noble gas ions bombardment on the degradation of atomically flat Si(111) surfaces at room and high (400 degrees C-600 degrees C) temperatures. Reflection high energy electron diffraction (RHEED) and reflection electron microscopy (REM) have been used to characterize the topography and structure of the as-implanted and post annealed surface layers. It is shown that the fading of the specularly reflected beam is not directly related to the amorphization of the surface. This experimental study has also evidenced the difficulties one meets to regrow a defect-free material after amorphization by noble gas bombardment. For high temperature for which the amorphization is not possible, the surface loses its stepped structure and turns into a monocrystalline but atomically rough surface. This roughness is a function of substrate temperature.

Lipid content of human and rat pancreas.

We analyzed the lipid composition of the human pancreas and performed a parallel study on rat pancreas. Some precautions were taken in order to keep the secretory zymogens as inactive precursors in both tissues. The lipid content of the human pancreas corresponded to 5.5% of the tissue wet weight, lower than that found in pancreas of two-month-old Wistar rats (10%). In man, triglycerides and phospholipids were found at comparable levels, respectively, 37 and 30 mg/g of pancreas wet weight, not far from the values of the rat pancreas. In human pancreas, phosphatidylcholines and lysophosphatidylcholines represented about 40% of the total phospholipid fraction, phosphatidylethanolamines and lysophosphatidylethanolamines 21%, and phosphatidylserines and -inositols were found equally represented with 7.5%. The total cholesterol content accounted for about 4.5% of the total lipids; only 30% was esterified. By comparison, in rat, total cholesterol represented 3.3% of lipids and 90% was esterified. The phospholipids in human pancreas contained high amounts of saturated fatty acids (92%) mainly stearic and palmitic, whereas triglycerides contained equal amounts of saturated and unsaturated fatty acids, principally represented by oleic and palmitic acids. In rats the phospholipids contained only 63% saturated fatty acids (palmitic and stearic) and triglycerides contained 61% unsaturated fatty acids (mainly oleic and linoleic). In terms of lipid composition, there is a greater similarity between human and rat pancreas than with other known pancreas, such as the guinea pig and the ox.

[Effects of hypobaric hypoxia and erucic acid on mitochondrial triglycerides in rat heart]. / Effets de l'hypoxie hypobare et de l'acide érucique sur les triglycérides mitochondriaux du coeur de rat.

At normal atmospheric pressure, an erucic acid-supplemented diet produces an increase of heart mitochondrial triglycerides. With the same quantity of erucic acid, hypoxia emphasizes the triglyceride overload in rat heart mitochondria. Thus, hypoxia increases the risk caused by rapeseed-oil. In hypoxia or at normal atmospheric pressure, rapeseed-oil without erucic acid does not modify the level of mitochondrial triglycerides.

Hypobaric hypoxia on pulmonary wash fluid of rats.

The biochemical appearance of the alveolar border pathology, whatever the origin of the impairment may be, has become most important. This is the reason why we have studied the influence of hypobaric hypoxia, at a pressure of 370 mm Hg, on the phospholipids of pulmonary surfactant and alveolar macrophages. During the first hours we observed a decrease in the phosphatidylcholines of the pulmonary surfactant and a concomitant increase in the lysocompounds with simultaneous appearance of a phospholipase activity which seemed to have a macrophage origin.

Hepatic lipase promotes the uptake of HDL esterified cholesterol by the perfused rat liver: a study using reconstituted HDL particles of defined phospholipid composition.

The role of hepatic triacylglycerol lipase (H-TGL) in promoting the liver uptake of high density lipoprotein (HDL) free and esterified cholesterol was studied in a recirculating rat liver perfusion, a situation where the enzyme is physiologically expressed and is active at the vascular bed. For this purpose, reconstituted HDL of defined phospholipid composition were prepared, containing either 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphocholine, a substrate for H-TGL, or 1-O-hexadecyl-2-oleoyl-sn-glycero-3-phosphocholine, a non-hydrolyzable analog. Reconstituted HDL were then used in the perfused rat liver system. The main results are the following. 1) Reconstituted HDL were obtained by sonication of lipids and apolipoproteins and isolated by ultracentrifugation in the 1.07-1.21 g/ml density interval. Reconstituted HDL containing either diacylphosphatidylcholine or alkyl-acyl-phosphatidylcholine were similar in terms of chemical composition, apparent size, and apolipoprotein A-I immunoreactivity, and were comparable to native HDL3. 2) Reconstituted HDL were labeled with free [14C]cholesterol and [3H]cholesteryl ether, a non-hydrolyzable tracer of esterified cholesterol, and were perfused through the rat liver. Liver uptake of [3H]cholesteryl ether was 2.5-fold higher from reconstituted HDL containing diacylphospholipid than from HDL reconstituted with alkyl-acyl-phospholipids. Liver uptake of free [14C]cholesterol was identical in both cases. 3) H-TGL-depleted rat livers were obtained by a 12-min preperfusion in the presence of heparin, displacing 90% of the enzymatic activity. The residual activity in the perfusate was inhibited by a specific antibody directed against rat H-TGL. Liver uptake of [3H]cholesteryl ether from reconstituted HDL containing diacylphospholipid was reduced by 35% in hepatic lipase-depleted livers compared to controls. On the other hand, hepatic lipase depletion had no effect on the liver uptake of esterified cholesterol from HDL reconstituted with alkyl-acyl-phospholipids. The above findings support a role for the phospholipase A1 activity of H-TGL in stimulating the delivery of HDL esterified cholesterol to liver cells.