Transient Alterations in Streamwater Quality Induced by Pollution Incidents: Interim Losses Calculations and Compensation Alternatives Based on Habitat Equivalency Analysis.

Pollution incidents cause transient water quality alterations during the passage of contaminants' plume along watercourses, with plume passage period and contaminants' concentrations modelled by advection-dispersion equations. Despite being transient, water quality alterations can impose many impacts on the streamwater ecosystem services. This study proposes two frameworks based on Habitat Equivalency Analysis to be applied during assessments of streamwaters' pollution incidents and respective compensation panoramas: (1) Streamwater interim loss framework, to calculate interim loss debits caused by transient alterations in the streamwater quality; (2) Total credit framework, to calculate streamwater credits generated by improvements in selected watercourse's streamwater quality, produced by wastewater treatment plants in this study. The amount of credits calculated in the selected watercourses assists in the proposal of suitable compensatory remediation projects to offset interim losses. Frameworks' calculations are founded on IVA, a water quality index for protection of aquatic life and aquatic communities. Frameworks' calculations depend on three parameters: IVA, watercourses fluxes and the present value multiplier. The frameworks were calculated in ΔIVAxL, unit defined by multiplying sensed alterations in streamwater quality (as ΔIVA) and streamwater flux, in liters (L). The frameworks were applied to two major streamwater pollution incidents in Brazil, caused by the dam collapses of Mariana and Brumadinho, suggesting suitable compensatory remediations' projects for the respective streamwater interim losses. Depending on the selected project, Brumadinho compensation period varied from 2 to 5 years, with estimated costs in the 2020 Int.$ 5.7-18.7M range; Mariana compensation period varied from 8 to 20 years, with estimated costs in the 2020 Int.$ 16.7-58.1M range. Based on Brumadinho compensatory remediation projects, an average water pollution environmental damage value per interim loss was calculated, 1.17E-4 2020 Int.$/ΔIVAxL, which might be useful in comparing streamwater pollution evaluations around the world.

Incorporating Ecosystem Services in the Assessment of Water Framework Directive Programmes of Measures.

The EU Water Framework Directive requires the development of management responses aimed towards improving water quality as a result of improving ecosystem health (system state). Ecosystems have potential to supply a range of services that are of fundamental importance to human well-being, health, livelihoods and survival, and their capacity to supply these services depends on the ecosystem condition (its structure and processes). According to the WFD, Programmes of Measures should be developed to improve overall water status by reducing anthropogenic catchment pressures to levels compatible with the achievement of the ecological objectives of the directive, and when designed and implemented properly should improve the ecological condition of aquatic ecosystems that the delivery of ecosystem services depends on. Monitoring and evaluation of implemented measures are crucial for assessing their effectiveness and creating the agenda for consecutive planning cycles. Considering the challenges of achieving water status improvements, and the difficulties of communicating these to the wider public, we develop a framework for the evaluation of measures cost-effectiveness that considers ecosystem services as the benefits from the reduction of pressures on water bodies. We demonstrate its application through a case study and discuss its potential to facilitate the economic analysis required by the directive, and that most European water authorities had problems with. Findings demonstrate the potential of the methodology to effectively incorporate ecosystem services in the assessment of costs and benefits of proposed actions, as well as its potential to engage stakeholders.

A highly efficient multi-step methodology for the quantification of micro-(bio)plastics in sludge.

The present study develops a multi-step methodology for identification and quantification of microplastics and micro-bioplastics (together called in the current work micro-(bio)plastics) in sludge. In previous studies, different methods for the extraction of microplastics were devised for traditional plastics, while the current research tested the methodology on starch-based micro-bioplastics of 0.1-2 mm size. Compostable bioplastics are expected to enter the anaerobic or aerobic biological treatments that lead to end-products applicable in agriculture; some critical conditions of treatments (e.g. low temperature and moisture) can slow down the degradation process and be responsible for the presence of microplastics in the end-product. The methodology consists of an initial oxidation step, with hydrogen peroxide 35% concentrated to clear the sludge and remove the organic fraction, followed by a combination of flotation with sodium chloride and observation of the residues under a fluorescence microscope using a green filter. The workflow revealed an efficacy of removal from 94% to 100% and from 92% to 96% for plastic fragments, 0.5-2 mm and 0.1-0.5 mm size, respectively. The methodology was then applied to samples of food waste pulp harvested after a shredding pre-treatment in an anaerobic digestion (AD) plant in Italy, where polyethylene, starch-based Mater-Bi® and cellophane microplastics were recovered in amounts of 9 ± 1.3/10 g <2 mm and 4.8 ± 1.2/10 g ⩾2 mm. The study highlights the need to lower the threshold size for the quantification of plastics in organic fertilizers, which is currently set by legislations at 2 mm, by improving the background knowledge about the fate of the micro-(bio)plastics in biological treatments for the organic waste.

Cigarette Smoking: An Assessment of Tobacco's Global Environmental Footprint Across Its Entire Supply Chain.

While the health effects of cigarette smoking are well recognized and documented, the environmental impacts of tobacco are less appreciated and often overlooked. Here, we evaluate tobacco's global footprint across its entire supply chain, looking at resource needs, waste, and emissions of the full cradle-to-grave life cycle of cigarettes. The cultivation of 32.4 Mt of green tobacco used for the production of 6.48 Mt of dry tobacco in the six trillion cigarettes manufactured worldwide in 2014, were shown to contribute almost 84 Mt CO2 equiv emissions to climate change-approximately 0.2% of the global total, 490 000 tonnes 1,4-dichlorobenzene equiv to ecosystem ecotoxicity levels, and over 22 billion m3 and 21 Mt oil equiv to water and fossil fuel depletion, respectively. A typical cigarette was shown to have a water footprint of 3.7 L, a climate change contribution of 14 g CO2 equiv, and a fossil fuel depletion contribution of 3.5 g oil equiv. Tobacco competes with essential commodities for resources and places significant pressures on the health of our planet and its most vulnerable inhabitants. Increased awareness, as well as better monitoring and assessment of the environmental issues associated with tobacco, should support the current efforts to reduce global tobacco use as an important element of sustainable development.

The Transition of EU Water Policy Towards the Water Framework Directive's Integrated River Basin Management Paradigm.

Introduced in 2000 to reform and rationalise water policy and management across the European Union (EU) Member States (MS), the Water Framework Directive (WFD), the EU's flagship legislation on water protection, is widely acknowledged as the embodiment and vessel for the application of the Integrated River Basin Management (IRBM) paradigm. Its ecological objectives, perhaps even more challenging than the prospect of statutory catchment planning itself, were for all EU waters to achieve 'good status' by 2015 (except where exemptions applied) and the prevention of any further deterioration. In support of the upcoming WFD review in 2019, the paper reviews the transition of EU policies that led to the adoption of the WFD, to identify the reasons why the Directive was introduced and what it is trying to deliver, and to place progress with its implementation into context. It further investigates reasons that might have limited the effectiveness of the Directive and contributed to the limited delivery and delays in water quality improvements. Findings reveal that different interpretations on the Directive's objectives and exemptions left unresolved since its negotiation, ambiguity and compromises observed by its Common Implementation Strategy and lack of real support for the policy shift required have all been barriers to the harmonised transposition of the IRBM paradigm, the key to delivering good ecological status. The 2019 WFD review offers a unique opportunity to realign the implementation of the Directive to its initial aspirations and goals.

The role of public communication in decision making for waste management infrastructure.

Modern waste management provision seeks to meet challenging objectives and strategies while reflecting community aspirations and ensuring cost-effective compliance with statutory obligations. Its social acceptability, which affects both what systems (infrastructure) can be put in place and to what extent their implementation will be successful, is a multi-dimensional phenomenon, often not well understood. In light of the growing evidence that decisions to build new infrastructure are often contested by the public, there is a clear need to understand the role of scientific evidence in public perception, particularly as environmental infrastructure delivery is often objected to by the public on environmental grounds. In this paper the need for waste management infrastructure is reviewed, and the way its delivery in the UK has evolved is used as an example of the role of public perception in the planning and delivery of waste facilities. Findings demonstrate the vital role of public communication in waste management infrastructure delivery. Public perception must be taken into account early in the decision making process, with the public informed and engaged from the start. There is a pressing need for people not simply to accept but to understand and appreciate the need for infrastructure, the nature of infrastructure investments and development, the costs and the benefits involved, and the technological aspects. Scientific evidence and literacy have a critical role to play, facilitating public engagement in a process that empowers people, allowing them to define and handle challenges and influence decisions that will impact their lives. Problem ownership, and an increased probability of any solutions proposed being selected and implemented successfully are potential benefits of such approach.

Environmental management for dredging sediments - the requirement of developing nations.

Scientific research has characterized the effects of dredging, an underwater excavation process for navigational purposes or material extraction, and has shown its association with a number of chemical, physical and biological impacts. Due to this, much environmental management has been applied in the dredging industry in order to manage its detrimental effects. However, developing nations may have different approaches towards their dredging environmental management to compare to their companions with higher economic strength. Moreover, scientific evidence to make an informed decision is often lacking, hence affecting the number of research executed at these nations, limiting their efforts to preserve the environment. This paper reviews the dredging environmental impacts and its two important factors, dredging technology and sediment characteristic, that determine the magnitude of impacts through literature review, and discusses the need for a more integrated dredging environmental management to be developed for developing nations.

Ecological assessments of surface water bodies at the river basin level: a case study from England.

Ecological assessments of surface water bodies are essential in order to evaluate the level of degradation in freshwater ecosystems and to address the subsequent decline in services they provide. These assessments cover multiple aspects of the aquatic environment, particularly biological elements due to their ability to respond to all pressures within an ecosystem. Such assessments can enable the identification of the multiple pressures which threaten water bodies, facilitating sustainable decisions regarding their management to be identified. Here, the design requirements of the networks which facilitate ecological assessments are presented. A river basin district in England is used as a case study to investigate the number of elements monitored, the number of failing elements and the relationship between failing elements. Findings demonstrate the value of ensuring that monitoring networks are risk based and appropriately designed to meet their objectives. This therefore requires that monitoring is not only for the communicating of compliance but also for use iteratively so that the design of monitoring networks and ultimately management can be continually improved.

Public participation in soil surveys: lessons from a pilot study in England.

In many countries there are policies in place that impact on soils, but very few legislative or policy tools specifically for the protection of soil. Recent EU legislative proposals on soil protection have been met with opposition on the grounds of excessive cost and resource demands. With the need for evidence based policy, and recognition that involving the public in environmental monitoring is an effective way of increasing understanding and commitment, there has been growing interest in soil surveys. In addition, it is accepted that the success of environmental policies depends greatly on how effectively scientists, regulators, stakeholders, and society communicate. This paper presents the Open Air Laboratories (OPAL) Soil and Earthworm Survey as an example of public participation in soil surveys that aims to integrate the above. It is demonstrated how such surveys generate data that can be used to prioritise soil assessment, in order to address some of the concerns and objections to soil protection policies. Lessons from this pilot study in England highlight that with strategic planning of civic participation activities, this approach can deliver improvements in the quality of the evidence collected and allow for effective public involvement in policymaking and implementation, on top of direct educational benefits.

Food waste co-digestion with sewage sludge--realising its potential in the UK.

The application of anaerobic co-digestion of food waste with sewage sludge, although well established in many European countries, is still in its infancy in the UK. This process has many benefits to offer, with a successful application often associated with increased renewable energy potential, outweighing constraints associated with the variability of food waste and its handling requirements prior to co-digestion. With both regulations and water infrastructures designed and constructed on the basis of linear views and sectorial requirements and conditions and technologies from the past in many parts of the world, in the UK, sewage sludge and food waste digestion operations are also under very different regulatory and management regimes. With sustainability requiring that we do not address single issues in isolation, but through a systems approach that delivers integrated solutions, co-digestion of food waste with sewage sludge could become such a solution. If carefully applied, co-digestion can deliver beneficial synergies for the water industry and authorities responsible for food waste management. The collaboration of all relevant stakeholders and regulators to support changes to current regulatory frameworks to enable this, is proposed as the way forward, particularly as their complexity has been identified as the major hurdle to the implementation of co-digestion in the UK.

Cosmetics as a potential source of environmental contamination in the UK.

Chemicals of emerging concern (CECs) are frequently used in cosmetic formulations and can potentially reach the environment at concentrations that may cause harm. A methodology was developed to assess over 120 chemicals assembled from product ingredient listings to identify and validate potential CECs in cosmetics, based on Annex XIII of REACH legislation. Ten potential CECs were identified: polydimethylsiloxane, butylated hydroxylanisole (BHA), butylated hydroxytoluene, triclosan, nano titanium dioxide, nano zinc oxide, butylparaben, diethyl phthalate, octinoxate methoxycinnamate and benzophenone. These chemicals were quantified based on their consumption and concentrations in cosmetics and percentage market penetration. The initial predicted environmental concentrations (PEC initial) were estimated to determine their exposure to the environment. With the exception of BHA, the PEC initial highlighted levels of exposure to the environment that triggered the need for further investigation of the chemicals. These chemicals were linked to cosmetics to highlight products with the potential to cause environmental harm. Skin care products had the highest quantities of CECs, with titanium dioxide and zinc oxide nanomaterials being dominant potential contaminants. Further research is required to assess the exposure pathways and fate of these chemicals to determine environmental risks associated with their use and disposal.

Delineating the impact of COVID-19 on antimicrobial resistance: An Indian perspective.

The COVID-19 pandemic has shattered millions of lives globally and continues to be a challenge to public health due to the emergence of variants of concern. Fear of secondary infections following COVID-19 has led to an escalation in antimicrobial use during the pandemic, while some antimicrobials have been repurposed as treatments for SARS-CoV-2, further driving antimicrobial resistance. India is one of the largest producers and consumers of antimicrobials globally, hence the task of curbing antimicrobial resistance is a huge challenge. Practices like empirical antimicrobial prescription and repurposing of drugs in clinical settings, self-medication and excessive use of antimicrobial hygiene products may have negatively impacted the prevalence of antimicrobial resistance in India. However, the expanded production of antimicrobials and disinfectants during the pandemic in response to increased demand may have had an even greater impact on the threat of antimicrobial resistance through major impacts on the environment. The review provides an outline of the impact COVID-19 can have on antimicrobial resistance in clinical settings and the possible outcomes on the environment. This review calls for the upgrading of existing antimicrobial policies and emphasizes the need for research studies to understand the impact of the pandemic on antimicrobial resistance in India.

From chemical risk assessment to environmental quality management: the challenge for soil protection.

The 40 years that have passed since the beginning of the 'environmental revolution' has seen a large increase in development of policies for the protection of environmental media and a recognition by the public of the importance of environmental quality. There has been a shift from policy in reaction to high profile events, then to control of releases to single environmental media, and to the present position of moving toward integrated management of all environmental media at present. This development has moved away from classical chemical risk assessment toward environmental holism, including recognition of the ecological value of these media. This work details how policy developments have taken place for air and water, with examples from the USA and EU, in order to compare this with policy development regarding soil. Soil, with quite different policy frameworks and distinct uses, understanding, and threats compared to other environmental media, is currently attracting attention regarding the need for its protection independent of use. Challenges for soil policy are identified and evaluated, and recommendations on how these challenges can be overcome are discussed with relevance to water and air protection policy.

Gas emissions from biodegradable waste in United Kingdom landfills.

The aim of this research was to predict the effect that the biodegradable municipal waste (BMW) diversion targets in the European Union landfill directive (99/31/EC) would have on landfill gas emissions. This is important for continued mitigation of these emissions. Work was undertaken in three stages using the GasSim model (v1.03) developed by the Environment Agency (England and Wales). The first stage considered the contribution to gas emissions made by each biodegradable component of the waste stream. The second stage considered how gas emissions from a landfill accepting biodegradable wastes with reduced biodegradable content would be affected. The third stage looked at the contribution to gas emissions from real samples of biologically pretreated BMW. For the first two stages, data on the waste components were available in the model. For the third stage samples were obtained from four different biological treatment facilities and the required parameters determined experimentally. The results of stage 1 indicated that in the first 15 years of the landfill the putrescible fraction makes the most significant contribution, after which paper/card becomes the most significant. The second stage found that biodegradability must be reduced by at least 60% to achieve a reduction in overall methane generation. The third stage found that emissions from samples of biologically pretreated BMW would result in a significant reduction in gas emissions over untreated waste, particularly in the early stage of the landfill lifetime; however, low level emissions would continue to occur for the long term.

Characterization of compost-like outputs from mechanical biological treatment of municipal solid waste.

Throughout the world, most municipal solid waste consists of biodegradable components. The most abundant biological component is cellulose, followed by hemicellulose and lignin. Recycling of these components is important for the carbon cycle. In an attempt to reduce the environmental impacts of biodegradable wastes, mechanical biological treatments (MBTs) are being used as a waste management process in many countries. MBT plants attempt to mechanically separate the biodegradable and nonbiodegradable components. The nonbiodegradable components are then sent for reprocessing or landfilled, whereas the biodegradable components are reduced in biological content through composting or anaerobic digestion, leaving a compost-like output (CLO). The further use of these partially degraded residues is uncertain, and in many cases it is likely that they will be landfilled. The implications of this for the future of landfill management are causing some concern because there is little evidence that the long-term emissions tail will be reduced. In this study, the CLOs from four different biological treatment processes were characterized for physical contamination through visual inspection and for biological content using a sequential digestion analysis. The results indicate that the composition of the incoming waste, dependent on the way the waste was collected/segregated, was the factor that influenced biological content most, with length of treatment process the second most important.

Implementation of E.U. Water Framework Directive: source assessment of metallic substances at catchment levels.

The E.U. Water Framework Directive (WFD) aims to prevent deterioration of water quality and to phase out or reduce the concentrations of priority substances at catchment levels. It requires changes in water management from a local scale to a river basin scale, and establishes Environmental Quality Standards (EQS) as a guideline for the chemical status of receiving waters. According to the Directive, the standard and the scope of the investigation for water management are more stringent and expanded than in the past, and this change also needs to be applied to restoring the level of metals in water bodies. The aim of this study was to identify anthropogenic emission sources of metallic substances at catchment levels. Potential sources providing substantial amounts of such substances in receiving waters included stormwater, industrial effluents, treated effluents, agricultural drainage, sediments, mining drainage and landfill leachates. Metallic substances have more emission sources than other dangerous substances at catchment levels. Therefore, source assessment for these substances is required to be considered more significantly to restore their chemical status in the context of the WFD. To improve source assessment quality, research on the role of societal and environmental parameters and contribution of each source to the chemical distribution in receiving waters need to be carried out.

Cadmium levels in Europe: implications for human health.

In this study we used the Forum of European Geological Surveys geochemical baseline data to examine the distribution of cadmium (Cd) in Europe, with a particular reference to the international soil and water guideline values. The highest cadmium levels were found to occur in topsoil and to follow closely the distribution of P(2)O(5), suggesting that the contamination was from the use of rock phosphate fertilizer in intensive arable agriculture. In terms of human health impacts, food (up to several hundred microg/day) was found as the only major route of exposure to Cd for the non-smoking general population. It appeared that low levels of chronic exposure to Cd resulted in completely different human health impacts than those high levels that had caused the 'itai-itai' disease. Some correlations were suggested between cadmium levels and the age-adjusted prostate or breast cancer rates distributed in the European countries under study.

Screening and prioritisation of chemical risks from metal mining operations, identifying exposure media of concern.

Metals have been central to the development of human civilisation from the Bronze Age to modern times, although in the past, metal mining and smelting have been the cause of serious environmental pollution with the potential to harm human health. Despite problems from artisanal mining in some developing countries, modern mining to Western standards now uses the best available mining technology combined with environmental monitoring, mitigation and remediation measures to limit emissions to the environment. This paper develops risk screening and prioritisation methods previously used for contaminated land on military and civilian sites and engineering systems for the analysis and prioritisation of chemical risks from modern metal mining operations. It uses hierarchical holographic modelling and multi-criteria decision making to analyse and prioritise the risks from potentially hazardous inorganic chemical substances released by mining operations. A case study of an active platinum group metals mine in South Africa is used to demonstrate the potential of the method. This risk-based methodology for identifying, filtering and ranking mining-related environmental and human health risks can be used to identify exposure media of greatest concern to inform risk management. It also provides a practical decision-making tool for mine acquisition and helps to communicate risk to all members of mining operation teams.

Removal of steroid estrogens from wastewater using granular activated carbon: comparison between virgin and reactivated carbon.

This research was set up in response to new European legislation to identify cost-effective treatment for removal of steroid estrogens from effluent. This study aimed to compare estrogen removal of two types of granular activated carbon: virgin (F400) and reactivated (C401) carbon. Rapid, small-scale column tests were conducted with a total bed volume of 24.9 cm3 over three columns, and analysis was carried out using high-performance liquid chromatography. Results demonstrated that C401 performed more efficiently with greater than or equal to 81% estrogen removal in wastewater compared to F400 which produced greater than or equal to 65% estrogen removal. Estrogen removal can be affected by competitive adsorption from natural organic matter present in wastewater. In addition, the physical properties of each carbon had the potential to influence adsorption differently, thus resulting in the observed varied adsorption capability of the two carbons.

Spatially Resolved Dissolution and Speciation Changes of ZnO Nanorods during Short-Term in Situ Incubation in a Simulated Wastewater Environment.

Zinc oxide engineered nanomaterials (ZnO ENMs) are used in a variety of applications worldwide due to their optoelectronic and antibacterial properties with potential contaminant risk to the environment following their disposal. One of the main potential pathways for ZnO nanomaterials to reach the environment is via urban wastewater treatment plants. So far there is no technique that can provide spatiotemporal nanoscale information about the rates and mechanisms by which the individual nanoparticles transform. Fundamental knowledge of how the surface chemistry of individual particles change, and the heterogeneity of transformations within the system, will reveal the critical physicochemical properties determining environmental damage and deactivation. We applied a methodology based on spatially resolved in situ X-ray fluorescence microscopy (XFM), allowing observation of real-time dissolution and morphological and chemical evolution of synthetic template-grown ZnO nanorods (∼725 nm length, ∼140 nm diameter). Core-shell ZnO-ZnS nanostructures were formed rapidly within 1 h, and significant amounts of ZnS species were generated, with a corresponding depletion of ZnO after 3 h. Diffuse nanoparticles of ZnS, Zn3(PO4)2, and Zn adsorbed to Fe-oxyhydroxides were also imaged in some nonsterically impeded regions after 3 h. The formation of diffuse nanoparticles was affected by ongoing ZnO dissolution (quantified by inductively coupled plasma mass spectrometry) and the humic acid content in the simulated sludge. Complementary ex situ X-ray absorption spectroscopy and scanning electron microscopy confirmed a significant decrease in the ZnO contribution over time. Application of time-resolved XFM enables predictions about the rates at which ZnO nanomaterials transform during their first stages of the wastewater treatment process.