Breaking NGF-TrkA immunosuppression in melanoma sensitizes immunotherapy for durable memory T cell protection.

Melanoma cells, deriving from neuroectodermal melanocytes, may exploit the nervous system's immune privilege for growth. Here we show that nerve growth factor (NGF) has both melanoma cell intrinsic and extrinsic immunosuppressive functions. Autocrine NGF engages tropomyosin receptor kinase A (TrkA) on melanoma cells to desensitize interferon γ signaling, leading to T and natural killer cell exclusion. In effector T cells that upregulate surface TrkA expression upon T cell receptor activation, paracrine NGF dampens T cell receptor signaling and effector function. Inhibiting NGF, either through genetic modification or with the tropomyosin receptor kinase inhibitor larotrectinib, renders melanomas susceptible to immune checkpoint blockade therapy and fosters long-term immunity by activating memory T cells with low affinity. These results identify the NGF-TrkA axis as an important suppressor of anti-tumor immunity and suggest larotrectinib might be repurposed for immune sensitization. Moreover, by enlisting low-affinity T cells, anti-NGF reduces acquired resistance to immune checkpoint blockade and prevents melanoma recurrence.

Facile Synthesis of Organic-Inorganic Hybrid Heterojunctions of Glycolated Conjugated Polymer-TiO2-X for Efficient Photocatalytic Hydrogen Evolution.

The utilization of the organic-inorganic hybrid photocatalysts for water splitting has gained significant attention due to their ability to combine the advantages of both materials and generate synergistic effects. However, they are still far from practical application due to the limited understanding of the interactions between these two components and the complexity of their preparation process. Herein, a facial approach by combining a glycolated conjugated polymer with a TiO2-X mesoporous sphere to prepare high-efficiency hybrid photocatalysts is presented. The functionalization of conjugated polymers with hydrophilic oligo (ethylene glycol) side chains can not only facilitate the dispersion of conjugated polymers in water but also promote the interaction with TiO2-X forming stable heterojunction nanoparticles. An apparent quantum yield of 53.3% at 365 nm and a hydrogen evolution rate of 35.7 mmol h-1 g-1 is achieved by the photocatalyst in the presence of Pt co-catalyst. Advanced photophysical studies based on femtosecond transient absorption spectroscopy and in situ, XPS analyses reveal the charge transfer mechanism at type II heterojunction interfaces. This work shows the promising prospect of glycolated polymers in the construction of hybrid heterojunctions for photocatalytic hydrogen production and offers a deep understanding of high photocatalytic performance by such heterojunction photocatalysts.

Targeting YAP-mediated HSC death susceptibility and senescence for treatment of liver fibrosis.

BACKGROUND AND AIMS: Liver fibrosis results from the accumulation of myofibroblasts (MFs) derived from quiescent HSCs, and yes-associated protein (YAP) controls this state transition. Although fibrosis is also influenced by HSC death and senescence, whether YAP regulates these processes and whether this could be leveraged to treat liver fibrosis are unknown. APPROACH AND RESULTS: YAP activity was manipulated in MF-HSCs to determine how YAP impacts susceptibility to pro-apoptotic senolytic agents or ferroptosis. Effects of senescence on YAP activity and susceptibility to apoptosis versus ferroptosis were also examined. CCl 4 -treated mice were treated with a ferroptosis inducer or pro-apoptotic senolytic to determine the effects on liver fibrosis. YAP was conditionally disrupted in MFs to determine how YAP activity in MF-HSC affects liver fibrosis in mouse models. Silencing YAP in cultured MF-HSCs induced HSC senescence and vulnerability to senolytics, and promoted ferroptosis resistance. Conversely, inducing HSC senescence suppressed YAP activity, increased sensitivity to senolytics, and decreased sensitivity to ferroptosis. Single-cell analysis of HSCs from fibrotic livers revealed heterogeneous sensitivity to ferroptosis, apoptosis, and senescence. In mice with chronic liver injury, neither the ferroptosis inducer nor senolytic improved fibrosis. However, selectively depleting YAP in MF-HSCs induced senescence and decreased liver injury and fibrosis. CONCLUSION: YAP determines whether MF-HSCs remain activated or become senescent. By regulating this state transition, Yap controls both HSC fibrogenic activity and susceptibility to distinct mechanisms for cell death. MF-HSC-specific YAP depletion induces senescence and protects injured livers from fibrosis. Clarifying determinants of HSC YAP activity may facilitate the development of novel anti-fibrotic therapies.

Facilitating Effects of Reductive Soil Disinfestation on Soil Health and Physiological Properties of Panax ginseng.

Chemical soil fumigation (CSF) and reductive soil disinfestation (RSD) have been proven to be effective agricultural strategies to improve soil quality, restructure microbial communities, and promote plant growth in soil degradation remediation. However, it is still unclear how RSD and CSF ensure soil and plant health by altering fungal communities. Field experiments were conducted to investigate the effects of CSF with chloropicrin, and RSD with animal feces on soil properties, fungal communities and functional composition, and plant physiological characteristics were evaluated. Results showed that RSD and CSF treatment improved soil properties, restructured fungal community composition and structure, enhanced fungal interactions and functions, and facilitated plant growth. There was a significant increase in OM, AN, and AP contents in the soil with both CSF and RSD treatments compared to CK. Meanwhile, compared with CK and CSF, RSD treatment significantly increased biocontrol Chaetomium relative abundance while reducing pathogenic Neonectria relative abundance, indicating that RSD has strong inhibition potential. Furthermore, the microbial network of RSD treatment was more complex and interconnected, and the functions of plant pathogens, and animal pathogen were decreased. Importantly, RSD treatment significantly increased plant SOD, CAT, POD activity, SP, Ca, Zn content, and decreased MDA, ABA, Mg, K, and Fe content. In summary, RSD treatment is more effective than CSF treatment, by stimulating the proliferation of probiotic communities to further enhance soil health and plant disease resistance.

Recent Advances in Organic Photovoltaic Materials Based on Thiazole-Containing Heterocycles.

Organic solar cells (OSCs) have achieved great progress, driven by the rapid development of wide bandgap electron donors and narrow bandgap non-fullerene acceptors (NFAs). Among a large number of electron-accepting (A) building blocks, thiazole (Tz) and its derived fused heterocycles have been widely used to construct photovoltaic materials, especially conjugated polymers. Benefiting from the electron deficiency, rigidity, high planarity, and enhanced intra/intermolecular interactions of Tz-containing heterocycles, some related photovoltaic materials exhibit proper energy levels, optimized molecular aggregation, and active layer morphology, leading to excellent photovoltaic performance. This review focuses on the progress of Tz-based photovoltaic materials in the field of OSCs. First, the Tz-based donor and acceptor photovoltaic materials are reviewed. Then, the materials based on promising Tz-containing heterocycles, mainly including thiazolo[5,4-d]thiazole (TzTz), benzo[1,2-d:4,5-d']bis(thiazole) (BBTz), and benzo[d]thiazole (BTz) are summarized and discussed. In addition, the new emerging Tz-fused structures and their application in OSCs are introduced. Finally, perspectives and outlooks for the further development of Tz-containing heterocycle-based photovoltaic materials are proposed.

First Report of Pantoea agglomerans Causing Leaf Blight on Schisandra chinensis in China.

Schisandra chinensis (Turcz.) Baill is a perennial liana, which is widely cultivated and used in China. In August 2022, Schisandra chinensis leaves with small light brown spots were found on plants growing in Fusong (127°28'E, 42°33'N) of China. There was 15% disease incidence and 50% disease severity of Schisandra chinensis in 2-ha fields of S. chinensis. As the disease progressed, the spots become darker and form round or irregular concentric circles. Leaves with brown spot symptoms were collected from the field. Leaf pieces (5 mm × 5 mm) were excised from lesion margins, surface disinfected with 75% ethanol for 1 min, followed by 1.5% sodium hypochlorite for 3 min, and incubated on Luria Bertani (LB) solid medium at 28°C for 24 hours. Eight cultures were isolated, and representative single colony (XWWZH) was selected from the pure cultures according to colony characteristics for observation The purified colonies were round, yellow, and slimy, cells were straight rod-shaped (0.40 to 0.52 × 1.12 to 1.69 µm) were observed. The isolate was Gram negative. It was positive for methyl red reaction, lysine decarboxylase reaction, gelatin hydrolysis reactionand sucrose utilization. It was negative for indole reaction and produced H2S. The bacterium was preliminarily identified as Pantoea agglomerans based on morphological and biochemical tests (Baird et al. 2007). The 16S rDNA and a portion of rpoB of strain XWWZH were amplified and sequenced. The sequences were submitted to GenBank. (Accession OP763753 and OQ813505, respectively). Phylogenetic trees were constructed based on the 16S rDNA and rpoB gene sequences. The sequences of strain XWWZH clustered with strains P. agglomerans deposited in GenBank. The pathogenicity was verified with non-wounded S. chinensis seedlings by punching holes with sterile needles and injecting a solution of 1 × 108 CFU/ml solution. Sterile ddH2O was injected in the control experiment. The inoculated seedlings were incubated in a greenhouse at 25°C with a relative humidity of 65 to 70%. Five to eight days after inoculation, inoculated leaves, exhibited symptoms which were morphologically identical to those of the originally infected leaves whereas control plants remained asymptomatic. The pathogenicity assays were repeated twice with the same results. The re-isolated pathogen had the same morphology and DNA sequences as the original isolate obtained from the field samples, completing Koch's postulates. Strains of P. agglomerans have been reported to severely infect many plants (Ren et al.2008; Lee et al. 2010; Yang et al. 2011; Guo et al. 2019; Gao et al, 2022), but to the best of our knowledge, this is the first report of a strain of P. agglomerans causing leaf blight on Schisandra chinensis in China. The identification of leaf blight caused by P. agglomerans will enable farmers to prevent and manage it ahead of time to reduce losses.

First Report of Fusarium acuminatum Causing Leaf Spot on Schisandra chinensis in China.

Schisandra chinensis (Turcz.) Baill. is a popular and widely cultivated medicinal herb in China, which has rich nutritional value and medicinal effect. In August 2022, leaves with oval and irregularly circular light brown spots from 2 to 10 mm wide with white centers were found on Schisandra chinensis growing in Fusong district (127°28'E, 42°33'N) of Jilin, China. The symptoms were observed in 20% of the plants of a 2 ha-1 field of Schisandra chinensis. About 50% of the leaf areas were affected. As the disease developed, the lesions grew larger and developed necrotic centers. Leaves with light brown spot symptoms from five plants were collected from the field. Five leaf pieces (3 to 5 mm2) were excised from lesion margins, surface sterilized based on Ju et al. (Ju et al. 2021), and incubated on potato dextrose agar (PDA) at 25°C. Six single spores were isolated from five independently infected isolates for pure culture using the single spore isolation technique (Zhang. 2003). Representative single spore isolate (ZWWZH) was selected from pure cultures for further culture. After 5 days, fluffy white aerial mycelium with pink pigmentation on the underside of the colony were observed on PDA. Mycelia became pinkish-brown as the culture aged. Microscopic observations showed the presence of elongated or pointed, and thick-walled macroconidia (n = 50), predominantly three septate, 3.40 to 7.50 × 40.34 to 61.29 µm were observed. Chlamydospores formed in chains within or on top of the mycelium. The primers ITS1/ITS4 (White et al. 1990) and Bt-2a/Bt-2b (Robideau et al., 2011) were used to amplify the internal transcribed spacer (ITS) rDNA and ß-tubulin (TUB2) region, respectively. The obtained sequences were submitted to GenBank under accession numbers for OQ629789 (ITS) and OQ803521(TUB2). BLASTn analysis of both ITS sequence and TUB2 sequence, revealed 100% and 99.92% sequence identity with F. acuminatum MT566456, MT560377 and KJ396328, respectively. The pathogen was identified as F. acuminatum based on morphological and molecular data. Pathogenicity tests were carried out in the greenhouse. Select five healthy Schisandra chinensis seedlings, each with each healthy leaf surfaces inoculated a 1 × 106 spores/mL solution, 3 wells on one side, 10 µL per well. Sterile ddH2O was used in the control experiment. The inoculated seedlings were incubated at 25°C with a relative humidity of 65 to 70% in a greenhouse. Four days after inoculation, all inoculated leaves exhibited the same symptoms as observed in the field, while the controls showed no symptoms. The experiment was repeated three more times with similar results. The re-isolated fungi from the inoculated plants had the same morphology and DNA sequences as the original isolate (ZWWZH) obtained from the field samples, completing Koch's postulates. To our knowledge, this is the first report of F. acuminatum causing leaf spot on Schisandra chinensis in China. F. acuminatum has seriously affected the quality of Schisandra chinensis production. The identification of leaf spot caused by F. acuminatum will enable farmers to identify practices to minimize disease on this important crop.

Aggregation-Induced Emission by Molecular Design: A Route to High-Performance Light-Emitting Electrochemical Cells.

The emission efficiency of organic semiconductors (OSCs) often suffers from aggregation caused quenching (ACQ). An elegant solution is aggregation-induced emission (AIE), which constitutes the design of the OSC so that its morphology inhibits quenching π-π interactions and non-radiative motional deactivation. The light-emitting electrochemical cell (LEC) can be sustainably fabricated, but its function depends on motion of bulky ions in proximity of the OSC. It is therefore questionable whether the AIE morphology can be retained during LEC operation. Here, we synthesize two structurally similar OSCs, which are distinguished by that 1 features ACQ while 2 delivers AIE. Interestingly, we find that the AIE-LEC significantly outperforms the ACQ-LEC. We rationalize our finding by showing that the AIE morphology remains intact during LEC operation, and that it can feature appropriately sized free-volume voids for facile ion transport and suppressed non-radiative excitonic deactivation.

On the Conformation of Dimeric Acceptors and Their Polymer Solar Cells with Efficiency over 18 .

The determination of molecular conformations of oligomeric acceptors (OAs) and their impact on molecular packing are crucial for understanding the photovoltaic performance of their resulting polymer solar cells (PSCs) but have not been well studied yet. Herein, we synthesized two dimeric acceptor materials, DIBP3F-Se and DIBP3F-S, which bridged two segments of Y6-derivatives by selenophene and thiophene, respectively. Theoretical simulation and experimental 1D and 2D NMR spectroscopic studies prove that both dimers exhibit O-shaped conformations other than S- or U-shaped counter-ones. Notably, this O-shaped conformation is likely governed by a distinctive "conformational lock" mechanism, arising from the intensified intramolecular π-π interactions among their two terminal groups within the dimers. PSCs based on DIBP3F-Se deliver a maximum efficiency of 18.09 %, outperforming DIBP3F-S-based cells (16.11 %) and ranking among the highest efficiencies for OA-based PSCs. This work demonstrates a facile method to obtain OA conformations and highlights the potential of dimeric acceptors for high-performance PSCs.

A Non-Conjugated Polymer Acceptor for Efficient and Thermally Stable All-Polymer Solar Cells.

A non-conjugated polymer acceptor PF1-TS4 was firstly synthesized by embedding a thioalkyl segment in the mainchain, which shows excellent photophysical properties on par with a fully conjugated polymer, with a low optical band gap of 1.58 eV and a high absorption coefficient >105  cm-1 , a high LUMO level of -3.89 eV, and suitable crystallinity. Matched with the polymer donor PM6, the PF1-TS4-based all-PSC achieved a power conversion efficiency (PCE) of 8.63 %, which is ≈45 % higher than that of a device based on the small molecule acceptor counterpart IDIC16. Moreover, the PF1-TS4-based all-PSC has good thermal stability with ≈70 % of its initial PCE retained after being stored at 85 °C for 180 h, while the IDIC16-based device only retained ≈50 % of its initial PCE when stored at 85 °C for only 18 h. Our work provides a new strategy to develop efficient polymer acceptor materials by linkage of conjugated units with non-conjugated thioalkyl segments.

Highly Ordered Organic Ferroelectric DIPAB-Patterned Thin Films.

Ferroelectric molecular compounds present great advantages for application in electronics because they combine high polarization values, comparable to those of inorganic materials, with the flexibility and low-cost properties of organic ones. However, some limitations to their applicability are related to the high crystallinity required to deploy ferroelectricity. In this article, highly ordered ferroelectric patterned thin films of diisopropylammonium bromide have been successfully fabricated by a lithographically controlled wetting technique. Confinement favors the self-organization of ferroelectric crystals, avoiding the formation of polymorphs and promoting the long-range orientation of crystallographic axes. Patterned structures present high stability, and the polarization can be switched to be arranged in stable domain pattern for application in devices.

High Performance All-Polymer Solar Cells by Synergistic Effects of Fine-Tuned Crystallinity and Solvent Annealing.

Growing interests have been devoted to the design of polymer acceptors as potential replacement for fullerene derivatives for high-performance all polymer solar cells (all-PSCs). One key factor that is limiting the efficiency of all-PSCs is the low fill factor (FF) (normally <0.65), which is strongly correlated with the mobility and film morphology of polymer:polymer blends. In this work, we find a facile method to modulate the crystallinity of the well-known naphthalene diimide (NDI) based polymer N2200, by replacing a certain amount of bithiophene (2T) units in the N2200 backbone by single thiophene (T) units and synthesizing a series of random polymers PNDI-Tx, where x is the percentage of the single T. The acceptor PNDI-T10 is properly miscible with the low band gap donor polymer PTB7-Th, and the nanostructured blend promotes efficient exciton dissociation and charge transport. Solvent annealing (SA) enables higher hole and electron mobilities, and further suppresses the bimolecular recombination. As expected, the PTB7-Th:PNDI-T10 solar cells attain a high PCE of 7.6%, which is a 2-fold increase compared to that of PTB7-Th:N2200 solar cells. The FF of 0.71 reaches the highest value among all-PSCs to date. Our work demonstrates a rational design for fine-tuned crystallinity of polymer acceptors, and reveals the high potential of all-PSCs through structure and morphology engineering of semicrystalline polymer:polymer blends.

Photo-degradation in air of the active layer components in a thiophene-quinoxaline copolymer:fullerene solar cell.

We have studied the photo-degradation in air of a blend of [6,6]-phenyl-C61-butyric acid methyl ester (PCBM) and poly[2,3-bis-(3-octyloxyphenyl)quinoxaline-5,8-diyl-alt-thiophene-2,5-diyl] (TQ1), and how the photo-degradation affects the solar cell performance. Using near-edge X-ray absorption fine structure (NEXAFS) spectroscopy, changes to the electronic structure of TQ1 and PCBM caused by illumination in ambient air are investigated and compared between the pristine materials and the blend. The NEXAFS spectra show that the unoccupied molecular orbitals of TQ1 are not significantly changed by the exposure of pristine TQ1 to light in air, whereas those of PCBM are severely affected as a result of photo-induced degradation of PCBM. Furthermore, the photo-degradation of PCBM is accelerated by blending it with TQ1. While the NEXAFS spectrum of TQ1 remains unchanged upon illumination in air, its valence band spectrum shows that the occupied molecular orbitals are weakly affected. Yet, UV-Vis absorption spectra demonstrate photo-bleaching of TQ1, which is attenuated in the presence of PCBM in blend films. Illumination of the active layer of TQ1:PCBM solar cells prior to cathode deposition causes severe losses in electrical performance.

Synthesis and characterization of benzodithiophene and benzotriazole-based polymers for photovoltaic applications.

Two high bandgap benzodithiophene-benzotriazole-based polymers were synthesized via palladium-catalysed Stille coupling reaction. In order to compare the effect of the side chains on the opto-electronic and photovoltaic properties of the resulting polymers, the benzodithiophene monomers were substituted with either octylthienyl (PTzBDT-1) or dihexylthienyl (PTzBDT-2) as side groups, while the benzotriazole unit was maintained unaltered. The optical characterization, both in solution and thin-film, indicated that PTzBDT-1 has a red-shifted optical absorption compared to PTzBDT-2, likely due to a more planar conformation of the polymer backbone promoted by the lower content of alkyl side chains. The different aggregation in the solid state also affects the energetic properties of the polymers, resulting in a lower highest occupied molecular orbital (HOMO) for PTzBDT-1 with respect to PTzBDT-2. However, an unexpected behaviour is observed when the two polymers are used as a donor material, in combination with PC61BM as acceptor, in bulk heterojunction solar cells. Even though PTzBDT-1 showed favourable optical and electrochemical properties, the devices based on this polymer present a power conversion efficiency of 3.3%, considerably lower than the efficiency of 4.7% obtained for the analogous solar cells based on PTzBDT-2. The lower performance is presumably attributed to the limited solubility of the PTzBDT-1 in organic solvents resulting in enhanced aggregation and poor intermixing with the acceptor material in the active layer.

Rational design of D-A1-D-A2 conjugated polymers with superior spectral coverage.

The spectral coverage of a light-harvesting polymer largely determines the maximum achievable photocurrent in organic photovoltaics, and therefore constitutes a crucial parameter for improving their performance. The D-A1-D-A2 copolymer motif is a new and promising design strategy for extending the absorption range by incorporating two acceptor units with complementary photoresponses. The fundamental factors that promote an extended absorption are here determined for three prototype D-A1-D-A2 systems through a combination of experimental and computational methods. Systematic quantum chemical calculations are then used to reveal the intrinsic optical properties of ten further D-A1-D-A2 polymer candidates. These investigated polymers are all predicted to exhibit intense primary absorption peaks at 615-954 nm, corresponding to charge-transfer (CT) transitions to the stronger acceptor, as well as secondary absorption features at 444-647 nm that originate from CT transitions to the weaker acceptors. Realization of D-A1-D-A2 polymers with superior spectral coverage is thereby found to depend critically on the spatial and energetic separation between the two distinct acceptor LUMOs. Two promising D-A1-D-A2 copolymer candidates were finally selected for further theoretical and experimental study, and demonstrate superior light-harvesting properties in terms of significantly extended spectral coverage. This demonstrates great potential for enhanced light-harvesting in D-A1-D-A2 polymers via multiple absorption features compared to traditional D-A polymers.

Light-harvesting capabilities of low band gap donor-acceptor polymers.

A series of nine donor-acceptor polymers, including three new and six polymers from previous work, have been investigated experimentally and theoretically. The investigation focuses on narrow band gaps and strong absorptions of the polymers, where experimentally determined first peak absorption energies range from 1.8 to 2.3 eV, and peak absorption coefficients vary between 19-67 L g(-1) cm(-1). An overall assessment of each polymer's light-harvesting capability is made, and related to the chemical structure. Oligomer calculations using density functional theory are extrapolated to obtain size-converged polymer properties, and found to reproduce the experimental absorption trends well. Accurate theoretical predictions of absorption energies to within 0.06 eV of experiments, and absorption strength to within 12%, are obtained through the introduction of an empirical correction scheme. The computational and experimental results provide insight for the design of polymers with efficient absorption, concerning the intrinsic properties of the constituent units and the use of bulky side-groups.

Effects of reductive soil disinfestation combined with different types of organic materials on the microbial community and functions.

Reductive soil disinfestation (RSD) is an effective method to inhibit soilborne pathogens. However, it remains unclear how RSD combined with different types of organic materials affects the soil ecosystems of perennial plants. Pot experiments were conducted to investigate the effects of RSD incorporated with perilla (PF), alfalfa (MS), ethanol, and acetic acid on soil properties, enzyme activities, microbial communities and functions, and seedling growth. Results showed that RSD-related treatments improved soil properties and enzyme activities, changed microbial community composition and structure, enhanced microbial interactions and functions, and facilitated seedling growth. Compared with CK, RSD-related treatments increased soil pH, available nitrogen, and available potassium contents, sucrase and catalase activities, and decreased soil electric conductivity values. Meanwhile, RSD-related treatment also significantly reduced the relative abundance of Fusarium while increasing the relative abundance of Arthrobacter, Terrabacter, and Gemmatimonas. The reduction was more evident in PF and MS treatment, suggesting the potential for RSD combined with solid agricultural wastes to suppress pathogens. Furthermore, the microbial network of RSD-related treatment was more complex and interconnected, and the functions related to carbon, nitrogen, sulfur, and hydrogen cycling were significantly increased, while the functions of bacterial and fungal plant pathogens were decreased. Importantly, RSD-related treatments also significantly promoted seed germination and seedling growth. In summary, RSD combined with solid agricultural wastes is better than liquid easily degradable compounds by regulating the composition and function of microbial communities to improve soil quality and promote plant growth.IMPORTANCEReductive soil disinfestation (RSD) is an effective agricultural practice. We found that RSD combined with solid agricultural wastes is better than that of liquid easily degradable compounds, may improve soil quality and microbial community structure, inhibit the proliferation of pathogenic bacteria, and contribute to the growth of replanted crops. Thus, RSD combined with solid agricultural wastes is more effective than liquid easily degradable compounds.

Unveiling the Influence of Linkers on Conformations of Oligomeric Acceptors for High-Performance Polymer Solar Cells.

Conformational isomerism of organic photovoltaic materials has a profound impact on their molecular packing and therefore performance of polymer solar cells (PSCs). However, the conformations of oligomeric acceptors (OAs) are mostly predicted by simulations rather than experimental determinations. Herein, the stereochemical S-shaped structure of two dimeric-type acceptor molecules, V-DYIC and V-DYIC-4F, is first confirmed with different end groups (IC for V-DYIC and IC-2F for V-DYIC-4F), incorporating vinylene linkage for connecting the distinct state-of-the-art small molecule acceptor Y-segments. Through the synthetic control of fluorination sites adjacent to the vinyl-linker, S-shaped the conformation by NMR experiments is validated. Compared to the O-shaped dimer, S-shaped conformation results in enhanced lamellar order and reduced nonradiative recombination losses. The optimal acceptor, V-DYIC-4F, achieved a champion efficiency of 18.10% with the lowest energy loss of 0.556 eV in its devices paired with PM6 due to their efficient carrier transport, and suppressed recombination compared to other devices, being attributed to the synergistic effect of conformation and end group fluorination. The insights gained in this work contribute valuable knowledge of both synthetic control and structural determination of OAs, providing strategic design guidelines for the future development of dimeric acceptors toward high-efficiency PSCs.

Facilitating effects of plant extracts on soil health and replanted Panax ginseng growth in recession soil.

BACKGROUND: Plant extracts have been shown to be effective agricultural strategies for improving soil fertility and quality, and promoting plant growth in soil degradation remediation. The application of plant extracts improves the material cycle of soil microecology, such as the decomposition of nitrogen, phosphorus, and potassium, while increasing plant resistance. However, there is currently no experiment to demonstrate whether plant extracts have a promoting effect on the growth of ginseng and the mechanism of action. OBJECTIVES AND METHODS: Pot experiments were carried out to investigate the effects of extracts, namely Rubia cordifolia (RC), Schisandra chinensis (SC), and Euphorbia humifusa (EH) on soil properties, enzyme activities, and plant physiological characteristics were evaluated. RESULTS: Results showed that compared with CK, plant extract-related treatments increased soil Organic carbon (OC), Available nitrogen (AN), Available phosphorus (AP) contents, and Soil urease activity. (S-UE), Soil sucrase activity (Soil sucrase), Soil acid phosphatase activity. (S-ACP). Meanwhile, plant extract-related treatments significantly increased plant physiological properties and TP (Total protein) content, and decreased the content of MDA (malondialdehyde) by 15.70% -36.59% and PRO (proline) by 30.13% -148.44%. Furthermore, plant extract-related treatments also significantly promote plant growth and reduce plant incidence, the fresh weight of ginseng increased by 27.80% -52.08%, ginseng root activity increased by 45.13% -90.07%, and ginseng incidence rate decreased by 20.00% -46.67%. Through correlation analysis between fresh weight of ginseng and root parameters and soil index, fresh weight is significantly positively correlated with root diameter, fiber root number, root activity, total protein (TP), catalytic activity (CAT) and superoxide dismutase activity (SOD), H, soil urea activity (S-UE), soil sucrose activity (S-SC), soil acid phosphate activity (S-ACP), and soil laccase activity (SL); The fresh weight was significantly negatively correlated with incidence rate, disease severity index, and malondialdehyde content (MDA). CONCLUSION: In summary, plant extract-related treatments improve soil quality and promote ginseng growth, further enhancing soil health and plant disease resistance. These findings provide new insights into ginseng cultivation and soil health management and highlight a new approach that can be applied to a wider range of agricultural practices and environmental sustainability.

Branched-Chain Amino Acid Accumulation Fuels the Senescence-Associated Secretory Phenotype.

The essential branched-chain amino acids (BCAAs) leucine, isoleucine, and valine play critical roles in protein synthesis and energy metabolism. Despite their widespread use as nutritional supplements, BCAAs' full effects on mammalian physiology remain uncertain due to the complexities of BCAA metabolic regulation. Here a novel mechanism linking intrinsic alterations in BCAA metabolism is identified to cellular senescence and the senescence-associated secretory phenotype (SASP), both of which contribute to organismal aging and inflammation-related diseases. Altered BCAA metabolism driving the SASP is mediated by robust activation of the BCAA transporters Solute Carrier Family 6 Members 14 and 15 as well as downregulation of the catabolic enzyme BCAA transaminase 1 during onset of cellular senescence, leading to highly elevated intracellular BCAA levels in senescent cells. This, in turn, activates the mammalian target of rapamycin complex 1 (mTORC1) to establish the full SASP program. Transgenic Drosophila models further indicate that orthologous BCAA regulators are involved in the induction of cellular senescence and age-related phenotypes in flies, suggesting evolutionary conservation of this metabolic pathway during aging. Finally, experimentally blocking BCAA accumulation attenuates the inflammatory response in a mouse senescence model, highlighting the therapeutic potential of modulating BCAA metabolism for the treatment of age-related and inflammatory diseases.