ABSTRACT
Organic molecules have been regarded as ideal candidates for near-infrared (NIR) optoelectronic active materials due to their customizability and ease of large-scale production. However, constrained by the intricate molecular design and severe energy gap law, the realization of optoelectronic devices in the second near-infrared (NIR (II)) region with required narrow band gaps presents more challenges. Herein, we have originally proposed a cocrystal strategy that utilizes intermolecular charge-transfer interaction to drive the redshift of absorption and emission spectra of a series BFXTQ (X = 0, 1, 2, 4) cocrystals, resulting in the spectra located at NIR (II) window and reducing the optical bandgap to â¼0.98 eV. Significantly, these BFXTQ-based optoelectronic devices can exhibit dual-mode optoelectronic characteristics. An investigation of a series of BFXTQ-based photodetectors exhibits detectivity (D*) surpassing 1013 Jones at 375 to 1064 nm with a maximum of 1.76 × 1014 Jones at 1064 nm. Moreover, the radiative transition of CT excitons within the cocrystals triggers NIR emission over 1000 nm with a photoluminescence quantum yield (PLQY) of â¼4.6% as well as optical waveguide behavior with a low optical-loss coefficient of 0.0097 dB/µm at 950 nm. These results promote the advancement of an emerging cocrystal approach in micro/nanoscale NIR multifunctional optoelectronics.
ABSTRACT
Multicolor luminescence of organic fluorescent materials is an essential part of lighting and optical communication. However, the conventional construction of a multicolor luminescence system based on integrating multiple organic fluorescent materials of a single emission band remains complicated and to be improved. Herein, organic alloys (OAs) capable of full-color emission are synthesized based on charge transfer (CT) cocrystals. By adjusting the molar ratio of electron donors, the emission color of the OAs can be conveniently and continuously regulated in a wide visible range from blue (CIE: 0.187, 0.277), to green (CIE: 0.301, 0.550), and to red (CIE: 0.561, 0.435). The OAs show analogous 1D morphology with smooth surface, allowing for full-color waveguides with low optical-loss coefficient. Impressively, full-color optical displays are easily achieved through the OAs system with continuous emission, which shows promising applications in the field of optical display and promotes the development of organic photonics.
ABSTRACT
Organic luminescent materials are indispensable in optoelectronic displays and solid-state luminescence applications. Compared with single-component, multi-component crystalline materials can improve optoelectronic characteristics. This work forms a series of full-spectrum tunable luminescent charge-transfer (CT) cocrystals ranging from 400 to 800 nm through intermolecular collaborative self-assembly. What is even more interesting is that o-TCP-Cor(x)-Pe(1-x), p-TCP-Cor(x)-Pe(1-x), and o-TCP-AN(x)-TP(1-x) alloys are prepared based on cocrystals by doping strategies, which correspondingly achieve the stepless color change from blue (CIE [0.22, 0.44]) to green (CIE [0.16, 0.14]), from green (CIE [0.27, 0.56]) to orange (CIE [0.58, 0.42]), from yellow (CIE [0.40, 0.57]) to red (CIE [0.65, 0.35]). The work provides an efficient method for precisely synthesizing new luminescent organic semiconductor materials and lays a solid foundation for developing advanced organic solid-state displays.
ABSTRACT
In past decades, organic crystals have presented considerable potential in the field of optoelectronics due to their rich tunable physical and chemical properties and excellent optoelectronic characteristics. White-light emission, as a special application, has received widespread attention and has been applied in various fields, generating significant interest in the scientific community. By preparing white light-emitting organic crystals, a series of applications for future white-light sources can be realized. This article reviews the research progress on the molecular design and synthesis, preparation, and application of white light-emitting organic crystals in recent years. We hope that this review will help to understand and facilitate the development of white light-emitting organic crystals.
Subject(s)
LightABSTRACT
Organic heterostructures (OHs) with multi-segments exhibit special optoelectronic properties compared with monomeric structures. Nevertheless, the synthesis of multi-block heterostructures remains challenging due to compatibility issues between segment parts, which restricts their application in optical waveguides and integrated optics. Herein, we demonstrate programmable in-situ co-assembly engineering, combining multi-step spontaneous self-assembly processes to promote the synthesis of multi-block heterostructures with a rational arrangement of three or more segments. The rational design of segments enables exciton manipulation and ensures optical waveguides and proper output among the multi-segment OHs. This work enables the controllable growth of segments within multi-block OHs, providing a pathway to construct complex OHs for the rational development of future optical applications.
ABSTRACT
Organic hierarchical branch micro/nanostructures constituted by single crystals with inherent multichannel characteristics exhibit superior potential in regulating photon transmission for photonic circuits. However, organic branch micro/nanostructures with precise branch positions are extremely difficult to achieve due to the randomness of the nucleation process. Herein, by taking advantage of the dislocation stress field-impurity interaction that solute molecules deposit preferentially along the dislocation line, twinning deformation was introduced into microcrystals to induce oriented nucleation sites, and ultimately organic branch microstructures with controllable branch sites were fabricated. The growth mechanism of these controllable single crystals with an angle of 140° between trunk and branch is attributed to the low lattice mismatching ratio (η) of 4.8%. These as-prepared hierarchical branch single crystals with asymmetrical optical waveguide characteristics have been demonstrated as an optical logic gate with multiple input/out channels, which provides a route to command the nucleation sites and offers potential applications in the organic optoelectronics at the micro/nanoscale.
ABSTRACT
OBJECTIVE: The temporomandibular joint (TMJ) disc cushions intraarticular stress during mandibular movements. While mechanical overloading is related to cartilage degeneration, the pathogenesis of TMJ disc degeneration is unclear. Here, we determined the regulatory role of mechanoinductive transient receptor potential vanilloid 4 (TRPV4) in mechanical overload-induced TMJ disc degeneration. METHODS: We explored the effect of mechanical overload on the TMJ discs in a rat occlusal interference model in vivo, and by applying sustained compressive force in vitro. TRPV4 inhibition was delivered by small interfering RNA or GSK2193874; TRPV4 activation was delivered by GSK1016790A. The protective effect of TRPV4 inhibition was validated in the rat occlusal interference model. RESULTS: Occlusal interference induced TMJ disc degeneration with enhanced extracellular matrix degradation in vivo and mechanical overload promoted inflammatory responses in the TMJ disc cells via Ca2+ influx with significantly upregulated TRPV4. TRPV4 inhibition reversed mechanical overload-induced inflammatory responses; TRPV4 activation simulated mechanical overload-induced inflammatory responses. Moreover, TRPV4 inhibition alleviated TMJ disc degeneration in the rat occlusal interference model. CONCLUSION: Our findings suggest TRPV4 plays a pivotal role in the pathogenesis of mechanical overload-induced TMJ disc degeneration and may be a promising target for the treatment of degenerative changes of the TMJ disc.
ABSTRACT
Lipid metabolism is a complex physiological process, which is closely related to nutrient regulation, hormone balance and endocrine function. It involves the interactions of multiple factors and signal transduction pathways. Lipid metabolism disorder is one of the main mechanisms to induce a variety of diseases, such as obesity, diabetes, non-alcoholic fatty liver disease, hepatitis, hepatocellular carcinoma and their complications. At present, more and more studies have found that the "dynamic modification" of N6-adenylate methylation (m6A) on RNA represents a new "post-transcriptional" regulation mode. m6A methylation modification can occur in mRNA, tRNA, ncRNA, etc. Its abnormal modification can regulate gene expression changes and alternative splicing events. Many latest references have reported that m6A RNA modification is involved in the epigenetic regulation of lipid metabolism disorder. Based on the major diseases induced by lipid metabolism disorders, we reviewed the regulatory roles of m6A modification in the occurrence and development of those diseases. These overall findings inform further in-depth investigations of the underlying molecular mechanisms regarding the pathogenesis of lipid metabolism disorders from the perspective of epigenetics, and provide reference for health prevention, molecular diagnosis and treatment of related diseases.
Subject(s)
Lipid Metabolism Disorders , Liver Neoplasms , Humans , Methylation , Epigenesis, Genetic , Lipid Metabolism/genetics , Lipid Metabolism Disorders/genetics , RNAABSTRACT
The combination of multiple components or structures into integrated micro/nanostructures for practical application has been pursued for many years. Herein, a series of hierarchical organic microwires with branch, core/shell (C/S), and branch C/S structures are successfully constructed based on organic charge transfer (CT) cocrystals with structural similarity and physicochemical tunability. By regulating the intermolecular CT interaction, single microwires and branch microstructures can be integrated into the C/S and branch C/S structures, respectively. Significantly, the integrated branch C/S microwires, with multicolor waveguide behavior and branch structure multichannel waveguide output characteristics, can function as an optical logic gate with multiple encoding features. This work provides useful insights for creating completely new types of organic microstructures for integrated optoelectronics.
ABSTRACT
Low-dimensional organic crystals (LOCs) have attracted increasing attention recently for their potential applications in miniaturized optoelectronics and integrated photonics. Such applications are possible owing to their tunable physicochemical properties and excellent charge/photon transport features. As a result, the precise synthesis of LOCs has been examined in terms of morphology modulation, large-area pattern arrays, and complex architectures, and this has led to a series of appealing structure-dependent properties for future optoelectronic applications. This review summarizes the recent advances in the precise synthesis of LOCs in addition to discussing their structure-property relationships in the context of optoelectronic applications. It also presents the current challenges related to organic crystals with specific structures and desired performances, and the outlook regarding their use in next-generation integrated optoelectronic applications.
Subject(s)
Optics and PhotonicsABSTRACT
Pot and field trials were conducted to investigate Cd uptake and phytoremediation efficiency of two Brassica napus cultivars (QY-1 and SYH) with applied water-soluble chitosan (WSC, Pot: 0, 2% and 4%; Field: 0 and 10 g·m-2) grown in Cd-contaminated soils. The results from the pot and field trials generally showed that WSC treatments significantly increased Cd concentrations in shoot and root tissues by 33.77-159.71% (except for SYH/JY) and 7.42-168.71% of two B. napus cultivars compared with the control (p < 0.05). The uptake of Cd by shoots of SYH was obviously higher than by shoots of QY-1 treated with WSC under pot and field conditions, which was 1.54-2.22 times than that of QY-1 (p < 0.05). The results indicated that 2% WSC treatment significantly increased the water-soluble and acid extractable Cd in rhizosphere soils of both B. napus cultivars. Furthermore, Cd concentrations in the oils of two B. napus cultivars with applied WSC (10 g·m-2) grown under field conditions were not significantly different from commercial rapeseed oils. Rapeseed oil of B. napus is not only an edible oil with high nutritional value, but it can also be converted into biomass diesel that can be used as a substitute for petroleum diesel.
Subject(s)
Brassica napus , Chitosan , Soil Pollutants , Cadmium/analysis , Biodegradation, Environmental , Soil Pollutants/analysis , Farms , Water , Soil , OilsABSTRACT
In order to discover pesticidal lead compounds with high activity and low toxicity, a series of novel benzamides substituted with pyrazole-linked 1,2,4-oxadiazole were designed via bioisosterism. The chemical structures of the target compounds were confirmed via 1H NMR, 13C NMR and HRMS analysis. The preliminary bioassay showed that most compounds exhibited good lethal activities against Mythimna separate, Helicoverpa armigera, Ostrinia nubilalis and Spodoptera frugiperda at 500 mg/L. Particularly in the case of Mythimna separate, compound 14q (70%) exhibited obvious insecticidal activity. In addition, compound 14h demonstrated good fungicidal activity against Pyricularia oryae with an inhibition rate of 77.8%, and compounds 14e, 14k, 14n and 14r also showed certain antifungal activities (55.6-66.7%). The zebrafish toxicity test showed that the LC50 of compound 14h was 14.01 mg/L, which indicated that it may be used as a potential leading compound for further structural optimization.
Subject(s)
Insecticides , Moths , Animals , Benzamides , Drug Design , Insecticides/toxicity , Molecular Structure , Oxadiazoles/chemistry , Oxadiazoles/toxicity , Pyrazoles/toxicity , Structure-Activity Relationship , ZebrafishABSTRACT
The rapid development of information technology has resulted in a growing demand for low-dimensional photonic materials. Organic semiconductor materials play an important role in various photonic devices due to their adjustable physicochemical properties, while individual organic crystals do not exhibit the desired performance due to the limitations of their simple structure. Branched organic crystals with inherent multichannel characteristics based on π-conjugated molecules are favorable components in optoelectronics. However, the preparation of branched organic crystals still faces great challenges before they can be applied in integrated optoelectronic devices. In this Review, the development and representative examples of branched organic crystals in terms of molecular design, synthesis, and advanced applications are discussed. We also provide a summary and outlook for the direction of future research on branched organic crystals as excellent candidates in photonic integrated circuits.
ABSTRACT
Organic molecules which can undergo excited-state intramolecular proton transfer (ESIPT) process have been considered as ideal gain materials for near-infrared organic lasers owing to their effective four-level systems. However, extending lasing wavelength beyond 800â nm with present ESIPT-active gain materials is still in challenge. Herein, we established a molecular design strategy that operates via extending the π-conjugated system of the ESIPT parent core to enhance the cascaded double ESIPT process and thus to achieve the red-shifted six-level system lasing. Concretely, a model molecule with 1,9-dihydroxyanthracene as the ESIPT parent core was designed and synthesized, which was proved to undergo twice cascaded ESIPT processes while the 1,8-dihydroxynaphthalene-based analogue can only undergo once ESIPT process based on DFT calculations and ultrafast dynamics analyses. Finally, a six-level system lasing toward 900â nm was achieved with a low threshold of 27.4â µJ cm-2 .
ABSTRACT
Optical interconnects exhibit superior potential in the precise regulation of photon transmission for organic photonic circuits. However, the rational design of well-defined organic heterostructures toward active optoelectronics remains challenging. Herein, we designed organic branched heterostructures (OBHs) with accurate spatial organization for optical interconnection. Notably, the precise regulation of OBHs has been controllably achieved including the trunk morphologies and the branched microwire number. Significantly, these as-prepared OBHs inherently exhibit the multichannel coupling outputs and the excitation position-dependent waveguide characteristics, leading to various outcoupling signals with tunable intensity and emission colors. The optical interconnects are realized due to the occurrence of exciton conversion and photon propagation between branch and trunk at the heterojunction, benefiting the application possibilities of two-dimensional (2D) optical barcodes.
ABSTRACT
Near-infrared (NIR) organic solid-state lasers play an essential role in applications ranging from laser communication to infrared night vision, but progress in this area is restricted by the lack of effective excited-state gain processes. Herein, we originally proposed and demonstrated the cascaded occurrence of excited-state intramolecular proton transfer for constructing the completely new energy-level systems. Cascading by the first ultrafast proton transfer of <430â fs and the subsequent irreversible second proton transfer of ca. 1.6â ps, the stepwise proton transfer process favors the true six-level photophysical cycle, which supports efficient population inversion and thus NIR single-mode lasing at 854â nm. This work realizes longest wavelength beyond 850â nm of organic single-crystal lasing to date and originally exploits the cascaded excited-state molecular proton transfer energy-level systems for organic solid-state lasers.
ABSTRACT
Organic microcrystals are of essential importance for high fluorescence efficiency, ordered molecular packing mode, minimized defects, and smooth shapes, which are extensively applied in organic optoelectronics. The molecular packing mode significantly influences the optical/electrical properties of organic microcrystals, which makes the controllable preparation of organic microcrystals with desired molecular packing mode extremely important. In the study, yellow-emissive α phase organic microcrystals with rectangular morphology and green-emissive ß phase perylene microcrystals with rhombic morphology are separately prepared by simply controlling the solution concentration. The distinct molecular staking modes of the H/J-aggregate are found in these two types of perylene microcrystals, which contribute to the different emission color, morphology, and radiative decay rate. What is more interesting, the α-doped ß phase and the ß-doped α phase organic microcrystals can also be fabricated by modulating the evaporation rate from 100 to 10 µL min-1 . The findings can contribute to the future development of organic optoelectronics at the microscale.
ABSTRACT
During the pathogenesis of early atherosclerosis, lipid-loaded macrophages are involved in plaque development and progression. As a novel adipokine, C1q/tumor necrosis factor-related protein-9 (CTRP9) has beneficial effects in cardiovascular disease. However, previous reports have not studied whether the formation of macrophage foam cell induced by oxidized low-density lipoprotein (ox-LDL) is affected by CTRP9. According to our study, in ox-LDL-induced THP-1 macrophages, CTRP9 could reduce the quantity of lipid droplets, lower the level of cholesteryl ester (CE), promote cholesterol efflux, as well as increase the expression level of the cholesterol transport receptors ATP-binding membrane cassette transporter A1 (ABCA1) and G1 (ABCG1). In addition, the protein of LC3 II is elevated and that of p62 is decreased in CTRP9-treated foam cells by enhancing autophagy. However, using 3-methyladenine (3-MA) abolished the role of CTRP9 by inhibiting autophagy. Mechanistically, the autophagy-promoting effects of CTRP9 on foam cells was reversed by an AMPK inhibitor, Compound C, which inhibited the signaling pathway of adenosine 5'-monophosphate (AMP)-activated protein kinase (AMPK)/mammalian target of rapamycin (mTOR). These results show that CTRP9 protects against atherosclerosis by promoting cholesterol efflux to reduce the formation of foam cell in virtue of inducing autophagy in an AMPK/mTOR signaling pathway-dependent manner.
Subject(s)
Adiponectin/pharmacology , Autophagy/drug effects , Cholesterol/metabolism , Glycoproteins/pharmacology , AMP-Activated Protein Kinases/metabolism , ATP Binding Cassette Transporter 1/metabolism , ATP Binding Cassette Transporter, Subfamily G, Member 1/metabolism , Cholesterol Esters/metabolism , Foam Cells/metabolism , Foam Cells/pathology , Humans , Lipid Droplets/drug effects , Lipid Droplets/metabolism , Lipoproteins, LDL/pharmacology , Microtubule-Associated Proteins/metabolism , Recombinant Proteins/pharmacology , Sequestosome-1 Protein/metabolism , Signal Transduction/drug effects , THP-1 Cells , TOR Serine-Threonine Kinases/metabolism , Tumor Necrosis Factor Receptor-Associated Peptides and ProteinsABSTRACT
OBJECTIVES: Temporomandibular joint osteoarthritis (TMJOA) is approximately twice as prevalent in women than in men. Synoviocytes are believed to play a critical role in joint inflammation. However, it is unknown whether synoviocytes from different genders possess sexual dimorphisms that contribute to female-predominant TMJOA. MATERIALS AND METHODS: Freund's complete adjuvant combined with monosodium iodoacetate was used to induce TMJOA in female and male rats. Histologic and radiographic features were used to evaluate TMJOA. The expression of CD68, MCP-1, iNOS, and IL-1ß was detected by immunohistochemistry and real-time PCR. Primary fibroblast-like synoviocytes (FLSs) isolated from the synovial membrane of female and male rats were used for in vitro experiments. RESULTS: Female rats showed aggravated TMJOA features as compared to male rats. Increased expression of iNOS and IL-1ß was detected in synovial membrane from female TMJOA rats as compared to male rats. Furthermore, greater amounts of CD68-positive macrophage infiltration and increased MCP-1 expression around the synovial membrane were detected in female TMJOA rats compared to males. Primary cultured FLSs from female rats showed higher sensitivity to TNF-α treatment and recruited increased macrophage migration than male FLSs. More important, ovariectomy (OVX) by ablation in female rats repressed the sensitivity of female FLSs to TNF-α treatment due to the loss of estrogen production. Blockage of the estrogen receptor repressed estrogen-potentiated TNF-α-induced pro-inflammatory cytokine expression in OVX-FLSs. Moreover, the injection of estrogen receptor antagonists relieved the cartilage destruction and bone deterioration of TMJOA in female rats. CONCLUSION: Estrogen-sensitized synoviocytes in female rats may contribute to gender differences in the incidence and progression of TMJOA.
Subject(s)
Estrogens , Osteoarthritis/metabolism , Synoviocytes/metabolism , Temporomandibular Joint Disorders/metabolism , Animals , Antigens, CD/metabolism , Antigens, Differentiation, Myelomonocytic/metabolism , Cell Movement/drug effects , Cells, Cultured , Chemokine CCL2/metabolism , Estrogen Receptor Antagonists/pharmacology , Estrogens/metabolism , Estrogens/pharmacology , Female , Interleukin-1beta/metabolism , Macrophages/metabolism , Macrophages/physiology , Male , Nitric Oxide Synthase Type II/metabolism , Osteoarthritis/pathology , Ovariectomy , Rats , Rats, Sprague-Dawley , Receptors, Estrogen/antagonists & inhibitors , Sex Factors , Synovial Membrane/metabolism , Synoviocytes/drug effects , Tumor Necrosis Factor-alpha/pharmacologyABSTRACT
BACKGROUND: Augmented reality (AR) technology is used to reconstruct three-dimensional (3D) images of hepatic and biliary structures from computed tomography and magnetic resonance imaging data, and to superimpose the virtual images onto a view of the surgical field. In liver surgery, these superimposed virtual images help the surgeon to visualize intrahepatic structures and therefore, to operate precisely and to improve clinical outcomes. DATA SOURCES: The keywords "augmented reality", "liver", "laparoscopic" and "hepatectomy" were used for searching publications in the PubMed database. The primary source of literatures was from peer-reviewed journals up to December 2016. Additional articles were identified by manual search of references found in the key articles. RESULTS: In general, AR technology mainly includes 3D reconstruction, display, registration as well as tracking techniques and has recently been adopted gradually for liver surgeries including laparoscopy and laparotomy with video-based AR assisted laparoscopic resection as the main technical application. By applying AR technology, blood vessels and tumor structures in the liver can be displayed during surgery, which permits precise navigation during complex surgical procedures. Liver transformation and registration errors during surgery were the main factors that limit the application of AR technology. CONCLUSIONS: With recent advances, AR technologies have the potential to improve hepatobiliary surgical procedures. However, additional clinical studies will be required to evaluate AR as a tool for reducing postoperative morbidity and mortality and for the improvement of long-term clinical outcomes. Future research is needed in the fusion of multiple imaging modalities, improving biomechanical liver modeling, and enhancing image data processing and tracking technologies to increase the accuracy of current AR methods.