Fragment-based approach to study fungicide-biomimetic membrane interactions.

In this study, the molecular interactions of the allylamine-type fungicide butenafine and a set of substructures ("fragments") with liposomes mimicking biological membranes were studied to gain a better understanding of the structural factors governing membrane affinity and perturbation. Specifically, drug/fragment-membrane interactions were investigated using an interdisciplinary approach involving micro differential scanning calorimetry, open-tubular capillary electrochromatography, nanoplasmonic sensing, and quartz crystal microbalance. By incubating the drug and the fragment compounds with liposomes with varying lipid composition or by externally adding the compounds to preformed liposomes, a detailed mechanistic picture on the underlying drug/fragment-membrane interactions was obtained. The nature and the degree of ionisation of polar head groups of the lipids had a major influence on the nature of drug-membrane interactions, and so had the presence and relative concentration of cholesterol within the membranes. The in-depth understanding of drug/fragment-membranes interactions established by the presented interdisciplinary fragment-based approach may be useful in guiding the design and early-stage evaluation of prospective antifungal drug candidates, and the discovery of agents with improved membrane penetrating characteristics in general.

Structural Characterization of 6-Halo-6-Deoxycelluloses by Direct-Dissolution Solution-State NMR Spectroscopy.

Regioselective modifications of cellulose using activated cellulose derivatives such as 6-halo-6-deoxycelluloses provide a convenient approach for developing sustainable products with properties tailored to specific applications. However, maintaining precise regiochemical control of substituent distribution in 6-halo-6-deoxycelluloses is challenging due to their insolubility in most common solvents and the resulting difficulties in precise structure elucidation by modern instrumental analytical techniques. Herein, an accessible NMR-based approach toward detailed characterization of 6-halo-6-deoxycelluloses, including the determination of the degrees of substitution at carbon 6 (DS6), is presented. It is shown that the direct-dissolution cellulose solvent, tetrabutylphosphonium acetate:DMSO-d6, converts 6-halo-6-deoxycelluloses to 6-monoacetylcellulose, enabling in situ solution-state NMR measurements. A range of 1D and 2D NMR experiments is used to demonstrate the quantitivity of the conversion and provide optimum dissolution conditions. In comparison with other NMR-based derivatization protocols for elucidating the structure of 6-halo-6-deoxycelluloses, the presented approach offers major advantages in terms of accuracy, speed, and simplicity of analysis, and minimal requirements for reagents or NMR instrumentation.

Effect of liposome composition on ß-blocker interactions studied by capillary electrokinetic chromatography.

Liposome capillary electrokinetic chromatography was used to investigate the interactions between three ß-blockers of different hydrophobicity and various liposome solutions. The studied ß-blockers comprised alprenolol, propranolol, and carvedilol. The composition of the liposome solutions, containing 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphocholine, 1,2-dioleoyl-sn-glycero-3-phos-phoethanolamine, 1-palmitoyl-2-oleoyl-sn-glycero-3-phospho-l-serine, and cholesterol in various molar ratios, was designed by a response surface methodology-central composite design approach. Subsequently, after conducting the liposome capillary electrokinetic chromatography experiments and determining the retention factors from the electrophoretic mobilities of the compounds, and further calculating the distribution coefficients, an analysis of variance was performed. After extracting the statistical models, optimal operational conditions were obtained based on the developed models. To further investigate the interactions between the ß-blockers and the liposomes, nanoplasmonic sensing experiments were carried out on two different liposome systems. The overall results demonstrate the strong influence of cholesterol and 1-palmitoyl-2-oleoyl-sn-glycero-3-phospho-l-serine on the distribution coefficients.

CE and asymmetrical flow-field flow fractionation studies of polymer interactions with surfaces and solutes reveal conformation changes of polymers.

Amphiphilic diblock copolymers consisting of a hydrophobic core containing a polymerized ionic liquid and an outer shell composed of poly(N-isoprolylacrylamide) were investigated by capillary electrophoresis and asymmetrical flow-field flow fractionation. The polymerized ionic liquid comprised poly(2-(1-butylimidazolium-3-yl)ethyl methacrylate tetrafluoroborate) with a constant block length (n = 24), while the length of the poly(N-isoprolylacrylamide) block varied (n = 14; 26; 59; 88). Possible adsorption of the block copolymer on the fused silica capillary, due to alterations in the polymeric conformation upon a change in the temperature (25 and 45 °C), was initially studied. For comparison, the effect of temperature on the copolymer conformation/hydrodynamic size was determined with the aid of asymmetrical flow-field flow fractionation and light scattering. To get more information about the hydrophilic/hydrophobic properties of the synthesized block copolymers, they were used as a pseudostationary phase in electrokinetic chromatography for the separation of some model compounds, that is, benzoates and steroids. Of particular interest was to find out whether a change in the length or concentration of the poly(N-isoprolylacrylamide) block would affect the separation of the model compounds. Overall, our results show that capillary electrophoresis and asymmetrical flow-field flow fractionation are suitable methods for characterizing conformational changes of such diblock copolymers.

Assessing the Interactions of Auristatin Derivatives with Mixed Phospholipid-Sodium Dodecyl Sulfate Aggregate Dispersions.

The aim of this study was to assess what properties of the pseudostationary phases in electrokinetic capillary chromatography affect the interactions between monomethyl auristatin E (MMAE) and hydrophilically modified structural analogues thereof with various lipophilic phases. MMAE is a widely used cytotoxic agent in antibody-drug conjugates (ADC), which are used as selective biopharmaceutical drugs in the treatment of cancers. MMAE and its derivatives are highly lipophilic, yet they fail to interact with biomimicking phosphatidylcholine-phosphatidylserine liposomes. To reveal what properties affect the interaction of the auristatin derivatives with cell plasma membrane-mimicking vesicles, capillary electrokinetic chromatography was used with four different types of micellar and vesicular pseudostationary phases: pure vesicles, mixed vesicles, mixed micelles, and pure micelles. Vesicular phases were composed of pure phospholipids [dimyristoylphosphatidylcholine (DMPC) and dilauroylphosphatidylcholine (DLPC)] and phospholipid-surfactant mixtures [sodium dodecyl sulfate, (SDS) with DMPC and DLPC] while the micellar phases comprised pure surfactant (SDS) and surfactant-phospholipid mixtures (SDS-DMPC and SDS-DLPC). In addition, differential scanning calorimetry and dynamic light scattering were used to monitor the aggregate composition. Our data shows that the interaction between hydrophobic auristatin derivatives and hydrophobic pseudostationary phases critically depends on the type, size, and hydrogen bonding capability of the pseudostationary phases.

Immobilization of proteolytic enzymes on replica-molded thiol-ene micropillar reactors via thiol-gold interaction.

We introduce rapid replica molding of ordered, high-aspect-ratio, thiol-ene micropillar arrays for implementation of microfluidic immobilized enzyme reactors (IMERs). By exploiting the abundance of free surface thiols of off-stoichiometric thiol-ene compositions, we were able to functionalize the native thiol-ene micropillars with gold nanoparticles (GNPs) and these with proteolytic α-chymotrypsin (CHT) via thiol-gold interaction. The micropillar arrays were replicated via PDMS soft lithography, which facilitated thiol-ene curing without the photoinitiators, and thus straightforward bonding and good control over the surface chemistry (number of free surface thiols). The specificity of thiol-gold interaction was demonstrated over allyl-rich thiol-ene surfaces and the robustness of the CHT-IMERs at different flow rates and reaction temperatures using bradykinin hydrolysis as the model reaction. The product conversion rate was shown to increase as a function of decreasing flow rate (increasing residence time) and upon heating of the IMER to physiological temperature. Owing to the effective enzyme immobilization onto the micropillar array by GNPs, no further purification of the reaction solution was required prior to mass spectrometric detection of the bradykinin hydrolysis products and no clogging problems, commonly associated with conventional capillary packings, were observed. The activity of the IMER remained stable for at least 1.5 h (continuous use), suggesting that the developed protocol may provide a robust, new approach to implementation of IMER technology for proteomics research. Graphical abstract.

Correlation between Ionic Liquid Cytotoxicity and Liposome-Ionic Liquid Interactions.

This study aims at extending the understanding of the toxicity mechanism of ionic liquids (ILs) using various analytical methods and cytotoxicity assays. The cytotoxicity of eight ILs and one zwitterionic compound was determined using mammalian and bacterial cells. The time dependency of the IL toxicity was assessed using human corneal epithelial cells. Hemolysis was performed using human red blood cells and the results were compared with destabilization data of synthetic liposomes upon addition of ILs. The effect of the ILs on the size and zeta potential of liposomes revealed information on changes in the lipid bilayer. Differential scanning calorimetry was used to study the penetration of the ILs into the lipid bilayer. Pulsed field gradient nuclear magnetic resonance spectroscopy was used to determine whether the ILs occurred as unimers, micelles, or if they were bound to liposomes. The results show that the investigated ILs can be divided into three groups based on the cytotoxicity mechanism: cell wall disrupting ILs, ILs exerting toxicity through both cell wall penetration and metabolic alteration, and ILs affecting solely on cell metabolism.

Nanoplasmonic Sensing and Capillary Electrophoresis for Fast Screening of Interactions between Phosphatidylcholine Biomembranes and Surfactants.

Nanoplasmonic sensing (NPS), based on localized surface plasmon resonance, with sensors composed of glass covered with golden nanodisks and overlaid with a SiO2 coating was applied in this study. Egg phosphatidylcholine (eggPC), being an easily accessible membrane-forming lipid, was used for preparation of biomimicking membranes. Small unilamellar vesicles with an approximate hydrodynamic diameter of 30 nm, formed by sonication in 4-(2-hydroxyethyl)piperazine-1-ethanesulfonic acid buffer, were adsorbed within 10 min on the sensor surface either as intact vesicles or as a planar bilayer. The adsorbed biomembrane systems were further utilized for interaction studies with four different well-known surfactants (negatively and positively charged, zwitterionic, and nonionic) and each surfactant was tested at concentrations below and above the critical micelle concentration (CMC). Our results allowed the evaluation of different NPS patterns for every particular supported membrane system, surfactant, and its concentration. The most significant effect on the membrane was achieved upon the introduction of zwitterionic surfactant micelles, which in fact completely solubilized and removed the lipid membranes from the sensor surface. Other surfactant micelles interacted with the membranes and formed mixed structures remaining on the sensor surface. The studies performed at the concentrations below the CMCs of the surfactants showed that different mixed systems were formed. Depending on the supported membrane system and the type of surfactant, the mixed systems indicated different formation kinetics. Additionally, the final water rinse revealed the stability of the formed systems. To investigate the effect of the studied surfactants on the overall surface charge of the biomembrane, capillary electrophoresis (CE) experiments were carried out in parallel with the NPS analysis. The electroosmotic flow mobility of an eggPC-coated fused silica capillary was used to measure the total surface charge of the biomembrane after its treatment with the surfactants. Our results indicated in general good correlation between CE and NPS data. However, some discrepancies were seen while applying either zwitterionic or positively charged surfactants. This confirmed that CE analysis was able to provide additional data about the investigated systems. Taken together, the combination of NPS and CE proved to be an efficient way to describe the nature of interactions between biomimicking membranes and amphiphilic molecules.

Cholesterol affects the interaction between an ionic liquid and phospholipid vesicles. A study by differential scanning calorimetry and nanoplasmonic sensing.

The present work aims at studying the interactions between cholesterol-rich phosphatidylcholine-based lipid vesicles and trioctylmethylphosphonium acetate ([P8881][OAc]), a biomass dissolving ionic liquid (IL). The effect of cholesterol was assayed by using differential scanning calorimetry (DSC) and nanoplasmonic sensing (NPS) measurement techniques. Cholesterol-enriched dipalmitoyl-phosphatidylcholine vesicles were exposed to different concentrations of the IL, and the derived membrane perturbation was monitored by DSC. The calorimetric data could suggest that the binding and infiltration of the IL are delayed in the vesicles containing cholesterol. To clarify our findings, NPS was applied to quantitatively follow the resistance of 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphocholine incorporating 0, 10, and 50mol% of cholesterol toward the IL exposure over time. The membrane perturbation induced by different concentrations of IL was found to be a concentration dependent process on cholesterol-free lipid vesicles. Moreover, our results showed that lipid depletion in cholesterol-enriched lipid vesicles is inversely proportional to the increasing amount of cholesterol in the vesicles. These findings support that cholesterol-rich lipid bilayers are less susceptible toward membrane disrupting agents as compared to membranes that do not incorporate any sterols. This probably occurs because cholesterol tightens the phospholipid acyl chain packing of the plasma membranes, increasing their resistance and reducing their permeability.

Unraveling Interactions between Ionic Liquids and Phospholipid Vesicles Using Nanoplasmonic Sensing.

Owing to their unique properties and unlimited structural combinations, the ubiquitous use of ionic liquids (ILs) is steadily increasing. The objective of the present work is to shed light onto the effects of amidinium- and phosphonium-based ILs on phospholipid vesicles using a nanoplasmonic sensing measurement technique. A new and relatively simple method was developed for the immobilization of large unilamellar vesicles on two different hydrophilic surfaces composed of titanium dioxide and silicon nitride nanolayers. Among the pretreatment conditions studied, vesicle attachment on both substrate materials was achieved with HEPES buffer in the presence of sodium hydroxide and calcium chloride. To get an understanding of how ILs interact with intact vesicles or with supported lipid bilayers, the ILs 1,5-diazabicyclo(4.3.0)non-5-enium acetate ([DBNH][OAc]), tributyl(tetradecyl)phosphonium acetate ([P14444][OAc]), and tributylmethylphosphonium acetate ([P4441][OAc]) were introduced into the biomimetic system, and the characteristics of their interactions with the immobilized vesicles were determined. Depending on the IL, in situ real-time IL binding and/or phospholipid removal processes were observed. Although [DBNH][OAc] did not have any significant effect on the phospholipid vesicles, the strongest and the most significant effect was observed with [P14444][OAc]. The latter caused clear changes in the phospholipid bilayer: the ILs interacted with the bilayers, resulting in deformation of the vesicles most probably due to the formation of vesicle-IL aggregates. Only a mild effect was observed when [P4441][OAc], at a very high concentration, was exposed to the intact vesicles. In general, these results led to new insights into the effects of ILs on phospholipid vesicles, which are of great importance to the overall understanding of the harmfulness of ILs on biomembranes and biomimicking systems. In addition, the present work highlights the pivotal role of this highly surface-sensitive indirect biosensing technique in scrutinizing and dissecting the integrity and architecture of phospholipid vesicles in the nanoscale range.

Adsorption of Proteins on Colloidal Lignin Particles for Advanced Biomaterials.

Coating of colloidal lignin particles (CLPs), or lignin nanoparticles (LNPs), with proteins was evaluated in order to establish a safe, self-assembly mediated modification technique to tune their surface chemistry. Gelatin and poly- l-lysine formed the most pronounced protein corona on the CLP surface, as determined by dynamic light scattering (DLS) and zeta potential measurements. Spherical morphology of individual protein coated CLPs was confirmed by transmission electron (TEM) and atomic force (AFM) microscopy. A mechanistic adsorption study with several random coiled and globular model proteins was carried out using quartz crystal microbalance with dissipation monitoring (QCM-D). The three-dimensional (3D) protein fold structure and certain amino acid interactions were decisive for the protein adsorption on the lignin surface. The main driving forces for protein adsorption were electrostatic, hydrophobic, and van der Waals interactions, and hydrogen bonding. The relative contributions of these interactions were highly dependent on the ionic strength of the surrounding medium. Capillary electrophoresis (CE) and Fourier transform infrared spectroscopy (FTIR) provided further evidence of the adsorption-enhancing role of specific amino acid residues such as serine and proline. These results have high impact on the utilization of lignin as colloidal particles in biomedicine and biodegradable materials, as the protein corona enables tailoring of the CLP surface chemistry for intended applications.

Monoliths in capillary electrochromatography and capillary liquid chromatography in conjunction with mass spectrometry.

Here, we have reviewed separation studies utilizing monolithic capillary columns for separation of compounds preceding MS analysis. The review is divided in two parts according to the used separation method, namely CEC and capillary LC (cLC). Based on our overview, monolithic CEC-MS technique have been more focused on the syntheses of highly specialized and selective separation phase materials for fast and efficient separation of specific types of analytes. In contrast, monolithic cLC-MS is more widely used and is often employed, for instance, in the analysis of oligonucleotides, metabolites, and peptides and proteins in proteomic studies. While poly(styrene-divinylbenzene)-based and silica-based monolithic capillaries found their place in proteomic analyses, the other laboratory-synthesized monoliths still wait for their wider utilization in routine analyses. The development of new monolithic materials will most likely continue due to the demand of more efficient and rapid separation of increasingly complex samples.

Novel cationic polyelectrolyte coatings for capillary electrophoresis.

The use of bare fused silica capillary in CE can sometimes be inconvenient due to undesirable effects including adsorption of sample or instability of the EOF. This can often be avoided by coating the inner surface of the capillary. In this work, we present and characterize two novel polyelectrolyte coatings (PECs) poly(2-(methacryloyloxy)ethyl trimethylammonium iodide) (PMOTAI) and poly(3-methyl-1-(4-vinylbenzyl)-imidazolium chloride) (PIL-1) for CE. The coated capillaries were studied using a series of aqueous buffers of varying pH, ionic strength, and composition. Our results show that the investigated polyelectrolytes are usable as semi-permanent (physically adsorbed) coatings with at least five runs stability before a short coating regeneration is necessary. Both PECs showed a considerably decreased stability at pH 11.0. The EOF was higher using Good's buffers than with sodium phosphate buffer at the same pH and ionic strength. The thickness of the PEC layers studied by quartz crystal microbalance was 0.83 and 0.52 nm for PMOTAI and PIL-1, respectively. The hydrophobicity of the PEC layers was determined by analysis of a homologous series of alkyl benzoates and expressed as the distribution constants. Our result demonstrates that both PECs had comparable hydrophobicity, which enabled separation of compounds with log Po/w > 2. The ability to separate cationic drugs was shown with ß-blockers, compounds often misused in doping. Both coatings were also able to separate hydrolysis products of the ionic liquid 1,5-diazabicyclo[4.3.0]non-5-ene acetate at highly acidic conditions, where bare fused silica capillaries failed to accomplish the separation.

Effect of Ionic Liquids on Zebrafish (Danio rerio) Viability, Behavior, and Histology; Correlation between Toxicity and Ionic Liquid Aggregation.

The effect of 11 common amidinium, imidazolium, and phosphonium based ionic liquids (ILs) on zebrafish (Danio rerio) and Chinese hamster ovary cells (CHO) was investigated with specific emphasis on the effect of anion and cation chain length and aggregation of phosphonium based ILs. Viability and behavioral alteration in the locomotor activity and place preference, after IL treatment of 5 days postfertilization larvae, was recorded. Behavior and histological damage evaluation was performed for adult fish in order to get insight into the long-term effects of two potential biomass-dissolving ILs, [DBNH][OAc] and [P4441][OAc]. To get an understanding of how IL aggregation is linked to the toxicity of ILs, median effective concentrations (EC50) and critical micelle concentrations (CMC) were determined. The long-chain ILs were significantly more toxic than the short-chain ones, and the anion chain length was shown to be less significant than the cation chain length when assessing the impact of ILs on the viability of the organisms. Furthermore, most of the ILs were as monomers when the EC50 was reached. In addition, the ILs used in the long-term tests showed no significant effect on the zebrafish behavior, breeding, or histology, within the used concentration range.

The structure of Lactobacillus brevis surface layer reassembled on liposomes differs from native structure as revealed by SAXS.

The reassembly of the S-layer protein SlpA of Lactobacillus brevis ATCC 8287 on positively charged liposomes was studied by small angle X-ray scattering (SAXS) and zeta potential measurements. SlpA was reassembled on unilamellar liposomes consisting of 1-palmitoyl-2-oleyl-sn-glycero-3-phosphocholine and 1,2-dioleoyl-3-trimethylammonium-propane, prepared by extrusion through membranes with pore sizes of 50nm and 100nm. Similarly extruded samples without SlpA were used as a reference. The SlpA-containing samples showed clear diffraction peaks in their SAXS intensities. The lattice constants were calculated from the diffraction pattern and compared to those determined for SlpA on native cell wall fragments. Lattice constants for SlpA reassembled on liposomes (a=9.29nm, b=8.03nm, and γ=84.9°) showed a marked change in the lattice constants b and γ when compared to those determined for SlpA on native cell wall fragments (a=9.41nm, b=6.48nm, and γ=77.0°). The latter are in good agreement with values previously determined by electron microscopy. This indicates that the structure formed by SlpA is stable on the bacterial cell wall, but SlpA reassembles into a different structure on cationic liposomes. From the (10) reflection, the lower limit of crystallite size of SlpA on liposomes was determined to be 92nm, corresponding to approximately ten aligned lattice planes.

Impact of amphiphilic biomass-dissolving ionic liquids on biological cells and liposomes.

The toxicity of some promising biomass-dissolving amidinium-, imidazolium-, and phosphonium-based ionic liquids (ILs), toward two different cell lines, human corneal epithelial cells and Escherichia coli bacterial cells, was investigated. In addition, dynamic light scattering (DLS) and ζ potential measurements were used to study the effect of the ILs on the size and surface charge of some model liposomes. Capillary electrophoresis (CE) was used for determination of the electrophoretic mobilities of the liposomes and for determination of the critical micelle concentration (cmc) of the ILs. The toxicity of the phosphonium ILs was highly dependent on the longest linear chain of the IL, due to increasing hydrophobicity, with the long-chain phosphonium ILs being toxic while the shorter-chain versions were significantly less toxic or not toxic at all. Amidinium and imidazolium ILs showed no significant effect on the cells, within the concentration range used. Moreover, the more hydrophobic ILs were found to have a major effect on the surface charges and size distributions of the model liposomes, which can lead to disruption of the lipid bilayer. This indicates that the cytotoxicity is at least to some extent dependent on direct interactions between ILs and the biomembrane.

Immobilised artificial membrane liquid chromatography vs liposome electrokinetic capillary chromatography: Suitability in drug/bio membrane partitioning studies and effectiveness in the assessment of the passage of drugs through the respiratory mucosa.

This study pioneers a comparison of the application of biomimetic techniques, immobilised artificial membrane liquid chromatography (IAM LC) and liposome electrokinetic capillary chromatography (LEKC), for the prediction of pulmonary drug permeability. The pulmonary absorption profiles of 26 structurally unrelated drug-like molecules were evaluated using their IAM hydrophobicity index (CHI IAM) measured in IAM LC, and the logarithm of distribution constants (log KLEKC) derived from the LEKC experiments. Lipophilicity (phospholipids) parameters obtained from IAM LC and most LEKC analyses were linearly related to the n-octanol/water partitioning coefficients of the neutral forms (i.e., log Po/w values) to a moderate extent. However, the relationship with distribution coefficients at the experimental pH (7.4) (i.e., log D7.4) were weaker overall for IAM LC data and sigmoidal for some liposome compositions (phosphatidyl choline (PC): phosphatidyl inositol (PI) 85:15 mol% and 90:10 mol%) and concentrations (4 mM) in LEKC. This suggests that phospholipid partitioning supports both hydrophobic and electrostatic interactions occurring between ionised drugs and charged phospholipid moieties. The latter interactions are original when compared to those taking place in the more established n-octanol/water partitioning systems. A stronger correlation (R2 > 0.65) was identified between the LEKC retention parameters, and the experimental apparent lung permeability (i.e., log Papp values) as opposed to the values obtained by IAM LC. Therefore, LEKC offers unprecedented advantages over IAM LC in simulating cell membrane partitioning processes in the pulmonary delivery of drugs. Although LEKC has the advantage of more effectively simulating the electrostatic and hydrophobic forces in drug/pulmonary membrane interactions in vitro, the technique is unsuitable for analysing highly hydrophilic neutral or anionic compounds at the experimental pH. Conversely, IAM LC is useful for analysing compounds spanning a wider range of lipophilicity. Its simpler and more robust implementation, and propensity for high-throughput automation make it a favourable choice for researchers in drug development and pharmacological studies.

Effect of lipid emulsion on vasoconstriction induced by epinephrine or norepinephrine in isolated rat aorta.

BACKGROUND: Epinephrine (EPI) or norepinephrine (NOR) is widely used to treat cardiovascular collapse during lipid emulsion (LE) resuscitation for drug toxicity. However, the effect of LE on the vasoconstriction caused by EPI or NOR remains unknown. The purpose of this study was to examine the effect of an LE (Intralipid) on the vasoconstriction caused by EPI and NOR in isolated rat aorta. METHODS: The effect of LE on the vasoconstriction caused by EPI or NOR in isolated rat aorta was examined. Additionally, the effect of LE on the calcium increase caused by EPI or NOR was investigated. The distribution constant (KD: lipid to aqueous phase) of EPI or NOR between a LE (1%) and an aqueous phase was determined. RESULTS: LE (1 and 2%) did not significantly alter vasoconstriction caused by EPI or NOR in isolated endothelium-intact aorta. Moreover, the LE did not significantly alter the increased calcium level caused by EPI or NOR. The log KD of EPI in the LE (1%) was -0.71, -0.99, and -1.00 at 20, 50, and 100 mM ionic strength, respectively. The log KD of NOR in the LE (1%) was -1.22, -1.25, and -0.96 at 20, 50, and 100 mM ionic strength, respectively. CONCLUSIONS: Taken together, the Intralipid emulsion did not alter vasoconstriction induced by EPI or NOR that seems to be due to the hydrophilicity of EPI or NOR, leading to sustained hemodynamic support produced by EPI or NOR used during LE resuscitation.

Study on capillaries covalently bound with phospholipid vesicles for open-tubular capillary electrochromatography and application to on-line open-tubular capillary electrochromatography-mass spectrometry.

Phospholipid vesicles were covalently attached to iminoaldehyde-coated fused silica capillaries and applied to the separation of model steroids by open-tubular CEC (OT-CEC). The effects of reducing the formed Schiff's base with sodium borohydride and of the liposome composition on the stability of the coating were investigated. In addition, the studies were focused on the optimization of running conditions (pH values and composition of BGE solution) when CEC, using capillaries covalently bound with liposome dispersions, was coupled to MS. The effect of cholesterol in the liposome dispersion on the binding of model analytes was studied, using liposome dispersions comprising 80/20 mol% zwitterionic 1-palmitoyl-2-oleyl-sn-glycero-3-phosphocholine (POPC) and the negatively charged phospholipid 1-palmitoyl-2-oleoyl-sn-glycero-3-phospho-L-serine (POPS) and 40/40/20 mol% POPC/POPS/cholesterol. Cholesterol in liposomes (greatly) enhanced the stability of the capillaries by making the coatings more rigid, resulting in lower retention factors for all the studied model steroids. Although most of the studies were carried out by open tubular CEC-UV Vis, the applicability of the capillaries to on-line CEC-MS was demonstrated as well. On-line CEC-MS studies on model steroids proved the suitability of coated capillaries for analyte-lipid membrane interaction studies, and especially for such analytes that are difficult to detect by conventional on-line UV Vis.

Capillary electromigration techniques for studying interactions between analytes and lipid dispersions.

CE has matured into a well-known and much used separation technique, with applications covering more or less all types of samples. EKC, which originally was developed for the separation of uncharged compounds, is still today under much development, with main focus on finding the perfect or ideal carriers (pseudo-stationary phase) for a broad range of analytes. In this review, the use of lipid dispersions as pseudostationary phases in EKC performed in capillaries and microchips, in addition to CE frontal analysis and partial filling EKC using lipid dispersions is discussed. Various types of lipid dispersions including liposomes, PEG-stabilized aggregates, proteoliposomes, lipid-based nanoparticles, and commercial lipid emulsions are described. The purpose of the review is to give the reader an overview of how EKC, CE frontal analysis, and partial filling EKC, have been applied to the study of interactions between analytes and lipid membranes.