Van der Waals polarity-engineered 3D integration of 2D complementary logic.

Vertical three-dimensional integration of two-dimensional (2D) semiconductors holds great promise, as it offers the possibility to scale up logic layers in the z axis1-3. Indeed, vertical complementary field-effect transistors (CFETs) built with such mixed-dimensional heterostructures4,5, as well as hetero-2D layers with different carrier types6-8, have been demonstrated recently. However, so far, the lack of a controllable doping scheme (especially p-doped WSe2 (refs. 9-17) and MoS2 (refs. 11,18-28)) in 2D semiconductors, preferably in a stable and non-destructive manner, has greatly impeded the bottom-up scaling of complementary logic circuitries. Here we show that, by bringing transition metal dichalcogenides, such as MoS2, atop a van der Waals (vdW) antiferromagnetic insulator chromium oxychloride (CrOCl), the carrier polarity in MoS2 can be readily reconfigured from n- to p-type via strong vdW interfacial coupling. The consequential band alignment yields transistors with room-temperature hole mobilities up to approximately 425 cm2 V-1 s-1, on/off ratios reaching 106 and air-stable performance for over one year. Based on this approach, vertically constructed complementary logic, including inverters with 6 vdW layers, NANDs with 14 vdW layers and SRAMs with 14 vdW layers, are further demonstrated. Our findings of polarity-engineered p- and n-type 2D semiconductor channels with and without vdW intercalation are robust and universal to various materials and thus may throw light on future three-dimensional vertically integrated circuits based on 2D logic gates.

Flatband λ-Ti3O5 towards extraordinary solar steam generation.

Solar steam interfacial evaporation represents a promising strategy for seawater desalination and wastewater purification owing to its environmentally friendly character1-3. To improve the solar-to-steam generation, most previous efforts have focused on effectively harvesting solar energy over the full solar spectrum4-7. However, the importance of tuning joint densities of states in enhancing solar absorption of photothermal materials is less emphasized. Here we propose a route to greatly elevate joint densities of states by introducing a flat-band electronic structure. Our study reveals that metallic λ-Ti3O5 powders show a high solar absorptivity of 96.4% due to Ti-Ti dimer-induced flat bands around the Fermi level. By incorporating them into three-dimensional porous hydrogel-based evaporators with a conical cavity, an unprecedentedly high evaporation rate of roughly 6.09 kilograms per square metre per hour is achieved for 3.5 weight percent saline water under 1 sun of irradiation without salt precipitation. Fundamentally, the Ti-Ti dimers and U-shaped groove structure exposed on the λ-Ti3O5 surface facilitate the dissociation of adsorbed water molecules and benefit the interfacial water evaporation in the form of small clusters. The present work highlights the crucial roles of Ti-Ti dimer-induced flat bands in enchaining solar absorption and peculiar U-shaped grooves in promoting water dissociation, offering insights into access to cost-effective solar-to-steam generation.

Phonon stability boundary and deep elastic strain engineering of lattice thermal conductivity.

Recent studies have reported the experimental discovery that nanoscale specimens of even a natural material, such as diamond, can be deformed elastically to as much as 10% tensile elastic strain at room temperature without the onset of permanent damage or fracture. Computational work combining ab initio calculations and machine learning (ML) algorithms has further demonstrated that the bandgap of diamond can be altered significantly purely by reversible elastic straining. These findings open up unprecedented possibilities for designing materials and devices with extreme physical properties and performance characteristics for a variety of technological applications. However, a general scientific framework to guide the design of engineering materials through such elastic strain engineering (ESE) has not yet been developed. By combining first-principles calculations with ML, we present here a general approach to map out the entire phonon stability boundary in six-dimensional strain space, which can guide the ESE of a material without phase transitions. We focus on ESE of vibrational properties, including harmonic phonon dispersions, nonlinear phonon scattering, and thermal conductivity. While the framework presented here can be applied to any material, we show as an example demonstration that the room-temperature lattice thermal conductivity of diamond can be increased by more than 100% or reduced by more than 95% purely by ESE, without triggering phonon instabilities. Such a framework opens the door for tailoring of thermal-barrier, thermoelectric, and electro-optical properties of materials and devices through the purposeful design of homogeneous or inhomogeneous strains.

Thermoelectric performance of a metastable thin-film Heusler alloy.

Thermoelectric materials transform a thermal gradient into electricity. The efficiency of this process relies on three material-dependent parameters: the Seebeck coefficient, the electrical resistivity and the thermal conductivity, summarized in the thermoelectric figure of merit. A large figure of merit is beneficial for potential applications such as thermoelectric generators. Here we report the thermal and electronic properties of thin-film Heusler alloys based on Fe2V0.8W0.2Al prepared by magnetron sputtering. Density functional theory calculations suggest that the thin films are metastable states, and measurements of the power factor-the ratio of the Seebeck coefficient squared divided by the electrical resistivity-suggest a high intrinsic figure of merit for these thin films. This may arise from a large differential density of states at the Fermi level and a Weyl-like electron dispersion close to the Fermi level, which indicates a high mobility of charge carriers owing to linear crossing in the electronic bands.

Intercalating Architecture for the Design of Charge Density Wave in Metallic MA2Z4 Materials.

We present a novel approach to induce charge density waves (CDWs) in metallic MA2Z4 materials, resembling the behavior observed in transition metal dichalcogenides (TMDCs). This method leverages the intercalating architecture to maintain the same crystal field and Fermi surface topologies. Our investigation reveals that CDW instability in these materials arises from electron-phonon coupling (EPC) between the d band and longitudinal acoustic (LA) phonons, mirroring TMDC's behavior. By combining α-MA2Z4 with 1H-MX2 materials in a predictive CDW phase diagram using critical EPC constants, we demonstrate the feasibility of extending CDW across material families with comparable crystal fields and reveal the crucial role in CDW instability of the competition between ionic charge transfer and electron correlation. We further uncover a strain-induced Mott transition in ß2-NbGe2N4 monolayer featuring star-of-David patterns. This work highlights the potential of intercalating architecture to engineer CDW materials, expanding our understanding of CDW instability and correlation physics.

Controllable Pyridine N-Oxidation-Nucleophilic Dechlorination Process for Enhanced Dechlorination of Chloropyridines: The Cooperation of HCO4- and HO2.

Dechlorination of chloropyridines can eliminate their detrimental environmental effects. However, traditional dechlorination technology cannot efficiently break the C-Cl bond of chloropyridines, which is restricted by the uncontrollable nonselective species. Hence, we propose the carbonate species-activated hydrogen peroxide (carbonate species/H2O2) process wherein the selective oxidant (peroxymonocarbonate ion, HCO4-) and selective reductant (hydroperoxide anion, HO2-) controllably coexist by manipulation of reaction pH. Taking 2-chloropyridine (Cl-Py) as an example, HCO4- first induces Cl-Py into pyridine N-oxidation intermediates, which then suffer from the nucleophilic dechlorination by HO2-. The obtained dechlorination efficiencies in the carbonate species/H2O2 process (32.5-84.5%) based on the cooperation of HCO4- and HO2- are significantly higher than those in the HO2--mediated sodium hydroxide/hydrogen peroxide process (0-43.8%). Theoretical calculations confirm that pyridine N-oxidation of Cl-Py can effectively lower the energy barrier of the dechlorination process. Moreover, the carbonate species/H2O2 process exhibits superior anti-interference performance and low electric energy consumption. Furthermore, Cl-Py is completely detoxified via the carbonate species/H2O2 process. More importantly, the carbonate species/H2O2 process is applicable for efficient dehalogenation of halogenated pyridines and pyrazines. This work offers a simple and useful strategy to enhance the dehalogenation efficiency of halogenated organics and sheds new insights into the application of the carbonate species/H2O2 process in practical environmental remediation.

Low-oxygen rare earth steels.

Rare earth (RE) addition to steels to produce RE steels has been widely applied when aiming to improve steel properties. However, RE steels have exhibited extremely variable mechanical performances, which has become a bottleneck in the past few decades for their production, utilization and related study. Here in this work, we discovered that the property variation of RE steels stems from the presence of oxygen-based inclusions. We proposed a dual low-oxygen technology, and keeping low levels of oxygen content in steel melts and particularly in the raw RE materials, which have long been ignored, to achieve impressively stable and favourable RE effects. The fatigue life is greatly improved by only parts-per-million-level RE addition, with a 40-fold improvement for the tension-compression fatigue life and a 40% enhancement of the rolling contact fatigue life. We find that RE appears to act by lowering the carbon diffusion rate and by retarding ferrite nucleation at the austenite grain boundaries. Our study reveals that only under very low-oxygen conditions can RE perform a vital role in purifying, modifying and micro-alloying steels, to improve the performance of RE steels.

Combining Machine Learning and Many-Body Calculations: Coverage-Dependent Adsorption of CO on Rh(111).

Adsorption of carbon monoxide (CO) on transition-metal surfaces is a prototypical process in surface sciences and catalysis. Despite its simplicity, it has posed great challenges to theoretical modeling. Pretty much all existing density functionals fail to accurately describe surface energies and CO adsorption site preference as well as adsorption energies simultaneously. Although the random phase approximation (RPA) cures these density functional theory failures, its large computational cost makes it prohibitive to study the CO adsorption for any but the simplest ordered cases. Here, we address these challenges by developing a machine-learned force field (MLFF) with near RPA accuracy for the prediction of coverage-dependent adsorption of CO on the Rh(111) surface through an efficient on-the-fly active learning procedure and a Δ-machine learning approach. We show that the RPA-derived MLFF is capable to accurately predict the Rh(111) surface energy and CO adsorption site preference as well as adsorption energies at different coverages that are all in good agreement with experiments. Moreover, the coverage-dependent ground-state adsorption patterns and adsorption saturation coverage are identified.

Direct Observation of Topological Phonons in Graphene.

Phonons, as the most fundamental emergent bosons in condensed matter systems, play an essential role in the thermal, mechanical, and electronic properties of crystalline materials. Recently, the concept of topology has been introduced to phonon systems, and the nontrivial topological states also exist in phonons due to the constraint by the crystal symmetry of the space group. Although the classification of various topological phonons has been enriched theoretically, experimental studies were limited to several three-dimensional (3D) single crystals with inelastic x-ray or neutron scatterings. The experimental evidence of topological phonons in two-dimensional (2D) materials is absent. Here, using high-resolution electron energy loss spectroscopy following our theoretical predictions, we directly map out the phonon spectra of the atomically thin graphene in the entire 2D Brillouin zone, and observe two nodal-ring phonons and four Dirac phonons. The closed loops of nodal-ring phonons and the conical structure of Dirac phonons in 2D momentum space are clearly revealed by our measurements, in nice agreement with our theoretical calculations. The ability of 3D mapping (2D momentum space and energy space) of phonon spectra opens up a new avenue to the systematic identification of the topological phononic states. Our work lays a solid foundation for potential applications of topological phonons in superconductivity, dynamic instability, and phonon diode.

Targeted Decomplexation of Metal Complexes for Efficient Metal Recovery by Ozone/Percarbonate.

Traditional methods cannot efficiently recover Cu from Cu(II)-EDTA wastewater and encounter the formation of secondary contaminants. In this study, an ozone/percarbonate (O3/SPC) process was proposed to efficiently decomplex Cu(II)-EDTA and simultaneously recover Cu. The results demonstrate that the O3/SPC process achieves 100% recovery of Cu with the corresponding kobs value of 0.103 min-1 compared with the typical •OH-based O3/H2O2 process (81.2%, 0.042 min-1). The carbonate radical anion (CO3•-) is generated from the O3/SPC process and carries out the targeted attack of amino groups of Cu(II)-EDTA for decarboxylation and deamination processes, resulting in successive cleavage of Cu-O and Cu-N bonds. In comparison, the •OH-based O3/H2O2 process is predominantly responsible for the breakage of Cu-O bonds via decarboxylation and formic acid removal. Moreover, the released Cu(II) can be transformed into stable copper precipitates by employing an endogenous precipitant (CO32-), accompanied by toxic-free byproducts in the O3/SPC process. More importantly, the O3/SPC process exhibits excellent metal recovery in the treatment of real copper electroplating wastewater and other metal-EDTA complexes. This study provides a promising technology and opens a new avenue for the efficient decomplexation of metal-organic complexes with simultaneous recovery of valuable metal resources.

Two-dimensional layered MSi2N4 (M = Mo, W) as promising thermal management materials: a comparative study.

With the miniaturization and integration of nanoelectronic devices, efficient heat removal becomes a key factor affecting their reliable operation. Two-dimensional (2D) materials, with high intrinsic thermal conductivity, good mechanical flexibility, and precisely controllable growth, are widely accepted as ideal candidates for thermal management materials. In this work, by solving the phonon Boltzmann transport equation (BTE) based on first-principles calculations, we investigated the thermal conductivity of novel 2D layered MSi2N4 (M = Mo, W). Our results point to a competitive thermal conductivity as large as 162 W m-1 K-1 of monolayer MoSi2N4, which is around two times larger than that of WSi2N4 and seven times larger than that of monolayer MoS2 despite their similar non-planar structures. It is revealed that the high thermal conductivity arises mainly from its large group velocity and low anharmonicity. Our result suggests that MoSi2N4 could be a potential candidate for 2D thermal management materials.

Flexible layer-structured Bi2Te3 thermoelectric on a carbon nanotube scaffold.

Inorganic chalcogenides are traditional high-performance thermoelectric materials. However, they suffer from intrinsic brittleness and it is very difficult to obtain materials with both high thermoelectric ability and good flexibility. Here, we report a flexible thermoelectric material comprising highly ordered Bi2Te3 nanocrystals anchored on a single-walled carbon nanotube (SWCNT) network, where a crystallographic relationship exists between the Bi2Te3 <[Formula: see text]> orientation and SWCNT bundle axis. This material has a power factor of ~1,600 µW m-1 K-2 at room temperature, decreasing to 1,100 µW m-1 K-2 at 473 K. With a low in-plane lattice thermal conductivity of 0.26 ± 0.03 W m-1 K-1, a maximum thermoelectric figure of merit (ZT) of 0.89 at room temperature is achieved, originating from a strong phonon scattering effect. The origin of the excellent flexibility and thermoelectric performance of the Bi2Te3-SWCNT material is attributed, by experimental and computational evidence, to its crystal orientation, interface and nanopore structure. Our results provide insight into the design and fabrication of high-performance flexible thermoelectric materials.

Coexistence of intrinsic piezoelectricity and ferromagnetism induced by small biaxial strain in septuple-atomic-layer VSi2P4.

The septuple-atomic-layer VSi2P4 with the same structure of experimentally synthesized MoSi2N4 is predicted to be a spin-gapless semiconductor (SGS) with the generalized gradient approximation (GGA). In this work, the biaxial strain is applied to tune the electronic properties of VSi2P4, and it spans a wide range of properties upon increasing the strain from a ferromagnetic metal (FMM) to SGS to a ferromagnetic semiconductor (FMS) to SGS to a ferromagnetic half-metal (FMHM). Due to broken inversion symmetry, the coexistence of ferromagnetism and piezoelectricity can be achieved in FMS VSi2P4 with the strain range of 0% to 4%. The calculated piezoelectric strain coefficients d11 for 1%, 2% and 3% strains are 4.61 pm V-1, 4.94 pm V-1 and 5.27 pm V-1, respectively, which are greater than or close to a typical value of 5 pm V-1 for bulk piezoelectric materials. Finally, similar to VSi2P4, the coexistence of piezoelectricity and ferromagnetism can be realized by strain in the VSi2N4 monolayer. Our works show that VSi2P4 in the FMS phase with intrinsic piezoelectric properties can have potential applications in spin electronic devices.

Underlying Topological Dirac Nodal Line Mechanism of the Anomalously Large Electron-Phonon Coupling Strength on a Be (0001) Surface.

Beryllium has recently been discovered to harbor a Dirac nodal line (DNL) in its bulk phase and the DNL-induced nontrivial surface states (DNSSs) on its (0001) surface, rationalizing several already-existing historic puzzles [Phys. Rev. Lett. 117, 096401 (2016)PRLTAO0031-900710.1103/PhysRevLett.117.096401]. However, to date the underlying mechanism as to why its (0001) surface exhibits an anomalously large electron-phonon coupling effect (λ_{e-ph}^{s}≈1.0) remains unresolved. Here, by means of first-principles calculations, we show that the coupling of the DNSSs with the phononic states mainly contributes to its novel surface e-ph enhancement. Besides the fact that the experimentally observed λ_{e-ph}^{s} and the main Eliashberg coupling function (ECF) peaks are reproduced well in our current calculations, we decompose the ECF α^{2}F(k,q;v) and the e-ph coupling strength λ(k,q;v) as a function of each electron momentum (k), each phonon momentum (q), and each phonon mode (v), evidencing the robust connection between the DNSSs and both α^{2}F(k,q;v) and λ(k,q;v). The results reveal the strong e-ph coupling between the DNSSs and the phonon modes, which contributes over 80% of the λ_{e-ph}^{s} coefficient on the Be (0001) surface. It highlights that the anomalously large e-ph coefficient on the Be (0001) surface can be attributed to the presence of its DNL-induced DNSSs, clarifying the long-debated mechanism.

Dirac Node Lines in Pure Alkali Earth Metals.

Beryllium is a simple alkali earth metal, but has been the target of intensive studies for decades because of its unusual electron behavior at surfaces. The puzzling aspects include (i) severe deviations from the description of the nearly free-electron picture, (ii) an anomalously large electron-phonon coupling effect, and (iii) giant Friedel oscillations. The underlying origins for such anomalous surface electron behavior have been under active debate, but with no consensus. Here, by means of first-principles calculations, we discover that this pure metal system, surprisingly, harbors the Dirac node line (DNL) that in turn helps to rationalize many of the existing puzzles. The DNL is featured by a closed line consisting of linear band crossings, and its induced topological surface band agrees well with previous photoemission spectroscopy observations on the Be (0001) surface. We further reveal that each of the elemental alkali earth metals of Mg, Ca, and Sr also harbors the DNL and speculate that the fascinating topological property of the DNL might naturally exist in other elemental metals as well.

Stable compositions and structures in the Na-Bi system.

At P = 1 atm, the only stable compounds in the Na-Bi binary system are Na3Bi and NaBi, which have recently been discovered to exhibit intriguing electronic behaviour as a 3D topological Dirac semimetal and a topological metal, respectively. By means of first-principles calculations coupled with evolutionary structural searches, we have systematically investigated the phase stabilities, the crystal structures and the corresponding electronic properties of the binary Na-Bi system. At ambient pressure, our calculations have reproduced well the experimentally observed compositions and structures of Na3Bi and NaBi. At high pressures, we have found that Na3Bi is transformed from the ground-state hexagonal hP24 phase to a cubic cF16 phase above 0.8 GPa, confirming previous experiments, and then to a conventional band-insulating oC16 phase above 118 GPa. The cubic cF16 phase would exhibit novel topological band ordering similar to that in HgTe. The topological metal NaBi has also been found to undergo a structural phase transition from the ambient tetragonal tP2 to a cubic cP2 structure above 36 GPa. Four compounds never before reported, Na6Bi, Na4Bi, Na2Bi and NaBi2, with new compositions, have been predicted to be experimentally synthesizable over a wide range of pressures starting at 142.5 GPa, 105 GPa, 38 GPa and 171 GPa, respectively. Moreover, a common charge transfer from Na to Bi has been observed for all compounds, but substantial interstitial charge localization in Na atomic cages has been noticed only in two compounds, Na6Bi and Na4Bi, and may be associated with close-packed Na environments.

First-principles study of ground-state properties of U2Mo.

By means of first-principles calculations, we have systematically investigated the structural, elastic, vibrational, thermal and electronic properties of the ground-state phase for the intermetallic compound U2Mo. Our results reveal that the previously synthesized I4/mmm structure of U2Mo is a metastable phase and unstable, neither thermodynamically nor vibrationally at the ground state. In combination with the evolutionary structural searches, our first-principles calculations suggest a new ground-state Pmmn phase, which has been confirmed theoretically to be stable, both thermodynamically and vibrationally. Moreover, through the DFT + D technique we have discussed the influence of van der Waals interactions on the structural, elastic and vibrational properties, revealing a weak effect in pure U and Mo solids and U2Mo alloy. The analysis of the electronic band structures evidences its electronic stabilities with the appearance of a deep valley in the density of states at the Fermi level. Moreover, we have investigated further the temperature-dependent structural, thermal expansion and elastic properties of our proposed Pmmn ground-state phase. These results are expected to stimulate further experimental investigations of the ground-state phase of U2Mo.

Variable-composition structural optimization and experimental verification of MnB3 and MnB4.

In combination with variable-composition evolutionary algorithm calculations and first-principles calculations, we have systematically searched for all the stable compounds and their crystal structures in the extensively investigated binary Mn-B system. Our results have uncovered four viable ground-state compounds, with Mn2B, MnB, and MnB4, and previously never reported MnB3 and two metastable compounds, MnB2 and Mn3B4. Our calculations demonstrate that the early characterized mC10 structure of MnB4 showed dynamic instability with large imaginary phonon frequencies and, instead, a new mP20 structure is predicted to be stable both dynamically and thermodynamically, with a considerable energy gain and no imaginary phonon frequencies. The new MnB3 compound crystallizes in the monoclinic mC16 structure which lies 3.2 meV per atom below the MnB (oP8) ↔ MnB4 (mP20) tie-line at T = 0 K. Furthermore, these proposed phases have been verified by our annealed samples after arc-melting synthesis and corresponding powder XRD measurements.

Switchable Quantized Signal between Longitudinal Conductance and Hall Conductance in Dual Quantum Spin Hall Insulator TaIrTe4.

Topological insulating states in 2-dimensional (2D) materials are ideal systems to study different types of quantized response signals due to their in gap metallic states. Very recently, the quantum spin Hall effect was discovered in monolayer TaIrTe4 via the observation of quantized longitudinal conductance that rarely exists in other 2D topological insulators. The nontrivial Z 2 topological charges can exist at both charge neutrality point and the van Hove singularity point with correlation-effect-induced bandgap. On the basis of this model 2D material, we studied the switch of quantized signals between longitudinal conductance and transversal Hall conductance via tuning external magnetic field. In Z 2 topological phase of monolayer TaIrTe4, the zero Chern number can be understood as 1 - 1 = 0 from the double band inversion from spin-up and spin-down channels. After applying a magnetic field perpendicular to the plane, the Zeeman split changes the band order for one branch of the band inversion from spin-up and spin-down channels, along with a sign charge of the Berry phase. Then, the net Chern number of 1 - 1 = 0 is tuned to 1 + 1 = 2 or -1 - 1 = -2 depending on the orientation of the magnetic field. The quantized signal not only provides another effective method for the verification of topological state in monolayer TaIrTe4 but also offers a strategy for the utilization of the new quantum topological states based on switchable quantized responses.

Leech Poecilobdella manillensis protein extract ameliorated hyperuricemia by restoring gut microbiota dysregulation and affecting serum metabolites.

BACKGROUND: Hyperuricemia (HUA) is a public health concern that needs to be solved urgently. The lyophilized powder of Poecilobdella manillensis has been shown to significantly alleviate HUA; however, its underlying metabolic regulation remains unclear. AIM: To explore the underlying mechanisms of Poecilobdella manillensis in HUA based on modulation of the gut microbiota and host metabolism. METHODS: A mouse model of rapid HUA was established using a high-purine diet and potassium oxonate injections. The mice received oral drugs or saline. Additionally, 16S rRNA sequencing and ultra-high performance liquid chromatography with quadrupole time-of-flight mass spectrometry-based untargeted metabolomics were performed to identify changes in the microbiome and host metabolome, respectively. The levels of uric acid transporters and epithelial tight junction proteins in the renal and intestinal tissues were analyzed using an enzyme-linked immunosorbent assay. RESULTS: The protein extract of Poecilobdella manillensis lyophilized powder (49 mg/kg) showed an enhanced anti-trioxypurine ability than that of allopurinol (5 mg/kg) (P < 0.05). A total of nine bacterial genera were identified to be closely related to the anti-trioxypurine activity of Poecilobdella manillensis powder, which included the genera of Prevotella, Delftia, Dialister, Akkermansia, Lactococcus, Escherichia_Shigella, Enterococcus, and Bacteroides. Furthermore, 22 metabolites in the serum were found to be closely related to the anti-trioxypurine activity of Poecilobdella manillensis powder, which correlated to the Kyoto Encyclopedia of Genes and Genomes pathways of cysteine and methionine metabolism, sphingolipid metabolism, galactose metabolism, and phenylalanine, tyrosine, and tryptophan biosynthesis. Correlation analysis found that changes in the gut microbiota were significantly related to these metabolites. CONCLUSION: The proteins in Poecilobdella manillensis powder were effective for HUA. Mechanistically, they are associated with improvements in gut microbiota dysbiosis and the regulation of sphingolipid and galactose metabolism.