Effect of Ca2+ on 3D printing accuracy and antioxidant efficacy of nano starch-lutein surimi: mechanical properties, chemical bonds and release rate.

BACKGROUND: Nano starch-lutein (NS-L) can be used in three-dimensional (3D) printed functional surimi. However, the lutein release and printing effect are not ideal. The purpose of this study was to facilitate the function and printing properties of surimi by adding the combination of calcium ion (Ca2+ ) and NS-L. RESULTS: Printing properties, lutein release and antioxidation of printed Ca2+ -NS-L-surimi were determined. The NS-L-surimi with 20 mM kg-1 Ca2+ had the best printing effects (fine accuracy, 99 ± 1%). Compared to NS-L-surimi, the structure became denser after adding Ca2+ , the gel strength, hardness, elasticity, yield stress (τ), water holding capacity of Ca2+ -NS-L-surimi increased by about 17 ± 4%, 3 ± 1%, 9 ± 2%, 20 ± 4%, 40 ± 5% respectively. These enhanced mechanical strength and self-supporting ability to resist binding deformation and improve printing accuracy. Moreover, salt dissolution and increased hydrophobic force by Ca2+ stimulated protein stretching and aggregation, leading to enhancement of gel formation. Decreased printing effects of NS-L-surimi with excessive Ca2+ (> 20 mM kg-1 ) caused by excessive gel strength and τ, leading to strong extrusion force and low extrudability. Additionally, Ca2+ -NS-L-surimi had higher digestibility and lutein release rate (increased from 55 ± 2% to 73 ± 3%), because Ca2+ made NS-L-surimi structure porous, which promoted contact of enzyme-protein. Furthermore, weakened ionic bonds reduced electron binding bondage that combined with released lutein to provide more electrons for enhancing antioxidation. CONCLUSION: Collectively, 20 mM kg-1 Ca2+ could better promote printing process and function exertion of NS-L-surimi, facilitating the application of 3D printed functional surimi. © 2023 Society of Chemical Industry.

Advanced cutting techniques for solid food: Mechanisms, applications, modeling approaches, and future perspectives.

Cutting is an imperative operation in the food-manufacturing factory, separating food into a predefined geometry. A broad range of solid foods, with various components, textures, and structures, pose enormous challenges to conventional cutting strategies. Additionally, the cutting performance is significantly impacted by the processing parameters, wherein trial-and-error or empirical methods are often used to select the parameters in source-wasting and time-consuming ways. Hence, there is a need to accelerate the development of advanced cutting techniques and novel modeling approaches in the food-manufacturing industry. Recently, advanced cutting techniques (ultrasonic vibration-assisted [UVA], laser, and waterjet cutting) are seen to be superior in processing foods of various textures, with the advantages of high cutting quality, low contamination, and easy operation. Compared with conventional cutting, advanced cutting techniques can dramatically reduce cutting force and energy consumption, resulting in high efficiency, energy-and-source saving, and low carbon footprint. Additionally, the finite element (FE) model does simulate the cutting process well, and artificial intelligence (AI) technology is competent to optimize the cutting parameters. This review is perhaps the first one focusing on the advanced cutting techniques applied in the food industry, serving as a summary of the cutting mechanisms, critical influence factors, and applications of conventional and advanced cutting techniques including UVA, laser, and waterjet cutting. In addition, the modeling approaches with respect to FE and AI models are emphasized. Finally, the challenges and future perspectives of advanced cutting techniques combined with modeling approaches are highlighted, and those approaches are promising in the future intelligent food-manufacturing industry. PRACTICAL APPLICATION: The review clearly demonstrates that advanced cutting techniques as having advantages such as high efficiency, energy-and-source saving, and low damages, thus exhibiting great potential in processing food of various textures with high cutting quality, low contamination, and easy operation. Additionally, the FE model does simulate the cutting process well and AI is competent in optimizing the cutting parameters, which possesses great potential in providing comprehensive cutting information and selecting the optimal combination of cutting parameters.

Aptamer and gold nanorod-based fumonisin B1 assay using both fluorometry and SERS.

An aptamer-based assay is presented for the determination of fumonisin B1 (FB1). It is bimodal in that both surface-enhanced Raman spectroscopy (SERS) and fluorometry are applied for quantitation. It makes use of platinum-coated gold nanorod (AuNR) and DNA sequences. The complementary DNA of aptamer (cDNA) against FB1 is immobilized on the surface of AuNR. The aptamer of FB1 modified with Cy5.5 are complementarily hybridized with cDNA. In the absence of FB1, the aptamer and its cDNA associate. In this situation, strong SERS and weak fluorescence signals are obtained. In the presence of FB1, the aptamer disassociates with its cDNA and binds the target. As the concentration of FB1 increases, the SERS and fluorescence signal intensities of the mixture are gradually decreased and increased, respectively. Under optimized conditions, the SERS signal at 1366 cm-1 decreases linearly in the 10-500 pg mL-1 concentration range with the calibration equation of y = 1997lgx-594 (the coefficient of determination is 0.998). The fluorescence signal at 670 nm increases linearly in the 10-250 pg mL-1 concentration range with the calibration equation of y = 500lgx-383 (the coefficient of determination is 0.991). The assay was applied to the determination of FB1 contents in spiked corn samples. The average recoveries ranged from 92 to 107%, confirming the practicality of this method. The results obtained by this assay are in good agreement with that of LC-MS/MS method. Graphical abstractSchematic illustration of a bimodal aptasensor based on surface enhanced Raman scattering (SERS) and fluorescence change for the detection of fumonisin B1 (FB1).

A fluorometric method for aptamer-based simultaneous determination of two kinds of the fusarium mycotoxins zearalenone and fumonisin B1 making use of gold nanorods and upconversion nanoparticles.

An aptamer-based assay for the determination of two different kinds of fusarium mycotoxins, i.e., zearalenone (ZEN) and fumonisin B1 (FB1), is presented. Based on the inner filter effect (IFE) strategy, the contents of ZEN and FB1 can be simultaneously quantified. It is making use of 65-nm gold nanorods (AuNRs), 20-nm upconversion nanoparticles (UCNPs), fluorescence dyes, and DNA sequences. In the absence of ZEN and FB1, the UCNPs and AuNRs associate through DNA sequences. Due to IFE effect, weak fluorescence signals are collected. In the presence of ZEN or FB1, UCNPs and AuNRs become unstable and partially separate from each other. This results in the recovery of fluorescence signals. Under 980-nm laser excitation, the logarithmic values of fluorescence signal intensities at 606 nm and 753 nm gradually increase with the concentration of ZEN and FB1 in the ranges 0.05-100 µg L-1 (the coefficient of determination is 0.997) and 0.01-100 ng L-1 (the coefficient of determination is 0.986), respectively. The limits of detection (LOD) of the fabricated assay for ZEN and FB1 are 0.01 µg L-1 and 0.003 ng L-1, respectively. The proposed method has a high selectivity over other competitive mycotoxins, including aflatoxin B1, ochratoxin A, patulin and ochratoxin B. The applicability of the assay was evaluated in the determination of ZEN and FB1 contents in spiked corn samples. The average recoveries ranged from 89.9 to 106.6%. This result confirms the practicality of this method. Graphical abstract Schematic representation of an aptamer-based fluorometric method for simultaneous determination of two kinds of the fusarium mycotoxins zearalenone and fumonisin B1.

Trimer-based aptasensor for simultaneous determination of multiple mycotoxins using SERS and fluorimetry.

An aptasensor is reported for the detection of three different kinds of mycotoxins, i.e., zearalenone (ZEN), ochratoxin A (OTA), and fumonisin B1 (FB1). Based on fluorescence resonance energy transfer effect (FRET) and surface-enhanced Raman scattering (SERS), the levels of ZEN, FB1, and OTA can be simultaneously determined. Under 980-nm and 650-nm laser excitation, the logarithmic values of fluorescence signal intensities at 543 nm and 670 nm are slowly increased as the concentrations of ZEN and OTA vary from 0.1 ng mL-1 and 0.05 ng mL-1 to 100 ng mL-1 and 25 ng mL-1, respectively. For FB1, under 980-nm laser excitation, the logarithmic value of SERS signal intensity at 1567 cm-1 gradually increases with the concentration of FB1 in the range 0.05-200 pg mL-1 (R2 = 0.996). The detection limits of the proposed assay for ZEN, OTA, and FB1 are 0.03 ng mL-1, 0.01 ng mL-1, and 0.02 pg mL-1, respectively. The selectivity experiment results indicate this assay possesses a high selectivity over other commonly encountered mycotoxins. The average recoveries range from 90 to 107%, revealing satisfactory application potential of the proposed assay. The developed aptasensor will bring bright prospects for research in the field of multiplexed mycotoxine detection. Graphical Abstract Schematic representation of an aptamer-based assay for multiple mycotoxins determination.

Nanostarch-Stimulated Cell Adhesion in 3D Bioprinted Hydrogel Scaffolds for Cell Cultured Meat.

Three-dimensional (3D) bioprinting has great potential in the applications of tissue engineering, including cell culturing meat, because of its versatility and bioimitability. However, existing bio-inks used as edible scaffold materials lack high biocompatibility and mechanical strength to enable cell growth inside. Here, we added starch nanoparticles (SNPs) in a gelatin/sodium alginate (Gel/SA) hydrogel to enhance printing and supporting properties and created a microenvironment for adherent proliferation of piscine satellite cells (PSCs). We demonstrated the biocompatibility of SNPs for cells, with increasing 20.8% cell viability and 36.1% adhesion rate after 5 days of incubation. Transcriptomics analysis showed the mechanisms underlying the effects of SNPs on the adherent behavior of myoblasts. The 1% SNP group had a low gel point and viscosity for shaping with PSCs infusion and had a high cell number and myotube fusion index after cultivation. Furthermore, the formation of 3D muscle tissue with thicker myofibers was shown in the SNP-Gel/SA hydrogel by immunological staining.

Stable cytoactivity of piscine satellite cells in rice bran-gelatin hydrogel scaffold of cultured meat.

In order to achieve high cell adhesion and growth efficiency on scaffolds for cultured meat, animal materials, especially gelatin, are necessary though the disadvantages of weak mechanical properties and poor stability of their hydrogel scaffolds are present during cell cultivation. Here, we use rice bran as a kind of filling and supporting materials to develop a composite scaffold with gelatin for fish cell cultivation, where rice bran is also inexpensive from high yield fibrous agricultural by-product. The rice bran (with a proportion of 1, 3, 5, 7, 10 to 3 of gelatin) could evenly distributed in the three-dimensional network composed of gelatin hydrogel. It contributed to delaying swelling and degradation rates, fixing water and improving elastic modulus. It is important that rice bran-gelatin hydrogel scaffolds (especially the hydrogel with 70 % rice bran, db) promoted piscine satellite cells (PSCs) proliferation effectively compared to the pure gelatin hydrogel, and the former could also support the differentiation of PSCs. Overall, this work showed a positive promotion to explore new source of scaffold materials like agricultural by-product for reducing the cost of cell cultured meat production.

Green fabrication of hierarchical pore starch with controllable pore size and shape based on different amylose-amylopectin ratios.

Porous starch (PS) was widely prepared for its large effective surface area, pore volume, and superior hydrophilic property, but its application is limited by enzyme and chemical use. In this study, a novel method to prepare PS with controllable hierarchical pores through ultrasound-ethanol precipitation and different amylose-amylopectin ratios is proposed. As shown in porous morphology and parameters, there were macropores, mesopores and micropores in the formed PS. Moreover, we found that the content of amylose (AM) was negatively related with the total pore volume and pore diameter in PS. The different surface tensions created through ethanol evaporation and water migration during oven drying are the main mechanisms of forming pores with controllable sizes. Based on the molecular information and the long-/short-range orders reflected by crystalline pattern, lamellas, and single-/double-helices, we conclude that AM is easier to form V-type inclusion complexes with ethanol. More single helix of V-amylose was transformed from B-type polymorph after ethanol exchange, which had significantly broadened dLozentz in PS. The TG spectra proved that the novel PS has the stable thermodynamic property. Overall, the finding of an objective regular between AM and pore sizes of PS in this study may support the other work related to PS.

High-Resistant Starch Based on Amylopectin Cluster via Extrusion: From the Perspective of Chain-Length Distribution and Structural Formation.

Resistant starch (RS) has the advantage of reshaping gut microbiota for human metabolism and health, like glycemic control, weight loss, etc. Among them, RS3 prepared from pure starch is green and safe, but it is hard to achieve structural control. Here, we regulate the crystal structure of starch with different chain-length distributions (CLDs) via extrusion at low/high shearing levels. The change in CLDs in extruded starch was obtained, and their effects on the fine structure (Dm, dBragg, dLorentz, degree of order and double helix, degree of crystal) of RS and its physicochemical properties were investigated by SAXS, FTIR, XRD and 13C NMR analyses. The results showed that the RS content under a 250 r/min extrusion condition was the highest at 61.52%. Furthermore, the crystalline system induced by high amylopectin (amylose ≤ 4.78%) and a small amount of amylose (amylose ≥ 27.97%) was favorable for obtaining a high content of RS3-modified products under the extruding environment. The control of the moderate proportion of the A chains (DP 6-12) in the starch matrix was beneficial to the formation of RS.

Intelligent food tag: A starch-anthocyanin-based pH-sensitive electrospun nanofiber mat for real-time food freshness monitoring.

A starch-based nanofiber mat was prepared for real-time monitoring of food freshness for the first time. UV-vis results showed that roselle anthocyanins (RS) conferred a wide pH sensing range on the nanofiber mat. The prepared nanofiber mats demonstrated good color visibility (total color difference value (ΔE) increased to 56.4 ± 0.7) and a reversible response (within 120 s). Scanning electron microscopy and Fourier transform infrared spectroscopy results suggested that the nanofibers had smooth surfaces without beaded fibers and that RS was well embedded into the nanofibers. The introduction of RS improved the thermal stability of the nanofibers. Color stability tests revealed that the nanofibers exhibited excellent color stability (maximum change ΔE = 1.57 ± 0.03) after 14 days of storage. Pork and shrimp freshness tests verified that the nanofibers could effectively reflect the dynamic freshness of pork and shrimp. Nontoxic, degradable and responsive characteristics make the pH-sensitive nanofiber mat a smart food label with great application potential.

Preparation of starch-based oral fast-disintegrating nanofiber mats for astaxanthin encapsulation and delivery via emulsion electrospinning.

Developing green and efficient delivery systems to promote bioavailability of bioactive ingredients is a sustained demand in food industry. In this work, the astaxanthin (AST)-loaded starch-based fast-dissolving nanofibers with core-shell structure were prepared by emulsion electrospinning technique without using any organic solvent. To load water-insoluble AST in hydrophilic octenyl succinic anhydride starch (OSAS)/polyvinyl alcohol (PVA) nanofiber matrices, AST-loaded nanoscale emulsions (212.19 ±â€¯5.63 nm) with high encapsulation efficiency (91.54 ±â€¯0.14 %) were prepared as a precursor for emulsion electrospinning, using OSAS/PVA aggregates as an emulsifier. The core-shell structure of nanofibers was revealed by the Transmission electron microscopy (TEM), with average diameter of 509.58 ±â€¯12.77 nm, and 88.64 ±â€¯0.49 % for AST were effectively encapsulated in core layer. Nanofiber mats exhibited high encapsulation efficiency (85.11 ±â€¯1.53 %) and excellent storage stability over 7 d. Meanwhile, amorphous transformation of AST enabled it possess higher water solubility, bioaccessibility, and antioxidant properties (97.72 ±â€¯2.17 %) than free AST in aqueous system. The results demonstrated that the green, nontoxic, and biodegradable nanofiber mats prepared by emulsion electrospinning successfully realized the encapsulation and delivery of AST, with broad application prospects in the food and pharmaceutical fields.

Preparation of starch-based green nanofiber mats for probiotic encapsulation by electrospinning.

In this study, starch-based nanofiber mats were successfully prepared from aqueous solution by electrospinning and used for probiotic encapsulation for the first time. The physicochemical properties of the octenylsuccinated (OS) starch/poly(vinyl alcohol) (PVA) blend solutions were systematically investigated. Through Fourier transform infrared spectroscopy and X-ray diffraction spectra analysis, it was found that miscibility and hydrogen bonding interactions exist between OS starch and PVA molecules. Thermogravimetric analysis and derivative thermogravimetric analysis revealed that the produced nanofibers possess satisfactory thermal stability. Scanning electron microscopy images and diameter distribution histograms showed that continuous and defect-free nanofibers were obtained and along with the increase in the weight ratio of OS starch, the average diameter gradually decreased. In addition, it was confirmed that the probiotics were successfully encapsulated in nanofiber mats. The survival rates of Lactobacillus plantarum AB-1 and Lactobacillus rhamnosus GG encapsulated in nanofibers were as high as 94.63% and 92.42%, respectively, significantly higher than those of traditional freeze-drying. Moreover, compared to free cells, probiotics encapsulated in nanofiber mats retained better viability after 21 days of storage at 4 and 25°C, and showed remarkably higher survival rates after exposure to simulated gastric and intestinal fluid. This study showed that the developed nanofibers can be a promising encapsulation system for the protection of probiotics.

Improving structural and functional properties of starch-catechin-based green nanofiber mats for active food packaging by electrospinning and crosslinking techniques.

The hydrophilic and low mechanical properties limited the application of starch-based films. In this work, a hydrophobic starch-based nanofiber mat was first successfully prepared from aqueous solution at room temperature by using electrospinning and glutaraldehyde (GTA) vapor phase crosslinking techniques for active packaging applications. Catechin (CAT) was immobilized in the nanofibers by electrospinning, resulting in higher thermal stability (Tdmax = 315.23 °C), antioxidant (DPPH scavenging activity = 94.31 ± 2.70 %) and antimicrobial (inhibition zone diameter = 15.6 ± 0.3 mm) of the fibers, which further demonstrated hydrogen bonding and electrostatic interaction between CAT and fibers. Nanofibers after GTA vapor phase crosslinking exhibited enhanced hydrophobicity (water contact angle: 15.6 ± 1.5° â†’ 93.5 ± 2.3°) and mechanical properties (tensile strength: 1.82 ± 0.06 MPa â†’ 7.64 ± 0.24 MPa, elastic modulus: 19.35 ± 0.63 MPa â†’ 45.34 ± 0.51 MPa). The results demonstrated that preparation of starch-based electrospun nanofiber mats in aqueous system at room temperature overcame the challenges of organic solvent pollution and thermosensitive material encapsulation, while GTA vapor phase crosslinking technique improved the hydrophobicity and mechanical properties of nanofiber mats, which facilitated the application of starch-based materials in the field of packaging.

Topological polymeric glucosyl nanoaggregates in scaffold enable high-density piscine muscle tissue.

Upon the pressure of conventional land agriculture and marine environment facing the future of human beings, the emerging of alternative proteins represented by cultured meat is expected with a breakthrough of efficient, safe and sustainable production. However, the cell proliferation efficiency and final myofiber density in current animal-derived scaffolds are still limited. Here, we incorporated five plant-derived edible polymeric glucosyl nanoparticles (GNPs) into gelatin/alginate hydrogels to spontaneously form nanoaggregates where nanotopographies were observed inside. The nanoscale topological morphology significantly enhances the adhesion and proliferation efficiencies of piscine satellite cells (PSCs) in the tailored extracellular matrix of as-prepared scaffold. Physically, the presence of GNP-induced nanoaggregate increases the interaction between ITG-A1 (membrane protein of PSCs) and hydrogel microenvironment, which activates the focal adhesion-integrin-cytoskeleton mechanotransduction signaling to promote cell proliferation. With a controlled diameter of hydrogel filament, these inner topological GNP nanoaggregates can also improve the density, alignment and differentiation efficiency of PSCs. When cultured in vitro for 15 days, the cell density, size and orientation of muscle fibers in the GNP-stimulated cultured fish fillet are very similar to the total cell mass in native fish muscle tissue.

Co-encapsulation of hydrophilic and hydrophobic bioactives stabilized in nanostarch-assisted emulsion for inner core gel of coaxial 3D printing.

3D printing technology, especially coaxial 3D mode of multiple-component shaping, has great potential in the manufacture of personalized nutritional foods. However, integrating and stabilizing functional objectives of different natures remains a challenge for 3D customized foods. Here, we used starch nanoparticle (SNP) to assisted soy protein (SPI) emulsion to load hydrophilic and hydrophobic bioactives (anthocyanin, AC, and curcumin, Cur). The addition of SNP significantly improved the storage stability of the emulsion. Xanthan gum (XG) was also added to the SNP/SPI system to enhance its rheology and form an emulsion gel as inner core of coaxial 3D printing. Low field nuclear magnetic resonance and emulsification analyses showed that AC/Cur@SNP/SPI/XG functional inner core had a strong water binding state and good stability. After printing with outer layer, the SNP/SPI coaxial sample had the lowest deviation rate of 0.8 %. Also, SNP/SPI coaxial sample showed higher AC (90.2 %) and Cur (90.8 %) retention compared to pure starch (S), pure SNP, pure SPI, and S/SPI samples as well as SNP/SPI sample printed without outer layer. In summary, this study provides a new perspective for the manufacture of customized products as multifunctional foods, feeds and even potential delivery of drugs.

Characteristic aroma improvement mechanisms of heat-sterilized bayberry juice regulated by exogenous polyphenols.

Bayberry juice is favored for its unique taste and flavor, while heat sterilization tends to reduce the aroma quality during processing, which limits its acceptability to consumers. To address this issue, we use exogenous polyphenols to regulate flavor compounds to improve the product quality. Total 13 differential key aroma-active compounds were identified between fresh bayberry juice (FBJ) and heat-sterilized bayberry juice (HBJ) using aroma extract dilution analysis (AEDA), orthogonal partial least squares-discriminant analysis (OPLS-DA) and odor activity values (OAVs). Further, eight polyphenols were added to investigate their influences on the aroma quality of HBJ respectively. The results showed that all tested polyphenols could maintain the aroma profile of HBJ closer to FBJ and improve the odor preference of HBJ, among which resveratrol and daidzein were most effective. Their aroma molecular regulatory mechanism involved enhancing the characteristic aroma of bayberry and reducing the certain off-flavored compounds produced by heat sterilization.

Hierarchical structural modification of starch via non-thermal plasma: A state-of-the-art review.

The hierarchical architecture of natural and processed starches with different surface and internal structures determines their final physicochemical properties. However, the oriented control of starch structure presents a significant challenge, and non-thermal plasma (cold plasma, CP) has gradually been used to design and tailor starch macromolecules, though without clear illustration. In this review, the multi-scale structure (i.e., chain-length distribution, crystal structure, lamellar structure, and particle surface) of starch is summarized by CP treatment. The plasma type, mode, medium gas and mechanism are also illustrated, as well as their sustainable food applications, such as in food taste, safety, and packaging. The effects of CP on the chain-length distribution, lamellar structure, amorphous zone, and particle surface/core of starch includes irregularity due to the complex of CP types, action modes, and reactive conditions. CP-induced chain breaks lead to short-chain distributions in starch, but this rule is no longer useful when CP is combined with other physical treatments. The degree but not type of starch crystals is indirectly influenced by CP through attacking the amorphous region. Furthermore, the CP-induced surface corrosion and channel disintegration of starch cause changes in functional properties for starch-related applications.

Enhanced fresh-keeping capacity of printed surimi by Ca2+-nano starch-lutein and its nondestructive freshness monitoring based on 4D printed anthocyanin.

To solve undiscernible freshness changes of printed functional surimi while maintaining printed shape, 4D printable color-changing material were prepared. Firstly, based on results of printing properties and fresh-keeping of Ca2+-NS-L-surimi, it showed better printing effects (enhanced mechanical strength) and good preservation (inhibition of amino acids decomposition, bacterial growth). However, freshness changes of printed Ca2+-NS-L-surimi were not distinguished directly. To avoid that, 4D printable color-changing material-anthocyanin-hydroxypropyl methyl cellulose-xanthan gum-carrageenan (AHXK) was prepared for indicating freshness through discoloration. Printing results showed AHX with 5 % K had the most suitable mechanical strength (appropriate gel strength, texture, rheology) for printing. Based on that, AHXK had stable color (ΔE fluctuation <5) and was sensitive to pH and ammonia (obvious discoloration; ΔE > 10). Actual freshness monitoring results (co-printing of AHXK-surimi) exhibited significant discolorations, especially for HXK with 0.75 % A. It became green during refrigeration of 3-5 d (keeping fresh, ΔE < 4), brighter green at 7 d (decreased freshness, ΔE > 6), turned yellow at 9 d (spoilage, ΔE > 16), which were distinguished significantly with naked eyes rather than traditional freshness determining. In conclusion, printed AHXK-functional surimi exhibited good printing, preservation and nondestructive freshness monitoring, facilitating application of 3D printed functional surimi.

Static magnetic field improvement of the quality of rice dumpling subjected to freeze-thaw cycles: Roles of phase transition of water and changes in structural and physicochemical properties of glutinous rice flour.

This study aimed to investigate the effect of static magnetic field (SMF, 0-10 mT) on the quality of rice dumplings subjected to 7, 14, 21, and 28 freeze-thaw cycles. The underlying mechanism was explored by monitoring changes in water phase transition, water distribution, and structural and physicochemical properties of rice flour. Results suggested that SMF enables the formation of small ice crystals by accelerating freezing rate, shortening phase transition time, and increasing bound water content, which attributes to reducing the mechanical damage on starch granules and thus improves the quality of frozen rice dumpling. After 7-28 freeze-thaw cycles, SMF treatment increased the whiteness by 0.08-1.58, reduced the cracking ratio by 1.67 %-8.34 %, decreased the water loss ratio by 0-0.75 %, and significantly improved the texture of cooked rice dumplings. This study confirmed the feasibility of SMF in improving the quality of rice dumpling, which contributes to expanding the applications of magnetic freezer in the preservation of starch-based foods.

Organic solvent-free starch-based green electrospun nanofiber mats for curcumin encapsulation and delivery.

Developing green and efficient methods for the delivery of active food substances is a sustained demand for food scientists and industries. In this work, for the first time, we prepared a curcumin (CUR)-loaded starch-based fast-dissolving nanofiber by electrospinning technology. This green nanofiber was obtained by incorporating CUR with octenyl succinic anhydride starch (OSA) and pullulan (PUL) matrix using pure water as the solvent. To overcome the poor water-solubility and bioavailability of CUR, hydroxypropyl-beta-cyclodextrin (HPßCD) was used to form inclusion complexes. Phase solubility test results showed that by introducing HPßCD, the water-solubility of CUR was obviously improved. The prepared electrospun nanofibers were systematically characterized through scanning electron microscopy (SEM), X-ray diffraction (XRD), proton nuclear magnetic resonance spectroscopy (1H NMR), Fourier transform infrared spectroscopy (FT-IR), differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), encapsulation efficiency testing, solubility testing and antioxidant activity testing. The results demonstrated that CUR was well encapsulated into HPßCD and OSA/PUL/CUR-HPßCD electrospun nanofibers with fine morphology and fast-dissolving character were successfully prepared. It is worth noting that the whole process and raw materials were green, suggesting that the prepared fast-dissolving nanofiber has great application potential in the food and pharmaceutical fields.