ABSTRACT
Airborne particulate matters (PM) pose serious health threats to the population, and efficient filtration is needed for indoor and vehicular environments. However, there is an intrinsic conflict between filtration efficiency, air resistance, and service life. In this study, a two-stage electrostatically assisted air (EAA) filtration device is designed and the efficiency-air resistance-filter life envelope is significantly improved by a thin coating of polydopamine (PDA) on the polyethylene terephthalate (PET) coarse filter by in situ dopamine polymerization. The 8 mm thick EAA PDA-140@PET filter has a high filtration efficiency of 99.48% for 0.3 µm particles, low air resistance of 9.5 Pa at a filtration velocity of 0.4 m s-1 , and steady performance up to 30 d. Compared with the bare PET filter, the penetration rate for 0.3 µm particles is lowered by 20×. The coated PDA is of submicron thickness, 10-3 × the gap distance between filter fibers, so low air resistance could be maintained. The filter shows steadily high filtration efficiency and an acceptable increase of air resistance and holds nearly as many particles as its own weight in a 30 day long-term test. The working mechanism of the EAA coarse filter is investigated, and the materials design criteria are proposed.
Subject(s)
Particulate Matter , Polyethylene Terephthalates , Filtration , Indoles , PolymersABSTRACT
White wastes (unseparated plastics, face masks, textiles, etc.) pose a serious challenge to sustainable human development and the ecosystem and have recently been exacerbated due to the surge in plastic usage and medical wastes from COVID-19. Current recycling methods such as chemical recycling, mechanical recycling, and incineration require either pre-sorting and washing or releasing CO2. In this work, a carbon foam microwave plasma process is developed, utilizing plasma discharge to generate surface temperatures exceeding â¼3000 K in a N2 atmosphere, to convert unsorted white wastes into gases (H2, CO, C2H4, C3H6, CH4, etc.) and small amounts of inorganic minerals and solid carbon, which can be buried as artificial "coal". This process is self-perpetuating, as the new solid carbon asperities grafted onto the foam's surface actually increase the plasma discharge efficiency over time. This process has been characterized by in situ optical probes and infrared sensors and optimized to handle most of the forms of white waste without the need for pre-sorting or washing. Thermal measurement and modeling show that in a flowing reactor, the device can achieve locally extremely high temperatures, but the container wall will still be cold and can be made with cheap materials, and thus, a miniaturized waste incinerator is possible that also takes advantage of intermittent renewable electricity.
Subject(s)
COVID-19 , Refuse Disposal , Carbon , Ecosystem , Humans , Hydrocarbons , Microwaves , SARS-CoV-2ABSTRACT
A systematic theoretical study of the regulating effect of the substituent position on the photoinduced deactivation process of the benzyluracil systems has been performed based on the high-level static electronic structure calculations and on-the-fly full-dimensional excited-state dynamics simulations. Similarities and differences coexist for the two systems by comparative studies on the photoinduced deactivation process of the 5-benzyluracil (5-BU) and 6-benzyluracil (6-BU) systems. They both obey an S2 â S1 â S0 two-step decay pattern, and the decay coordinates of the S2 â S1 and S1 â S0 processes are mainly driven by the elongation of the bridging bond and the out-of-plane ring deformation motion, respectively. However, the puckering motion occurring at the C2 atom in the uracil fragment dominates the decay pathway of the 5-BU system. On the contrary, the puckering motion at the C5 atom in the benzene fragment mainly drives the decay coordinate of the 6-BU system. Therefore, the substituent position could play significant roles in the deactivation process of the benzyluracil systems. Moreover, the S1 â S0 decay process of the 6-BU system consists of five pathways, possessing a more complex deactivation picture than the 5-BU system. The fitted time scale of the puckering motion is compatible with the experimentally observed lifetimes. This work provides a fundamental understanding of the photophysical and photochemical properties of the benzyluracil systems and can give rational suggestions to further design or regulate the bionic molecular systems.
ABSTRACT
Sulfur dioxide (SO2) mitigation and water treatment are two key aspects towards a sustainable environment, and simultaneous achievement of these two goals is extremely attractive. Inspired by the iron ion catalyzed auto-oxidation of aqueous SO2 (i.e., Fe(II)/sulfite process), that generates intermediary sulfate radical able to oxidize organic compounds, we propose a feasible energy-water-environment nexus by using waste SO2 to alleviate water contamination. As a demonstration, electrolysis is used to assist Fe(II)/sulfite (i.e., electro/Fe(II)/sulfite) process to enhance contaminant removals. Results showed 91% of 10 µM ibuprofen (a nonsteroidal anti-inflammatory drug) contaminant at neutral pH was removed, due to sulfate radical oxidation. Synergy mechanisms of electro/Fe(II)/sulfite process were revealed. Moreover, the electro/Fe(II)/sulfite process could effectively degrade contaminants in water bodies from fields, indicating its promising practical application. Energetic analysis indicated that electric treatment cost is 8.65 cent/m3, and is affordable by most water treatment plants. Possible procedures to realize the proposed energy-water-environment nexus were also suggested. The strategy proposed in this study adds new value to the waste produced in energy production and will create renewed interest considering its potential use towards environmental treatment.
ABSTRACT
Efficient hydrogen evolution via electrocatalytic water splitting holds great promise in modern energy devices. Herein, we demonstrate that the localized surface plasmon resonance (LSPR) excitation of Au nanorods (NRs) dramatically improves the electrocatalytic hydrogen evolution activity of CoFe-metal-organic framework nanosheets (CoFe-MOFNs), leading to a more than 4-fold increase of current density at -0.236â V (vs. RHE) for Au/CoFe-MOFNs composite under light irradiation versus in dark. Mechanistic investigations reveal that the hydrogen evolution enhancement can be largely attributed to the injection of hot electrons from AuNRs to CoFe-MOFNs, raising the Fermi level of CoFe-MOFNs, facilitating the reduction of H2 O and affording decreased activation energy for HER. This study highlights the superiority of plasmonic excitation on improving electrocatalytic efficiency of MOFs and provides a novel avenue towards the design of highly efficient water-splitting systems under light irradiation.
ABSTRACT
As one of the most promising energy storage devices, the practical application of lithium-sulfur batteries is limited by the low electrical conductivity of sulfur and the notable "shuttle effects" of sulfur-based electrodes. In this work, we describe a hierarchically porous N-doped zeolitic imidazolate framework-8 (ZIF-8)-derived carbon nanosphere (N-ZDC) with an outer shell and an inner honeycomb-like interconnected nanosheet network as sulfur host material for high-performance and long-term lithium-sulfur batteries. The N-ZDC serves as multilayered barrier against the dissolution of lithium polysulfides. The porously inner interconnected carbon network of the N-ZDC facilitates the electron and ion transportation, ensures a high sulfur loading, and accommodates a volume expansion of the sulfur species. As a result, the optimized N-ZDC4 /S electrodes displayed high initial specific capacities of 1343, 1182, and 698â mAh g-1 at 0.5, 1, and 2â C, respectively, and an ultraslow capacity decay of only 0.048 % per cycle at 2â C over 800 cycles. Even with a high sulfur loading of 3.1â mg cm-2 , N-ZDC4 /S still delivered a reversible capacity of 956â mAh g-1 and stabilizes at 544â mAh g-1 after 500 cycles at 0.5â C, revealing the great potential of the novel carbon nanospheres for energy storage application.
ABSTRACT
This research presents a simple and efficient method to synthesize porous nitrogen-doped carbon microspheres (PNCM) by the carbonization of microporous poly(terephthalaldehyde-pyrrole) organic frameworks (PtpOF). The common KOH activation process is used to tune the porous texture of the PNCM and produce an activated-PNCM (A-PNCM). The PNCM and A-PNCM with specific surface area of 921 and 1303 m(2) g(-1) , respectively, are demonstrated as promising candidates for EDLCs. At a current density of 0.5 A g(-1) , the specific capacitances of the PNCM and A-PNCM are 248 and 282 F g(-1) , respectively. At the relatively high current density of 20 A g(-1) , the capacitance remaining is 95 and 154 F g(-1) , respectively. Capacity retention of the A-PNCM is more than 92% after 10000 charge/discharge cycles at a current density of 2 A g(-1) .
ABSTRACT
A three-dimensional (3D) hierarchical carbon-sulfur nanocomposite that is useful as a high-performance cathode for rechargeable lithium-sulfur batteries is reported. The 3D hierarchically ordered porous carbon (HOPC) with mesoporous walls and interconnected macropores was prepared by in situ self-assembly of colloidal polymer and silica spheres with sucrose as the carbon source. The obtained porous carbon possesses a large specific surface area and pore volume with narrow mesopore size distribution, and acts as a host and conducting framework to contain highly dispersed elemental sulfur. Electrochemical tests reveal that the HOPC/S nanocomposite with well-defined nanostructure delivers a high initial specific capacity up to 1193â mAh g(-1) and a stable capacity of 884â mAh g(-1) after 50â cycles at 0.1â C. In addition, the HOPC/S nanocomposite exhibits high reversible capacity at high rates. The excellent electrochemical performance is attributed exclusively to the beneficial integration of the mesopores for the electrochemical reaction and macropores for ion transport. The mesoporous walls of the HOPC act as solvent-restricted reactors for the redox reaction of sulfur and aid in suppressing the diffusion of polysulfide species into the electrolyte. The "open" ordered interconnected macropores and windows facilitate transportation of electrolyte and solvated lithium ions during the charge/discharge process. These results show that nanostructured carbon with hierarchical pore distribution could be a promising scaffold for encapsulating sulfur to approach high specific capacity and energy density with long cycling performance.
ABSTRACT
Porous nitrogen-doped carbon nanotubes (PNCNTs) with a high specific surface area (1765â m(2) g(-1)) and a large pore volume (1.28â cm(3) g(-1)) have been synthesized from a tubular polypyrrole (T-PPY). The inner diameter and wall thickness of the PNCNTs are about 55â nm and 22â nm, respectively. This material shows extremely promising properties for both supercapacitors and for encapsulating sulfur as a superior cathode material for high-performance lithium-sulfur (Li-S) batteries. At a current density of 0.5â A g(-1), PNCNT presents a high specific capacitance of 210â F g(-1), as well as excellent cycling stability at a current density of 2â A g(-1). When the S/PNCNT composite was tested as the cathode material for Li-S batteries, the initial discharge capacity was 1341â mA h g(-1) at a current rate of 1â C and, even after 50â cycles at the same rate, the high reversible capacity was retained at 933â mA h g(-1). The promising electrochemical energy-storage performance of the PNCNTs can be attributed to their excellent conductivity, large surface area, nitrogen doping, and unique pore-size distribution.
ABSTRACT
Conventional adsorbents and catalysts shaped by granulation or extrusion have high pressure drop and poor flexibility for chemical, energy, and environmental processes. Direct ink writing (DIW), a kind of 3D printing, has evolved into a crucial technique for manufacturing scalable configurations of adsorbents and catalysts with satisfactory programmable automation, highly optional materials, and reliable construction. Particularly, DIW can generate specific morphologies required for excellent mass transfer kinetics, which is essential in gas-phase adsorption and catalysis. Here, DIW methodologies for mass transfer enhancement in gas-phase adsorption and catalysis, covering the raw materials, fabrication process, auxiliary optimization methods, and practical applications are comprehensively summarized. The prospects and challenges of DIW methodology in realizing good mass transfer kinetics are discussed. Ideal components with a gradient porosity, multi-material structure, and hierarchical morphology are proposed for future investigations.
ABSTRACT
The elimination of mercury from polluted water using an effective, cost-economic, and sustainable method was investigated in this work. A modulated multilayer magnetic Hg2+ extractor was prepared with a self-assembly engineering that permitting robust anchoring and uniform distribution of the negatively charged 3D CuxS nanocluster onto a polydopamine (PDA) covered positively strengthened Fe3O4 surface. The developed PAD@Fe3O4 supported copper sulfide composite (CuxS/PAD@Fe3O4) presented an unparalleled Hg2+ uptake performance with adsorption capacity of 1394.61 mg/g (without saturation), and extraordinary selectivity with distribution coefficient value Kd of 17419.2 mL/g. A complexation reaction during Hg2+ affinity was taken place on CuxS/PAD@Fe3O4 surface, and almost no components losses occurring during the adsorption. Furthermore, the as-prepared CuxS/PAD@Fe3O4 micron-adsorbent can be easily magnetic recovery and recycled with hydrochloric acid elution. The purification of 50 L Hg2+ containing wastewater, initial concentration of 20 µg/L can be achieved with CuxS/PAD@Fe3O4 dosage of 0.1 g and treatment cost of 0.077 US $. The outlet Hg2+ concentration met drinking water standard of the United States Environmental Protection Agency. The CuxS/PAD@Fe3O4 magnetic adsorbent can be fabricated cheaply and holds promise for scale-up applications.
Subject(s)
Mercury , Water Pollutants, Chemical , Adsorption , Magnetic Phenomena , Mercury/analysis , Wastewater , Water Pollutants, Chemical/analysisABSTRACT
The 3D nanocomposite structure of plated lithium (LiMetal ) and solid electrolyte interphases (SEI), including a polymer-rich surficial passivation layer (SEI exoskeleton) and inorganic SEI "fossils" buried inside amorphous Li matrix, is resolved using cryogenic transmission electron microscopy. With ether-based DOLDME-LiTFSI electrolyte, LiF and Li2 O nanocrystals are formed and embedded in a thin but tough amorphous polymer in the SEI exoskeleton. The fast Li-stripping directions are along [ 1 ¯ 10 ] or [ 12 1 ¯ ] , which produces eight exposed {111} planes at halfway charging. Full Li stripping produces completely sagging, empty SEI husks that can sustain large bending and buckling, with the smallest bending radius of curvature observed approaching tens of nanometers without apparent damage. In the 2nd round of Li plating, a thin LiBCC sheet first nucleates at the current collector, extends to the top end of the deflated SEI husk, and then expands its thickness. The apparent zero wetting angle between LiBCC and the SEI interior means that the heterogeneous nucleation energy barrier is zero. Due to its complete-wetting property and chemo-mechanical stability, the SEI largely prevents further reactions between the Li metal and the electrolyte, which explains the superior performance of Li-metal batteries with ether-based electrolytes. However, uneven refilling of the SEI husks results in dendrite protrusions and some new SEI formation during the 2nd plating. A strategy to form bigger SEI capsules during the initial cycle with higher energy density than the following cycles enables further enhanced Coulombic efficiency to above 99%.
ABSTRACT
Proton conduction underlies many important electrochemical technologies. A family of new proton electrolytes is reported: acid-in-clay electrolyte (AiCE) prepared by integrating fast proton carriers in a natural phyllosilicate clay network, which can be made into thin-film (tens of micrometers) fluid-impervious membranes. The chosen example systems (sepiolite-phosphoric acid) rank top among the solid proton conductors in terms of proton conductivities (15 mS cm-1 at 25 °C, 0.023 mS cm-1 at -82 °C), electrochemical stability window (3.35 V), and reduced chemical reactivity. A proton battery is assembled using AiCE as the solid electrolyte membrane. Benefitting from the wider electrochemical stability window, reduced corrosivity, and excellent ionic selectivity of AiCE, the two main problems (gassing and cyclability) of proton batteries are successfully solved. This work draws attention to the element cross-over problem in proton batteries and the generic "acid-in-clay" solid electrolyte approach with superfast proton transport, outstanding selectivity, and improved stability for room- to cryogenic-temperature protonic applications.
ABSTRACT
Achieving the greatest cleanup efficiency with minimal footprint remains a paramount goal of the water treatment industry. Toxic organic compounds threaten drinking water safety and require effective pretreatment. Hydroxyl radicals produced by the Fenton process (Fe2+/H2O2) destroy organic contaminants based on their strong oxidation potential. An upgraded reaction using solid catalysts, referred to as the Fenton-like process, was recently adopted to avoid the ferric sludge generation during the conventional Fenton process. However, most heterogeneous Fenton-like catalysts operate optimally at pH 3-5 and quite weakly in near-neutral water bodies. Here, we evaluate the feasibility of an electrolytically localized acid compartment (referred to as the Ella process) produced by electrochemical water splitting under flow-through conditions to facilitate the Fenton-like process. The Ella process boosts the activity of an immobilized iron oxychloride catalyst >10-fold, decomposing organic pollutants at a high flow rate. The robust performance in complex water bodies further highlights the promise of this platform.
ABSTRACT
The solid electrolyte interphase (SEI) dictates the cycling stability of lithium-metal batteries. Here, direct atomic imaging of the SEI's phase components and their spatial arrangement is achieved, using ultralow-dosage cryogenic transmission electron microscopy. The results show that, surprisingly, a lot of the deposited Li metal has amorphous atomic structure, likely due to carbon and oxygen impurities, and that crystalline lithium carbonate is not stable and readily decomposes when contacting the lithium metal. Lithium carbonate distributed in the outer SEI also continuously reacts with the electrolyte to produce gas, resulting in a dynamically evolving and porous SEI. Sulfur-containing additives cause the SEI to preferentially generate Li2 SO4 and overlithiated lithium sulfate and lithium oxide, which encapsulate lithium carbonate in the middle, limiting SEI thickening and enhancing battery life by a factor of ten. The spatial mapping of the SEI gradient amorphous (polymeric â inorganic â metallic) and crystalline phase components provides guidance for designing electrolyte additives.
ABSTRACT
Lithium-metal batteries have been regarded as next-generation high-energy-density candidates beyond lithium-ion batteries. However, the lithium-morphology instabilities accompanied by continuous side reactions with electrolytes inevitably leads to dissatisfactory performances and even safety issues, where the unstable interface between lithium-metal anode and electrolytes has been regarded as the root cause. Artificial solid electrolyte interphase engineering has attracted a lot of attention to stabilize lithium-metal anodes. Here, a novel method with universality is reported to produce the organic-inorganic artificial solid electrolyte interphase. Using poly(propylene carbonate) as a sacrificial matrix, nanoparticles are dispersed on lithium-metal anodes surface uniformly to prepare artificial solid electrolyte interphase, where poly(propylene carbonate) turns into liquid propylene carbonate upon contact with lithium-metal anode. Silicon, Li1.5Al0.5Ge1.5(PO4)3, or Li1.4Al0.4Ti1.6(PO4)3 nanoparticles are coated to suppress lithium-morphology instabilities and demonstrated â¼4 times longer cycle life. Preparing various organic/inorganic artificial solid electrolyte interphase is feasible by introducing various components in the fabrication process of poly(propylene carbonate) membrane, endowing this approach with huge potential in the research of artificial solid electrolyte interphase.
ABSTRACT
Lithium-sulfur batteries are paid much attention owing to their high specific capacity and energy density. However, their practical applications are impeded by poor electrochemical performance due to the dissolved polysulfides. The concentration of soluble polysulfides has a linear relationship with the internal heat generation. The issue of heat transport inside lithium-sulfur batteries is often overlooked. Here, we designed a functional separator that not only had a high thermal conductivity of 0.65 W m-1 K-1 but also alleviated the diffusion of dissolved active materials to the lithium anode, improving the electrochemical performance and safety issue. Lithium-sulfur batteries with the functional separator have a specific capacity of 1,126.4 mAh g-1 at 0.2 C, and the specific capacity can be remained up to 893.5 mAh g-1 after 100 cycles. Pouch Cells with high sulfur loading also showed a good electrochemical performance under a lean electrolyte condition of electrolyte/sulfur (E/S) = 3 µL mg-1.
ABSTRACT
Alternative battery systems based on the chemistry of sodium are being considered to offer sustainability and cost-effectiveness. Herein, a simple and new method is demonstrated to enable nickel hexacyanoferrate (NiHCF) Prussian blue analogues (PBA) nanocrystals to be an excellent host for sodium ion storage by functionalization with redox guest molecule. The method is achieved by using NiHCF PBA powders infiltrated with the 7,7,8,8-tetracyanoquinododimethane (TCNQ) solution. Experimental and ab initio calculations results suggest that TCNQ molecule bridging with Fe atoms in NiHCF Prussian blue analogue leads to electronic coupling between TCNQ molecules and NiHCF open-framework, which functions as an electrical highway for electron motion and conductivity enhancement. Combining the merits including high electronic conductivity, open framework structure, nanocrystal, and interconnected mesopores, the NiHCF/TCNQ shows high specific capacity, fast kinetics and good cycling stability, delivering a high specific capacity of 35 mAh g-1 after 2000 cycles, corresponding a capacity loss of 0.035% decay per cycle.
ABSTRACT
Lithium-sulfur batteries are one of the most promising next-generation batteries due to their high theoretical specific capacity, but are impeded by the low utilization of insulating sulfur, unstable morphology of the lithium metal anode, and transport of soluble polysulfides. Here, by coating a layer of nano titanium dioxide and carbon black onto a commercial polypropylene separator, we demonstrate a new composite separator that can confine the polysulfides on the cathode side, forming a catholyte chamber, and at the same time block the dendritic lithium on the anode side. Lithium-sulfur batteries using this separator show a high initial capacity of 1206 mA h g-1 and a low capacity decay rate of 0.1% per cycle at 0.5C. Analyses reveal the electrocatalytic effect and the excellent dendrite-blocking capability of the â¼7 µm thick coating.
ABSTRACT
Given their high theoretical energy density, lithium-sulfur (Li-S) batteries have recently attracted ever-increasing research interest. However, the dissolution of polysulfides and uncontrolled deposition of insoluble discharge product significantly hinder the cycling stability. Herein, a nanospace-confinement copolymerization strategy for encapsulating polymeric sulfur into porous carbon matrix is presented. The morphologies and sulfur contents of carbon/polymeric sulfur (C/PS) composites could be readily tailored by controlling the copolymerization time. Confining polymeric sulfur in the porous carbon with abundant interparticle pores facilitates rapid electronic/ionic transport and mitigates dissolution of polysulfides intermediates. More importantly, the organic sulfur units dispersed in the insoluble/insulating Li2S2/Li2S phase could prevent its irreversible deposition. Such nanostructure with tailored chemistry property permits the C/PS electrodes to exhibit enhanced cycling stability and high rate capability. The nanospace-confinement copolymerization strategy features general and facial advantages, which may provide new opportunities for the future development of advanced sulfur cathodes.