Interchain-expanded extra-large-pore zeolites.

Stable aluminosilicate zeolites with extra-large pores that are open through rings of more than 12 tetrahedra could be used to process molecules larger than those currently manageable in zeolite materials. However, until very recently1-3, they proved elusive. In analogy to the interlayer expansion of layered zeolite precursors4,5, we report a strategy that yields thermally and hydrothermally stable silicates by expansion of a one-dimensional silicate chain with an intercalated silylating agent that separates and connects the chains. As a result, zeolites with extra-large pores delimited by 20, 16 and 16 Si tetrahedra along the three crystallographic directions are obtained. The as-made interchain-expanded zeolite contains dangling Si-CH3 groups that, by calcination, connect to each other, resulting in a true, fully connected (except possible defects) three-dimensional zeolite framework with a very low density. Additionally, it features triple four-ring units not seen before in any type of zeolite. The silicate expansion-condensation approach we report may be amenable to further extra-large-pore zeolite formation. Ti can be introduced in this zeolite, leading to a catalyst that is active in liquid-phase alkene oxidations involving bulky molecules, which shows promise in the industrially relevant clean production of propylene oxide using cumene hydroperoxide as an oxidant.

Control of Zeolite Local Polarity toward Efficient Xenon/Krypton Separation.

The inherent inertness and striking physicochemical similarities of krypton and xenon pose significant challenges to their separation. Reported herein is the efficient xenon capture and xenon/krypton adsorptive separation by transition metal-free zeolites under ambient conditions. The polarized environment of zeolite, denoted as local polarity, can be tuned by changing the topology, framework composition, and counter-cations, which in turn correlates with the guest-host interaction and separation performance. Chabazite zeolite with a framework Si/Al ratio of 2.5 and Ca2+ as the counter-cations, namely, Ca-CHA-2.5, is developed as a state-of-the-art zeolite adsorbent, showing remarkable performance, i.e., high dynamic xenon uptake, high xenon/krypton separation selectivity, and good recyclability, in the adsorptive separation of the xenon/krypton mixture. Grand Canonical Monte Carlo simulation reveals that extraframework Ca2+ cations act as the primary binding sites for xenon and can stabilize xenon molecules together with the chabazite framework, whereas krypton molecules are stabilized by weak guest-host interaction with the zeolite framework.

Enhancing Stability of SAPO-37 Molecular Sieve through Aluminum Phosphate Utilization: Synthesis, Stability Mechanism, and Catalytic Performance.

SAPO-37 molecular sieve, characterized by its three-dimensional 12-membered-ring FAU structure, has drawn wide attention due to its unique properties and catalytic potential. However, its susceptibility to framework collapse under low-temperature and humid conditions hinders practical applications, affecting both the reaction performance and sample storage. To tackle this, we utilized aluminum phosphate as a precursor for synthesizing SAPO-37, aiming to modify Si incorporation mechanisms and improve P and Al environments. Solid NMR spectroscopy combined with other techniques proves that the resulting SAPO-37-AP has enriched silicon islands, leading to reduced water adsorption, more reversible structural change, and significantly enhanced stability after low-temperature vapor treatment compared to conventional SAPO-37. Remarkably, SAPO-37-AP, after water vapor treatment, still exhibits superior performance in the liquid-phase Beckmann rearrangement reaction. This approach enhances stability, reduces templating agent amounts, and improves the solid product yield, offering promising practical applications.

Unravelling the Crucial of Spatial Al Distribution to Realize Precise Alkali-Treatment for Target Acid-Catalyzed Reactions.

Constructing mesoporous structure within zeolites by alkali-treatment is an effective protocol to improve their diffusion properties. However, undesirable changes in Brönsted acid site (BAS) densities always offset this advantage in acid-catalyzed reactions. In this context, the crucial roles of spatial aluminum distribution were unraveled during alkali-treatment of MFI zeolite and the desirable BAS density was achieved in obtained hierarchical samples for the target reactions. Various characterization methods, particularly the multiple one- and two-dimensional magic-angle-spinning (MAS) NMR techniques, were performed to track the alkali-treatment processes. For the sample with a more uniform spatial Al distribution, more tetrahedral Al sites would fall off and migrate around the Si-OH in zeolite as Al(OH)4-. Those re-deposited Al(OH)4- sites were easily transformed into NMR-invisible Al sites during the calcination process, which contributed negligibly to both Brönsted and Lewis acidities, thus being referred to"acid-free"Al species. While most tetrahedral Al sites were preserved after the alkali-treatment of sample with non-uniform Al distribution and the BAS density gradually increased with treatment time. According to the requirements of typical acid-catalyzed reactions, such as catalytic cracking of 1,3,5-triisopropylbenzene and methanol-to-olefins, the desired hierarchical zeolite catalysts were developed by matching the amounts of extracted Si and generated"acid-free"Al during the precise alkali-treatment.

WRKY55 transcription factor positively regulates leaf senescence and the defense response by modulating the transcription of genes implicated in the biosynthesis of reactive oxygen species and salicylic acid in Arabidopsis.

Reactive oxygen species (ROS) and salicylic acid (SA) are two factors regulating leaf senescence and defense against pathogens. However, how a single gene integrates both ROS and SA pathways remains poorly understood. Here, we show that Arabidopsis WRKY55 transcription factor positively regulates ROS and SA accumulation, and thus leaf senescence and resistance against the bacterial pathogen Pseudomonas syringaeWRKY55 is predominantly expressed in senescent leaves and encodes a transcriptional activator localized to nuclei. Both inducible and constitutive overexpression of WRKY55 accelerates leaf senescence, whereas mutants delay it. Transcriptomic sequencing identified 1448 differentially expressed genes, of which 1157 genes are upregulated by WRKY55 expression. Accordingly, the ROS and SA contents in WRKY55-overexpressing plants are higher than those in control plants, whereas the opposite occurs in mutants. Moreover, WRKY55 positively regulates defense against P. syringae Finally, we show that WRKY55 activates the expression of RbohD, ICS1, PBS3 and SAG13 by binding directly to the W-box-containing fragments. Taken together, our work has identified a new WRKY transcription factor that integrates both ROS and SA pathways to regulate leaf senescence and pathogen resistance.

Real-time evolution dynamics during transitions between different dissipative soliton states in a single fiber laser.

Various dissipative soliton solutions exist in the parameter space of mode-locked fiber lasers, including both coherent and incoherent pulses. Novel ultrafast laser designs can lead to distinctive dissipative soliton solutions formed by unique pulse shaping dynamics in the same cavity. However, transitionary states in between steady-state mode-locked regimes remain largely unexplored. Here, we investigate the intermediate transition dynamics in a versatile Tm-doped fiber laser capable of emitting both dissipative solitons with anomalous-dispersion and normal-dispersion pulse-shaping mechanisms by adjusting an intracavity polarization controller. Real-time pulse dynamics during mode-locking transitions are analyzed with a modified dispersive Fourier transform setup, illustrating characteristic pulse shaping mechanisms typically reserved for different dispersion regimes. Combined with a spectral intensity correlation analysis, the coherence evolution between two distinct mode-locked states is fully resolved for the first time.

Recognizing the Minimum Structural Units Driving the Crystallization of SAPO-34 in a Top-Down Process.

Recognizing the structure and nature of the nuclei for zeolites crystallization on an atomic level is of great importance, which can provide guidance on the control of crystallization kinetics and the rational synthesis of zeolites. However, it remains a long-standing challenge due to the difficulty in characterization of amorphous precursor with limited crystal nuclei. Herein, a top-down synthesis system was designed for SAPO-34 molecular sieve and well investigated. A clear precursor solution with abundant SAPO-34 crystal nuclei was obtained under a depolymerization-dominant condition. The species in the liquid precursor were identified by FT-ICR MS, solid-state MAS NMR and atomic pair distribution function analyses. In combination with various designed experiments, it is revealed that both the formation of small species containing Si-O-Al bonds and reaching a certain concentration, is crucial for driving the crystallization of SAPO-34, rather than structural units with specific spatial conformation. This work provides an important understanding on the (pre)nucleation of SAPO-34 and sheds light on the synthesis control of SAPO molecular sieves.

Noise-like pulse generation and amplification from soliton pulses.

The evolution of soliton pulses into noise-like pulses in a nonlinear fiber externally to the laser oscillator is demonstrated at 1.9 µm, for the first time. Soliton collapse based mechanisms induce noise-like pulses with varying properties as a function of nonlinear fiber length without requiring any laser cavity feedback. The proposed method allows the generation of noise-like pulses with a sub-300 fs spike and sub-40 ps pedestal duration. Power scaling of the noise-like pulses is demonstrated in a double-clad thulium-doped fiber amplifier with amplification up to an average power of 5.19 W, corresponding to a pulse energy of 244 nJ. This method provides an alternative route for generating fully synchronized noise-like pulses and solitons in the same system, without relying on the conventionally used mechanism of changing the intracavity nonlinearity within the laser cavity.

Dynamic Evolution of Aluminum Coordination Environments in Mordenite Zeolite and Their Role in the Dimethyl Ether (DME) Carbonylation Reaction.

Part of tetrahedral framework aluminum in a protonic mordenite (HMOR) will convert geometry to distorted tetrahedral and octahedral coordination. High-field 27 Al NMR data show that more framework Al atoms at T3 and T4 sites change geometry to nonframework structures than others. These nonframework Al species preferentially reside in the side pockets, which will decrease the accessibility of acid sites in the 8-membered ring (MR) channel, impairing the dimethyl ether (DME) carbonylation reaction. The arisen octahedrally coordinated Al species are framework-associated, which can be reverted into the zeolite framework. Herein, we find that a facile treatment with pyridine could force the octahedral coordination Al back into a tetrahedral environment, which could increase the number of available active sites and enhance the diffusion of DME, thus improving the reactivity (4 times) of the DME carbonylation reaction and prolonging the lifetime of catalysts.

Increasing the Number of Aluminum Atoms in T3 Sites of a Mordenite Zeolite by Low-Pressure SiCl4 Treatment to Catalyze Dimethyl Ether Carbonylation.

Controlling the location of aluminum atoms in a zeolite framework is critical for understanding structure-performance relationships of catalytic reaction systems and tailoring catalyst design. Herein, we report a strategy to preferentially relocate mordenite (MOR) framework Al atoms into the desired T3 sites by low-pressure SiCl4 treatment (LPST). High-field 27 Al NMR was used to identify the exact location of framework Al for the MOR samples. The results indicate that 73 % of the framework Al atoms were at the T3 sites after LPST under optimal conditions, which leads to controllably generating and intensifying active sites in MOR zeolite for the dimethyl ether (DME) carbonylation reaction with higher methyl acetate (MA) selectivity and much longer lifetime (25 times). Further research reveals that the Al relocation mechanism involves simultaneous extraction, migration, and reinsertion of Al atoms from and into the parent MOR framework. This unique method is potentially applicable to other zeolites to control Al location.

Realizing Fast Synthesis of High-Silica Zeolite Y with Remarkable Catalytic Performance.

High-silica zeolite Y (FAU) plays a vital role in (petro)chemical industries. However, the slow nucleation and growth kinetics of the high-silica FAU framework limit its direct synthesis and the improvement of framework SiO2 /Al2 O3 ratio (SAR). Here, a facile strategy is developed to realize the fast crystallization of high-silica zeolite Y, which involves the combination of high crystallization temperature, ultra-stable Y (USY) seeds and efficient organic-structure directing agent (OSDA). The synthesis can be finished in 5-16 h at 160 °C and with tunable SAR up to 18.2, and the key factors affecting crystallization kinetics and phase purity are elucidated. Moreover, the crystallization process was monitored to reveal the fast crystal growth mechanism. The high-silica products possess high (hydro)thermal stability and abundant strong acid sites, which endow them excellent catalytic cracking performance, obviously superior to commercial USY.

Molecular Routes of Dynamic Autocatalysis for Methanol-to-Hydrocarbons Reaction.

The industrially important methanol-to-hydrocarbons (MTH) reaction is driven and sustained by autocatalysis in a dynamic and complex manner. Hitherto, the entire molecular routes and chemical nature of the autocatalytic network have not been well understood. Herein, with a multitechnique approach and multiscale analysis, we have obtained a full theoretical picture of the domino cascade of autocatalytic reaction network taking place on HZSM-5 zeolite. The autocatalytic reaction is demonstrated to be plausibly initiated by reacting dimethyl ether (DME) with the surface methoxy species (SMS) to generate the initial olefins, as evidenced by combining the kinetic analysis, in situ DRIFT spectroscopy, 2D 13C-13C MAS NMR, electronic states, and projected density of state (PDOS) analysis. This process is operando tracked and visualized at the picosecond time scale by advanced ab initio molecular dynamics (AIMD) simulations. The initial olefins ignite autocatalysis by building the first autocatalytic cycle-olefins-based cycle-followed by the speciation of methylcyclopentenyl (MCP) and aromatic cyclic active species. In doing so, the active sites accomplish the dynamic evolution from proton acid sites to supramolecular active centers that are experimentally identified with an ever-evolving and fluid feature. The olefins-guided and cyclic-species-guided catalytic cycles are interdependently linked to forge a previously unidentified hypercycle, being composed of one "selfish" autocatalytic cycle (i.e., olefins-based cycle with lighter olefins as autocatalysts for catalyzing the formation of olefins) and three cross-catalysis cycles (with olefinic, MCP, and aromatic species as autocatalysts for catalyzing each other's formation). The unraveled dynamic autocatalytic cycles/network would facilitate the catalyst design and process control for MTH technology.

Generating Assembled MFI Nanocrystals with Reduced b-Axis through Structure-Directing Agent Exchange Induced Recrystallization.

Controlling crystal size and shape of zeolitic materials is an effective way to promote their mass transport and catalytic properties. Herein, we report a single step, Na+ - and porogen- free crystallization of MFI hierarchical architecture made up of aligned nanocrystals with reduced b-axis thickness (5-23 nm) and adjustable Si/Al ratios between 35 to 120, employing the commonly used tetrapropylammonium hydroxide (TPAOH) and tetrabutylammonium hydroxide (TBAOH) as structure-directing agents (SDAs). Homogeneous nucleation driven by both SDAs and subsequent SDA-exchange induced dissolution-recrystallization are responsible for the formation of such structure. The enhanced textural and diffusion properties account for a notable exaggeration of propene selectivity and catalyst lifetime in dimethyl ether-to-olefins (DTO) conversion. This protocol is extendable to the rational synthesis of other hierarchical zeolites through crystallization process control.

Targeting BAX ubiquitin-binding sites reveals that BAX activation is essential for its ubiquitin-dependent degradation.

BAX is an important proapoptotic protein of the BCL-2 family, and its stability is essential for the regulation of the mitochondrial apoptotic pathway. A previous study revealed that BAX could undergo degradation through the ubiquitin-proteasome pathway. In this study, we identified two lysine sites, K21 and K123, that were critical ubiquitin-binding sites in BAX. Mutation of these two sites prolonged the half-life of BAX and also affected its proapoptotic ability. Intriguingly, we found that ABT-737, a BCL-2 inhibitor, significantly enhanced TRAIL-induced BAX degradation in HCT116 cells and increased TRAIL-induced apoptosis in the HCT116 only with the BAX K21R/K123R mutant, not other BAX mutants. In addition, overexpression of PARKIN, an E3 ubiquitin ligase targeting BAX, dramatically decreased BAX protein level when only treated with ABT-737 in HCT116 cells. Therefore, we speculated that BAX activation is essential for its ubiquitin-dependent degradation.

Enhanced Propene/Propane Separation by Directional Decoration of the 12-Membered Rings of Mordenite with ZIF Fragments.

Propene/propane separation is challenging due to the very small difference in molecular sizes, boiling points and condensabilities between these molecules. Herein, we report a strategy of introducing ZIF fragments into traditional mordenite (MOR) zeolite to decorate the 12-membered ring of MOR. After decoration, the originally ineffective zeolite MOR exhibited high kinetic propene/propane selectivities (139 at 25 °C) and achieved efficient propene/propane separation. The propene/propane separation potentials of the resulting adsorbents were further confirmed by breakthrough experiments with equimolar propene/propane (50/50) mixtures.

Ultrafast Semi-Solid Processing of Highly Durable ZIF-8 Membranes for Propylene/Propane Separation.

ZIF-8 membranes have emerged as the most promising candidate for propylene/propane (C3 H6 /C3 H8 ) separation through its precise molecular sieving characteristics. The poor reproducibility and durability, and high cost, thus far hinder the scalable synthesis and industrial application of ZIF-8 membranes. Herein, we report a semi-solid process featuring ultrafast and high-yield synthesis, and outstanding scalability for reproducible fabrication of ZIF-8 membranes. The membranes show excellent C3 H6 /C3 H8 separation performance in a wide temperature and pressure range, and remarkable stability over 6 months. The ZIF-8 membrane features dimethylacetamide entrapped ZIF-8 crystals retaining the same diffusion characteristics but offering enhanced adsorptive selectivity for C3 H6 /C3 H8 . The ZIF-8 membrane was prepared on a commercial flat-sheet ceramic substrate. A prototypical plate-and-frame membrane module with an effective membrane area of about 300 cm2 was used for efficient C3 H6 /C3 H8 separation.

Water-Induced Structural Dynamic Process in Molecular Sieves under Mild Hydrothermal Conditions: Ship-in-a-Bottle Strategy for Acidity Identification and Catalyst Modification.

Water is the most important substance in nature. Imitating the formation of natural materials, molecular sieves have been synthesized under hydrothermal conditions and applied in industry. Herein, we reveal an unforeseen observation on a very special water-induced structural dynamic process of these materials. Dynamic and reversible breaking and forming of T-O-T bonds in silicoaluminophosphate (SAPO) occurs through interactions between gaseous water and the molecular-sieve framework under mild hydrothermal conditions and is confirmed by detection of the incorporation of 17 O from H2 17 O into molecular-sieve framework. Encapsulation of the bulky molecules trimethylphosphine and pyridine (kinetic diameters much larger than the pore size of SAPO-34) into CHA cavities consolidated the water-induced dynamic process. Consequently, new insights into the dynamic features of molecular sieves in water are provided. The ship-in-a-bottle strategy based on these findings also open new fields for fine acidity identification and gives extra boost in shape-selective catalysis.

Electrolyte Solvation Manipulation Enables Unprecedented Room-Temperature Calcium-Metal Batteries.

Calcium-metal batteries (CMBs) provide a promising option for high-energy and cost-effective energy-storage technology beyond the current state-of-the-art lithium-ion batteries. Nevertheless, the development of room-temperature CMBs is significantly impeded by the poor reversibility and short lifespan of the calcium-metal anode. A solvation manipulation strategy is reported to improve the plating/stripping reversibility of calcium-metal anodes by enhancing the desolvation kinetics of calcium ions in the electrolyte. The introduction of lithium salt changes the electrolyte structure considerably by reducing coordination number of calcium ions in the first solvation shell. As a result, an unprecedented Coulombic efficiency of up to 99.1 % is achieved for galvanostatic plating/stripping of the calcium-metal anode, accompanied by a very stable long-term cycling performance over 200 cycles at room temperature. This work may open up new opportunities for development of practical CMBs.

Mapping the dynamics of methanol and xenon co-adsorption in SWNTs by in situ continuous-flow hyperpolarized 129Xe NMR.

A comparative study of the adsorption and desorption processes of methanol in two kinds of nanochannels (i.e. MCM-41 and SWNTs) is performed by in situ continuous-flow laser-hyperpolarized 129Xe NMR. The high sensitivity and short acquisition time of hyperpolarized 129Xe allow for probing the molecular dynamics in a confined geometry under real working conditions. Hyperpolarized 129Xe NMR spectra indicate that the methanol adsorption behavior in nanochannels is determined by the characters of adsorption sites and that the methanol adsorption rate in the nanochannels of SWNTs is faster than in MCM-41. The experimental data shown in this work also indicate that there is a change in gas phase 129Xe NMR signal intensity during the adsorption and desorption of methanol in SWNTs. This may be because there is a strong depolarization of hyperpolarized 129Xe in SWNTs.

Decorated Traditional Zeolites with Subunits of Metal-Organic Frameworks for CH4 /N2 Separation.

Metal-organic frameworks (MOF) materials are promising materials for gas separation, but their application still faces various challenges. A strategy is now reported for introducing subunits of MOFs into traditional zeolite frameworks to obtain applicable adsorbents with advantages of both zeolites and MOFs. The subunits of ZIFs were introduced into zeolite Y and zeolite ZSM-5 for CH4 /N2 separation. Both the molecular simulation and experimental results validated that the IAST CH4 /N2 selectivity of the resulting samples greatly improved (above 8, at 100 kPa and 25 °C) with the incorporation of ZIF subunits into zeolites structure, and the selectivities were obviously higher than that of zeolites and even better than that of ZIFs. This strategy not only gave rise to an efficient adsorbent for CH4 /N2 separation but also provided ideas for design of other adsorption and separation materials.