ABSTRACT
A model based on carrier rate equations is proposed to evaluate the gain saturation and predict the dependence of the output power of a terahertz master-oscillator power-amplifier quantum cascade laser (THz-MOPA-QCL) on the material and structure parameters. The model reveals the design rules of the preamplifier and the power extractor to maximize the output power and the wall-plug efficiency. The correction of the model is verified by its agreement with the experiment results. The optimized MOPA devices exhibit single-mode emission at â¼ 2.6 THz with a side mode suppression ratio of 23 dB, a pulsed output power of 153 mW, a wall-plug efficiency of 0.22%, and a low divergence angle of â¼6°×16°, all measured at an operation temperature of 77 K. The model developed here is helpful for the design of MOPA devices and semiconductor optical amplifiers, in which the active region is based on intersubband transitions.
ABSTRACT
A terahertz master-oscillation power-amplifier quantum cascade laser (THz-MOPA-QCL) is demonstrated where a grating coupler is employed to efficiently extract the THz radiation. By maximizing the group velocity and eliminating the scattering of THz wave in the grating coupler, the residue reflectivity is reduced down to the order of 10-3. A buried DFB grating and a tapered preamplifier are proposed to improve the seed power and to reduce the gain saturation, respectively. The THz-MOPA-QCL exhibits single-mode emission, a single-lobed beam with a narrow divergence angle of 18° × 16°, and a pulsed output power of 136 mW at 20 K, which is 36 times that of a second-order DFB laser from the same material.
ABSTRACT
In this work, we report on a quartz-enhanced photoacoustic spectroscopy (QEPAS) sensor for hydrogen sulfide (H2S) detection, exploiting a liquid-nitrogen-cooled THz quantum cascade laser (QCL) operating in pulsed mode. The spectrophone was designed to accommodate a THz QCL beam and consisted of a custom quartz tuning fork with a large prong spacing, coupled with acoustic resonator tubes. The targeted rotational transition falls at 2.87 THz (95.626 cm-1), with a line-strength of 5.53 â 10-20 cm/mol. A THz QCL peak power of 150 mW was measured at a heat sink temperature of 81 K, pulse width of 1 µs and repetition rate of 15.8 kHz. A QEPAS record sensitivity for H2S detection in the THz range of 360 part-per-billion in volume was achieved at a gas pressure of 60 Torr and 10 s integration time.