ABSTRACT
Doxorubicin (DOX) is an important drug for cancer treatment, but its clinical application is limited due to its toxicity and side effects. Therefore, detecting the concentration of DOX during treatment is crucial for enhancing efficacy and reducing side effects. In this study, the authors developed a biophotonic fiber sensor based on localized surface plasmon resonance (LSPR) with the multimode fiber (MMF)-four core fiber (FCF)-seven core fiber (SCF)-MMF-based direct-taper and anti-taper structures for the specific detection of DOX. Compared to other detection methods, it has the advantages of high sensitivity, low cost, and strong anti-interference ability. In this experiment, multi-walled carbon nanotubes (MWCNTs), cerium-oxide nanorods (CeO2-NRs), and gold nanoparticles (AuNPs) were immobilized on the probe surface to enhance the sensor's biocompatibility. MWCNTs and CeO2-NRs provided more binding sites for the fixation of AuNPs. By immobilizing AuNPs on the surface, the LSPR was stimulated by the evanescent field to detect DOX. The sensor surface was functionalized with DOX aptamers for specific detection, enhancing its specificity. The experiments demonstrated that within a linear detection range of 0-10 µM, the sensitivity of the sensor is 0.77 nm/µM, and the limit of detection (LoD) is 0.42 µM. Additionally, the probe's repeatability, reproducibility, stability, and selectivity were evaluated, indicating that the probe has high potential for detecting DOX during cancer treatment.
Subject(s)
Doxorubicin , Gold , Metal Nanoparticles , Surface Plasmon Resonance , Doxorubicin/pharmacology , Humans , Surface Plasmon Resonance/instrumentation , Gold/chemistry , Metal Nanoparticles/chemistry , Neoplasms/drug therapy , Nanotubes, Carbon/chemistry , Biosensing Techniques/instrumentation , Optical Fibers , Equipment Design , Antibiotics, Antineoplastic/analysis , Cerium/chemistry , Fiber Optic Technology/instrumentationABSTRACT
Yb-doped sesquioxides represent one of the most excellent laser crystals applying for high-power ultrafast lasers owing to their very high thermal conductivities and broadband emission spectra. Pumped by a high-brightness Yb-fiber laser at 976â nm, the Yb:Lu2O3 laser delivers a maximum output power that amounts to 3.55â W in the continuous-wave regime with an optical efficiency of 75%. In the mode-locked regime, 90-fs pulses were generated via soft-aperture Kerr-lens mode-locking at 1080.6â nm with an average output power of 2.85â W, which corresponds to an optical efficiency of 60.3% and a slope efficiency of 68.8%. Average output power of the mode-locked Yb:Lu2O3 laser can be further scaled to 3.05â W at the expense of the pulse duration (178â fs), which corresponds to an optical efficiency as high as 64.5%. To the best of our knowledge, it is the highest optical efficiency ever reported from any solid-state Kerr-lens mode-locked Yb lasers.
ABSTRACT
CD38 is involved in immune responses, cell proliferation, and has been identified in the brain, where it is implicated in inflammation processes and psychiatric disorders. We hypothesized that dysfunctional CD38 activity in the brain may contribute to the pathogenesis of depression. To investigate the underlying mechanisms, we used a lipopolysaccharide (LPS)-induced depression-like model and conducted behavioral tests, molecular and morphological methods, along with optogenetic techniques. We microinjected adeno-associated virus into the hippocampal CA3 region with stereotaxic instrumentation. Our results showed a marked increase in CD38 expression in both the hippocampus and cortex of LPS-treated mice. Additionally, pharmacological inhibition and genetic knockout of CD38 effectively alleviated neuroinflammation, microglia activation, synaptic defects, and Sirt1/STAT3 signaling, subsequently improving depression-like behaviors. Moreover, optogenetic activation of glutamatergic neurons of hippocampal CA3 reduced the susceptibility of mice to depression-like behaviors, accompanied by reduced CD38 expression. We also found that (R)-ketamine, which displayed antidepressant effects, was linked to its anti-inflammatory properties by suppressing increased CD38 expression and reversing synaptic defects. In conclusion, hippocampal CD38 is closely linked to depression-like behaviors in an inflammation model, highlighting its potential as a therapeutic target for antidepressant development.
Subject(s)
ADP-ribosyl Cyclase 1 , Depression , Ketamine , Animals , Mice , Antidepressive Agents/pharmacology , Antidepressive Agents/therapeutic use , Antidepressive Agents/metabolism , Depression/metabolism , Hippocampus/metabolism , Inflammation/metabolism , Ketamine/pharmacology , Ketamine/therapeutic use , Ketamine/metabolism , Lipopolysaccharides/pharmacology , Lipopolysaccharides/metabolism , ADP-ribosyl Cyclase 1/metabolismABSTRACT
BACKGROUND: Although Huaier granules can be used as prospective anti-cholangiocarcinoma drugs, the mechanism of action of Huaier granules in cholangiocarcinoma is not clear. The anti-cholangiocarcinoma effect of Huaier granules was validated in cell line research. In vitro experiments were conducted to investigate the signalling pathways affected by Huaier in CCA cells. METHODS AND RESULTS: Real-time quantitative PCR (RTâqPCR) and Western blot analysis were performed to analyse gene expression in CCA cells. MTT assays, scratch tests, and Transwell assays were used to explore the effects on the proliferation and metastasis of CCA cells. Chromatin immunoprecipitation assays were performed to reveal the potential underlying mechanisms involved. Twist1 was upregulated in human CCA tissues. In addition, its expression levels were negatively related to FBP1 expression levels. Mechanistically, Twist1 can bind to the region of the FBP1 promoter to reduce its expression. Huaier plays an indispensable role in suppressing Twist1 expression to inhibit the Twist1/FBP1/Wnt/ß-catenin axis. Then, we verified the effect of Huaier in vitro. CONCLUSIONS: These findings suggested that Huaier granules were capable of inhibiting CCA development through regulating the Twist1/FBP1/Wnt/ß-catenin signalling axis and provided a novel orientation for the development of novel anti-CCA drugs.
Subject(s)
Bile Duct Neoplasms , Cell Proliferation , Cholangiocarcinoma , Gene Expression Regulation, Neoplastic , Nuclear Proteins , Twist-Related Protein 1 , Wnt Signaling Pathway , beta Catenin , Humans , Twist-Related Protein 1/metabolism , Twist-Related Protein 1/genetics , Cholangiocarcinoma/metabolism , Cholangiocarcinoma/genetics , Cholangiocarcinoma/pathology , Cholangiocarcinoma/drug therapy , Wnt Signaling Pathway/drug effects , Nuclear Proteins/metabolism , Nuclear Proteins/genetics , Cell Line, Tumor , Bile Duct Neoplasms/metabolism , Bile Duct Neoplasms/genetics , Bile Duct Neoplasms/pathology , Gene Expression Regulation, Neoplastic/drug effects , Cell Proliferation/drug effects , beta Catenin/metabolism , Cell Movement/drug effects , Cell Movement/geneticsABSTRACT
Yb-doped fluoride has been demonstrated to be potential crystals for application in efficient ultrafast lasers. However, the trade-off between the shorter pulses with higher efficiencies is a challenge. In this work, using Y b,G d:C a S r F 2 crystal, we report on a sub-50-fs Kerr-lens mode-locked oscillator with an optical efficiency up to 44%. Pumped by a 976-nm diffraction-limited fiber laser and using chirped mirrors combined with prism pairs for the dispersion compensation, a pulse as short as 46 fs was obtained with 620-mW output power, corresponding to an optical efficiency more than 40%. Stable Kerr-lens mode-locking with RMS of output power lower than 0.3% and beam quality factors M 2<1.14 were achieved. Moreover, a maximum output power of 780 mW was obtained in continuous-wave operation with 55.3% optical efficiency. To the best of our knowledge, the results in this work represent the shortest pulses generated from Yb-doped fluoride lasers as well as the highest optical efficiencies ever reported in sub-100 fs Yb bulk lasers.
ABSTRACT
In this work, authors have developed a portable, sensitive, and quick-response fiber optic sensor that is capable of detection of Aflatoxins B1 (AFB1) quantitatively and qualitatively. Using multi-mode fiber (MMF) and multi-core fiber (MCF), the MMF-MCF-MCF-MMF fiber structure based on symmetric transverse offset splicing and waist-expanded taper is fabricated. The evanescent waves are enhanced to form a strong evanescent field by etching the fiber surface with hydrofluoric acid. To successfully excite the localized surface plasmon resonance phenomenon, gold nanoparticles are deposited on the optical fiber probe's surface. Further, to modify the fiber optic probes, Niobium carbide (Nb2CTx) MXene and AFB1 antibodies are functionalized. Nb2CTx MXene is employed to strengthen the biocompatibility of the sensor and increase the specific surface area of the fiber probe, while AFB1 antibody is used to identify AFB1 micro-biomolecules in a specific manner. The reproducibility, reusability, stability, and selectivity of the proposed fiber probe are tested and validated using various concentration of AFB1 solutions. Finally, the linear range, sensitivity, and limit of detection of the sensing probe are determined as 0 - 1000â nM, 11.7â nm/µM, and 26.41â nM, respectively. The sensor offers an indispensable technique, low-cost solution and portability for AFB1-specific detection in agricultural products and their byproducts with its novel optical fiber structure and superior detecting capability. It is also useful for marine species like fish and consequently affecting health of human body.
Subject(s)
Aflatoxin B1 , Metal Nanoparticles , Humans , Aflatoxin B1/analysis , Gold/chemistry , Metal Nanoparticles/chemistry , Reproducibility of Results , Surface Plasmon ResonanceABSTRACT
Histamine is a biologically active molecule that serves as a reliable predictor of the quality of fish. In this work, authors have developed a novel humanoid-shaped tapered optical fiber (HTOF) biosensor based on the localized surface plasmon resonance (LSPR) phenomenon to detect varying histamine concentrations. In this experiment, a novel and distinctive tapering structure has been developed using a combiner manufacturing system and contemporary processing technologies. Graphene oxide (GO)/multi-walled carbon nanotubes (MWCNTs) are immobilized on the HTOF probe surface to increase the biocompatibility of biosensor. In this instance, GO/MWCNTs are deployed first, then gold nanoparticles (AuNPs). Consequently, the GO/MWCNTs help to give abundant space for the immobilization of nanoparticles (AuNPs in this case) as well as increase surface area for the attachment of biomolecules to the fiber surface. By immobilizing AuNPs on the surface of the probe, the evanescent field can stimulate the AuNPs and excite the LSPR phenomena for sensing the histamine. The surface of the sensing probe is functionalized with diamine oxidase enzyme in order to enhance the histamine sensor's particular selectivity. The proposed sensor is demonstrated experimentally to have a sensitivity of 5.5â nm/mM and a detection limit of 59.45 µM in the linear detection range of 0-1000 µM. In addition, the probe's reusability, reproducibility, stability, and selectivity are tested; the results of these indices show that the probe has a high application potential for detecting histamine levels in marine products.
Subject(s)
Biosensing Techniques , Metal Nanoparticles , Nanotubes, Carbon , Animals , Nanotubes, Carbon/chemistry , Gold/chemistry , Histamine , Optical Fibers , Reproducibility of Results , Metal Nanoparticles/chemistry , Biosensing Techniques/methodsABSTRACT
In this work, we introduce a novel multimode fiber (MMF) - seven core fiber (SCF) - MMF (MCM) optical fiber biosensor, also known as the WaveFlex biosensor (plasma wave assisted fiber biosensor), based on localized surface plasmon resonance (LSPR) for qualitative detection of xanthine. Xanthine is a purine base widely distributed in human blood and tissues, and commonly used as an indicator for various disease detections. The MCM sensor incorporates a tapered optical fiber structure, fabricated using the combiner manufacturing system (CMS), and is designed with SCF and MMF. By effectively harnessing LSPR, the sensor boosts the attachment points of biomolecules on the probe surface through immobilized tungsten disulfide (WS2)-thin layers, gold nanoparticles (AuNPs), and carbon nitride quantum dots (C3N-QDs). The functionalization of xanthine oxidase (XO) on the sensing probe further enhances the sensor's specificity. The proposed WaveFlex biosensor exhibits a remarkable sensitivity of 3.2â nm/mM and a low detection limit of 96.75 µM within the linear detection range of 100 - 900 µM. Moreover, the sensor probe demonstrates excellent reusability, reproducibility, stability, and selectivity. With its sensitivity, biocompatibility, and immense potential for detecting human serum and fish products, this WaveFlex biosensor presents a promising platform for future applications.
Subject(s)
Biosensing Techniques , Metal Nanoparticles , Animals , Humans , Gold/chemistry , Xanthine , Reproducibility of Results , Metal Nanoparticles/chemistry , Surface Plasmon ResonanceABSTRACT
The development of signal enhancement technology in optical fiber biosensors is beneficial for the accurate measurement of low-concentration samples. Here, a localized surface plasmon resonance (LSPR)-based fiber biosensor combining a slide-type fiber structure (thus named WaveFlex Biosensor) and low-dimensional materials is proposed for alpha-fetoprotein (AFP) detection. A symmetric transverse offset splicing technology was used to fabricate the multi-mode fiber (MMF-multi-core fiber (MCF)-MMF structure. Furthermore, the MMF on one side was prepared into an S-taper, forming a slide-type fiber structure to generate more energy leakage. The LSPR signal generated by gold nanoparticles (AuNPs) was enhanced by the CeO2 NPs and C3N quantum dots functionalized on the fiber probe. The excellent performance of NPs was conducive to improving the sensitivity of the WaveFlex biosensor and enabling the rapid detection of samples. An AFP antibody was used to identify AFP micro-biomolecules in a specific manner. Based on the combination of the above two methods, the developed fiber probe was applied to detect AFP, and the sensitivity and limit of detection were 32â pm/(ng/mL) and 6.65â ng/mL, respectively. The experimental results demonstrate that the signal-enhanced AFP WaveFlex biosensor has great potential for the rapid and accurate detection of AFP.
Subject(s)
Biomedical Enhancement , Metal Nanoparticles , alpha-Fetoproteins , Gold , Surface Plasmon ResonanceABSTRACT
Long non-coding RNAs (lncRNAs) play important roles in many pathophysiological processes, including cancer progression. Namely, lncRNA Receptor-tyrosine-kinase-like orphan receptor-1 antisense 1 (ROR1-AS1) is crucial for cancer occurrence and progression in organs such as the liver or bladder. However, its expression and role in cholangiocarcinoma (CCA) have not been thoroughly explored.Firstly, we assessed cell viability, proliferation, invasion, and migration using three cell lines (HuCCT-1, QBC399, and RBE) to explore the biological characteristics of ROR1-AS1 in CCA. Secondly, to determine the in vivo effect of ROR1-AS1 on tumor growth, ROR1-AS1 knockdown (KD) HuCCT-1 cells were subcutaneously injected into nude mice to evaluate tumor growth. Finally, we conducted a bioinformatic analysis to confirm the role of ROR1-AS1 in the prognosis and immunity of CCA.In this study, we found that lncRNA ROR1-AS1 was increased in CCA samples and patients with higher ROR1-AS1 expression had a shorter overall survival period. siRNA-mediated KD of ROR1-AS1 significantly reduced cell proliferation and inhibited the migration of CCA cells. In addition, ROR1-AS1 KD HuCCT-1 cells injected into nude mice grew slower than normal CCA cells.In summary, our results show that ROR1-AS1 can promote CCA progression and might serve as a new target for diagnosis and treatment of CCA.
Subject(s)
Bile Duct Neoplasms , Cholangiocarcinoma , MicroRNAs , RNA, Long Noncoding , Animals , Mice , Humans , Mice, Nude , Cell Line, Tumor , RNA, Long Noncoding/genetics , RNA, Long Noncoding/metabolism , Cell Movement/genetics , MicroRNAs/genetics , Neoplastic Processes , Cholangiocarcinoma/pathology , Cell Proliferation/genetics , Bile Duct Neoplasms/pathology , Bile Ducts, Intrahepatic/pathology , Gene Expression Regulation, Neoplastic , Receptor Tyrosine Kinase-like Orphan Receptors/genetics , Receptor Tyrosine Kinase-like Orphan Receptors/metabolismABSTRACT
In this work, the fabrication method of a U-shaped optical fiber (UOF) structure using single-mode fiber is proposed. Few UOF sensors have been developed to date, but the fabrication process has not been described in detail. Here, its subsequent homemade fabrication, optimization strategies, and analysis are thoroughly explored. Further, the influence of transmission on U-shaped diameter is explored. The transmitted intensity is mainly used to assess the strength of the evanescent field. For this purpose, three different diameters of 2 mm, 4 mm, and 6 mm UOFs are fabricated. The results show that the transmission of the U-shaped structure is dependent on the diameter of the UOF. Thereafter, different concentrations of glucose solutions are detected using the optimized stable UOF structure to showcase the sensing properties. Overall, this work is essential for beginners who want to conduct research on optical fiber sensors with a curved shape.
ABSTRACT
This paper discusses the details about the fabrication of single-mode fiber (SMF)- and multi-mode fiber (MMF)-based core-offset sensor structures for biomolecules detection. SMF-MMF-SMF (SMS) and SMF-core-offset MMF-SMF (SMS structure with core-offset) are proposed in this paper. In the conventional SMS structure the incident light is introduced from the SMF to the MMF and then passes through the MMF to the SMF. However, in the SMS-based core offset structure (COS) the incident light is introduced from the SMF to the core offset MMF and then passes through the MMF to the SMF, and more incident light leaks at the fusion point between the SMF and the MMF. This structure causes more incident light to leak out from the sensor probe, forming evanescent waves. By analyzing the transmitted intensity, the performance of COS can be improved. The results show that the structure of the core offset has great potential for the development of fiber-optic sensors.
Subject(s)
Fiber Optic TechnologyABSTRACT
In this work, the fabrication and sensing performance of fusion structures based on single-mode fiber (SMF) and multimode fiber (MMF) with different cladding diameters are discussed, and the effects of different lengths of MMF and fiber etching on sensing performance are analyzed. First, the transmitted intensity measurement experiment is performed, and the results indicate that the performance of the SMF-MMF-SMF(SMS)-based structure is better for sensing purposes. In addition, the results demonstrate that the performance of etched fiber is better than that of non-etched fiber. The etched fiber structure with lower fiber diameters produces more evanescent waves and is better for sensing purposes. Therefore, the proposed structure has certain development potential as an application of future optical fiber sensors.
ABSTRACT
In this paper, three S-tapered fiber (STF) structures with different diameters (40, 60, and 80 µm) are fabricated using conventional single-mode fiber. First, the reproducibility of the proposed S-tapered structure is confirmed through an analysis of the diameter distribution. Considering the transmitted intensities of the three various diameter, S-tapered structures reveal that the STF with a 40 µm diameter produces more evanescent waves and is more sensitive to external refractive index variations. Therefore, the STF structure with a 40 µm diameter was evaluated for the detection of different concentration of glucose solutions, demonstrating that the structure has the potential to be utilized to develop a highly sensitive fiber sensor.
ABSTRACT
The Conditional Independence (CI) test is a fundamental problem in statistics. Many nonparametric CI tests have been developed, but a common challenge exists: the current methods perform poorly with a high-dimensional conditioning set. In this paper, we considered a nonparametric CI test using a kernel-based test statistic, which can be viewed as an extension of the Hilbert-Schmidt Independence Criterion (HSIC). We propose a local bootstrap method to generate samples from the null distribution H0:Xâ««Yâ£Z. The experimental results showed that our proposed method led to a significant performance improvement compared with previous methods. In particular, our method performed well against the growth of the dimension of the conditioning set. Meanwhile, our method can be computed efficiently against the growth of the sample size and the dimension of the conditioning set.
ABSTRACT
The purpose of this article is to propose an optical fiber sensor probe based on the localized surface plasma resonance (LSPR) technique for the detection of creatinine in aquaculture. The sensing probe is functionalized through the use of gold nanoparticles (AuNPs), niobium carbide (Nb2CTx) MXene, and creatinase (CA) enzyme. The intrinsic total internal reflection (TIR) mechanism is modified to increase the evanescent field intensity using a heterogeneous core mismatch and tapering probe structure (i.e., convex fiber-tapered seven core fiber-convex fiber (CTC) structure). Strong evanescent fields can stimulate AuNPs and induce the LSPR effect, thereby increasing probe sensitivity. The specific recognition is enhanced by Nb2CTx MXene adsorbing more active CA enzymes. The developed sensor probe has a sensitivity and limit of detection of 3.1 pm/µM and 86.12 µM, respectively, in the linear range of 0-2000 µM. Additionally, the sensor probe's reusability, reproducibility, stability, and selectivity were evaluated, with satisfactory results obtained with impact for areas like food protein, marine life and healthcare.
Subject(s)
Biosensing Techniques , Metal Nanoparticles , Aquaculture , Biosensing Techniques/methods , Creatinine , Gold/chemistry , Metal Nanoparticles/chemistry , Reproducibility of Results , Surface Plasmon Resonance/methodsABSTRACT
In this Letter, using a Yb,Gd:CaSrF2 co-doping mixed crystal, an ultra-low threshold and efficient Kerr-lens mode-locked femtosecond oscillator is realized with a mode-locking threshold as low as 150â mW. With a 200-mW pump power, the shortest pulses are obtained with a pulse duration of 57 fs. A maximum mode-locked output power of 185â mW is observed under a 500-mW pump power, corresponding to an optical-to-optical efficiency of up to 37%. To the best of our knowledge, the 150-mW threshold is the lowest pump power to realize Kerr-lens mode-locking operation in Yb-doped bulk lasers. Furthermore, an optical efficiency of 37% is the highest efficiency in Yb-doped fluoride bulk lasers to date. Our results provide a new basis for high-efficiency and low-threshold Yb-doped ultrafast bulk lasers.
ABSTRACT
BACKGROUND: The combined application of immune cells and specific biomarkers related to the tumor immune microenvironment has a better predictive value for the prognosis of HCC. The purpose of this study is to construct a new prognostic model based on immune-related genes that regulate cross-talk between immune and tumor cells to assess the prognosis and explore possible mechanisms. METHOD: The immune cell abundance ratio of 424 cases in the TCGA-LIHC database is obtained through the CIBERSORT algorithm. The differential gene analysis and cox regression analysis is used to screen IRGs. In addition, the function of IRGs was preliminarily explored through the co-culture of M2 macrophages and HCC cell lines. The clinical validation, nomogram establishment and performing tumor microenvironment score were validated. RESULTS: We identified 4 immune cells and 9 hub genes related to the prognosis. Further, we identified S100A9, CD79B, TNFRSF11B as an IRGs signature, which is verified in the ICGC and GSE76427 database. Importantly, IRGs signature is closely related to the prognosis, tumor microenvironment score, clinical characteristics and immunotherapy, and nomogram combined with clinical characteristics is more conducive to clinical promotion. In addition, after co-culture with M2 macrophages, the migration capacity and cell pseudopod of MHCC97H increased significantly. And CD79B and TNFRSF11B were significantly down-regulated in MHCC97H, Huh7 and LM3, while S100A9 was up-regulated. CONCLUSION: We constructed an IRGs signature and discussed possible mechanisms. The nomogram established based on IRGs can accurately predict the prognosis of HCC patients. These findings may provide a suitable therapeutic target for HCC.
Subject(s)
Carcinoma, Hepatocellular , Liver Neoplasms , Biomarkers, Tumor/genetics , Carcinoma, Hepatocellular/pathology , Gene Expression Regulation, Neoplastic , Humans , Liver Neoplasms/pathology , Nomograms , Prognosis , Tumor Microenvironment/geneticsABSTRACT
The paper discusses the application of single-mode fiber (SMF) and multimode fiber (MMF) to the fabrication of a sensor structure based on the hetero-core optical fiber structure. The proposed structures are SMF-MMF-SMF (SMS), MMF-SMF-MMF (MSM), and SMF-MMF-SMF-MMF-SMF (SMSMS). The transmitted intensity of the probe is used to estimate the strength of the evanescent field. The results indicate that the SMSMS structure generates more evanescent waves that penetrate deeper into the sensing probe, increasing its sensitivity. As a result, the SMSMS structure has enormous development potential in the field of sensing.
Subject(s)
Optical Fibers , Feasibility StudiesABSTRACT
This paper primarily discusses the structural performance analysis of a single/double/quadruple tapered optical fiber (TOF) structure based on single-mode fiber (SMF) and multi-mode fiber (MMF). Furthermore, the TOF's performance, including its diameter distribution, transmitted intensity, and reproducibility, is also evaluated. According to the experimental results, it can be concluded that the quadruple TOF structure based on SMF has a higher density of evanescent waves (EWs) on the surface of the tapered area, which is essential for the fabrication of high-sensitivity optical fiber sensors. The structure proposed in this article is feasible, and it can be used for optical fiber sensing while offering significant practical and promising applications as well.