Linking the Photoinduced Surface Potential Difference to Interfacial Charge Transfer in Photoelectrocatalytic Water Oxidation.

Charge transfer at the semiconductor/solution interface is fundamental to photoelectrocatalytic water splitting. Although insights into charge transfer in the electrocatalytic process can be gained from the phenomenological Butler-Volmer theory, there is limited understanding of interfacial charge transfer in the photoelectrocatalytic process, which involves intricate effects of light, bias, and catalysis. Here, using operando surface potential measurements, we decouple the charge transfer and surface reaction processes and find that the surface reaction enhances the photovoltage via a reaction-related photoinduced charge transfer regime as demonstrated on a SrTiO3 photoanode. We show that the reaction-related charge transfer induces a change in the surface potential that is linearly correlated to the interfacial charge transfer rate of water oxidation. The linear behavior is independent of the applied bias and light intensity and reveals a general rule for interfacial transfer of photogenerated minority carriers. We anticipate the linear rule to be a phenomenological theory for describing interfacial charge transfer in photoelectrocatalysis.

Fine mapping of powdery mildew resistance gene MlWE74 derived from wild emmer wheat (Triticum turgidum ssp. dicoccoides) in an NBS-LRR gene cluster.

KEY MESSAGE: Powdery mildew resistance gene MlWE74, originated from wild emmer wheat accession G-748-M, was mapped in an NBS-LRR gene cluster of chromosome 2BS. Wheat powdery mildew, caused by Blumeria graminis f. sp. tritici (Bgt), is a globally devastating disease. Wild emmer wheat (Triticum turgidum var. dicoccoides) is a valuable genetic resource for improving disease resistance in common wheat. A powdery mildew resistance gene was transferred to hexaploid wheat line WE74 from wild emmer accession G-748-M. Genetic analysis revealed that the powdery mildew resistance in WE74 is controlled by a single dominant gene, herein temporarily designated MlWE74. Bulked segregant analysis (BSA) and molecular mapping delimited MlWE74 to the terminal region of chromosome 2BS flanking by markers WGGBD412 and WGGBH346 within a genetic interval of 0.25 cM and corresponding to 799.9 kb genomic region in the Zavitan reference sequence. Sequence annotation revealed two phosphoglycerate mutase-like genes, an alpha/beta-hydrolases gene, and five NBS-LRR disease resistance genes that could serve as candidates for map-based cloning of MlWE74. The geographical location analysis indicated that MlWE74 is mainly distributed in Rosh Pinna and Amirim regions, in the northern part of Israel, where environmental conditions are favorable to the occurrence of powdery mildew. Moreover, the co-segregated marker WGGBD425 is helpful in marker-assisted transfer of MlWE74 into elite cultivars.

Estimating critical values from electrocardiogram using a deep ordinal convolutional neural network.

BACKGROUND: Critical values are commonly used in clinical laboratory tests to define health-related conditions of varying degrees. Knowing the values, people can quickly become aware of health risks, and the health professionals can take immediate actions and save lives. METHODS: In this paper, we propose a method that extends the concept of critical value to one of the most commonly used physiological signals in the clinical environment-Electrocardiogram (ECG). We first construct a mapping from common ECG diagnostic conclusions to critical values. After that, we build a 61-layer deep convolutional neural network named CardioV, which is characterized by an ordinal classifier. RESULTS: We conduct experiments on a large public ECG dataset, and demonstrate that CardioV achieves a mean absolute error of 0.4984 and a ROC-AUC score of 0.8735. In addition, we find that the model performs better for extreme critical values and the younger age group, while gender does not affect the performance. The ablation study confirms that the ordinal classification mechanism suits for estimating the critical values which contain ranking information. Moreover, model interpretation techniques help us discover that CardioV focuses on the characteristic ECG locations during the critical value estimation process. CONCLUSIONS: As an ordinal classifier, CardioV performs well in estimating ECG critical values that can help people quickly identify different heart conditions. We obtain ROC-AUC scores above 0.8 for all four critical value categories, and find that the extreme values (0 (no risk) and 3 (high risk)) have better model performance than the other two (1 (low risk) and 2 (medium risk)). Results also show that gender does not affect the performance, and the older age group has worse performance than the younger age group. In addition, visualization techniques reveal that the model pays more attention to characteristic ECG locations.

Efficient removal of As(III) via simultaneous oxidation and adsorption by magnetic sulfur-doped Fe-Cu-Y trimetal oxide nanoparticles.

A novel magnetic sulfur-doped Fe-Cu-Y trimetal oxide (MST) nanomaterial was successfully synthesized by a chemical coprecipitation method to remove As(III) via simultaneous oxidation and adsorption and then characterized by BET, VSM, FESEM, XPS, and FTIR techniques. The effect of solution initial pH on the adsorption of As(III), and the adsorption kinetics and isotherm were investigated in detail. The results indicated that the MST nanoparticles exhibited an excellent performance for As(III) removal in a pH range of 7-10 and were easily separated from aqueous solution with a magnet. The maximum removal capability for As(III) reached 202.0 mg/g at pH 7.0. The adsorption of As(III) was well fitted by the pseudo-second-order kinetic model and Langmuir isotherm model, respectively. The investigation of mechanism revealed that As(III) could be oxidized to As(V) by O2- and OH free radicals, generated via the dissolved O2 obtaining an electron from Cu(I) on the surface of the adsorbent and Fenton/Fenton-like reaction, respectively. Meanwhile, the produced As(V) was adsorbed onto the surface of the nanoparticles through the electrostatic attraction or diffusion. The adsorbed As(V) further interacted with -OH groups via ion exchange or with Y(III) on the surface of the adsorbent to form a precipitate. Therefore, the MST nanoparticles are promising for the removal of arsenic from water.

Mapping stripe rust resistance gene YrZH22 in Chinese wheat cultivar Zhoumai 22 by bulked segregant RNA-Seq (BSR-Seq) and comparative genomics analyses.

KEY MESSAGE: A stripe rust resistance gene YrZH22 was mapped by combined BSR-Seq and comparative genomics analyses to a 5.92 centimorgan (cM) genetic interval spanning a 4 Mb physical genomic region on wheat chromosome 4BL1. Stripe rust, caused by Puccinia striiformis f. sp. tritici (PST), is one of the most destructive diseases of wheat and severely threatens wheat production worldwide. The widely grown Chinese wheat cultivar Zhoumai 22 is highly resistant to the current prevailing PST race CYR34 (V26). Genetic analysis of F5:6 and F6:7 recombinant inbred line (RIL) populations indicated that adult-plant stripe rust resistance in Zhoumai 22 is controlled by a single gene, temporarily designated YrZH22. By applying bulked segregant RNA-Seq (BSR-Seq), 7 SNP markers were developed and SNP mapping showed that YrZH22 is located between markers WGGB105 and WGGB112 on chromosome arm 4BL. The corresponding genomic regions of the Chinese Spring 4BL genome assembly and physical map of Aegilops tauschii 4DL were selected for comparative genomics analyses to develop nine new polymorphic markers that were used to construct a high-resolution genetic linkage map of YrZH22. YrZH22 was delimited in a 5.92 cM genetic interval between markers WGGB133 and WGGB146, corresponding to 4.1 Mb genomic interval in Chinese Spring 4BL and a 2.2 Mb orthologous genomic region in Ae. tauschii 4DL. The genetic linkage map of YrZH22 will be valuable for fine mapping and positional cloning of YrZH22, and can be used for marker-assisted selection in wheat breeding.

Fine genetic mapping of spot blotch resistance gene Sb3 in wheat (Triticum aestivum).

KEY MESSAGE: Spot blotch disease resistance gene Sb3 was mapped to a 0.15 centimorgan (cM) genetic interval spanning a 602 kb physical genomic region on chromosome 3BS. Wheat spot blotch disease, caused by B. sorokiniana, is a devastating disease that can cause severe yield losses. Although inoculum levels can be reduced by planting disease-free seed, treatment of plants with fungicides and crop rotation, genetic resistance is likely to be a robust, economical and environmentally friendly tool in the control of spot blotch. The winter wheat line 621-7-1 confers immune resistance against B. sorokiniana. Genetic analysis indicates that the spot blotch resistance of 621-7-1 is controlled by a single dominant gene, provisionally designated Sb3. Bulked segregant analysis (BSA) and simple sequence repeat (SSR) mapping showed that Sb3 is located on chromosome arm 3BS linked with markers Xbarc133 and Xbarc147. Seven and twelve new polymorphic markers were developed from the Chinese Spring 3BS shotgun survey sequence contigs and 3BS reference sequences, respectively. Finally, Sb3 was mapped in a 0.15 cM genetic interval spanning a 602 kb physical genomic region of Chinese Spring chromosome 3BS. The genetic and physical maps of Sb3 provide a framework for map-based cloning and marker-assisted selection (MAS) of the spot blotch resistance.

Comparative fine mapping of the Wax 1 (W1) locus in hexaploid wheat.

KEY MESSAGE: By applying comparative genomics analyses, a high-density genetic linkage map of the Wax 1 ( W1 ) locus was constructed as a framework for map-based cloning. Glaucousness is described as the scattering effect of visible light from wax deposited on the cuticle of plant aerial organs. In wheat, the wax on leaves and stems is mainly controlled by two sets of genes: glaucousness loci (W1 and W2) and non-glaucousness loci (Iw1 and Iw2). Bulked segregant analysis (BSA) and simple sequence repeat (SSR) mapping showed that Wax1 (W1) is located on chromosome arm 2BS between markers Xgwm210 and Xbarc35. By applying comparative genomics analyses, colinearity genomic regions of the W1 locus on wheat 2BS were identified in Brachypodium distachyon chromosome 5, rice chromosome 4 and sorghum chromosome 6, respectively. Four STS markers were developed using the Triticum aestivum cv. Chinese Spring 454 contig sequences and the International Wheat Genome Sequencing Consortium (IWGSC) survey sequences. W1 was mapped into a 0.93 cM genetic interval flanked by markers XWGGC3197 and XWGGC2484, which has synteny with genomic regions of 56.5 kb in Brachypodium, 390 kb in rice and 31.8 kb in sorghum. The fine genetic map can serve as a framework for chromosome landing, physical mapping and map-based cloning of the W1 in wheat.

Genetic and physical mapping of powdery mildew resistance gene MlHLT in Chinese wheat landrace Hulutou.

KEY MESSAGE: A powdery mildew resistance gene MlHLT derived from a Chinese wheat landrace maps within a 3.6 centimorgan (cM) genetic interval spanning a 13.4 megabase (Mb) physical genomic region on chromosome 1DS. Wheat powdery mildew, caused by Blumeria graminis f. sp. tritici (Bgt) is a devastating disease that can cause severe yield losses. Chinese wheat landrace Hulutou confers nearly immune resistance against prevailing Bgt isolate E09 in Beijing. Genetic analysis indicate that the powdery mildew resistance of Hulutou is controlled by a single dominant gene, provisionally designated MlHLT. Bulked segregant analysis(BSA) and simple sequence repeat (SSR) mapping showed that MlHLT is located on chromosome arm 1DS between markers Xgwm337 and Xcfd83/Xcfd72. By applying comparative genomics analysis, collinearity genomic regions of the MlHLT locus on Aegilops tauschii chromosome 1DS were identified in Brachypodium distachyon chromosome 2, rice chromosome 5 and sorghum chromosome 9, respectively. Three new polymorphic markers were developed using the draft genome sequences and the extended single nucleotide polymorphism (SNP) marker sequences of Ae. tauschii accession AL8/78, as well as the Triticum aestivum cv. Chinese Spring 454 contig sequences and the International Wheat Genome Sequencing Consortium (IWGSC) survey sequences. MlHLT mapped into a 3.6 cM genetic interval spanning 13.4 Mb physical genomic region containing seven contigs (ctg220, ctg4623, ctg1063, ctg5929, ctg3163, ctg699 and ctg1065) on 1DS that has synteny with a 369.8 kb genomic region in Brachypodium, a 380.8 kb genomic region in rice and a 298.4 kb genomic region in sorghum. The genetic and physical maps of MlHLT provide framework for map-based cloning and marker-assisted selection (MAS) of the powdery mildew resistance gene MlHLT in Hulutou.

Dynamic evolution of resistance gene analogs in the orthologous genomic regions of powdery mildew resistance gene MlIW170 in Triticum dicoccoides and Aegilops tauschii.

KEY MESSAGE: Rapid evolution of powdery mildew resistance gene MlIW170 orthologous genomic regions in wheat subgenomes. Wheat is one of the most important staple grain crops in the world and also an excellent model for plant ploidy evolution research with different ploidy levels from diploid to hexaploid. Powdery mildew disease caused by Blumeria graminis f.sp. tritici can result in significant loss in both grain yield and quality in wheat. In this study, the wheat powdery mildew resistance gene MlIW170 locus located at the Triticum dicoccoides chromosome 2B short arm was further characterized by constructing and sequencing a BAC-based physical map contig covering a 0.3 cM genetic distance region (880 kb) and developing additional markers to delineate the resistance gene within a 0.16 cM genetic interval (372 kb). Comparative analyses of the T. dicoccoides 2BS region with the orthologous Aegilops tauschii 2DS region showed great gene colinearity, including the structure organization of both types of RGA1/2-like and RPS2-like resistance genes. Comparative analyses with the orthologous regions from Brachypodium and rice genomes revealed considerable dynamic evolutionary changes that have re-shaped this MlIW170 region in the wheat genome, resulting in a high number of non-syntenic genes including resistance-related genes. This result might reflect the rapid evolution in R-gene regions. Phylogenetic analysis on these resistance-related gene sequences indicated the duplication of these genes in the MlIW170 region, occurred before the separation of the wheat B and D genomes.

Comparative genetic mapping and genomic region collinearity analysis of the powdery mildew resistance gene Pm41.

KEY MESSAGE: By applying comparative genomics analyses, a high-density genetic linkage map narrowed the powdery mildew resistance gene Pm41 originating from wild emmer in a sub-centimorgan genetic interval. Wheat powdery mildew, caused by Blumeria graminis f. sp. tritici, results in large yield losses worldwide. A high-density genetic linkage map of the powdery mildew resistance gene Pm41, originating from wild emmer (Triticum turgidum var. dicoccoides) and previously mapped to the distal region of chromosome 3BL bin 0.63-1.00, was constructed using an F5:6 recombinant inbred line population derived from a cross of durum wheat cultivar Langdon and wild emmer accession IW2. By applying comparative genomics analyses, 19 polymorphic sequence-tagged site markers were developed and integrated into the Pm41 genetic linkage map. Ultimately, Pm41 was mapped in a 0.6 cM genetic interval flanked by markers XWGGC1505 and XWGGC1507, which correspond to 11.7, 19.2, and 24.9 kb orthologous genomic regions in Brachypodium, rice, and sorghum, respectively. The XWGGC1506 marker co-segregated with Pm41 and could be served as a starting point for chromosome landing and map-based cloning as well as marker-assisted selection of Pm41. Detailed comparative genomics analysis of the markers flanking the Pm41 locus in wheat and the putative orthologous genes in Brachypodium, rice, and sorghum suggests that the gene order is highly conserved between rice and sorghum. However, intra-chromosome inversions and re-arrangements are evident in the wheat and Brachypodium genomic regions, and gene duplications are also present in the orthologous genomic regions of Pm41 in wheat, indicating that the Brachypodium gene model can provide more useful information for wheat marker development.

Modulating Oxygen Vacancies in Lead Chromate for Photoelectrocatalytic Water Splitting.

Although modulating oxygen vacancies in semiconductors has attracted broad interest in photocatalysis and photoelectrocatalysis, identifying the intrinsic roles of oxygen vacancies on photoelectrocatalytic properties is often elusive. In this work, the oxygen vacancies in a typical semiconductor lead chromate (PbCrO4 ) are regulated via controlling the oxygen chemical potentials of O-poor and O-rich post-annealing atmospheres. Oxygen vacancies identified in PbCrO4 can introduce electronically shallow energy levels and deep energy levels owing to the symmetry difference of oxygen atoms in the structure. A higher population of deep energy levels created under O-poor atmosphere induces the formation of more surface trapped states, resulting in a higher photovoltage for charge separation. Meanwhile, the existence of surface trapped states can significantly improve the charge injection efficiency of the PbCrO4 photoanode and enhance the water oxidation activity. By modulating oxygen vacancies in the PbCrO4 photoanode, a photocurrent density of 3.43 mA cm-2 at 1.23 V vs reversible hydrogen electrode (RHE) under simulated AM1.5G is acheived. Further passivation of surface trapped states and introducing the water oxidation cocatalyst CoPi lead to a record applied bias photon-to-current efficiency (ABPE) of 1.12%. This work provides a guide to understand the mechanism of oxygen vacancies in oxide-based semiconductor photocatalysis and photoelectrocatalysis.

Visualizing the role of applied voltage in non-metal electrocatalysts.

Understanding how applied voltage drives the electrocatalytic reaction at the nanoscale is a fundamental scientific problem, particularly in non-metallic electrocatalysts, due to their low intrinsic carrier concentration. Herein, using monolayer molybdenum disulfide (MoS2) as a model system of non-metallic catalyst, the potential drops across the basal plane of MoS2 (ΔVsem) and the electric double layer (ΔVedl) are decoupled quantitatively as a function of applied voltage through in-situ surface potential microscopy. We visualize the evolution of the band structure under liquid conditions and clarify the process of EF keeping moving deep into Ec, revealing the formation process of the electrolyte gating effect. Additionally, electron transfer (ET) imaging reveals that the basal plane exhibits high ET activity, consistent with the results of surface potential measurements. The potential-dependent behavior of kf and ns in the ET reaction are further decoupled based on the measurements of ΔVsem and ΔVedl. Comparing the ET and hydrogen evolution reaction imaging results suggests that the low electrocatalytic activity of the basal plane is mainly due to the absence of active sites, rather than its electron transfer ability. This study fills an experimental gap in exploring driving forces for electrocatalysis at the nanoscale and addresses the long-standing issue of the inability to decouple charge transfer from catalytic processes.

Bacteria Wear ICG Clothes for Rapid Detection of Intracranial Infection in Patients After Neurosurgery and Photothermal Antibacterial Therapy Against Streptococcus Mutans.

Bacterial infection is one of the most serious physiological conditions threatening human health. There is an increasing demand for more effective bacterial diagnosis and treatment through non-invasive approaches. Among current antibacterial strategies of non-invasive approaches, photothermal antibacterial therapy (PTAT) has pronounced advantages with properties of minor damage to normal tissue and little chance to trigger antimicrobial resistance. Therefore, we developed a fast and simple strategy that integrated the sensitive detection and photothermal therapy of bacteria by measuring adenosine triphosphate (ATP) bioluminescence following targeted photothermal lysis. First, 3-azido-d-alanine (d-AzAla) is selectively integrated into the cell walls of bacteria, photosensitizer dibenzocyclooctyne, and double sulfonic acid-modified indocyanine green (sulfo-DBCO-ICG) are subsequently designed to react with the modified bacteria through in vivo click chemistry. Next, the sulfo-DBCO-ICG modified bacteria under irradiation of 808 nm near-infrared laser was immediately detected by ATP bioluminescence following targeted photothermal lysis and even the number of bacteria on the infected tissue can be significantly reduced through PTAT. This method has demonstrated the ability to detect the presence of the bacteria for ATP value in 32 clinical samples. As a result, the ATP value over of 100 confirmed the presence of bacteria in clinical samples for 22 patients undergoing craniotomy and ten otitis media patients. Overall, this study paves a brand new avenue to facile diagnosis and a treatment platform for clinical bacterial infections.

A Dual-Ligand Strategy to Regulate the Nucleation and Growth of Lead Chromate Photoanodes for Photoelectrochemical Water Splitting.

Photoelectrochemical (PEC) water splitting for renewable hydrogen production has been regarded as a promising solution to utilize solar energy. However, most photoelectrodes still suffer from poor film quality and poor charge separation properties, mainly owing to the possible formation of detrimental defects including microcracks and grain boundaries. Herein, a molecular coordination engineering strategy is developed by employing acetylacetone (Acac) and poly(ethylene glycol) (PEG) dual ligands to regulate the nucleation and crystal growth of the lead chromate (PbCrO4 ) photoanode, resulting in the formation of a high-quality film with large grain size, well-stitched grain boundaries, and reduced oxygen vacancies defects. With these efforts, the nonradiative charge recombination is efficiently suppressed, leading to the enhancement of its charge separation efficiency from 47% to 90%. After decorating with Co-Pi cocatalyst, the PbCrO4 photoanode achieves a photocurrent density of 3.15 mA cm-2 at 1.23 V (vs RHE under simulated AM1.5G) and an applied bias photon-to-current efficiency (ABPE) of 0.82%. This work provides a new strategy to modulate the nucleation and growth of high-quality photoelectrodes for efficient PEC water splitting.

MSU-Net: Multi-Scale U-Net for 2D Medical Image Segmentation.

Aiming at the limitation of the convolution kernel with a fixed receptive field and unknown prior to optimal network width in U-Net, multi-scale U-Net (MSU-Net) is proposed by us for medical image segmentation. First, multiple convolution sequence is used to extract more semantic features from the images. Second, the convolution kernel with different receptive fields is used to make features more diverse. The problem of unknown network width is alleviated by efficient integration of convolution kernel with different receptive fields. In addition, the multi-scale block is extended to other variants of the original U-Net to verify its universality. Five different medical image segmentation datasets are used to evaluate MSU-Net. A variety of imaging modalities are included in these datasets, such as electron microscopy, dermoscope, ultrasound, etc. Intersection over Union (IoU) of MSU-Net on each dataset are 0.771, 0.867, 0.708, 0.900, and 0.702, respectively. Experimental results show that MSU-Net achieves the best performance on different datasets. Our implementation is available at https://github.com/CN-zdy/MSU_Net.

MOFs-derived magnetic C@Cu-Ni bimetal particles: An efficient peroxymonosulfate activator for 2,4,6-trichlorophenol degradation.

In this study, magnetic Cu and Ni bimetallic particles embedded carbon sheets, namely as C@Cu-Ni, was derived via calcining a mixture of Cu-MOFs and Ni-MOFs (mass ratio = 4:6) under N2 protection and served as a catalyst for the degradation of 2,4,6-trichlorophenol (2,4,6-TCP) by peroxymonosulfate (PMS). The results showed that more than 98.5% of 2,4,6-TCP (10 mg L-1) was rapidly decomposed at initial pH = 5, PMS = 1 mM and catalyst dosage = 0.1 g L-1 within 30 min, accompanied by 42.47% removal of total organic carbon (TOC). This fully confirmed that C@Cu-Ni possessed excellent catalytic performance for PMS activation. The radical quenching experiments and electron paramagnetic resonance (EPR) investigation testified that the reactive oxygen species (ROS) included SO4•-, •OH, O2•- radicals and singlet oxygen (1O2), which were responsible for the rapid degradation of 2,4,6-TCP. Among them, O2•-and 1O2 played a decisive role. Cyclic voltammograms (CV) and electrochemical impedance spectroscopy (EIS) revealed that C@Cu-Ni material possessed superior electrical conductivity and electron transfer, improving its catalytic activity. What is more, C@Cu-Ni displayed excellent stability and could be consecutively used for five times without any decline of catalytic performance. The main intermediates of the 2,4,6-TCP degradation were analyzed by high-performance liquid chromatography-mass spectrometry (HPLC-MS/MS) and possible pathways of 2,4,6-TCP degradation were further proposed. The extraordinary stability and superior catalytic activity of C@Cu-Ni coupled with its easy separation from wastewater due to magnetism suggest that the newly synthesized material may offer a promising alternative approach to efficiently degrade organic pollutants by PMS.

Decorating S-doped Cu-La bimetallic oxides with UIO-66 to increase the As(III) adsorption capacity via synchronous oxidation and adsorption.

Arsenite (As(III)) is more toxic and difficult to remove than arsenate (As(V)). In this study, an S-doped Cu-La bimetallic oxide (S-CuLaO) decorated with metal-organic framework (MOF) composite (S-CuLaO@UIO-66) was synthesized and applied for the adsorption of As(III). The maximum adsorption capacity of As(III) by S-CuLaO@UIO-66 was as high as 171 mg/g, which was much higher compared with other MOF compounds reported to date. The UIO-66 support improved the dispersion and reduced the size of the S-CuLaO particles, which increased the number of exposed adsorption reactive sites. Study of the mechanism revealed that the synchronous oxidation and adsorption significantly increased the removal of As(III). O2∙- was produced by the receiving electron from the dissolved oxygen from Cu(I) in S-CuLaO, which converted As(III) to As(V). Furthermore, the stability and reusability S-CuLaO@UIO-66 (without regeneration) was investigated at a low As(III) concentration (approximately 1000 µg/L) in deionized water and well water. The residual arsenic concentration ranged from 0.8 to 2.8 µg/L in deionized water and 3-58.2 µg/L in well water within 240 min during three cycles. Generally, this study suggests that combining an optimal oxide with a stable MOF is a promising approach for the fabrication of composite adsorbents.

In Situ implantable, post-trauma microenvironment-responsive, ROS Depletion Hydrogels for the treatment of Traumatic brain injury.

Traumatic brain injury (TBI) generates excess reactive oxygen species (ROS), which can exacerbate secondary injury and result in disability and death. Secondary injury cascades can trigger the release of uncontrolled ROS into the surrounding normal brain tissue, forming an extended pool of ROS, which leads to massive neuronal death. Here, we developed an injectable, post-trauma microenvironment-responsive, ROS depletion hydrogel embedded curcumin (Cur) (TM/PC) for reducing ROS levels in damaged brain tissue to promote the regeneration and recovery of neurons. Hydrogel was composed of three parts: (1) Hydrophobic poly (propylene sulfide)120 (PPS120) was synthesized, with a ROS quencher and H2O2-responsive abilities, to embed Cur. (2) Matrix metalloproteinase (MMP)-responsive triglycerol monostearate (TM) was used to cover the PPS120 to form a TM/P hydrogel. (3) Cur could further eradicate the ROS, promoting the regeneration and recovery of neurons. In two postoperative TBI models, TM/PC hydrogel effectively responded the TBI surgical environment and released drug. TM/PC hydrogel significantly depleted ROS and reduced brain edema. In addition, reactive astrocytes and activated microglia were decreased, growth-associated protein 43 (GAP43) and doublecortin (DCX) were increased, suggested that TM/PC hydrogel had the strongest anti-inflammatory effect and effectively promoted nerve regeneration after TBI. This study provides new information for the management of TBI to prevent the secondary spread of damage.

Multimodal Glioma Image Segmentation Using Dual Encoder Structure and Channel Spatial Attention Block.

Multimodal medical images provide significant amounts of complementary semantic information. Therefore, multimodal medical imaging has been widely used in the segmentation of gliomas through computational neural networks. However, inputting images from different sources directly to the network does not achieve the best segmentation effect. This paper describes a convolutional neural network called F-S-Net that fuses the information from multimodal medical images and uses the semantic information contained within these images for glioma segmentation. The architecture of F-S-Net is formed by cascading two sub-networks. The first sub-network projects the multimodal medical images into the same semantic space, which ensures they have the same semantic metric. The second sub-network uses a dual encoder structure (DES) and a channel spatial attention block (CSAB) to extract more detailed information and focus on the lesion area. DES and CSAB are integrated into U-Net architectures. A multimodal glioma dataset collected by Yijishan Hospital of Wannan Medical College is used to train and evaluate the network. F-S-Net is found to achieve a dice coefficient of 0.9052 and Jaccard similarity of 0.8280, outperforming several previous segmentation methods.

CuO-Co3O4@CeO2 as a heterogeneous catalyst for efficient degradation of 2,4-dichlorophenoxyacetic acid by peroxymonosulfate.

CuO-Co3O4@CeO2 nanoparticles used as a heterogeneous catalyst were prepared via a sol-gel method and characterized by various techniques. For comparison, a series of oxides was investigated for activating peroxymonosulfate (PMS) during the degradation of 2,4-dichlorophenoxyacetic acid (2,4-D). The results indicated that CuO-Co3O4@CeO2 exhibited the highest catalytic performance among the catalysts. Complete degradation of 2,4-D (20 mg/L) was realized within 45 min at 1 mM PMS, CuO-Co3O4@CeO2 loading of 0.07 g/L, and pH of 6. Recycling experiments confirmed that CuO-Co3O4@CeO2 was very stable, and the 2,4-D degradation efficiencies ranged from 100% to 97.5%, decreasing by only 2.5% after the fifth run. The outstanding catalysis of CuO-Co3O4@CeO2 resulted from the synergy of cerium, cobalt, and copper. Electron paramagnetic resonance and radical scavenger experiments confirmed the production of SO4• - and •OH radicals in the CuO-Co3O4@CeO2/PMS system, which were responsible for efficient decomposition of 2,4-D. Furthermore, the combination of CuO-Co3O4@CeO2 andPMS was applied to treat natural water containing 2,4-D, and a high 2,4-D removal rate was also achieved. Based on these results, it was deduced that CuO-Co3O4@CeO2 can be utilized as a catalyst to activate PMS and destroy organic contaminants in aqueous solution.