The APC/CTAD1-WIDE LEAF 1-NARROW LEAF 1 pathway controls leaf width in rice.

Leaf morphology is one of the most important features of the ideal plant architecture. However, the genetic and molecular mechanisms controlling this feature in crops remain largely unknown. Here, we characterized the rice (Oryza sativa) wide leaf 1 (wl1) mutant, which has wider leaves than the wild-type due to more vascular bundles and greater distance between small vascular bundles. WL1 encodes a Cys-2/His-2-type zinc finger protein that interacts with Tillering and Dwarf 1 (TAD1), a co-activator of the anaphase-promoting complex/cyclosome (APC/C) (a multi-subunit E3 ligase). The APC/CTAD1 complex degrades WL1 via the ubiquitin-26S proteasome degradation pathway. Loss-of-function of TAD1 resulted in plants with narrow leaves due to reduced vascular bundle numbers and distance between the small vascular bundles. Interestingly, we found that WL1 negatively regulated the expression of a narrow leaf gene, NARROW LEAF 1 (NAL1), by recruiting the co-repressor TOPLESS-RELATED PROTEIN and directly binding to the NAL1 regulatory region to inhibit its expression by reducing the chromatin histone acetylation. Furthermore, biochemical and genetic analyses revealed that TAD1, WL1, and NAL1 operated in a common pathway to control the leaf width. Our study establishes an important framework for understanding the APC/CTAD1-WL1-NAL1 pathway-mediated control of leaf width in rice, and provides insights for improving crop plant architecture.

Nicotinamide Riboside Modulates HIF-1 Signaling to Maintain and Enhance Odontoblastic Differentiation in Human Dental Pulp Stem Cells.

Human dental pulp stem cells (hDPSCs) play a vital role in the regeneration of the pulp-dentin complex after pulp disease. While the regeneration efficiency relies on the odontoblastic differentiation capacity of hDPSCs, this is difficult to regulate within the pulp cavity. Although nicotinamide riboside (NR) has been found to promote tissue regeneration, its specific role in pulp-dentin complex regeneration is not fully understood. Here, we aimed to explore the role of NR in the odontoblastic differentiation of hDPSCs and its underlying molecular mechanism. It was found that NR enhanced the viability and retarded senescence in hDPSCs with higher NAD+/NADH levels. In contrast to the sustained action of NR, the multi-directional differentiation of hDPSCs was enhanced after NR pre-treatment. Moreover, in an ectopic pulp regeneration assay in nude mice, transplantation of hDPSCs pretreated with NR promoted the formation of a dentin-like structure surrounded by cells positively expressing DMP-1 and DSPP. RNA-Seq demonstrated inhibition of the HIF-1 signaling pathway in hDPSCs pretreated with NR. The number of HIF-1α-positive cells was significantly decreased in hDPSCs pretreated by NR in vivo. Similarly, NR significantly downregulated the expression of HIF-1α in vitro. The findings suggested that NR could potentially regulate hDPSC odontoblastic differentiation and promote the development of innovative strategies for dental pulp repair.

Electric Field Effects in Flash Joule Heating Synthesis.

Flash Joule heating has emerged as an ultrafast, scalable, and versatile synthesis method for nanomaterials, such as graphene. Here, we experimentally and theoretically deconvolute the contributions of thermal and electrical processes to the synthesis of graphene by flash Joule heating. While traditional methods of graphene synthesis involve purely chemical or thermal driving forces, our results show that the presence of charge and the resulting electric field in a graphene precursor catalyze the formation of graphene. Furthermore, modulation of the current or the pulse width affords the ability to control the three-step phase transition of the material from amorphous carbon to turbostratic graphene and finally to ordered (AB and ABC-stacked) graphene and graphite. Finally, density functional theory simulations reveal that the presence of a charge- and current-induced electric field inside the graphene precursor facilitates phase transition by lowering the activation energy of the reaction. These results demonstrate that the passage of electrical current through a solid sample can directly drive nanocrystal nucleation in flash Joule heating, an insight that may inform future Joule heating or other electrical synthesis strategies.

Integrating MXene Film With Recyclable Polyethylene Glycol-co-Polyphosphazene Copolymer as Solid-Solid Phase Change Material for Versatile Applications.

Phase-change materials (PCMs) stand a pivotal advancement in thermal energy storage and management due to their reversible phase transitions to store and release an abundance of heat energy. However, conventional solid-liquid PCMs suffer from fluidity and leakage in their molten state, limiting their applications at advanced levels. Herein, a novel Zn2+-crosslinked polyethylene glycol-co-polyphosphazene copolymer (PCEPN-Zn) as a solid-solid PCM through dynamic metal-ligand coordination is first designed and synthesized. The as-synthesized PCEPN-Zn is further integrated with an MXene film to construct a double-layered phase-change composite through layer-by layer adhesion. Owing to the introduction of MXene film with low emissivity, good light absorptivity, and nonflammability, the resultant phase-change composite not only presents a high latent-heat capacity, good thermal stability, high thermal reliability, and excellent shape stability, but also exhibits a superior self-healing ability, good recyclability, high adhesivity, and good flame-retardant performance. It can be easily adhered to on most objects for various application scenarios. With a combination of the excellent functions derived from PCEPN-Zn and MXene film, the developed phase-change composite exhibits broad prospects for versatile applications in the thermal management of CPUs and Li-ion batteries, thermal infrared stealth of high-temperature objects, heat therapy in the clinic, and fire-safety for various scenarios.

Enhancing Solar Steam Generation of Hydrogels via Silver Nanoparticle-Doped Cellulose Nanofibers.

Solar steam generation (SSG) is regarded as an efficient approach for harnessing solar energy to purify polluted or saline water. Herein, we demonstrate a hydrogel composed of cellulose nanofibers (CNFs), polyethylenimine (PEI), and reduced graphene oxide (rGO) that functions as an independent solar steam generator, which shows enhanced solar water evaporation efficiency by incorporating silver nanoparticles (AgNPs). It presented that the presence of AgNPs increases the photothermal conversion efficiency and thermal conductivity of the evaporator and reduces the enthalpy of evaporation. As a result, an outstanding water evaporation rate of 3.62 kg m-2 h-1 and a photothermal conversion efficiency of 96.25% are successfully obtained under one sun illumination. Also, the resulting hydrogel exhibits exceptional mechanical properties, as well as outstanding desalination and salt-resistant abilities during prolonged seawater desalination. In oil/water mixtures, the evaporation of the hydrogel decreases to 2.94 kg m-2 h-1, owing to the oil layer barrier. This work paves a reference approach to produce easily addressed cellulose nanofiber (CNF)-based hydrogel evaporators with significantly enhanced evaporation rates.

Diatomite@MoS2 Nanocomposite Layers as Composite Coating Targeting for Mg Alloys Endowed with Properties of Anticorrosion and Antiwear.

Molybdenum disulfide (MoS2) demonstrates promising applications in enhancing the corrosion and wear resistance of metals, but the susceptibility of this nanomaterial to agglomeration hinders its overall performance. In this study, the externally assisted corrosion inhibitor sodium molybdate (SM) was successfully constructed in diatomaceous earth (DE) and molybdenum disulfide (MoS2). This not only served as a molybdenum source for MoS2 but also enabled the preparation of DE@MoS2-SM microcapsules, achieving a corrosion inhibitor loading of up to 23.23%. The corrosion testing reveals that the composite coating, when compared to the pure epoxy coating, exhibits an impedance modulus 2 orders of magnitude higher (1.80 × 109 Ω·cm2), offering prolonged protection for magnesium alloys over a 40 day period. Furthermore, a filler content of 3% sustains a coefficient of friction (COF) at 0.55 for an extended duration, indicating commendable stability and wear resistance. The protective performance is ascribed to the synergistic enhancement of corrosion and wear resistance in the coatings, facilitated by the pore structure of DE, the high hardness of MoS2, and the obstructive influence of Na2MoO4. This approach offers a straightforward and efficient means of designing microcapsules for use in corrosive environments, whose application can be extended in industrial fields. In particular, we promote the application of nautical instruments, underwater weapons, and seawater batteries in the shipbuilding industry and marine engineering.

Associations between blood nickel and lung function in young Chinese: An observational study combining epidemiology and metabolomics.

Prior research has explored the relationship between occupational exposure to nickel and lung function. Nonetheless, there is limited research examining the correlation between blood nickel levels and lung function among young adults in the general population. The metabolomic changes associated with nickel exposure have not been well elucidated. On August 23, 2019, we enrolled 257 undergraduate participants from the Chinese Undergraduates Cohort to undergo measurements of blood nickel levels and lung function. The follow-up study was conducted in May 2021. A linear mixed-effects model was employed to assess the relationship between blood nickel levels and lung function. We also conducted stratified analyses by home address. In addition, in order to explore the biological mechanism of lung function damage caused by nickel exposure, we performed metabolomic analyses of baseline serum samples (N = 251). Both analysis of variance and mixed linear effect models were utilized to assess the impact of blood nickel exposure on metabolism. Our findings from cross-sectional and cohort analyses revealed a significant association between blood nickel levels and decreased forced expiratory volume in the first second (FEV1) and forced vital capacity (FVC) among young adults in the general population. Furthermore, we found stronger associations in urban areas. In metabolomics analysis, a total of nine metabolites were significantly changed under blood nickel exposure. The changed metabolites were mainly enriched in six pathways including carbohydrate, amino acid, and cofactor vitamin metabolism. These metabolic pathways involve inflammation and oxidative stress, indicating that high concentrations of nickel exposure can cause inflammation and oxidative stress by disrupting the above metabolism of the body.

In situ Light-Writable Orientation Control in Liquid Crystal Elastomer Film Enabled by Chalcones.

Liquid crystal elastomers (LCEs) are stimulus-responsive materials with intrinsic anisotropy. However, it is still challenging to in situ program the mesogen alignment to realize three-dimensional (3D) deformations with high-resolution patterned structures. This work presents a feasible strategy to program the anisotropy of LCEs by using chalcone mesogens that can undergo a photoinduced cycloaddition reaction under linear polarized light. It is shown that by controlling the polarization director and the irradiation region, patterned alignment distribution in a freestanding LCE film can be created, which leads to complex and reversible 3D shape-morphing behaviors. The work demonstrates an in situ light-writing method to achieve sophisticated topography changes in LCEs, which has potential applications in encryption, sensors, and beyond.

Cigarette smoke extract-induced inflammatory response via inhibition of the TFEB-mediated autophagy in NR8383 cells.

Objective: Chronic pulmonary inflammation caused by long-term smoking is the core pathology of COPD. Alveolar macrophages (AMs) are involved in the pulmonary inflammation of COPD. The accumulation of damaged materials caused by impaired autophagy triggers inflammatory response in macrophages. As a key transcription regulator, transcription factor EB (TFEB) activates the transcription of target genes related autophagy and lysosome by binding to promoters, whereas it is unclarified for the relationship between inflammatory response induced by cigarette smoke extract (CSE) and TFEB-mediated autophagy. Thus, we investigated the role of TFEB-mediated autophagy in inflammatory response induced by CSE in NR8383 cells, and to explore its potential mechanism. Methods: Based on cell viability and autophagy, cells treated with 20% concentration of CSE for 24 h were selected for further studies. Cells were divided into control group, chloroquine (CQ, the autophagy inhibitor) group, CSE group, CSE + rapamycin (the autophagy inducer) group and CSE + fisetin (the TFEB inducer) group. The levels of tumor necrosis factor α (TNF-α), interleukin 1ß (IL-1ß), and IL-6 in supernatant were detected by ELISA kits. The protein expressions were tested by western blot. The intensity of fluorescence of Lysosome-associated membrane protein 1 (LAMP1) and TFEB was detected by immunofluorescence. Lyso-Tracker Red staining was applied to detect the lysosome environment. Results: CSE inhibited the cell viability, increased the contents of TNF-α, IL-1ß, IL-6, the ratio of LC3II/I, and the level of P62 protein. Besides, CSE decreased the fluorescence intensity of LAMP1 protein and Lyso-Tracker Red staining, as well as the ratio of nucleus/cytosol of TFEB protein. Activating autophagy with rapamycin alleviated CSE-induced inflammatory response. The activation of TFEB via fisetin alleviated CSE-induced autophagy impairment and lysosomal dysfunction, thus alleviated inflammatory response in NR8383 cells. Conclusion: CSE-induced inflammatory response in NR8383 cells, which may be related to the inhibition of TFEB-mediated autophagy.

A Photo- and Thermo-Driven Azoarene-Based Circularly Polarized Luminescence Molecular Switch in a Liquid Crystal Host.

The development of chiral optical active materials with switchable circularly polarized luminescence (CPL) signals remains a challenge. Here an azoarene-based circularly polarized luminescence molecular switch, (S, R, S)-switch 1 and (R, R, R)-switch 2, are designed and prepared with an (R)-binaphthyl azo group as a chiral photosensitive moiety and two (S)- or (R)-binaphthyl fluorescent molecules with opposite or the same handedness as chiral fluorescent moieties. Both switches exhibit reversible trans/cis isomerization when irradiated by 365 nm UV light and 520 nm green light in solvent and liquid crystal (LC) media. In contrast with the control (R, R, R)-switch 2, when switch 1 is doped into nematic LCs, polarization inversion and switching-off of the CPL signals are achieved in the resultant helical superstructure upon irradiation with 365 nm UV and 520 nm green light, respectively. Meanwhile, the fluorescence intensity of the system is basically unchanged during this switching process. In particular, these variations of the CPL signals could be recovered after heating, realizing the true sense of CPL reversible switching. Taking advantage of the unique CPL switching, the proof-of-concept for "a dual-optical information encryption system" based on the above CPL active material is demonstrated.

A Dual-Responsive Liquid Crystal Elastomer for Multi-Level Encryption and Transient Information Display.

Information security has gained increasing attention in the past decade, leading to the development of advanced materials for anti-counterfeiting, encryption and instantaneous information display. However, it remains challenging to achieve high information security with simple encryption procedures and low-energy stimuli. Herein, a series of strain/temperature-responsive liquid crystal elastomers (LCEs) are developed to achieve dual-modal, multi-level information encryption and real-time, rewritable transient information display. The as-prepared polydomain LCEs can change from an opaque state to a transparent state under strain or temperature stimuli, with the transition strains or temperatures highly dependent on the concentration of long-chain flexible spacers. Information encrypted by different LCE inks can be decrypted under specific strains or temperatures, leading to multi-level protection of information security. Furthermore, with the combination of the phase transition of polydomain LCEs and the photothermal effect of multi-walled carbon nanotubes (MWCNTs), we achieved a repeatable transient information display by using near-infrared (NIR) light as a pen for writing. This study provides new insight into the development of advanced encryption materials with versatility and high security for broad applications.

Grazing exclusion had greater effects than nitrogen addition on soil and plant community in a desert steppe, Northwest of China.

BACKGROUND: The impacts of increasing nitrogen (N) deposition and overgrazing on terrestrial ecosystems have been continuously hot issues. Grazing exclusion, aimed at restoration of grassland ecosystem function and service, has been extensively applied, and considered a rapid and effective vegetation restoration method. However, the synthetic effects of exclosure and N deposition on plant and community characteristics have rarely been studied. Here, a 4-year field experiment of N addition and exclusion treatment had been conducted in the desert steppe dominated by Alhagi sparsifolia and Lycium ruthenicum in northwest of China, and the responses of soil characteristics, plant nutrition and plant community to the treatments had been analyzed. RESULTS: The grazing exclusion significantly increased total N concentration in the surface soil (0-20 cm), and increased plant height, coverage (P < 0.05) and aboveground biomass. Specifically, A. sparsifolia recovered faster both in individual and community levels than L. ruthenicum did after exclusion. There was no difference in response to N addition gradients between the two plants. CONCLUSIONS: Our findings suggest that it is exclusion rather than N addition that has greater impacts on soil properties and plant community in desert steppe. Present N deposition level has no effect on plant community of desert steppe based on short-term experimental treatments.

Visible Light-Driven Molecular Switches and Motors: Recent Developments and Applications.

Inspired by human vision, a diverse range of light-driven molecular switches and motors have been developed for fundamental understanding and application in material science and biology. Recently, the design and synthesis of visible light-driven molecular switches and motors have been actively pursued. This emerging trend is partly motivated to avoid the harmful effects of ultraviolet light, which was necessary to drive the classical molecular switches and motors at least in one direction, impeding their employment in biomedical and photopharmacology applications. Moreover, visible light-driven molecular switches and motors are demonstrated to enable benign optical materials for advanced photonic devices. Therefore, during the past several years, visible light-driven molecular switches based on azobenzene derivatives, diarylethenes, 1,2-dicyanodithienylethenes, hemithioindigo derivatives, iminothioindoxyls, donor-acceptor Stenhouse adducts, and overcrowded alkene based molecular motors have been judiciously designed, synthesized, and used in the development of functional materials and systems for a wide range of applications. In this Review, we present the recent developments toward the design of visible light-driven molecular switches and motors, with their applications in the fabrication of functional materials and systems in material science, bioscience, pharmacology, etc. The visible light-driven molecular switches and motors realized so far undoubtedly widen the scope of these interesting compounds for technological and biological applications. We hope this Review article could provide additional impetus and inspire further research interests for future exploration of visible light-driven advanced materials, systems, and devices.

Controlling the Thermal Stability, Threshold Voltage, and Thermoelectric Properties of Cuprous Sulfide Thermoelectrics.

Cu-ion liquid-like copper sulfide materials have excellent thermoelectric properties, while their applications are limited by their high-temperature decomposition and electric field-driven Cu precipitation issues. In particular, high thermoelectric properties and electric field-driven degradation are difficult to reconcile because liquid-like Cu ions are dominant in low κ and high ZT, while they cause electric field-driven degradation. Here, we control the sintering current and duration time to remove the Cu1.8S phase, thereby inhibiting the thermal decomposition of the copper sulfide samples, and introduce the Fe element into the sample matrix to improve its resistance to electric field-driven degradation. We reveal that the kinetic process of Cu1.8S phase decomposition can be suppressed by increasing the relative density of the sample or covering a layer of dense coating/film on the surface of the sample. However, as long as the Cu1.8S phase is present in the sample, it cannot maintain thermal stability above 450 °C. Furthermore, we find that the Fe element forms a nanogrid spinodal decomposition structure in the sample matrix, which acts as a barrier wall to prevent the long-range diffusion of liquid-like Cu ions and inhibit the electric field-driven degradation. The freely movable liquid-like Cu ions in the grid maintain a strong scattering of phonons in a short range, so the sample possesses low κ and high ZT. Then, a strategy to unify the high thermal decomposition temperature, high threshold voltage, and high thermoelectric performance of copper sulfide thermoelectric materials is proposed: transforming the Cu1.8S phase and introducing a liquid-like Cu ion migration barrier.

Design, synthesis and structure-activity relationship optimization of phenanthridine derivatives as new anti-vitiligo compounds.

Humans have been suffering from vitiligo for a long time. Target vitiligo drugs have yet been approved. Activation of Wnt/ß-catenin signalling has potential in the therapeutic use of vitiligo, so exploring new drugs that specifically directly activate Wnt is worthwhile to obtain new anti-vitiligo agents. In this work, two portions design and synthesis were put into effect. firstly, 17 phenanthridine derivatives with C-4 substitutes were designed and synthesized, which compounds 4, 6, 12, 13 served as H-acceptor with protein showed enhance melanogenesis activity; Secondly, 7 hybrid new scaffolds of compounds were designed and synthesized, scaffold hopping compound 36 that aromatic benzene was replaced pyrazole on ring C showed enhance melanogenesis and tyrosinase activity; The last and most important, a comprehensive optimization and SARs of compound 36 were carried out, compounds 41 and 43 shared phenolic hydroxyl or 3-methyl-pyridine substitutes at C-7 position remarkably improved the capacity of melanogenesis and tyrosinase activity. Compound 43 were identified as new anti-vitiligo agents that specifically activate the Wnt/ß-catenin signalling pathway by targeting Axin. Structure-activity relationship analysis implied that H-acceptor substitutions at the C-4 position and phenolic hydroxyl or pyridine substitutions at the C-7 position would improve the activities of the compounds. These findings reveal a new therapeutic strategy for vitiligo, and compounds 41 and 43 may represent potential compounds for vitiligo treatment.

Core-Shell Structured SiO2@NiFe LDH Composite for Broadband Electromagnetic Wave Absorption.

In this work, a novel core-shell structure material, NiFe layered double hydroxide (NiFe LDH) loaded on SiO2 microspheres (SiO2@NiFe LDH), was synthesized by a one-step hydrothermal method, and the spontaneous electrostatic self-assembly process. The morphology, structure, and microwave absorption properties of SiO2@NiFe LDH nanocomposites with different NiFe element ratios were systematically investigated. The results show that the sample of SiO2@NiFe LDH-3 nanocomposite has excellent microwave absorption properties. It exhibits broadband effective absorption bandwidth (RL < −10 dB) of 8.24 GHz (from 9.76 GHz to 18.0 GHz) and the reflection loss is −53.78 dB at the matched thickness of 6.95 mm. It is expected that this SiO2@NiFe-LDH core-shell structural material can be used as a promising non-precious, metal-based material microwave absorber to eliminate electromagnetic wave contamination.

Microwave Absorption of α-Fe2O3@diatomite Composites.

A neoteric round sieve diatomite (De) decorated with sea-urchin-like alpha-type iron trioxide (α-Fe2O3) synthetics was prepared by the hydrothermal method and further calcination. The results of the electromagnetic (EM) parameters of α-Fe2O3-decorated De (α-Fe2O3@D) showed that the minimum reflection loss (RLmin) of α-Fe2O3@D could reach -54.2 dB at 11.52 GHz and the matched absorber thickness was 3 mm. The frequency bandwidth corresponding to the microwave RL value below -20 dB was up to 8.24 GHz (9.76-18 GHz). This indicates that α-Fe2O3@D composite can be a lightweight and stable material; because of the low density of De (1.9-2.3 g/cm3), the density of α-Fe2O3@D composite material is lower than that of α-Fe2O3 (5.18 g/cm3). We found that the combination of the magnetic loss of sea-urchin-like α-Fe2O3 and the dielectric loss of De has the most dominant role in electromagnetic wave absorption and loss. We focused on comparing the absorbing properties before and after the formation of sea-urchin-like α-Fe2O3 and explain in detail the effects of the structure and crystal shape of this novel composite on the absorbing properties.

Modified gingivoplasty for hereditary gingival fibromatosis: two case reports.

BACKGROUND: Hereditary gingival fibromatosis (HGF) is characterized by sub-epithelial fibromatosis of keratinized gingiva resulting in a fibrotic enlargement of keratinized gingiva. The treatment choice is gingivectomy, which can be performed with an internal or external bevel incision conventionally. However, both techniques can hardly resume the natural status of gingiva, and have a certain recurrence rate, especially in the cases which have limited width of attached gingiva. CASE DESCRIPTION: Two cases of HGF with the chief complaint of difficulty in mastication, pronunciation, and poor esthetics were presented. After the initial periodontal therapy, a novel gingivoplasty modified with a crevicular incision was applied. A full thickness flap above the mucogingival junction and a split flap below the junction were raised. Then, fibrotic connective tissue was completely eliminated and keratinized gingival epithelium was preserved. The fibrotic alveolar bone was shaped by handpiece and bur. Finally, the flap was apically repositioned and sutured. Twelve months after surgery, the gingiva recovered with normal color, contour and consistency. CONCLUSIONS: Compared to traditional gingivectomy, modified gingivoplasty which focuses on eliminating pathological fibrotic connective tissue can completely resume the natural appearance of gingiva and demonstrate no tendency of recurrence.

Bacterial community changes and their responses to nitrogen addition among different alpine grassland types at the eastern edge of Qinghai-Tibetan Plateau.

Soil microbes play a fundamental role in maintaining nutrient biogeochemical cycles. To understand the distribution of soil bacterial communities on grassland plateaus, high-throughput sequencing was used to compare bacterial communities in soils from swamp meadows (SM), alpine meadows (AM), alpine steppes (AS), and desert steppes (DS) at the eastern edge of the Qinghai-Tibetan Plateau (QTP) in China. We then compared response to nitrogen addition between SM and DS soils in microcosms. Bacterial α-diversity decreased from SM > AM > AS > DS. Variations in soil properties across grassland types was associated with different soil bacterial communities corresponding to bacterial species associated with nutrient cycles to those associated with degradation. Soil moisture, pH, and total phosphorus were the main drivers of these differences. Nitrogen addition decreased bacterial diversity but had inconsistent effects on soil bacterial communities in SM and DS, which may also indicate that different alpine grassland soil types have unique bacterial communities. Alpine grassland degradation significantly affects bacterial communities, and the response to nitrogen addition depends on the alpine grassland type. These results allow for better predictions of soil bacteria community-level responses to geochemical and environmental change in alpine areas.

Hydrogen regulates the M1/M2 polarization of alveolar macrophages in a rat model of chronic obstructive pulmonary disease.

OBJECTIVE: Chronic obstructive pulmonary disease (COPD) is a respiratory disease with high morbidity and mortality worldwide, so far there is no ideal treatment method. Previous studies have shown that hydrogen (H2) is involved in the treatment of COPD as an antioxidant. In this study, the effect of H2 on M1/M2 polarization of alveolar macrophages in COPD rats was observed, and its anti-inflammatory mechanism was further elucidated. Methods: Twenty-four Sprague-Dawley rats were randomly divided into three groups including the control, COPD and H2 group. A rat model of COPD was established by cigarette exposure combined with lipopolysaccharide (LPS) induction. H2 therapy was administered 2 hours per day for 14 days. Lung function and pathology were assessed. The levels of interleukin (IL)-6, tumor necrosis factor (TNF)-α, transforming growth factor (TGF)-ß1 and IL-10 in bronchoalveolar lavage fluid (BALF) and lung tissue were measured by enzyme-linked immunosorbent assay. The mRNA, protein expression and immunoreactivity of inducible nitric oxide synthase (iNOS) and arginase (Arg)-1 in lung were observed by quantitative real-time PCR, western blot and immunohistochemistry. Results: Compared with the control rats, there were a significant decline in lung function, a marked inflammatory infiltration and pulmonary parenchymal remodeling and the increases of IL-6, TNF-α and TGF-ß1 levels in BALF and lung tissue, but a lower expression of IL-10 in COPD rats. The iNOS mRNA and protein expression, as well as its optical density (OD), were increased significantly in lung tissue, while those of Arg-1 decreased significantly. H2 treatment improved the lung function and the parenchymal inflammation, reversed the increased levels of IL-6, TNF-α and TGF-ß1, and the lower IL-10. Meanwhile, H2 also down-regulated the expression of iNOS, but up-regulated expression of Arg-1 in lung tissue. Conclusion: H2 reduces inflammation in the lung of COPD, which may be related to its inhibition of M1 type polarization and activation of M2 type polarization of alveolar macrophage.