Plasma-Constructed Co2P-Ni2P Heterointerface for Electro­Upcycling of Polyethylene Terephthalate Plastic to Co-Produce Hydrogen and Formate.

Integrating electrochemical upcycling of polyethylene-terephthalate (PET) and the hydrogen evolution reaction (HER) is an energy-saving approach for electrolytic hydrogen (H2) production, along with the coproduction of formate. Herein, a novel and rapid strategy of cold plasma phosphating is employed to synthesize Co2P-Ni2P heterointerface decorated on carbon cloth (Co2P-Ni2P/CC) to catalyze H2 generation and reform PET. Notably, the obtained Co2P-Ni2P/CC exhibits eminent ethylene glycol oxidation reaction (EGOR) and HER activities, effectuating low potentials of merely 1.300 and -0.112 V versus RHE at 100 mA cm-2 for the EGOR and HER, respectively, also attaining an ultralow cell bias of 1.300 V at 10 mA cm-2 for EG oxidation assisted-water splitting. DFT and characterization results validate that the as-formed built-in electric fields in the Co2P-Ni2P heterointerface can accelerate electrons transfer and deepen structural self-reconstruction, thereby boosting effectively water dissociation and ethylene glycol (EG) dehydrogenation. Impressively, coupling HER with PET-derived EG-to-formate in a flow-cell electrolyzer assembled with Co2P-Ni2P/CC pair achieves an intriguing formate Faradaic efficiency of 90.6% and an extraordinary stable operation of over 70 h at 100 mA cm-2. The work exemplifies a facile and effective strategy for synthesizing metal phosphides electrocatalysts with extraordinary performance toward H2 generation of water splitting and recycling of PET.

Regionalizing ovarian cancer cytoreduction to high-volume centers and the impact on patient travel in New York State.

OBJECTIVE: To evaluate the theoretical impact of regionalizing cytoreductive surgery for ovarian cancer (OC) to high-volume facilities on patient travel. METHODS: We retrospectively identified patients with OC who underwent cytoreduction between 1/1/2004-12/31/2018 from the New York State Cancer Registry and Statewide Planning and Research Cooperative System. Hospitals were stratified by low-volume (<21 cytoreductive surgical procedures for OC annually) and high-volume centers (≥21 procedures annually). A simulation was performed; outcomes of interest were driving distance and time between the centroid of the patient's residence zip code and the treating facility zip code. RESULTS: Overall, 60,493 patients met inclusion criteria. Between 2004 and 2018, 210 facilities were performing cytoreductive surgery for OC in New York; 159 facilities (75.7%) met low-volume and 51 (24.3%) met high-volume criteria. Overall, 10,514 patients (17.4%) were treated at low-volume and 49,979 (82.6%) at high-volume facilities. In 2004, 78.2% of patients were treated at high-volume facilities, which increased to 84.6% in 2018 (P < .0001). Median travel distance and time for patients treated at high-volume centers was 12.2 miles (IQR, 5.6-25.5) and 23.0 min (IQR, 15.2-37.0), and 8.2 miles (IQR, 3.7-15.9) and 16.8 min (IQR, 12.4-26.0) for patients treated at low-volume centers. If cytoreductive surgery was centralized to high-volume centers, median distance and time traveled for patients originally treated at low-volume centers would be 11.2 miles (IQR, 3.8-32.3; P < .001) and 20.2 min (IQR, 13.6-43.0; P < .001). CONCLUSIONS: Centralizing cytoreductive surgery for OC to high-volume centers in New York would increase patient travel burden by negligible amounts of distance and time for most patients.

Construction of Coordination Spaces with Narrow Pore Windows in Co-Based Metal-Organic Frameworks toward CO2/N2 Separation.

Carbon emission reduction is an important measure to mitigate the greenhouse effect, which has become a hotspot in global climate change research. To contribute to this, here, we fabricated two Co-based metal-organic frameworks (Co-MOFs), namely, {[Co3(NTB)2(bib)]·(DMA)2·(H2O)4}n (DZU-211) and {[Co3(NTB)2(bmip)]·(DMA)2}n (DZU-212) (H3NTB = 4,4',4″-nitrilotribenzoic acid, bib = 1,4-bis(imidazol-1-yl)-butane, bmip = 1,3-bis(2-methyl-1H-imidazol-1-yl)propane) to realize efficient CO2/N2 separation by dividing coordination spaces into suitable pores with narrow windows. DZU-211 reveals a 3D open porous framework, while DZU-212 exhibits a 3D double-fold interpenetrated structure. The two MOFs both possess large coordination spaces and small open pore sizes, via the bib ligand insertion and framework interpenetration, respectively. Comparatively, DZU-211 reveals superior selective CO2 uptake properties due to its more suitable pore characteristics. Gas sorption experiments show that DZU-211 has a CO2 uptake of 52.6 cm3 g-1 with a high simulated CO2/N2 selectivity of 101.7 (298 K, 1 atm) and a moderate initial adsorption heat of 38.1 kJ mol-1. Moreover, dynamic breakthrough experiments confirm the potential application of DZU-211 as a CO2 separation material from postcombustion flue gases.

Core-shell cobalt-iron@N-doped carbon: A high-performance cathode material for lithium-sulfur batteries.

Lithium-sulfur batteries hold great promise as energy storage systems, but the shuttle effect of lithium polysulfides (LiPS) and large volume variation limit their capacity and cycle life. We have developed CoFe alloy wrapped in N-doped porous carbon spheres (e-CF@NC) with a core-shell structure through simple copolymerization and pyrolysis. The nitrogen-doped porous carbon shell provides electron and ion transport channels and more active sites for electrolyte ion adsorption. The high chemically stable carbon can limit the segregation of polysulfides, further improving the battery cycling stability. Besides, the inside CoFe alloy particles catalyze the conversion between LiPS and Li2S, speeding up reaction kinetics and reducing solvation of active sites. Consequently, lithium-sulfur batteries with e-CF@NC-2 as the cathode display a high initial specific capacity of 1146 mA h g-1 at 0.1 C, excellent rate performance (891 mA h g-1 at 1 C, 741 mA h g-1 at 2 C), and satisfied cycle stability (average capacity decay rate of 0.033% per cycle at 1 C for 300 cycles), demonstrating significant application potential.

Integrated analysis of N6-methyladenosine- and 5-methylcytosine-related long non-coding RNAs for predicting prognosis in cervical cancer.

BACKGROUND: N6-methyladenosine (m6A) and 5-methylcytosine (m5C) play a role in modifying long non-coding RNAs (lncRNAs) implicated in tumorigenesis and progression. This study was performed to evaluate prognostic value of m6A- and m5C-related lncRNAs and develop an efficient model for prognosis prediction in cervical cancer (CC). METHODS: Using gene expression data of TCGA set, we identified m6A- and m5C-related lncRNAs. Consensus Clustering Analysis was performed for samples subtyping based on survival-related lncRNAs, followed by analyzing tumor infiltrating immune cells (TIICs). Optimal signature lncRNAs were obtained using lasso Cox regression analysis for constructing a prognostic model and a nomogram to predict prognosis. RESULTS: We built a co-expression network of 23 m6A-related genes, 15 m5C-related genes, and 62 lncRNAs. Based on 9 m6A- and m5C-related lncRNAs significantly associated with overall survival (OS) time, two molecular subtypes were obtained, which had significantly different OS time and fractions of TIICs. A prognostic model based on six m6A- and m5C-related signature lncRNAs was constructed, which could dichotomize patients into two risk subgroups with significantly different OS time. Prognostic power of the model was successfully validated in an independent dataset. We subsequently constructed a nomogram which could accurately predict survival probabilities. Drug sensitivity analysis found preferred chemotherapeutic agents for high and low-risk patients, respectively. CONCLUSION: Our study reveals that m6A- and m5C-related lncRNAs are associated with prognosis and immune microenvironment of CC. The m6A- and m5C-related six-lncRNA signature may be a useful tool for survival stratification in CC and open new avenues for individualized therapies.

Identification of the shared gene signatures and molecular pathways in systemic lupus erythematosus and diffuse large B-cell lymphoma.

BACKGROUND: Diffuse large B-cell lymphoma (DLBCL) incidence is higher in systemic lupus erythematosus (SLE) patients than the general population, but the molecular mechanisms behind this link remain ambiguous. The aim of this study was to investigate shared gene signatures and molecular pathways between SLE and DLBCL. METHODS: We procured expression profiles of SLE and DLBCL from public databases and identified common differentially expressed genes (DEGs). Functional pathway enrichment and protein-protein interaction (PPI) analyses were performed on these shared genes. The molecular complex detection technology (MCODE) and eXtreme Gradient Boosting (XGBoost) machine learning algorithm were used to select core shared genes, followed by Gene Set Enrichment Analysis (GSEA) and immune infiltration analysis. RESULTS: We identified 54 DEGs as shared genes, among which CD177, CEACAM1, GPR84 and IFIT3 were identified as core shared genes. These genes showed strong associations with inflammatory and immune response pathways. We found a significant positive correlation between GPR84 and IFIT3 expression levels and the immune microenvironment. Decreased expression levels of GPR84 and IFIT3 were linked to enhanced immune therapy sensitivity, potentially due to lower dysregulation scores during low expression. We also discovered that TP53 mutations might elevate CD177 and GPR84 expression and that reduced expression levels of GPR84 and IFIT3 were linked with better overall survival and progression-free survival in DLBCL patients. CONCLUSIONS: Our study provides valuable insights into the shared molecular mechanisms underpinning the pathogenesis of SLE and DLBCL. These findings could potentially offer new biomarkers and therapeutic targets for SLE and DLBCL.

Sandwich Fibrous PEG Encapsulations for Thermal Energy Storage.

Phase change materials (PCMs) textiles have been developed for personal thermal management (PTM) while limited loading amount of PCMs in textiles reduced thermal buffering effect. In this work, we proposed a sandwich fibrous encapsulation to store polyethylene glycol (PEG) with PEG loading amount of 45 wt %, which consisted of polyester (PET) fabrics with hydrophobic coating as protection layers, polyurethane (PU) nanofibrous membranes as barrier layers and PEG-loaded viscose fabric as a PCM-loaded layer. The leakage was totally avoided by controlling weak interfacial adhesion between protection layer and melting PEG. The sandwich fibrous PEG encapsulations had an overall melting enthalpy value ranging from 50 J/g to 78 J/g and melting points ranging from 20 °C to 63 °C by using different PEGs. Besides, introduction of Fe microparticles in PCM-loaded layer enhanced thermal energy storage efficiency. We believe that the sandwich fibrous PEG encapsulation has a great potential in various fields.

The star target in SLE: IL-17.

PURPOSE: The purpose of this review is to discuss the significance of IL-17 in SLE and the potential of IL-17-targeted therapy. BACKGROUND: Systemic lupus erythematosus (SLE) is an autoimmune disease that can affect many organs and tissues throughout the body. It is characterized by overactive B and T cells and loss of immune tolerance to autoantigens. Interleukin-17 (IL-17) is a cytokine that promotes inflammation and has been implicated in the pathogenesis of several autoimmune diseases as well as inflammatory diseases. In in vitro cellular experiments in lupus susceptible mice or SLE patients, there is substantial evidence that IL-17 is a highly promising therapeutic target. METHODS: We searched papers from PubMed database using the search terms, such as interleukin-17, systemic lupus erythematosus, treatment targets, T cells, lupus nephritis, and other relevant terms. RESULTS: We discuss in this paper the molecular mechanisms of IL-17 expression, Th17 cell proliferation, and the relationship between IL-17 and Th17. The significance of IL-17 in SLE and the potential of IL-17-targeted therapy are further discussed in detail. CONCLUSION: IL-17 has a very high potential for the development as a star target in SLE.

Sulfur-Bridged Co(II)-Thiacalix[4]arene Metal-Organic Framework as an Electrochemical Sensor for the Determination of Toxic Heavy Metals.

A novel sulfur-bridged metal-organic framework (MOF) [Co(TIC4R-I)0.25Cl2]·3CH3OH (Co-TIC4R-I) based on thiacalix[4]arene derivatives was successfully obtained using a solvothermal method. Remarkably, adjacent TIC4R-I ligands were linked via Co(II) cations to form a three-dimensional (3D) microporous architecture. Subsequently, Co-TIC4R-I was modified on a glassy carbon electrode (Co-TIC4R-I/GCE) to produce an electrochemical sensor for the detection of heavy-metal ions (HMIs), namely, Cd2+, Pb2+, Cu2+, and Hg2+, in aqueous solutions. It was found that Co-TIC4R-I/GCE exhibited wide linear detection ranges of 0.10-17.00, 0.05-16.00, 0.05-10.00, and 0.80-15.00 µM for Cd2+, Pb2+, Cu2+, and Hg2+, respectively, in addition to low limit of detection (LOD) values of 0.017, 0.008, 0.016, and 0.007 µM. Moreover, the fabricated sensor employed for the simultaneous detection of these metals has achieved LOD values of 0.0067, 0.0027, 0.0064, and 0.0037 µM for Cd2+, Pb2+, Cu2+, and Hg2+, respectively. The sensor also exhibited satisfactory selectivity, reproducibility, and stability. Furthermore, the relative standard deviation (RSD) values of Cd2+, Pb2+, Cu2+, and Hg2+ were 3.29, 3.73, 3.11, and 1.97%, respectively. Moreover, the fabricated sensor could sensitively detect HMIs in various environmental samples. The high performance of the sensor was attributed to its sulfur adsorption sites and abundant phenyl rings. Overall, the sensor described herein provides an efficient method for the determination of extremely low concentrations of HMIs in aqueous samples.

Effects of foliar applications of Brassinolide and Selenium on the accumulation of Arsenic and Cadmium in rice grains and an assessment of their health risk.

Arsenic and cadmium pose a potential health risk to human beings via rice grain consumption. In the current study, a pot experiment was conducted to evaluate the effect of Br (5 mM and 20 mM) and Se (1 mM) at rice tillering and filling stages on Cd and As accumulation in rice grain and their health risk indices. The results showed that Br or Se applications at different stages of rice improved the photosynthesis, reduce MDA content in flag leaves by 17.41%-38.65%, increased rice biomass and grain yield by 10.50%-29.94% and 10.50%-36.56%, and enhanced grain N and P uptake by 3.25%-34.90%, and 22.98%-72.05%, respectively. Applications of Br and Se effectively decreased Cd and As concentration in rice grain by 31.74%-86.97% and 16.42%-81.13% respectively. Compared to the individual treatment, combined 20 mM Br and 1 mM Se at the filling stage showed the lowest accumulation of As (0.149 mg·kg-1) and Cd (0.105 mg·kg-1) in grain, and its health risk index was below the acceptable limits (HRI < 1). This implies that application of Br and Se at the filling stage is a promising strategy for the safe production of rice in As and Cd co-contaminated regions.

In this study, foliar applications of Br and Se at the grain filling and tillering stage demonstrate their effect on As and Cd accumulation. The findings showed that Br and Se resulted in the Se concentration in grains reaching the Se-enriched level, and the accumulation of As and Cd was the lowest. Furthermore, the application of Br and Se decreased lipid peroxidation, promoted N and P uptake, and increased the rate of photosynthesis in the rice plants, which resulted in increasing rice growth and grain yield. The HRI of heavy metals was below the acceptable limits after application of Br and Se.

Ssc-miR-21-5p regulates endometrial epithelial cell proliferation, apoptosis and migration via the PDCD4/AKT pathway.

Endometrial receptivity plays a vital role in successful embryo implantation in pigs. MicroRNAs (miRNAs), known as regulators of gene expression, have been implicated in the regulation of embryo implantation. However, the role of miRNAs in endometrial receptivity during the pre-implantation period remains elusive. In this study, we report that the expression level of Sus scrofa (ssc)-miR-21-5p in porcine endometrium tissues was significantly increased from day 9 to day 12 of pregnancy. Knockdown of ssc-miR-21-5p inhibited proliferation and migration of endometrial epithelial cells (EECs), and induced their apoptosis. We verified that programmed cell death 4 (PDCD4) was a target gene of ssc-miR-21-5p. Inhibition of PDCD4 rescued the effect of ssc-miR-21-5p repression on EECs. Our results also revealed that knockdown of ssc-miR-21-5p impeded the phosphorylation of AKT (herein referring to AKT1) by targeting PDCD4, which further upregulated the expression of Bax, and downregulated the levels of Bcl2 and Mmp9. Furthermore, loss of function of Mus musculus (mmu)-miR-21-5p in vivo resulted in a decreased number of implanted mouse embryos. Taken together, knockdown of ssc-miR-21-5p hampers endometrial receptivity by modulating the PDCD4/AKT pathway.

Autologous bone fragments for skull reconstruction after microvascular decompression.

BACKGROUND: Various methods are used to reconstruct the skull after microvascular decompression, giving their own advantages and disadvantages. The objective of this study was to evaluate the efficacy of using autologous bone fragments for skull reconstruction after microvascular decompression. METHODS: The clinical and follow-up data of 145 patients who underwent microvascular decompression and skull reconstruction using autologous bone fragments in our hospital from September 2020 to September 2021 were retrospectively analyzed. RESULTS: Three patients (2.06%) had delayed wound healing after surgery and were discharged after wound cleaning. No patient developed postoperative cerebrospinal fluid leakage, incisional dehiscence, or intracranial infection. Eighty-five (58.62%) patients underwent follow-up cranial computed tomography at 1 year postoperatively, showed excellent skull reconstruction. And, the longer the follow-up period, the more satisfactory the cranial repair. Two patients underwent re-operation for recurrence of hemifacial spasm, and intraoperative observation revealed that the initial skull defect was filled with new skull bone. CONCLUSION: The use of autologous bone fragments for skull reconstruction after microvascular decompression is safe and feasible, with few postoperative wound complications and excellent long-term repair results.

Abnormal chromosomes identification using chromosomal microarray.

In this study, we presented a case series to highlight the chromosomal microarray (CMA) in identifying chromosomal abnormalities which is undetectable by conventional karyotyping or known abnormal chromosomes without clear diagnosis. Extensive studies showed that CMA was gradually accepted as a prenatal invasive testing during pregnancy. The aim of this study was to evaluate the diagnostic effect of CMA for foetuses with abnormal chromosomes unrecognised by conventional karyotyping. Pregnant women who need prenatal diagnosis with all indications were enrolled in this study. For aberrant cytogenetic findings that cannot be defined by routine karyotyping, single nucleotide polymorphism array (SNP-array) was used. Six cases with abnormal karyotype were included in the study. With higher resolution of translocation breakpoints, CMA could detect smaller chromosomal imbalances that were undetectable by karyotyping. This study highlights the value of CMA for the detection of submicroscopic abnormalities in foetuses that cannot be detected by conventional karyotyping. Impact StatementWhat is already known on this subject? Chromosomal microarray (CMA) offers additional diagnostic benefits by revealing submicroscopic imbalances or copy number variations (CNVs) that are too small to be identified on a standard G-banded chromosome preparation.What do the results of this study add? We added a case series to highlight the CMA in identifying chromosomal abnormalities not detectable by conventional karyotyping or known abnormal chromosomes without clear diagnosis.What are the implications of these findings for clinical practice and/or further research? This study highlights the value of CMA in the case of associated foetuses with submicroscopic abnormalities that cannot detect by conventional karyotyping.

Efficiency of Noninvasive Prenatal Testing for Sex Chromosome Aneuploidies.

OBJECTIVE: This study was designed to investigate the efficiency of noninvasive prenatal testing (NIPT) for screening fetal sex chromosome aneuploidies (SCAs) through sequencing of cell-free DNA in maternal plasma. METHODS: This is a retrospective study on the positive NIPT results for SCAs collected from our hospital between January 2012 and December 2018. Samples with positive NIPT results for SCAs were then confirmed by prenatal or postnatal karyotyping analysis. RESULTS: After cytogenetic analysis, abnormal karyotypes were confirmed in 104 cases and the overall positive predictive value (PPV) of NIPT for SCAs was 43.40% (102/235). The most frequently detected karyotypes included 47,XXY (n = 42), 47,XXX (n = 20), 47,XYY (n = 16), and 45,X (n = 2). Meanwhile, 10 cases were confirmed with mosaic karyotype 45,X/46,XX and 14 cases with numerical or structural chromosome abnormalities, including a double trisomy 48,XXX,+18. Cytogenetic results from the other 131 cases showed normal XX or XY, which were discordant with NIPT results. Upon analysis of parental karyotypes, 29 (12.34%) showed false positivity in NIPT results that were caused by maternal sex chromosome abnormalities. CONCLUSION: NIPT is an effective screening tool for SCA with a PPV of 43.40%. Maternal karyotype abnormalities occurred in 12.34% of the cases with abnormal NIPT. Diagnostic testing of the fetus and the mother are recommended.

Soluble receptor for advanced glycation end-products promotes angiogenesis through activation of STAT3 in myocardial ischemia/reperfusion injury.

Soluble receptor for advanced glycation end-products (sRAGE), which exerts cardioprotective effect through inhibiting cardiomyocyte apoptosis and autophagy during ischemia/reperfusion (I/R) injury, is also known to enhance angiogenesis in post-ischemic reperfusion injury-critical limb ischemia (PIRI-CLI) mice. However, whether sRAGE protects the heart from myocardial I/R injury via promoting angiogenesis remains unclear. Myocardial model of I/R injury was conducted by left anterior descending (LAD) ligation for 30 min and reperfusion for 2 weeks in C57BL/6 mice. And I/R injury in cardiac microvascular endothelial cells (CMECs) was duplicated by oxygen and glucose deprivation. The results showed that I/R-induced cardiac dysfunction, inflammation and myocardial fibrosis were all reversed by sRAGE. CD31 immunohistochemistry staining showed that sRAGE increased the density of vessels after I/R injury. The results from cultured CMECs showed that sRAGE inhibited apoptosis and increased proliferation, migration, angiogenesis after exposure to I/R. These effects were dependent on signal transducer and activator of transcription 3 (STAT3) pathway. Together, the present study demonstrated that activation of STAT3 contributed to the protective effects of sRAGE on myocardial I/R injury via promoting angiogenesis.

Assembly of Two Self-Interpenetrating Metal-Organic Frameworks Based on a Trigonal Ligand: Syntheses, Crystal Structures, and Properties.

Two self-interpenetrating metal-organic frameworks (MOFs) 1 and 2 were designed and constructed through the coordination self-assembly of transition metal nodes and a trigonal ligand. They both exhibit interesting three-dimensional constructions with the 1 + 2 self-locked mode. Because of the outstanding moisture susceptibility and luminescence property, MOF 1 has a potential detectability toward nitrofurantoin (NFT) in water. More importantly, MOF 1 can efficiently monitor NFT in bovine serum. Taking into account of Lewis basic sites in the skeleton, MOF 2 can be implemented as an outstanding heterogeneous catalyst for the Knoevenagel reaction. Furthermore, they both reveal excellent circularity and an application effect for five cycles.

Nonlinear-Optical Crystal Rb3YB6O12 with Condensed B5O10 Blocks That Exhibits an Intriguing Structural Arrangement and a Short Ultraviolet Absorption Edge.

Nonlinear-optical (NLO) crystals, which can regulate the laser wavelength through a cascading second-harmonic-generation technique, have been widely utilized in the field of optoelectronics. In this work, we grew the NLO borate crystal Rb3YB6O12 (RYBO) using the spontaneous crystallization method. RYBO crystallizes in a chiral trigonal space group of R32 with a new type of structural arrangement built from Y-O short chains and B5O10 groups. It is significantly different from the known structure of chemical analogues Rb3REB6O12 (RE = Nd, Eu) not only in the halved unit cell parameter but also in the Y-O connection manner. The NLO response of RYBO is about 0.8KDP, 8-fold larger than that of KB5O8·4H2O with the same B5O10 groups because of the coexistence of two NLO-active units of the distorted YO6 octahedra and B5O10 anions. Thanks to the short ultraviolet (UV) cutoff, RYBO may have potential NLO applications in the UV and even deep-UV spectral regions.

Pillar-Layered Metal-Organic Frameworks Based on a Hexaprismane [Co6(µ3-OH)6] Cluster: Structural Modulation and Catalytic Performance in Aerobic Oxidation Reaction.

Embedding a functional metal-oxo cluster within the matrix of metal-organic frameworks (MOFs) is a feasible approach for the development of advanced porous materials. Herein, three isoreticular pillar-layered MOFs (Co6-MOF-1-3) based on a unique [Co6(µ3-OH)6] cluster were designed, synthesized, and structurally characterized. For these Co6-MOFs, tuning of the framework backbone was facilitated due to the existence of second ligands, which results in adjustable apertures (8.8 to 13.4 Å) and high Brunauer-Emmett-Teller surfaces (1896-2401 m2 g-1). As the [Co6(µ3-OH)6] cluster has variable valences, these MOFs were then utilized as heterogeneous catalysts for the selective oxidation of styrene and benzyl alcohol, showing high conversion (>90%) and good selectivity. The selectivity of styrene to styrene oxide surpassed 80% and that of benzyl alcohol to benzaldehyde was up to 98%. The calculated TOF values show that the increase of reaction rate is positively correlated with the enlargement of pore sizes in these MOFs. Further, a stability test and cycling experiment proved that these Co6-MOFs have well-observed stability and recyclability.

Heavy metal elimination based on metal organic framework highly loaded on flexible nanofibers.

Efficient adsorbents for removal heavy metals are extensively urgent in modern society. Metal-organic frameworks (MOFs) with abundant porosity and tunable structure make it potential to access the advantages of high permeability and adsorbability in water pollutant control. However, MOFs nanoparticles inconvenient to recycle in solution hinder its application in water pollutant treatment. Herein, we report an in-situ growth and large-scalable manufacturing method to fabricate ZIF-8 nanoparticles on electrospun polyacrylonitrile (PAN) nanofibers membrane (ZIF-8/PAN NF) by hot pressing. Consequently, the prepared ZIF-8/PAN NF possesses high loading, uniform dispersion and large-scalable area as well as good flexibility. The fabricated ZIF-8/PAN NF exhibits excellent performance with fast flux (12,000 L/(m2h)) and high filtration efficiency (96.5%) for Cu2+ in dynamic adsorption. Additionally, adsorption and electrochemistry are introduced simultaneously. The Cu2+ removal rate of ZIF-8/PAN NF reaches 34.1% in 4 min with combination of adsorption and electrochemistry. While it is 29.2% for Cu2+ elimination in adsorption. Given the outstanding performance and easy manufacture, this study might bring MOFs powder to eliminate water pollution into practical application.

Unified Classification of Bacterial Colonies on Different Agar Media Based on Hyperspectral Imaging and Machine Learning.

A universal method by considering different types of culture media can enable convenient classification of bacterial species. The study combined hyperspectral technology and versatile chemometric algorithms to achieve the rapid and non-destructive classification of three kinds of bacterial colonies (Escherichia coli, Staphylococcus aureus and Salmonella) cultured on three kinds of agar media (Luria-Bertani agar (LA), plate count agar (PA) and tryptone soy agar (TSA)). Based on the extracted spectral data, partial least squares discriminant analysis (PLS-DA) and support vector machine (SVM) were employed to established classification models. The parameters of SVM models were optimized by comparing genetic algorithm (GA), particle swarm optimization (PSO) and grasshopper optimization algorithm (GOA). The best classification model was GOA-SVM, where the overall correct classification rates (OCCRs) for calibration and prediction of the full-wavelength GOA-SVM model were 99.45% and 98.82%, respectively, and the Kappa coefficient for prediction was 0.98. For further investigation, the CARS, SPA and GA wavelength selection methods were used to establish GOA-SVM simplified model, where CARS-GOA-SVM was optimal in model accuracy and stability with the corresponding OCCRs for calibration and prediction and the Kappa coefficients of 99.45%, 98.73% and 0.98, respectively. The above results demonstrated that it was feasible to classify bacterial colonies on different agar media and the unified model provided a continent and accurate way for bacterial classification.