Condensed Supramolecular Helices: The Twisted Sisters of DNA.

Condensation of DNA helices into hexagonally packed bundles and toroids represents an intriguing example of functional organization of biological macromolecules at the nanoscale. The condensation models are based on the unique polyelectrolyte features of DNA, however here we could reproduce a DNA-like condensation with supramolecular helices of small chiral molecules, thereby demonstrating that it is a more general phenomenon. We show that the bile salt sodium deoxycholate can form supramolecular helices upon interaction with oppositely charged polyelectrolytes of homopolymer or block copolymers. At higher order, a controlled hexagonal packing of the helices into DNA-like bundles and toroids could be accomplished. The results disclose unknown similarities between covalent and supramolecular non-covalent helical polyelectrolytes, which inspire visionary ideas of constructing supramolecular versions of biological macromolecules. As drug nanocarriers the polymer-bile salt superstructures would get advantage of a complex chirality at molecular and supramolecular levels, whose effect on the nanocarrier assisted drug efficiency is a still unexplored fascinating issue.

The Effect of Number of Arms on the Aggregation Behavior of Thermoresponsive Poly(N-isopropylacrylamide) Star Polymers.

The thermoresponsive nature of aqueous solutions of poly(N-isopropylacrylamide) (PNIPAAM) star polymers containing 2, 3, 4, and 6 arms has been investigated by turbidity, dynamic light scattering, rheology, and rheo-SALS. Simulations of the thermosensitive nature of the single star polymers have also been conducted. Some of the samples form aggregates even at temperatures significantly below the lower critical solution temperature (LCST) of PNIPAAM. Increasing concentration and number of arms promotes associations at low temperatures. When the temperature is raised, there is a competition between size increase due to enhanced aggregation and a size reduction caused by contraction. Monte Carlo simulations show that the single stars contract with increasing temperature, and that this contraction is more pronounced when the number of arms is increased. Some samples exhibit a minimum in the turbidity data after the initial increase at the cloud point. The combined rheology and rheo-SALS data suggest that this is due to a fragmentation of the aggregates followed by re-aggregation at even higher temperatures. Although the 6-arm star polymer aggregates more than the other stars at low temperatures, the more compact structure renders it less prone to aggregation at temperatures above the cloud point.

Effect of Temperature and Ionic Strength on Micellar Aggregates of Oppositely Charged Thermoresponsive Block Copolymer Polyelectrolytes.

The self-assembly of two oppositely charged diblock copolymers that have a common thermosensitive nonionic block of poly(N-isopropylacrylamide) (pNIPAAM) has been investigated. The effect of the mixing ratio and total polymer concentrations on the self-assembly of the components and on the phase stability of the mixtures was studied by dynamic light scattering, electrophoretic mobility, and turbidimetry measurements in water at 20 °C. The effect of the competing electrostatic and hydrophobic interactions on the nanostructure of negatively charged electrostatically self-assembled micelles bearing a pNIPAAM corona was investigated by small-angle X-ray scattering (SAXS). The electrostatic and hydrophobic interactions were controlled independently by tuning the ionic strength (from pure water to 50 mM NaCl) and the temperature (20-50 °C) of the investigated mixtures. The SAXS data could be fitted by a spherical micelle model, which has a smoothly decaying radial profile and a Gaussian star term that describes the internal structure of the micellar structures and possible attractive interactions between the polymer chains. At high temperature, a cluster structure factor was included for describing the formation of bulky clusters of the formed micelles. At low temperature and ionic strength, the formation of micelles with a coacervate core and hydrated pNIPAAM shell was observed. The structural evolution of the self-assembled micelles with increasing ionic strength and temperature could be followed, and finally at high ionic strength and temperature, the formation of inverted micelles with a hydrophobic core and polyelectrolyte shell could be identified.

Effect of PCL end-groups on the self-assembly process of Pluronic in aqueous media.

Understanding self-assembly of amphiphilic copolymers in aqueous solution is an important issue in many areas, e.g., in order to tailor-make carriers for drugs and genes. We have synthesized modified versions of the copolymer of type PEO-PPO-PEO (Pluronic, F127), with short (PCL(5)) or long (PCL(11)) PCL blocks at both ends. Turbidity, dynamic light scattering (DLS), small angle neutron scattering (SANS), and rheology measurements were carried out on dilute aqueous solutions of these polymers to investigate their self-assembly behavior. The DLS results clearly show that both micellization and inter-micellization can be controlled by polymer concentration, temperature, and length of the PCL block. The interplay between unimers, micelles, and clusters of micelles could be monitored and the size and size distribution of the species were determined. The SANS data could be portrayed by a spherical core-shell model at all considered conditions of temperature and concentration for F127 and PCL(5) apart from F127 at the lowest temperature measured. The SANS data for PCL(11) were described by a spherical core-shell model at low temperatures, whereas at elevated temperatures asymmetric sub-structures appeared and a cylindrical core-shell model was employed in the analysis of the data. The appearance of pronounced correlation peaks at elevated temperatures signalizes marked intermicellar interactions. The shear viscosity data revealed a minor shear thinning effect, suggesting that the interchain structures are rather stable and not easily disrupted. The work shows that PCL-modification of Pluronic has a large influence on the self-assembly process and on the final structure of the assemblies.

Treatment of Francisella infections via PLGA- and lipid-based nanoparticle delivery of antibiotics in a zebrafish model.

We tested the efficiency of 2 different antibiotics, rifampicin and oxolinic acid, against an established infection caused by fish pathogen Francisella noatunensis ssp. orientalis (F.n.o.) in zebrafish. The drugs were tested in the free form as well as encapsulated into biodegradable nanoparticles, either polylactic-co-glycolic acid (PLGA) nanoparticles or nanostructured lipid carriers. The most promising therapies were PLGA-rifampicin nanoparticles and free oxolinic acid; the PLGA nanoparticles significantly delayed embryo mortality while free oxolinic acid prevented it. Encapsulation of rifampicin in both PLGA and nanostructured lipid carriers enhanced its efficiency against F.n.o. infection relative to the free drug. We propose that the zebrafish model is a robust, rapid system for initial testing of different treatments of bacterial diseases important for aquaculture.

Application of thermoresponsive PNIPAAM-b-PAMPTMA diblock copolymers in siRNA delivery.

Gene knockdown has emerged as an important tool for cancer gene therapy as well as for viral infections and dominantly inherited genetic disorders. The generation of suitable siRNA delivery systems poses some challenges, namely, to avoid nuclease degradation, to surpass the cytoplasmic membrane, and to release the nucleic acids into the cytosol. Aiming at evaluating the ability of thermoresponsive block copolymers formed by units of N-isopropylacrylamide and of (3-acrylamidopropyl)trimethylammonium chloride to efficiently deliver siRNAs, an extensive study was performed with four different copolymers using a human fibrosarcoma cell line as cell model. The silencing ability and cytotoxicity of the generated copolymer-based siRNA delivery systems were found to be dependent on the cloud point of the polymer, which corresponds to the transition temperature at which the aggregation or precipitation of the polymer molecules becomes thermodynamically more favorable than their solubilization. In the present study, a system capable of delivering siRNAs efficiently, specifically and without presenting relevant cytotoxicity, even in the presence of serum, was developed. Confocal fluorescence experiments showed that the ability of the generated systems to silence the target gene is related to some extent to nucleic acid internalization, being also dependent on polymer/siRNA dissociation at 37 °C. Thus, a delicate balance between nucleic acid internalization and intracellular release must be met in order to reach an ideal knockdown efficiency. The special features and potential for manipulation of the N-isopropylacrylamide-based copolymers make them suitable materials for the design and synthesis of new and promising siRNA delivery systems.

Tailoring the amphiphilicity and self-assembly of thermosensitive polymers: end-capped PEG-PNIPAAM block copolymers.

In this work we report on the synthesis and self-assembly of a thermo-sensitive block copolymer system of n-octadecyl-poly(ethylene glycol)-block-poly(N-isopropylacrylamide), abbreviated as C18-PEGn-b-PNIPAAMm. We present a facile synthetic strategy for obtaining highly tunable thermo-responsive block copolymers starting from commercial PEG-based surfactants (Brij®) or a C18 precursor and conjugating with PNIPAAM via an Atom Transfer Radical Polymerization (ATRP) protocol. The self-assembly and detailed nanostructure were thoroughly investigated in aqueous solutions using both small-angle X-ray and neutron scattering (SAXS/SANS) combined with turbidity measurements. The results show that the system forms rather well defined classical micellar structures at room temperature that first undergo a collapse, followed by inter-micellar aggregation upon increasing the temperature. For the pure C18-PNIPAAM system, however, rather ill-defined micelles were formed, demonstrating the important role of PEG in regulating the nanostructure and the stability. It is found that the PEG content can be used as a convenient parameter to regulate the thermoresponse, i.e., the onset of collapse and aggregation. A detailed theoretical modeling analysis of the SAXS/SANS data shows that the system forms typical core-shell micellar structures. Interestingly, no evidence of back folding, where PEG allows PNIPAAM to form part of the C18 core, can be found upon crossing the lower critical solution temperature (LCST). This might be attributed to the entropic penalty of folding a polymer chain and/or enthalpic incompatibility between the blocks. The results show that by appropriately varying the balance between the hydrophobic and hydrophilic content, i.e. the amphiphilicity, tunable thermoresponsive micellar structures can be effectively designed. By means of SAXS/SANS we are able to follow the response on the nanoscale. These results thus give considerable insight into thermo-responsive micellar systems and provide guidelines as to how these systems can be tailor-made and designed. This is expected to be of considerable interest for potential applications such as in nanomedicine where an accurate and tunable thermoresponse is required.

Synthesis and Characterization of a Thermoresponsive Copolymer with an LCST-UCST-like Behavior and Exhibiting Crystallization.

In this work, the diblock copolymer methoxy-poly(ethylene glycol)-block-poly(ε-caprolactone) (MPEG-b-PCL) was synthesized with a block composition that allows this polymer in aqueous media to possess both an upper critical solution temperature (UCST) and a lower critical solution temperature (LCST) over a limited temperature interval. The value of the UCST, associated with crystallization of the PCL-block, depended on heating (H) or cooling (C) of the sample and was found to be CPUCSTH = 32 °C and CPUCSTC = 23 °C, respectively. The LCST was not affected by the heating or cooling scans; assumed a value of 52 °C (CPLCSTH = CPLCSTC). At intermediate temperatures (e.g., 45 °C), dynamic light scattering (DLS), small-angle X-ray scattering (SAXS), and cryogenic transmission electron microscopy (cryo-TEM) showed that the solution consisted of a large population of spherical core-shell particles and some self-assembled rodlike objects. At low temperatures (below 32 °C), differential scanning calorimetry (DSC) and wide-angle X-ray scattering (WAXS) in combination with SAXS disclosed the formation of crystals with a cylindrical core-shell structure. Cryo-TEM supported a thread-like appearance of the self-assembled polymer chains. At temperatures above 52 °C, incipient phase separation took place and large aggregation complexes of amorphous morphology were formed. This work provides insight into the intricate interplay between UCST and LCST and the type of structures formed at these conditions in aqueous solutions of MPEG-b-PCL diblock copolymers.

Structure and interactions of charged triblock copolymers studied by small-angle X-ray scattering: dependence on temperature and charge screening.

A series of thermo-responsive cationic triblock copolymers composed of methoxy-poly(ethylene glycol) (MPEG, hydrophilic), poly(N-isopropylacrylamide) (PNIPAAM, temperature sensitive), and poly((3-acrylamidopropyl) trimethyl ammonium chloride) (PN(+), cationic) has been investigated as a function of temperature and ionic strength. In the MPEG-b-PNIPAAM-b-PN(+) copolymers, the MPEG block length is constant, and the lengths of the PNIPAAM and PN(+) blocks are varied. The solubility of the PNIPAAM block decreases with increasing temperature, and the triblock copolymer thus provides the possibilities of studying micelles with both neutral and charged blocks in the micelle corona as well as the interplay between these two blocks as the electrostatic interactions are varied by addition of salt. Investigation of the systems by densitometry and small-angle X-ray scattering (SAXS) in a temperature range from 20 to 70 °C gave detailed information on the behavior both below and above the critical micelle temperature (CMT). A clear effect of the addition of salt is observed in both the apparent partial specific volume, obtained from the densitometry measurements, and the SAXS data. Below the CMT, the single polymers can be described as Gaussian chains, for which the repulsive interchain interactions, originating from the charged PN(+) block, have to be taken into account in salt-free aqueous solution. Increasing the salt concentration of the solution to 30 mM NaCl leads to an increase in the apparent partial specific volume, and the electrostatic repulsive interchain interactions between the single polymers vanish. Raising the temperature results in micelle formation, except for the copolymer with only 20 NIPAAM units. The SAXS data show that the polymer with the medium PNIPAAM block length forms spherical micelles, whereas the polymer with the longest PNIPAAM block forms cylindrical micelles. Increasing the temperature further above the CMT results in an increase in the micellar aggregation number for both of the polymers forming spherical and cylindrical micelles. The addition of salt to the solution also influences the aggregates formed above the CMT. Overall, the micelles formed in the salt solution have a smaller cross-section radius than those in aqueous solution without added salt.

Cationic poly(N-isopropylacrylamide) block copolymer adsorption investigated by dual polarization interferometry and lattice mean-field theory.

A series of cationic diblock copolymers, poly(N-isopropylacrylamide)(48)-block-poly((3-acrylamidopropyl)trimethylammonium chloride)(X), abbreviated as PNIPAAM(48)-b-PAMPTMA(+)(X) (X = 0, 6, 10, 14, and 20), has been synthesized, and their adsorption onto silicon oxynitride from aqueous solution has been investigated using dual polarization interferometry. The polymer adsorption was modeled by using a lattice mean-field theory, and a satisfactory consistency between theory and experiments was found in terms of surface excess and layer thickness. Both theory and experiments show that the adsorption is limited by steric repulsion for X < X(max) and by electrostatic interactions for X > X(max). Modeling demonstrates that significant surface charge regulation occurs due to adsorption. Both the nonionic and cationic block exhibit nonelectrostatic affinity to silicon oxynitride and thus contribute to the driving force for adsorption, and modeling is used for clarifying how changes in the nonelectrostatic affinity affects the surface excess. The segments of the nonionic and cationic blocks seem less segregated when both have a nonelectrostatic affinity for the surface compared to the case where the segments had no surface affinity. Adsorption kinetics was investigated experimentally. Two kinetic regimes were observed: the adsorption rate is initially controlled by the mass transfer rate to the surface and at higher coverage is limited by the attachment rate.

Synthesis and antimicrobial activities of chitosan/polypropylene carbonate-based nanoparticles.

Antibiotic resistance is an emerging threat to public health. The development of a new generation of antimicrobial compounds is therefore currently required. Here we report a novel antimicrobial polymer of chitosan/polypropylene carbonate nanoparticles (CS/PPC NPs). These were designed and synthesized from readily available chitosan and a reactive oligomer polypropylene carbonate (PPC)-derived epoxy intermediate. By employing a simple and efficient functionalized strategy, a series of micelle-like chitosan-graft-polypropylene carbonate (CS-g-PPC) polymers and chitosan-polypropylene carbonate (CS-PPC) microgels were prepared by reacting mono-/bis-epoxy capped PPC with chitosan. The chemical structure, particle size, and surface charge of the newly synthesized polymers were characterized by infrared (IR) spectroscopy, nuclear magnetic resonance (NMR) spectroscopy, dynamic light scattering (DLS), and zeta potential measurements. The antimicrobial activities of these nanoparticles were determined in both Gram-positive bacteria (S. aureus) and Gram-negative bacteria (E. coli). Minimum inhibitory concentration (MIC), the nanoparticle concentration needed to completely inhibit the bacterial growth, was found at 128 µg mL-1 to 1024 µg mL-1, strongly depending both on the nature of the epoxy-imine network formed from the functional groups (mono- or bis-capped epoxy groups reacting with amine groups) and the feed ratio of the functional groups (-epoxy/-NH2) between the functionalized PPC and chitosan. No hemolysis was observed at concentrations well in excess of the effective bacteria-inhibiting concentrations. These findings provide a novel strategy to fabricate a new type of nanoantibiotic for antimicrobial applications.

Adsorption of cationic hydroxyethylcellulose derivatives onto planar and curved gold surfaces.

The adsorption of two positively charged hydroxyethylcellulose derivatives with 7 and 60 mol % positively charged groups and a cationic, hydrophobically modified hydroxyethylcellulose containing 1 mol % hydrophobic groups and 7 mol % charged groups onto flat and spherical citrate-coated gold surfaces of different sizes has been investigated. The planar surfaces were studied by means of the quartz crystal microbalance with dissipation monitoring, whereas nanoparticle suspensions were examined using dynamic light scattering and UV-vis spectroscopy. Two different driving forces for adsorption have been evaluated: the electrostatic interaction between the positive charges on the polymers and the negatively charged gold surfaces and the affinity of the polymers for gold due to hydrophobic interactions. The comparison between the data obtained from curved and planar surfaces suggests a strong correlation between surface curvature and adlayer conformation in the formation of the hybrid polymer-gold nanoparticles. The influence of particle size on the amount of adsorbed polymer has been evaluated for the different polymers. The impact of the ionic strength on polymer adsorption has been explored, and the adsorbed polymer layer has been found to protect the gold nanoparticles from aggregation when salt is added to the solution. The addition of salt to a mixture of gold particles and a charged polymer can induce a thicker adsorbed layer at low salinity, and desorption was found at high levels of salt addition.

Functionalized starch as a novel eco-friendly vulcanization accelerator enhancing mechanical properties of natural rubber.

A novel eco-friendly vulcanization accelerator, starch supported sodium isobutyl xanthate (SSX) has been synthesized firstly. The modification of starch using sodium isobutyl xanthate (SIBX) has improved the thermal stability significantly, and the vulcanization process of natural rubber (NR) could be accelerated by SSX at 145 ℃ accordingly. More importantly, SSX can be dispersed into NR matrix uniformly along with the strong interfacial interaction between SSX and NR, as evidenced by the constrained rubber chains around SSX surface. In addition, mechanical properties of the obtained NR have been enhanced remarkably, showing a 22.4 % increase in tensile strength when compared with traditional vulcanization accelerator. Laying on the fact that a novel vulcanization accelerator has been fabricated successfully using SIBX functionalized starch, new strategies for the preparation of green vulcanization accelerators and the functional application of biopolymers can be provided.

Effects of temperature and pH on the contraction and aggregation of microgels in aqueous suspensions.

Chemically cross-linked poly(N-isopropylacrylamide) (PNIPAM) microgels and PNIPAM with different amounts of acrylic acid groups (PNIPAM-co-PAA) were synthesized and the temperature-induced aggregation behaviors of aqueous suspensions of these microgels were investigated mainly with the aid of dynamic light scattering (DLS) and turbidimetry. The DLS results show that the particles at all conditions shrink at temperatures up to approximately the lower critical solution temperature (LCST), but the relative contraction effect is larger for the microgels without acid groups or for microgels with added anionic surfactant (SDS). A significant depression of the cloud point is found in suspensions of PNIPAM with very low concentrations of SDS. The compression of the microgels cannot be traced from the turbidity results, but rather the values of the turbidity increase in this temperature interval. This phenomenon is discussed in the framework of a theoretical model. At temperatures above LCST, the size of the microgels without attached charged groups in a very dilute suspension is unaffected by temperature, while the charged particles (pH 7 and 11) continue to collapse with increasing temperature over the entire domain. In this temperature range, low-charged particles of higher concentration and particles containing acrylic acid groups at low pH (pH 2) aggregate, and macroscopic phase separation is approached at higher temperatures. This study demonstrates how the stabilization of microgels can be affected by factors such as polymer concentration, addition of ionic surfactant to particles without charged acid groups, amount of charged groups in the polymer, and pH.

Temperature-induced formation and contraction of micelle-like aggregates in aqueous solutions of thermoresponsive short-chain copolymers.

A combination of turbidity, light scattering, and steady shear viscosity experiments has revealed that aqueous solutions of an amphiphilic diblock copolymer or a negatively charged triblock copolymer, both containing poly(N-isopropylacrylamide), can undergo a temperature-induced transition from loose intermicellar clusters to collapsed core-shell nanostructures. Turbidity, light scattering, and viscosity results of these short-chain copolymers disclose transition peaks at intermediate temperatures. At high temperatures, the compact core-shell particles from the diblock copolymer aggregate, whereas no renewed interpolymer association is observed for the triblock copolymer or for the solution of the diblock copolymer with added sodium dodecyl sulfate because the electrostatic repulsive interactions suppress the tendency of forming interpolymer clusters. The temperature-induced building up of intermicellar structures and the formation of large aggregates at high temperature in the solution of the diblock copolymer is significantly reduced under the influence of high shear rates.

Intramolecular and intermolecular association during chemical cross-linking of dilute solutions of different polysaccharides under the influence of shear flow.

Effects of shear flow on intramolecular and intermolecular associations of dilute aqueous alkali solutions of dextran, hydroxyethylcellulose (HEC), and a hydrophobically modified analogue (HM-HEC) in the presence of a chemical cross-linker agent were characterized with the aid of viscometry and rheo-small-angle light scattering (rheo-SALS) methods. The picture that emerges at short times in the course of cross-linking of the polymer solutions under the influence of a constant shear rate is that HEC coils contract because of intramolecular cross-linking, whereas the HM-HEC species show an incipient association and the dextran molecules are unaffected. At longer times, interchain cross-linking of the polymers promoted the growth of large flocs, which were disrupted by shear forces when they were sufficiently large. These findings are novel, and both the building up of aggregates and disaggregation are well substantiated by the SALS results.

Anomalous transition in aqueous solutions of a thermoresponsive amphiphilic diblock copolymer.

The influence of shear flow on aggregation and disaggregation in aqueous solutions of the thermoresponsive methoxy-poly(ethylene glycol)-block-poly(N-isopropylacrylamide) (MPEG53-b-PNIPAAM113) copolymer that exhibits a lower critical solution temperature was investigated with the aid of turbidity, shear viscosity, and rheo small angle light scattering (rheo-SALS) methods. The turbidity results at quiescent conditions revealed a novel transition peak in the turbidity curve at intermediate temperatures, which reflects the delicate interplay between temperature-induced aggregation and shrinking of the species. A similar anomalous transition peak (located at the same temperature) was observed in the steady shear viscosity measurements at intermediate temperatures, and the amplitude of the peak was reduced with increasing shear rate as a consequence of breakup of interaggregate chains. At low temperatures (low sticking probability), enhanced shear rate generated interpolymer aggregates; whereas in the high-temperature domain (high sticking probability) association structures were broken up as the shear rate was increased. The rheo-SALS experiments disclosed growth of aggregates at low temperatures and destruction of association complexes at high temperatures. An increase of the cloud point temperature with rising shear rate is reported, which is interpreted as being a disruption of clusters under the influence of shear stresses.

Thermo-responsive diblock and triblock cationic copolymers at the silica/aqueous interface: A QCM-D and AFM study.

The properties of synthesized diblock poly(N-isopropylacrylamide)-poly((3-acrylamidopropyl)trimethylammonium chloride) and triblock methoxy-poly(ethylene glycol)-poly(N-isopropylacrylamide)-poly((3-acrylamidopropyl)trimethylammonium chloride) cationic copolymers at the silica/aqueous interface are investigated using quartz crystal microbalance with dissipation monitoring (QCM-D) and atomic force microscopy (AFM). Moreover, dynamic light scattering is employed to assess the copolymers in terms of the hydrodynamic size and interchain aggregation. Although viscoelastic Voigt modeling of the QCM-D data suggests a comparable layer thickness for the copolymers on the silica surface, the AFM imaging and colloidal probe measurements reveal significant differences in surface coverage and thickness of the layers, which are discussed and compared with respect to the stabilization effect by the hydrophilic poly(ethylene glycol) block.

On the formation of inclusion complexes at the solid/liquid interface of anchored temperature-responsive PNIPAAM diblock copolymers with γ-cyclodextrin.

The thermal responsive behavior of adsorbed layers of diblock copolymers of poly(N-isopropylacrylamide) (PNIPAAM) and poly((3-acrylamidopropyl)trimethylammonium chloride) (PAMPTMA(+)) with γ-cyclodextrin (γ-CD) at the solid/liquid interface has been investigated using three in situ techniques: null ellipsometry, quartz-crystal microbalance with dissipation monitoring, and neutron reflectometry. The measurements provided information about the adsorbed amounts, the layer thickness, hydration and viscoelastic properties, and the interfacial structure and composition. The copolymers adsorb to silica with the cationic PAMPTMA(+) blocks sitting as anchors in a flat conformation and the PNIPAAM chains extending into the solution. The copolymer system alone exhibits reversible collapse above the lower critical solution temperature of PNIPAAM. The addition of γ-CD to pre-adsorbed copolymer layers results in a highly extended conformation as well as some loss of copolymer from the surface, which we discuss in terms of the formation of surface-invoked lateral steric repulsion of formed inclusion complexes.

Liposomes coated with hydrophobically modified hydroxyethyl cellulose: Influence of hydrophobic chain length and degree of modification.

Nanoparticulate systems with an uncharged hydrophilic surface may have a great potential in mucosal drug delivery. In the present study liposomes were coated with hydrophobically modified hydroxyethyl cellulose (HM-HEC) to create a sterically stabilized liposomal system with an uncharged surface. The aim was to clarify the influence of the amount of hydrophobic modification of HEC and the length of the hydrophobic moiety, on the stability of the system and on the release properties. HM-HEC with different degrees of hydrophobic modification (1 and 2mol%) and hydrophobic groups with different chain lengths (C8, C12, C16) were included in the study, as well as fluid phase and gel phase liposomes. Both types of liposomes were successfully coated with HM-HEC containing 1mol% of hydrophobic groups, while 2mol% did not work for the intended pharmaceutical applications. The polymer coated gel phase liposomes were stable (size, zeta potential, leakage) for 24 weeks at 4°C, with no differences between the C8 and C16 HM-HEC coating. For the fluid phase liposomes a size increase was observed after 24 weeks at 4°C for all formulations; the C8 HM-HEC coated liposomes increased the most. No differences in the leakage during storage at 4°C or in the release at 35°C were observed between the fluid phase formulations. To conclude; HM-HEC with a shorter hydrophobic chain length resulted in a less stable product for the fluid phase liposomes, while no influence of the chain length was observed for the gel phase liposomes (1mol% HM).