ABSTRACT
Chronic wounds remain a therapeutic and financial challenge for physicians and the health care systems. Innovative, inexpensive and effective treatment methods would be of immense value. The sublesional fat grafting could be such treatment, although effectiveness and safety have only been assessed in a few randomised clinical trials. The fat graft was obtained by liposuction, washed with the Coleman method and then injected sublesional and into the wound margins after surgical debridement. For the control group, saline solution was used instead of fat. The primary endpoint was to determine the wound size reduction in both groups. The wounds were measured preoperatively, intraoperatively and 3, 7, 21 and 60 days after the intervention. A p-value of <0.05 was considered significant. Furthermore, histology and microbiology of the wounds and pain were assessed. A temporary effect of the treatment was observed after 14 and 21 days. The wound size reduction was significantly larger in the intervention group, whereas after 60 days, no significant difference was detected between both groups. No adverse events could be reported and the pain level was almost equal in the control and intervention group. Sublesional fat grafting temporarily enhanced healing of chronic wounds. The procedure was safe and the pain level was low. Repeated interventions could lead to complete wound closure, which should be determined in future studies.
Subject(s)
Leg Ulcer , Varicose Ulcer , Humans , Wound Healing , Prospective Studies , Varicose Ulcer/therapy , Leg Ulcer/surgery , Adipose Tissue , PainABSTRACT
Chronic wounds represent a major socio-economic problem in developed countries today. Wound healing is a complex biological process. It requires a well-orchestrated interaction of mediators, resident cells and infiltrating cells. In this context, mesenchymal stem cells and keratinocytes play a crucial role in tissue regeneration. In chronic wounds these processes are disturbed and cell viability is reduced. Hydroxyectoine (HyEc) is a membrane protecting osmolyte with protein and macromolecule stabilising properties. Adipose-derived stem cells (ASC) and keratinocytes were cultured with chronic wound fluid (CWF) and treated with HyEc. Proliferation was investigated using MTT test and migration was examined with transwell-migration assay and scratch assay. Gene expression changes of basic fibroblast growth factor (b-FGF), vascular endothelial growth factor (VEGF), matrix metalloproteinases-2 (MMP-2) and MMP-9 were analysed by quantitative real-time polymerase chain reaction (qRT-PCR). CWF significantly inhibited proliferation and migration of keratinocytes. Addition of HyEc did not affect these results. Proliferation capacity of ASC was not influenced by CWF whereas migration was significantly enhanced. HyEc significantly reduced ASC migration. Expression of b-FGF, VEGF, MMP-2 and MMP-9 in ASC, and b-FGF, VEGF and MMP-9 in keratinocytes was strongly induced by chronic wound fluid. HyEc enhanced CWF induced gene expression of VEGF in ASC and MMP-9 in keratinocytes. CWF negatively impaired keratinocyte function, which was not influenced by HyEc. ASC migration was stimulated by CWF, whereas HyEc significantly inhibited migration of ASC. CWF induced gene expression of VEGF in ASC and MMP-9 in keratinocytes was enhanced by HyEc, which might partly be explained by an RNA stabilising effect of HyEc.
Subject(s)
Adipose Tissue/cytology , Amino Acids, Diamino/therapeutic use , Keratinocytes/drug effects , Keratinocytes/physiology , Mesenchymal Stem Cells/drug effects , Mesenchymal Stem Cells/physiology , Wound Healing/drug effects , Cell Proliferation/physiology , Cells, Cultured/drug effects , Chronic Disease/therapy , Guided Tissue Regeneration/methods , HumansABSTRACT
PURPOSE: Advances in computers and imaging have permitted the adoption of 3-dimensional (3D) virtual planning protocols in orthognathic surgery, which may allow a paradigm shift when the virtual planning can be transferred properly. The purpose of this investigation was to compare the versatility and precision of innovative computer-aided designed and computer-aided manufactured (CAD/CAM) surgical splints, intraoperative navigation, and "classic" intermaxillary occlusal splints for surgical transfer of virtual orthognathic planning. MATERIAL AND METHODS: The protocols consisted of maxillofacial imaging, diagnosis, virtual orthognathic planning, and surgical planning transfer using newly designed CAD/CAM splints (approach A), navigation (approach B), and intermaxillary occlusal splints (approach C). In this prospective observational study, all patients underwent bimaxillary osteotomy. Eight patients were treated using approach A, 10 using approach B, and 12 using approach C. These techniques were evaluated by applying 13 hard and 7 soft tissue parameters to compare the virtual orthognathic planning (T0) with the postoperative result (T1) using 3D cephalometry and image fusion (ΔT1 vs T0). RESULTS: The highest precision (ΔT1 vs T0) for the maxillary planning transfer was observed with CAD/CAM splints (<0.23 mm; P > .05) followed by surgical "waferless" navigation (<0.61 mm, P < .05) and classic intermaxillary occlusal splints (<1.1 mm; P < .05). Only the innovative CAD/CAM splints kept the condyles in their central position in the temporomandibular joint. However, no technique enables a precise prediction of the mandible and soft tissue. CONCLUSIONS: CAD/CAM splints and surgical navigation provide a reliable, innovative, and precise approach for the transfer of virtual orthognathic planning. These computer-assisted techniques may offer an alternate approach to the use of classic intermaxillary occlusal splints.
Subject(s)
Computer-Aided Design , Models, Anatomic , Occlusal Splints , Orthognathic Surgical Procedures/methods , Surgery, Computer-Assisted , User-Computer Interface , Cephalometry/methods , Facial Asymmetry/surgery , Female , Humans , Image Processing, Computer-Assisted/methods , Imaging, Three-Dimensional , Male , Malocclusion/surgery , Patient Care Planning , Prospective Studies , Sleep Apnea, Obstructive/surgeryABSTRACT
OBJECTIVES: To evaluate the potential influence of different cone-beam computed tomography (CBCT) devices on the transfer accuracy of an open-source system for computer-aided implantology (CAI). MATERIAL AND METHODS: A total of 108 implants in 18 partially edentulous patient-equivalent models were planned and fully guided implants were inserted using an open-source CAI system with three different CBCT devices. After follow-up CBCT and fiducial marker-matching procedure, linear horizontal, vertical, and maximal three-dimensional deviations, as well as angle deviations between the virtual planning data and the surgical results were calculated. Variance analysis was carried out to prove whether or not the observed differences between the CBCT devices were statistically significant. RESULTS: The observed mean three-dimensional deviation rates between virtually planned and achieved implant positions varied by around 400 µm (45%) at the implant's base and around 540 µm (50%) at the implant's tip in dependence to the applied CBCT device. Mean vertical deviations varied around 370 µm (76%) at the implant's base and 350 µm (69%) at the implant's tip, whereas axes deviations varied around 0.81° (40%) between the three investigated CBCT devices. Except for the axes deviations and the horizontal linear deviations at the implants base, observed differences reached significance level between the CBCT devices. CONCLUSIONS: Until now, the potential influence from different CBCT devices on the transfer accuracy of CAI systems has not yet been investigated. Data from the present study confirm for the first time the in vitro CBCT device dependency on the transfer accuracy of CAI systems reaching up to axes deviations of 0.6 angle degree and linear deviations around half a millimeter.
Subject(s)
Cone-Beam Computed Tomography , Dental Implantation, Endosseous/methods , Jaw, Edentulous, Partially/diagnostic imaging , Jaw, Edentulous, Partially/surgery , Patient Care Planning , Surgery, Computer-Assisted/instrumentation , Analysis of Variance , Computer-Aided Design , Humans , In Vitro Techniques , Models, Dental , SoftwareABSTRACT
Deep inferior epigastric artery flaps (DIEP) represent the gold standard of autologous breast reconstruction. Due to significant variations in vascular anatomy, preoperative perforator mapping (PM) is mandatory in order to ensure the presence of a sufficient perforator within the flap. In this regard, CT angiography (CTA) is currently the method of choice. Therefore, we investigated the value of contrast-enhanced ultrasound (CEUS) techniques for preoperative PM in comparison to CTA. Patients underwent PM, utilizing both CTA and CEUS techniques. Documentation included the course of the vascular pedicle through the rectus muscle (M), fascial penetration (F), the subcutaneous plexus (P) and the skin point (SP) on either side of the abdomen. Thus, contrast-enhanced B-Flow (BCEUS), B-Flow ultrasound (BUS), CEUS, color Doppler ultrasound (CDUS) and CTA were evaluated in terms of the diagnostic consistency and effectiveness of PM. Precision (∆L) was then calculated in relation to the actual intraoperative location. Statistical analysis included Kruskall-Wallis, Levene and Bonferroni tests, as well as Spearman correlations. A total of 39 DIEP flaps were analyzed. Only CTA (∆L = 2.85 mm) and BCEUS (∆L = 4.57 mm) enabled complete PM, also including P and SP, whereas CDUS, CEUS and BUS enabled clear PM throughout M and F only. Regarding the number of detected perforators, PM techniques are ranked from high to low as follows: CTA, BCEUS, BUS, CEUS and CDUS. CTA and BCEUS showed sufficient diagnostic consistency for SP, P and F, while CDUS and CTA had a superior performance for M. BCEUS offers precise image-controlled surface tags and dynamic information for PM without imposing radiation and may, therefore, be considered a feasible add-on or alternative to CTA. However, BCEUS requires an experienced examiner and is more time-consuming.
ABSTRACT
BACKGROUND: An augmented reality tool for computer assisted surgery named X-Scope allows visual tracking of real anatomical structures in superposition with volume rendered CT or MRI scans and thus can be used for navigated translocation of bony segments. METHODS: In a feasibility study X-Scope was used in orthognathic surgery to control the translocation of the maxilla after Le Fort I osteotomy within a bimaxillary procedure. The situation achieved was compared with the pre-operative situation by means of cephalometric analysis on lateral and frontal cephalograms. RESULTS: The technique was successfully utilized in 5 patients. Maxillary positioning using X-Scope was accomplished accurately within a range of 1mm. The tool was used in all cases in addition to the usual intra-operative splints. A stand-alone application without conventional control does not yet seem reasonable. CONCLUSION: Augmented reality tools like X-Scope may be helpful for controlling maxillary translocation in orthognathic surgery. The application to other interventions in cranio-maxillofacial surgery such as Le Fort III osteotomy, fronto-orbital advancement, and cranial vault reshaping or repair may also be considered.
Subject(s)
Malocclusion, Angle Class III/surgery , Maxilla/surgery , Osteotomy, Le Fort/methods , Surgery, Computer-Assisted/methods , User-Computer Interface , Adolescent , Adult , Cephalometry , Computer Simulation , Feasibility Studies , Female , Humans , Mandible/surgery , Models, Anatomic , Retrognathia/surgery , Software , Tomography, X-Ray ComputedABSTRACT
OBJECTIVE: To assess the predictors of implant failure after grafted maxillary sinus (GMS). MATERIAL AND METHODS: A total of 1045 implants were inserted in 224 patients/347 GMS during a period of 14 years. Kaplan-Meyer and multivariate log-regression analysis were used to assess the following variates: patient's age, gender, smoker/nonsmoker, American Society of Anesthesiologists (ASA) class, one/two-stage surgery, merged/submerged healing, membrane, antibiotics, auto/allo/xenogenic bone grafts, implant's lengths/surface/diameter, crestal bone atrophy/quality, implant region, prosthetics, opposing dentition, and implant proximity to evaluate the predictors and relative risk (hazard ratio [HR]) of implant failure. RESULTS: Significant implant failure predictors were the graft material (HR = 4.7), with superior results for autogenic bone, residual crestal bone height (HR = 3.51), ASA class (HR = 2.73), surgical technique (HR = 2.56), implant proximity (HR = 2.07), smoker (HR = 1.98), and age (>60/HR=1.39). All other factors were insignificant. Overall survival rate was 93.3%. CONCLUSIONS: GMS is effective when the predictors are considered. Patient selection, including the ASA status, smoking, residual bone height, and the graft material are the predominant predictors. In highly atrophic situations, autogenic bone grafts showed superiority; however, in less atrophic cases, nonautogenic bone-grafts are equivalent.
Subject(s)
Dental Implants/statistics & numerical data , Dental Restoration Failure/statistics & numerical data , Plastic Surgery Procedures/methods , Sinus Floor Augmentation/methods , Adult , Age Factors , Aged , Aged, 80 and over , Antibiotic Prophylaxis/statistics & numerical data , Atrophy , Bone Density/physiology , Bone Substitutes/therapeutic use , Bone Transplantation/methods , Dental Implantation, Endosseous/adverse effects , Dental Implantation, Endosseous/methods , Dental Implantation, Endosseous/statistics & numerical data , Dental Prosthesis Design , Female , Follow-Up Studies , Forecasting , Health Status , Humans , Male , Maxilla/pathology , Membranes, Artificial , Middle Aged , Plastic Surgery Procedures/adverse effects , Plastic Surgery Procedures/statistics & numerical data , Retrospective Studies , Risk Factors , Sex Factors , Sinus Floor Augmentation/adverse effects , Sinus Floor Augmentation/statistics & numerical data , Smoking , Survival AnalysisABSTRACT
BACKGROUND: The aim of this study was to compare the clinical outcomes of two techniques to repair complete bilateral cleft lip by using indirect two-dimensional photographic analysis. METHODS: One hundred eight bilateral cleft patients were included in this study, 54 patients operated on with the Millard technique and 54 patients operated on with the Afroze technique. Each group of patients was further separated into two subgroups containing symmetrical and asymmetrical cleft lips. All patients were photographed preoperatively and 4 years postoperatively in frontal and submentovertical views in a reproducible way. Eight measurements were performed on the photographs. From these measurements, seven ratios were calculated to compare the two techniques. RESULTS: The outcomes of the interobserver and intraobserver measurements were analyzed using the Pearson correlation test. There was a statistically significant reliability in the intraobserver and interobserver ratios. Analysis of the ratios was performed using the independent samples t test (5 percent level of significance). The authors found that the Afroze technique was better than the Millard technique in six of the seven parameters for symmetrical clefts and in four of the seven parameters for asymmetrical clefts; however, there was no statistically significant difference seen between the two techniques. CONCLUSIONS: The Afroze technique seems to have good clinical outcomes on bilateral cleft lip patients, but more research and long-term follow-up are needed to determine the full outcome of the technique in various parameters.
Subject(s)
Cleft Lip/surgery , Image Processing, Computer-Assisted , Photography , Plastic Surgery Procedures/methods , Follow-Up Studies , Humans , Infant , Observer Variation , Reproducibility of Results , Retrospective Studies , Treatment OutcomeABSTRACT
BACKGROUND AND OBJECTIVES: Inhalation injury, especially in combination with cutaneous burns, is the major cause of morbidity and mortality in patients admitted to burn care centers. Either with or without the presence of a cutaneous burn, inhalation injury contributes to high risk for developing severe pulmonary complications. Steroids may reduce a prolonged and destructive inflammatory response to toxic or allergic substances. The objective of this study was to evaluate the effect of early single-shot intravenous steroids on pulmonary complications and mortality in burned or scalded patients with or without inhalation injury. METHODS: Retrospective analysis of a prospective single center database of patients registered between 1989 and 2011 who were admitted to the intensive care unit of our burn care center after burn or scald injury. Uni-variate statistical analysis was performed comparing two groups (steroid treated vs. non steroid treated patients) with regard to clinical outcome. Main parameters were sepsis, mortality and pulmonary complications such as pneumonia, ALI and ARDS. Multi-variate analysis was used by logistic regression with mortality and pulmonary complications as the dependent variables to identify independent risk factors after burn or scald injuries. RESULTS: A total of 1637 patients with complete data were included in the present analysis. 199 (12.2%) received single-shot intravenous steroids during the prehospital phase of care. In 133 (66.8%) of these patients, inhalation injury was diagnosed via bronchoscopy. Steroid treated patients had sustained a significantly higher severity of burn than non-steroid treated patients (Abbreviated Burn Severity Index 7.1±3 vs. 6.0±2.9; p<0.001). In a multivariate analysis using a logistic regression model early intravenous steroid treatment had no significant effect on pulmonary complications and mortality. CONCLUSIONS: In our single center cohort of burned and scalded patients single-shot intravenous steroids during the pre-hospital phase of care was not associated with pulmonary complications or mortality.
Subject(s)
Burns, Inhalation/drug therapy , Burns/complications , Lung Diseases/drug therapy , Skin/injuries , Steroids/administration & dosage , Administration, Intravenous , Adult , Aged , Burns, Inhalation/complications , Burns, Inhalation/mortality , Drug Administration Schedule , Female , Humans , Incidence , Logistic Models , Lung Diseases/etiology , Male , Middle Aged , Multiple Organ Failure/epidemiology , Multiple Organ Failure/etiology , Multivariate Analysis , Respiratory Distress Syndrome/etiology , Retrospective Studies , Risk Factors , Sepsis/epidemiology , Sepsis/etiologyABSTRACT
There may well be a shift towards 3-dimensional orthognathic surgery when virtual surgical planning can be applied clinically. We present a computer-assisted protocol that uses surgical navigation supplemented by an interactive image-guided visualisation display (IGVD) to transfer virtual maxillary planning precisely. The aim of this study was to analyse its accuracy and versatility in vivo. The protocol consists of maxillofacial imaging, diagnosis, planning of virtual treatment, and intraoperative surgical transfer using an IGV display. The advantage of the interactive IGV display is that the virtually planned maxilla and its real position can be completely superimposed during operation through a video graphics array (VGA) camera, thereby augmenting the surgeon's 3-dimensional perception. Sixteen adult class III patients were treated with by bimaxillary osteotomy. Seven hard tissue variables were chosen to compare (ΔT1-T0) the virtual maxillary planning (T0) with the postoperative result (T1) using 3-dimensional cephalometry. Clinically acceptable precision for the surgical planning transfer of the maxilla (<0.35 mm) was seen in the anteroposterior and mediolateral angles, and in relation to the skull base (<0.35°), and marginal precision was seen in the orthogonal dimension (<0.64 mm). An interactive IGV display complemented surgical navigation, augmented virtual and real-time reality, and provided a precise technique of waferless stereotactic maxillary positioning, which may offer an alternative approach to the use of arbitrary splints and 2-dimensional orthognathic planning.
Subject(s)
Data Display , Maxilla/surgery , Orthognathic Surgical Procedures/methods , Surgery, Computer-Assisted/methods , Adult , Anatomic Landmarks/pathology , Cephalometry/methods , Computer Graphics , Facial Asymmetry/surgery , Female , Frontal Bone/pathology , Humans , Imaging, Three-Dimensional/methods , Jaw Relation Record/methods , Male , Malocclusion, Angle Class III/surgery , Maxilla/pathology , Open Bite/surgery , Operative Time , Osteotomy/methods , Patient Care Planning , Stereotaxic Techniques , Treatment Outcome , User-Computer Interface , Video Recording , Visual Perception , Young Adult , Zygoma/pathologyABSTRACT
Auricular cartilage is an important source of grafts for various reconstructive procedures such as aesthetic rhinoplasty. The purpose of this investigation was to compare tragal cartilage with auricular cartilage harvested from the concha and scapha, and describe its clinical viability, indications, and morbidity in rhinoplasty. A total of 150 augmentation rhinoplasties with a total of 170 grafts were included. The donor sites were tragus (n=136), concha (n=26), and scapha (n=8). The time needed to harvest the grafts, the donor site morbidity, and the indications for operation were recorded. The anthropometric changes to 4 auricular variables after the cartilage had been harvested were analysed and compared with those on the opposite side in 48 patients using Student's paired t-test. Intraobserver reliability was assessed using Pearson's intraclass correlation. The mean (SD) harvesting time was 27 (8) min for the concha, 4.5 (1.4) min for the tragus, and 5.7 (1.6) min for the scapha. The largest graft was taken from the concha (28×19 mm), followed by the tragus (20×12 mm), and the scapha (18×6 mm). The grafts were placed at the following sites: tip grafts (n=123), columella struts (n=80), shield (n=20), rim (n=17), and dorsal onlay (n=15). Harvesting tragal cartilage is safe, simple, fast, and has a low morbidity, but it can affect the patient's ability to wear earphones. Tragal cartilage is a good alternative for nasal reconstruction if a graft of no longer than 20 mm is required.
Subject(s)
Autografts/transplantation , Ear Cartilage/transplantation , Rhinoplasty/methods , Adult , Cicatrix/etiology , Dissection/methods , Ear Cartilage/anatomy & histology , Esthetics , Female , Follow-Up Studies , Graft Survival , Humans , Male , Minimally Invasive Surgical Procedures/methods , Operative Time , Postoperative Complications , Retrospective Studies , Tissue and Organ Harvesting/methods , Transplant Donor Site/anatomy & histologyABSTRACT
OBJECTIVE: We present a virtual planning protocol incorporating a patented 3-surgical splint technique for orthognathic surgery. The purpose of this investigation was to demonstrate the feasibility and validity of the method in vivo. MATERIALS AND METHODS: The protocol consisted of (1) computed tomography (CT) or cone-beam computed tomography (CBCT) maxillofacial imaging, optical scan of articulated dental study models, segmentation, and fusion; (2) diagnosis and virtual treatment planning; (3) computed-assisted design and manufacture (CAD/CAM) of the surgical splints; and (4) intraoperative surgical transfer. Validation of the accuracy of the technique was investigated by applying the protocol to 8 adult class III patients treated with bimaxillary osteotomies. The virtual plan was compared with the postoperative surgical result using image fusion of CT/CBCT dataset by analysis of measurements between hard and soft tissue landmarks relative to reference planes. RESULTS: The virtual planning approach showed clinically acceptable precision for the position of the maxilla (<0.23 mm) and condyle (<0.19 mm), marginal precision for the mandible (<0.33 mm), and low precision for the soft tissue (<2.52 mm). CONCLUSIONS: Virtual diagnosis, planning, and use of a patented CAD/CAM surgical splint technique provides a reliable method that may offer an alternate approach to the use of arbitrary splints and 2-dimensional planning.
Subject(s)
Image Processing, Computer-Assisted , Malocclusion, Angle Class III/surgery , Models, Anatomic , Occlusal Splints , Orthognathic Surgical Procedures/methods , Surgery, Computer-Assisted/methods , Adult , Cephalometry , Computer-Aided Design , Cone-Beam Computed Tomography , Face/anatomy & histology , Feasibility Studies , Female , Humans , Imaging, Three-Dimensional/methods , Jaw/diagnostic imaging , Male , Models, Dental , Patient Care Planning , Prospective Studies , Statistics, Nonparametric , Tomography, X-Ray Computed , User-Computer Interface , Young AdultABSTRACT
PURPOSE: Implant placement in the edentulous anterior mandible is frequently performed to stabilize prosthetic superstructures. The position of the inferior alveolar nerve (IAN), especially in an atrophic mandible, has to be considered to position implants properly. In this study, the prevalence of looping of the IAN was retrospectively determined to assess the need for imaging prior to implant placement in the anterior mandible. MATERIALS AND METHODS: Cone beam computed tomography scans of consecutive patients were evaluated to assess the prevalence and size of IAN looping. The results were compared with respect to patient age and sex as well as degree of atrophy and bone height at the mental foramen. RESULTS: Scans of 1,010 patients were obtained. IAN loops were found in 31% of the patients, with a significantly higher prevalence in male patients (33.1%) than in female patients (28.1%). The average size of loops was 1.4 ± 0.70 mm, with a maximum of 4.6 mm. For male patients, the average loop size was 1.6 ± 0.74 mm (maximum 4.6 mm), and for female patients an average dimension of 1.4 ± 0.63 mm (maximum 4.4 mm) was recorded. This difference was significant (t test). A significant difference with respect to the various classes of atrophy up to class 4 was not found. CONCLUSION: Loops of the IAN occur in about one third of patients and vary in size from 0.7 to 4.6 mm. Large anterior loops put the IAN at risk when interforaminal implants are placed. Either a sufficient safety distance or three-dimensional imaging procedures should be used to detect loops and locate the incisive canal, which could be harmed during the interforaminal implant placement.
Subject(s)
Chin/innervation , Cone-Beam Computed Tomography , Mandibular Nerve/diagnostic imaging , Adolescent , Adult , Age Factors , Aged , Aged, 80 and over , Atrophy/diagnostic imaging , Child , Child, Preschool , Chin/diagnostic imaging , Chin/pathology , Dental Implantation, Endosseous/methods , Female , Humans , Imaging, Three-Dimensional , Male , Mandibular Nerve/anatomy & histology , Middle Aged , Retrospective Studies , Sex Factors , Young AdultABSTRACT
OBJECTIVE: The aim of this study was to assess the prevalence of pathologic findings in the maxillary sinus by using cone-beam computerized tomography (CBCT). STUDY DESIGN: One thousand twenty-nine consecutive CBCT scans were retrospectively inspected for pathologic findings in the maxillary sinus by 3 observers. Findings were differentiated by mucosal thickening, partial opacification with liquid accumulation, total opacification, and polypoidal mucosal thickening. Position and diameter of the maxillary sinus ostium were assessed. Correlations for pathologic findings and the factors of age and gender were calculated. Patients with clinical manifestations of sinusitis or total opacification in either sinus were reevaluated. RESULTS: A total prevalence for pathologies in the maxillary sinus of 56.3% was found in this study. The most frequent pathology was mucosal thickening. Patients >60 years of age showed significantly more pathologies in the maxillary sinus (P = .02), and male patients showed significantly more pathologies than female patients (P = .01). Clinical signs of sinusitis could be confirmed on CBCT images for all patients. CONCLUSIONS: Pathologies in the maxillary sinus are frequently found in CBCT imaging and have to be treated or followed-up accordingly. CBCT is applicable for diagnosis and treatment planning of clinically present sinusitis.
Subject(s)
Cone-Beam Computed Tomography , Maxillary Sinus/diagnostic imaging , Maxillary Sinus/pathology , Maxillary Sinusitis/diagnostic imaging , Maxillary Sinusitis/pathology , Adolescent , Adult , Age Factors , Aged , Aged, 80 and over , Child , Feasibility Studies , Female , Humans , Male , Middle Aged , Nasal Mucosa/pathology , Retrospective Studies , Sex Factors , Young AdultABSTRACT
BACKGROUND: The external ear provides a versatile cartilage source for reconstructive procedures, especially for augmentative rhinoplasty. The authors evaluated the short- and long-term morbidity associated with ear cartilage harvest using concha, tragus, and scapha as donor sites. METHODS: The study included 52 patients in whom a cartilage graft from the external ear was harvested between February of 2001 and June of 2005. Donor-site morbidity was assessed in the early postoperative follow-up period. Twenty-eight patients were examined within a follow-up time of 3 to 168 months. Long-term morbidity assessment included documentation of patients' subjective complaints, clinical examination of the donor site, and anthropometric measurements. RESULTS: The relevant morbidity factors in the early postoperative period were hematoma formation (6.7 percent) and sensory impairment (3.3 percent). In long-term follow-up, sensory impairment was the most frequent condition objectively assessed and subjectively complained of (12.9 percent). Overall, sensory impairment was confined to concha as the donor site. Anthropometric measurements showed a mean difference in the length of the affected ear compared with the contralateral ear of 1.8 mm, a width difference of 2.5 mm, a difference in tragus/lateral canthus distance of 1.4 mm, and a difference in protrusion angle of 2.4 degrees. Statistically significant differences between values obtained from operated and nonoperated ears could not be detected for every evaluated parameter using the paired t test. Aesthetically relevant complications were rare and their occurrence restricted to single cases. CONCLUSION: Cartilage graft harvest from the auricle can be considered as a relatively safe procedure with a favorable aesthetic outcome.