Bioelectrochemical synthesis of rhamnolipids and energy production and its correlation with nitrogen in air-cathode microbial fuel cells.

Microbial fuel cells (MFCs) have been recently proven to synthesise biosurfactants from waste products. In classic bioreactors, the efficiency of biosynthesis process can be controlled by the concentration of nitrogen content in the electrolyte. However, it was not known whether a similar control mechanism could be applied in current-generating conditions. In this work, the effect of nitrogen concentration on biosurfactant production from waste cooking oil was investigated. The concentration of NH4Cl in the electrolyte ranged from 0 to 1 g L-1. The maximum power density equal to 17.5 W m-3 was achieved at a concentration of 0.5 g L-1 (C/N = 2.32) and was accompanied by the highest surface tension decrease (to 54.6 mN m-1) and an emulsification activity index of 95.4%. Characterisation of the biosurfactants produced by the LC-MS/MS method showed the presence of eleven compounds belonging to the mono- and di-rhamnolipids group, most likely produced by P. aeruginosa, which was the most abundant (19.6%) in the community. Importantly, we have found a strong correlation (R = -0.96) of power and biosurfactant activity in response to C/N ratio. This study shows that nitrogen plays an important role in the current-generating metabolism of waste cooking oil. To the best of our knowledge, this is the first study where the nitrogen optimisation was investigated to improve the synthesis of biosurfactants and power generation in a bioelectrochemical system.

Prevention and removal of membrane and separator biofouling in bioelectrochemical systems: a comprehensive review.

Bioelectrochemical systems (BESs) have made significant progress in recent years in all aspects of their technology. BESs usually work with a membrane or a separator, which is one of their most critical components affecting performance. Quite often, biofilm from either the anolyte or catholyte forms on the membrane, which can negatively affect its performance. In critical cases, the long-term power performance observed for microbial fuel cells (MFCs) has dropped by over 90%. Surface modification and composite material approaches as well as chemical and physical cleaning techniques involving surfactants, acids, hydroxides, and ultrasounds have been successfully implemented to combat biofilm formation. Surface modifications produced up to 6-7 times higher power performance in the long-term, whereas regeneration strategies resulted in up to 100% recovery of original performance. Further studies include tools such as fluid dynamics-based design and plasma cleaning. The biofouling area is still underexplored in the field of bioelectrochemistry and requires systematic improvement. Therefore, this review summarizes the most recent knowledge with the aim of helping the research and engineering community select the best strategy and discuss further perspectives for combating the undesirable biofilm.