Highly sensitive and label free on-site monitoring immunosensor for detection of Aflatoxin B1 from real samples.

Aflatoxin B1 (AF-B1) are toxins secreted by secondary metabolites of molds that have adverse effects on humans and animals resulting in huge economic losses. Here we report on field useable, cost effective and direct electrochemical sensor based on conducting polymer composite electrode, Poly (3,4-ethylenedioxythiophene): polystyrene sulphonic acid (PEDOT-PSS) for label-free detection of AF-B1. Structural and morphological characterization of composite electrodes were carried out using XRD and SEM. We compared two different electroanalytical techniques namely, transient capacitance and differential pulse voltammetry, to select the most prominent technique for analyzing the mycotoxin easily. For direct detection of AF-B1, transient capacitance measurement at 77 and 1000 Hz was employed wherein sensor showed linearity in 18.18-300.0 ng mL-1 range at 77 Hz for AF-B1. Best limit of detection (LOD) for AF-B1 was 55.41 ng mL-1 (369 pM) at 77 Hz with very good repeatability. DPV showed linearity in the range 18.18-342.85 ng mL-1 with LOD 435 pM. For demonstration of application of this sensor directly using minimum sample preparation, AF-B1 sensing has been confirmed successfully using white button mushrooms and okra stored at ambient conditions. Sensor response with real samples suggest usefulness of sensor to monitor stored farm products easily.

Polymeric nanocomposite electrode for enhanced electrochemical detection of α-lipoic acid: Application in neuroinflammation prevention and clinical analysis.

Using poly (vanillin-co-chitosan)/functionalized MWCNTs/GCE (PV-CS/f-MWCNTs/GCE) as a polymeric nanocomposite modified electrode, the present investigation has been conducted on the electrochemical detection of α-lipoic acid (α-LA) to prevent the activation of microglia inflammation of the nervous system. The manufacture of modified polymeric nanocomposite electrodes was carried out using the established electropolymerization process. Field emission scanning electron microscopy (FE-SEM) and X-ray diffraction (XRD) analyses of structure revealed that the electropolymerization of poly (vanillin-co-chitosan) on the surface of the f-MWCNTs modified electrode was successful. Vanillin-co-chitosan electropolymerization on f-MWCNTs as electroactive sheets can enhance the signal for α-LA electrochemical sensors, according to research on the electrochemical characteristics utilizing cyclic voltammetry (CV) and differential pulse voltammetry (DPV) methodologies. The PV-CS/f-MWCNTs/GCE demonstrated that it had a sensitivity of 0.04664 µA/µM, a detection limit of 0.012 µM, and an excellent response, linear range, and wide linear range to α-LA from 0 to 3000 µM. The results of the application of PV-CS/f-MWCNTs/GCE for determining the concentration of α-LA in a prepared real sample of human serum by DPV and human lipoic acid ELISA Kit analyses via standard addition method illustrated the substantial conformity between the findings of both assays. The results of the DPV analyses resulted in acceptable recovery values (97.60%-99.10%) and appropriate values of the Relative Standard Deviation (RSD) (3.58%-5.07%), which demonstrated the great applicability and accuracy of the results of PV-CS/f-MWCNTs/GCE for determining α-LA concentration in biological fluids and pharmaceutical specimens.

Nanoengineered electrochemical sensor for sensitive detection of carbendazim in environmental waters using Er3NbO7/f-CNF nanocomposite.

Water contamination by agricultural chemicals is a pressing environmental issue today. Carbendazim (CBZ), a potent fungicide with broad-spectrum antifungal properties and significant toxicity, poses substantial risks to ecosystems and human health. This study introduces an advanced electrochemical sensor by modifying screen-printed carbon electrodes (SPCEs) with a nanocomposite of erbium niobate (Er3NbO7) and functionalized carbon nanofibers (f-CNF). The Er3NbO7/f-CNF nanocomposite enhances electrochemical performance through its high surface area, excellent electrical conductivity, and catalytic activity. This synergy results in exceptional attributes such as a low detection limit of 6.0 nmolL-1, low quantification limit of 19.98 nmolL-1, sensitivity of 3.522 µAµ(molL-1)-1.cm-2, and precision of 0.05%. The sensor demonstrates a wide linear range from 0.2 to 222 µmolL-1, combined with high selectivity and robust stability, making it suitable for precise CBZ detection. Successful deployment in environmental monitoring underscores its versatility and effectiveness in safeguarding human health and ecological balance, establishing it as a pivotal tool in environmental protection efforts.

Microbial synthesis of antimony sulfide to prepare catechol and hydroquinone electrochemical sensor by pyrolysis and carbonization.

The application of antimony sulfide sensors, characterized by their exceptional stability and selectivity, is of emerging interest in detection research, and the integration of graphitized carbon materials is expected to further enhance their electrochemical performance. This study represents a pioneering effort in the synthesis of carbon-doped antimony sulfide materials through the pyrolysis of the mixture of microorganisms and their synthetic antimony sulfide. The prepared materials are subsequently applied to electrochemical sensors for monitoring the highly toxic compounds catechol (CC) and hydroquinone (HQ) in the environment. Via cyclic voltammetry (CV) and impedance testing, we concluded that the pyrolytic product at 700 °C (Sb-700) demonstrated the best electrochemical properties. Differential pulse voltammetry (DPV) revealed impressive separation when utilizing Sb-700/GCE for simultaneous detection of CC and HQ, exhibiting good linearity within the concentration range of 0.1-140 µM. The achieved sensitivities of 24.62 µA µM-1 cm-2 and 22.10 µA µM-1 cm-2 surpassed those of most CC and HQ electrochemical sensors. Meanwhile, the detection limits for CC and HQ were as low as 0.18 µM and 0.16 µM (S/N = 3), respectively. Additional tests confirmed the good selectivity, reproducibility, and long-term stability of Sb-700/GCE, which was effective in detecting CC and HQ in tap water and river water, with recovery rates of 100.7%-104.5% and 96.5%-101.4%, respectively. It provides a method that combines green microbial synthesis and simple pyrolysis for the preparation of electrode materials in CC and HQ electrochemical sensors, and also offers a new perspective for the application of microbial synthesized materials.

Novel ZIFs nanostructures electro-engineered at carbon fiber for the highly sensitive and selective detection of isoeugenol.

Novel zeolitic imidazolate frameworks (ZIFs), classical subtypes of metal organic frameworks (MOFs), and nanostructures are electro-engineered onto carbon fiber (CF), leading to a unique freestanding electrochemical platform of budlike nano Zn-ZIFs decorated CF (BN-Zn-ZIFs/CF). The unique morphology, structure, and composition are characterized by electron microscopy and energy spectrum analysis. Notably, the BN-Zn-ZIFs/CF platform displays superb electrocatalysis towards the oxidation of isoeugenol with encouragingly low overpotential and high current response. The strong electrocatalytic oxidation capability of BN-Zn-ZIFs/CF makes it an excellent sensing platform for isoeugenol detection. BN-Zn-ZIFs/CF sensor exhibits high-performance isoeugenol sensing with an extremely low limit of detection (13 nM) and wide detection range (0.1-700 µM). Besides, the BN-Zn-ZIFs/CF sensor can greatly resist interference from common ions, major biomolecules, and some amino acids. Moreover, excellent reliability, stability, and practicality are obtained. Our work demonstrates that the as-prepared BN-Zn-ZIFs/CF can act as an high-performance electrochemical sensor for the isoeugenol detection, the well-developed ZIF nanocrystal-modified conductive substrates can be a unique platform for the efficient sensing of other molecules, and the electrochemical engineering strategy can be an effective method for the growing of fresh MOF nanocrystals at conductive substrates in various electrochemical applications.

An electrochemical biosensor for sensitive detection of live Salmonella in food via MXene amplified methylene blue signals and electrostatic immobilization of bacteriophages.

A novel bacteriophage-targeted electrochemical biosensor designed for accurate and quantitative detection of live Salmonella in food samples is presented. The biosensor is simply constructed by electrostatic immobilizing bacteriophages on MXene-nanostructured electrodes. MXene, renowned for its high surface area, biocompatibility, and conductivity, serves as an ideal platform for bacteriophage immobilization. This allows for a high-density immobilization of bacteriophage particles, achieving approximately 71 pcs µm-2. Remarkably, the bacteriophages immobilized MXene nanostructured electrodes still maintain their viability and functionality, ensuring their effectiveness in pathogen detection. Therefore, the proposed biosensor exhibited enhanced sensitivity with a low limit of detection (LOD) of 5 CFU mL-1. Notably, the biosensor shows excellent specificity in the presence of other bacteria that commonly contaminate food and can distinguish live Salmonella from a mixed population. Furthermore, it is applicable in detecting live Salmonella in food samples, which highlights its potential in food safety monitoring. This biosensor offers simplicity, convenience, and suitability for resource-limited environments, making it a promising tool for on-site monitoring of foodborne pathogenic bacteria.

An epitope imprinted electrochemical sensor for highly sensitive and selective determination of prostate-specific antigen.

A simple method for highly selective and sensitive prostate-specific antigen (PSA) detection using a molecularly imprinted electrochemical sensor is presented. The sensor was developed through an epitope imprinted strategy combined with electrochemical measurement techniques. An epitope molecularly imprinted polymer (EMIP) film was constructed on a AuNPs-coated gold electrode surface through electropolymerization, utilizing the C-terminus epitope of PSA (KWIKDTIVANP) as the template molecular and o-phenylenediamine as the functional monomer. The characteristics of EMIP film were investigated by using a scanning electron microscope and electrochemical test methods, including electrochemical impedance spectroscopy and cyclic voltammetry. Key parameters such as electropolymerization cycles, elution and rebinding times, and the molar ratio of template molecular to functional monomer were systematically optimized. The sensor demonstrated a detection limit (LOD) of 0.31 fg/mL and exhibited an excellent linear response towards PSA concentration ranging from 1.0 fg/mL to 0.1 µg/mL. Furthermore, the EMIP sensor showed excellent selectivity against other biological macromolecules, such as bovine serum albumin, human serum albumin, alpha-fetoprotein, and carcinoembryonic antigen. With recoveries between 95.89 and 106.04% for PSA detection in human serums the EMIP/AuNPs/AuE electrochemical sensor showed great potential in real sample analysis.

Rapid detection of tertiary butylated hydroquinone in food samples using Mn-MOF@f-CNF composite-modified screen-printed electrode.

Hydroquinone-based organic molecules are often used as unavoidable preservatives in the food industry. Among these additives, tertiary butylated hydroquinone (TBHQ) is widely employed as a preservative in various processed foods. However, the potential health risks associated with the excessive presence of TBHQ in food products have raised significant concerns. To address this pressing issuea novel binder-free composite composed of a manganese metal-organic framework and functionalized carbon nanofibers (Mn-MOF/f-CNF) has been developed as an electrode modifier for the ultrasensitive detection of TBHQ in food samples. The Mn-MOF/f-CNF composite was achieved using the ultrasonication method, revealing a lamellar sheet-like structure of the Mn-MOF and the curly thread-like fibrous structure of f-CNF. The developed Mn-MOF/f-CNF/SPE sensor system resulted in well-defined redox signals for TBHQ detection in a neutral pH solution. Compared to the unmodified SPE system, the modified system showed approximately a 300 mV reduction in overpotential and a twofold increase in peak current signal for TBHQ detection. The Mn-MOF/f-CNF/SPE sensor system showed a linear concentration window of 0.01 to 800 µM with a sensitivity of 6.28 µA µM-1 cm-2 and the obtained detection limit was 1.36 nM. Additionally, the proposed sensor displayed excellent reproducibility and repeatable results with an RSD of less than 5%. The real-time applicability of the Mn-MOF/f-CNF/SPE sensor system was demonstrated using real samples such as potato chips and instant noodles, showing excellent results with a recovery range of 95.1-98.5%.

Electrochemical sensor based on Cu2-xS/graphene heterostructures for sub-picomolar dopamine detection.

Detecting dopamine (DA) in biological samples is vital to understand its crucial role in numerous physiological processes, such as motion, cognition, and reward stimulus. In this work, p-type graphene on sapphire, synthesized via chemical vapor deposition, serves as substrate for the preparation of p-type Cu2-xS films through solid-phase sulfurization. The optimized Cu2-xS/graphene heterostructure, prepared at 250 °C using a 15-nm copper film sulfurized for 2 h, exhibits superior electron transfer performance, ideal for electrochemical sensing. It is confirmed that the spontaneous charge transfer from graphene to Cu2-xS, higher Cu(II)/Cu(I) ratio (~ 0.8), and the presence of well-defined nanocrystalline structures with an average size of ~ 35 nm in Cu2-xS significantly contribute to the improved electron transfer of the heterostructure. The electrochemical sensor based on Cu2-xS/graphene heterostructure demonstrates remarkable sensitivity towards DA, with a detection limit as low as 100 fM and a dynamic range greater than 109 from 100 fM to 100 µM. Additionally, it exhibits excellent selectivity even in the presence of uric acid and ascorbic acid 100 times higher, alongside notable storage and measurement stability and repeatability. Impressively, the sensor also proves capable of detecting DA concentrations as low as 100 pM in rat serum, showcasing its potential for clinically relevant analytes and promising applications in sensitive, selective, reliable, and efficient point-of-care diagnostics.

A double-conducting polymer nanowire-based electrochemical aptasensor for highly sensitive and low fouling detection of cortisol in saliva.

A cortisol biosensor was developed based on double-conducting polymer nanowires, which exhibits excellent conductivity, resistance to biological contamination, and outstanding sensing performance. The biosensor employs dual-mode electrochemical techniques, namely, differential pulse voltammetry (DPV) and chronoamperometry (CA), for the sensitive and low fouling detection of the glucocorticoid hormone cortisol. Experimental results demonstrated that the linear detection range of the biosensor in DPV mode was 1.0 × 10-14-1.0 × 10-8 M, with a detection limit of 0.131 × 10-14 M. In CA mode, the biosensor exhibited a detection range of 1.0 × 10-13-1.0 × 10-7 M and a detection limit of 0.313 × 10-13 M. The biosensor was successfully utilized for the rapid detection of cortisol in human saliva. The combination of a high-specificity cortisol aptamer and functionalized double-conducting polymer nanowires ensured the exceptional specificity and sensitivity of the biosensor in detecting real biological samples.

Ultrasensitive electrochemical detection of metronidazole using binder-free zinc-4,4'-oxybis(benzoic acid) MOF/GCE in real samples.

A novel electrochemical sensor is constructed by modifying the glassy carbon electrode (GCE) using a binder-free metal-organic framework of V-shaped linker 4,4'oxybis(benzoic acid) (OBA) and various transition metals (M-Zn, Mn, or Ni). The hydrothermally synthesized M-OBA MOFs demonstrated superior electron transfer ability and enhanced electro-reduction behaviour, making it highly effective for metronidazole (MTZ) detection. The optimized sensor demonstrated a linear response from 0.04 to 122.18 µM, a low detection limit (LOD) of 0.009 µM, and high sensitivity (0.48 µA µM-1 cm-2) using cyclic voltammetry (CV) and differential pulse voltammetry (DPV). The sensor also exhibited excellent selectivity in the presence of various ions, organic compounds, and other antibiotics. The Zn-OBA MOF sensor proves practical applicability for detecting MTZ in milk, honey, tap water, and MTZ tablets.

A novel dual-signal output strategy for POCT of CEA based on a smartphone electrochemical aptasensing platform.

A smartphone-based electrochemical aptasensing platform was developed for the point-of-care testing (POCT) of carcinoembryonic antigen (CEA) based on the ferrocene (Fc) and PdPt@PCN-224 dual-signal labeled strategy. The prepared PdPt@PCN-224 nanocomposite showed a strong catalytic property for the reduction of H2O2. Phosphate group-labeled aptamer could capture PdPt@PCN-224 by Zr-O-P bonds to form PdPt@PCN-224-P-Apt. Therefore, a dual signal labeled probe was formed by the hybridization between Fc-DNA and PdPt@PCN-224-P-Apt. The presence of CEA forced PdPt@PCN-224-P-Apt to leave the electrode surface due to the specific affinity, leading to the decrease of the reduction current of H2O2. At the same time, the Fc-DNA strand changed to hairpin structure, which made Fc closer to the electrode and resulted in the increase of the oxidation current of Fc. Thus, CEA can be accurately determined through both signals: the decrease of H2O2 reduction current and the increase of Fc oxidation current, which could avoid the false positive signal. Under the optimal conditions, the prepared aptasensor exhibited a wide linear range from 1 pg·mL-1 to 100 ng·mL-1 and low detection limits of 0.98 pg·mL-1 and 0.27 pg·mL-1 with Fc and PdPt@PCN-224 as signal labels, respectively. The aptasensor developed in this study has successfully demonstrated its capability to detect CEA in real human serum samples. These findings suggest that the proposed sensing platform will hold great potential for clinical tumor diagnosis and monitoring.

A novel electrochemical sensor for detection of luteolin in food based on 3D networked electrically interconnected SiO2@GO/MXene composite.

Luteolin (Lu), a compound with various biochemical and pharmacological activities beneficial to human health, has attracted researchers' attention. This study proposes an efficient and scalable method using ultrasound to intercalate graphene oxide (GO)-coated silica spheres (SiO2) into MXenes, resulting in a 3D conductive interconnected structural composite material. Characterization of the composite material was conducted using SEM, TEM, XRD, XPS, and Raman spectroscopy. MXenes exhibit excellent electrical conductivity, and the SiO2@GO surface with abundant hydroxyl and silanol groups provides high-binding active sites that facilitate Lu molecule enrichment. The formation of the 3D conductive interconnected structural composites enhances charge transport, significantly improving sensor sensitivity. Consequently, the sensor demonstrates excellent detection capabilities (detection range 0.03-7000 nM, detection limit 12 pM). Furthermore, the sensor can be applied to quantitative determination of Lu in real samples, including chrysanthemums, Jiaduobao, honeysuckle, purple perilla, and peanut shells, achieving recoveries between 98.2 and 104.7%.

Electrochemical detection of poly(3-hydroxybutyrate) production from Burkholderia glumae MA13 using a molecularly imprinted polymer-reduced graphene oxide modified electrode.

The development and application of an electrochemical sensor is reported for detection of poly(3-hydroxybutyrate) (P3HB) - a bioplastic derived from agro-industrial residues. To overcome the challenges of molecular imprinting of macromolecules such as P3HB, this study employed methanolysis reaction to break down the P3HB biopolymer chains into methyl 3-hydroxybutyrate (M3HB) monomers. Thereafter, M3HB were employed as the target molecules in the construction of molecularly imprinted sensors. The electrochemical device was then prepared by electropolymerizing a molecularly imprinted poly (indole-3-acetic acid) thin film on a glassy carbon electrode surface modified with reduced graphene oxide (GCE/rGO-MIP) in the presence of M3HB. Electrochemical impedance spectroscopy (EIS), cyclic voltammetry (CV), scanning electron microscopy with field emission gun (SEM-FEG), Raman spectroscopy, attenuated total reflection Fourier-transform infrared (ATR-FTIR) and X-ray Photoelectron Spectroscopy (XPS) were employed to characterize the electrode surface. Under ideal conditions, the MIP sensor exhibited a wide linear working range of 0.1 - 10 nM and a detection limit of 0.3 pM (n = 3). The sensor showed good repeatability, selectivity, and stability over time. For the sensor application, the bioproduction of P3HB was carried out in a bioreactor containing the Burkholderia glumae MA13 strain and sugarcane byproducts as a supplementary carbon source. The analyses were validated through recovery assays, yielding recovery values between 102 and 104%. These results indicate that this MIP sensor can present advantages in the monitoring of P3HB during the bioconversion process.

Comparative performance analysis of mussel-inspired polydopamine, polynorepinephrine, and poly-α-methyl norepinephrine in electrochemical biosensors.

Polydopamine (PDA) has garnered significant interest for applications in biosensors, drug delivery, and tissue engineering. However, similar polycatecholamines like polynorepinephrine (PNE) with additional hydroxyl groups and poly-α-methylnorepinephrine (PAMN) with additional hydroxyl and methyl groups remain unexplored in the biosensing domain. This research introduces three innovative biosensing platforms composed of ternary nanocomposite based on reduced graphene oxide (RGO), gold nanoparticles (Au NPs), and three sister polycatecholamine compounds (PDA, PNE, and PAMN). The study compares and evaluates the performance of the three biosensing systems for the ultrasensitive detection of Mycobacterium tuberculosis (MTB). The formation of the nanocomposites was meticulously examined through UV-Visible, Raman, XRD, and FT-IR studies with FE-SEM and HR-TEM analysis. Cyclic voltammetry and differential pulse voltammetry measurements were also performed to determine the electrochemical characteristics of the modified electrodes. Electrochemical biosensing experiments reveal that the RGO-PDA-Au, RGO-PNE-Au, and RGO-PAMN-Au-based biosensors detected target DNA up to a broad detection range of 0.1 × 10-8 to 0.1 × 10-18 M, with a low detection limit (LOD) of 0.1 × 10-18, 0.1 × 10-16, and 0.1 × 10-17 M, respectively. The bioelectrodes were proved to be highly selective with excellent sensitivities of 3.62 × 10-4 mA M-1 (PDA), 7.08 × 10-4 mA M-1 (PNE), and 6.03 × 10-4 mA M-1 (PAMN). This study pioneers the exploration of two novel mussel-inspired polycatecholamines in biosensors, opening avenues for functional nanocoatings that could drive further advancements in this field.

Platinum-ruthenium-iron embedded in nitrogen-doped ordered mesoporous carbon for adrenaline electrochemical sensing study.

A novel nitrogen-doped ordered mesoporous carbon (OMC) pore-embedded growth Pt-Ru-Fe nanoparticles (Pt1-Ru7.5-Fex@N-OMCs) composite was designed and synthesized for the first time. SBA-15 was used as a template, and dopamine was used as a carbon and nitrogen source and metal linking reagent. The oxidative self-polymerization reaction of dopamine was utilized to polymerize dopamine into two-dimensional ordered SBA-15 template pores. Iron porphyrin was introduced as an iron source at the same time as polymerization of dopamine, which was introduced inside and outside the pores using dopamine-metal linkage. Carbonization of polydopamine, nitrogen doping and iron nanoparticle formation were achieved by one-step calcination. Then the templates were etched to form Fex@N-OMCs, and finally the Pt1-Ru7.5-Fex@N-OMCs composites were stabilized by the successful introduction of platinum-ruthenium nanoparticles through the substitution reaction. The composite uniformly embeds the transition metal nanoparticles inside the OMC pores with high specific surface area, which limits the size of the metal nanoparticles inside the pores. At the same time, the metal nanoparticles are also loaded onto the surface of the OMCs, realizing the uniform loading of metal nanoparticles both inside and outside the pores. This enhances the active sites of the composite, promotes the mass transfer process inside and outside the pores, and greatly enhances the electrocatalytic performance of the catalyst. The material shows high electrocatalytic performance for adrenaline, which is characterized by a wide linear range, high sensitivity and low detection limit, and can realize the detection of actual samples.

Proving the automatic benchtop electrochemical station for the development of dopamine and paracetamol sensors.

The introduced work represents an implementation of the automatic benchtop electrochemical station (BES) as an effective tool for the possibilities of high-throughput preparation of modified sensor/biosensors, speeding up the development of the analytical method, and automation of the analytical procedure for the determination of paracetamol (PAR) and dopamine (DOP) as target analytes. Within the preparation of gold nanoparticles modified screen-printed carbon electrode (AuNPs-SPCE) by electrodeposition, the deposition potential EDEP, the deposition time tDEP, and the concentration of HAuCl4 were optimized and their influence was monitored on 1 mM [Ru(NH3)6]3+/2+ redox probe and 50 µM DOP. The morphology of the AuNPs-SPCE prepared at various modification conditions was observed by SEM. The analytical performance of the AuNPs-SPCE prepared at different modification conditions was evaluated by a construction of the calibration curves of DOP and PAR. SPCE and AuNPs-SPCE at modification condition providing the best sensitivity to PAR and DOP, were successfully used to determine PAR and DOP in tap water by "spike-recovery" approach. The BES yields better reproducibility of the preparation of AuNPs-SPCE (RSD = 3.0%) in comparison with the case when AuNPs-SPCE was prepared manually by highly skilled laboratory operator (RSD = 7.0%).

Cubic Na0.5Bi0.5TiO3 nanoperovskite significantly expands the application of sensitive immunosensor for the detection of carcinoembryonic antigen.

Nanosized sodium bismuth perovskite titanate (NBT) was synthesized and first used as the electrochemical immune sensing platform for the sensitive detection of carcinoembryonic antigen (CEA). Gold nanoparticles (Au NPs) grew on the surface of NBT through forming Au-N bond to obtain Au@NBT, and a label-free electrochemical immunosensor was proposed using Au@NBT as an immunosensing recognizer towards CEA. The well-ordered crystal structure of NBT was not changed at all after the modification of Au NPs outside, but significantly improved the conductivity, catalytic activity, and biocompatibility of the Au@NBT-modified electrode. The unique cubic crystal nanostructure of NBT offered a large active area for both Au NP modification and the subsequent immobilization of biomolecules over the electrode surface, triggering the effective generation of promising properties of the proposed Au@NBT-based electrochemical immunosensor. As expected, favorable detection performances were achieved using this immunosensor towards CEA detection, where a good linear relationship between the current response and CEA concentration was obtained in the concentration range 10 fg mL-1 to 100 ng mL-1 with a low detection limit (LOD) of 13.17 fg mL-1. Also, the significantly enhanced selectivity, and stability guaranteed the promising electrochemical properties of this immunosensor. Furthermore, the analysis of real serum samples verified the high feasibility of this new method in clinical CEA detection. This work opens a new window for the application of nanoperovskite in the early detection of CEA.

Surface modification prepared porous copper oxide/(Cu-S)n metal-organic framework/reduced graphene oxide hierarchical structure for highly selective electrochemical quercetin detection.

Electrochemical alkalization of (Cu-S)n metal-organic framework (MOF) and graphene oxide ((Cu-S)n MOF/GO) composite yields a new CuO/(Cu-S)n MOF/RGO (reduced GO) composite with porous morphology on screen printed carbon electrode (SPCE) which facilitated the electron transfer properties in electrochemical quercetin (QUE) detection. A selective QUE detection ability has been demonstrated by the constructed electrochemical sensor (CuO/(Cu-S)n MOF/RGO/SPCE), which also has a broad dynamic range of 0.5 to 115 µM in pH 3 by differential pulse voltammetry. The detection limit is 0.083 µM (S/N = 3). In this study, it was  observed that the real samples contained 0.34 mg mL-1 and 27.7 µg g-1 QUE in wine and onion, respectively.

Ratiometric electrochemical determination of hydroxyl radical based on graphite paper modified with metal-organic frameworks and impregnated with salicylic acid.

Hydroxyl radical (•OH) detection is pivotal in medicine, biochemistry and environmental chemistry. Yet, electrochemical method-specific detection is challenging because of hydroxyl radicals' high reactivity and short half-life. In this study, we aimed to modify the electrode surface with a specific recognition probe for •OH. To achieve this, we conducted a one-step hydrothermal process to fabricate a CoZnMOF bimetallic organic framework directly onto conductive graphite paper (Gp). Subsequently, we introduced salicylic acid (SA) and methylene blue (MB), which easily penetrated the pores of CoZnMOF. By selectively capturing •OH by SA and leveraging the electrochemical signal generated by the reaction product, we successfully developed an electrochemical sensor Gp/CoZnMOF/SA + MB. The prepared sensor exhibited a good linear relationship with •OH concentrations ranging from 1.25 to 1200 nM, with a detection limit of 0.2 nM. Additionally, the sensor demonstrated excellent reproducibility and accuracy due to the incorporation of an internal reference. It exhibited remarkable selectivity for •OH detection, unaffected by other electrochemically active substances. The establishment of this sensor provides a way to construct MOF-modified sensors for the selective detection of other reactive oxygen species (ROS), offering a valuable experimental basis for ROS-related disease research and environmental safety investigations.