No significant change of tibiofemoral rotation after femoral rotational osteotomy in patients with patellofemoral instability.

PURPOSE: An increased value of tibiofemoral rotation is frequently observed in patients with patellofemoral instability or maltracking. Nevertheless, the appropriate approach for addressing this parameter remains unclear so far. One potential approach for correcting tibiofemoral rotation is femoral rotational osteotomy. We hypothesized that femoral rotational osteotomy affects tibiofemoral rotation. METHODS: All patients who underwent femoral rotational osteotomy between January 2018 and May 2022 were included in this study. Pre- and postoperative tibiofemoral rotation and the degree of femoral rotation were measured using two-dimensional (2D) and three-dimensional (3D) measurements. The effect of femoral rotation on tibiofemoral rotation was assessed. RESULTS: Forty knees (18 right and 22 left) of 36 patients (28 females and 8 males) were included. Mean preoperative femoral torsion was 32.1 ± 10.1° in 2D and 30.8 ± 10.1° in 3D. Femoral rotation was performed by -14.1 ± 8.3° using 2D measurements and -15.0 ± 8.0° using 3D measurements. Tibiofemoral rotation changed from 9.9 ± 6.2° to 9.7 ± 6.0° (p = n.s.) in 2D, and from 10.2 ± 5.5° to 9.4 ± 5.4° (p = n.s.) in 3D. CONCLUSION: Tibiofemoral rotation showed no significant changes after femoral rotational osteotomy. Hence, femoral rotational osteotomy cannot be used to correct tibiofemoral rotation in addition to correcting the femoral version. Other surgical techniques need to be evaluated if correction of tibiofemoral rotation is required. LEVEL OF EVIDENCE: Level III.

Incidence of Rotational Malalignment after Intertrochanteric Fracture Intramedullary Nailing: A CT-Based Prospective Study.

Background and Objectives: Rotational malformation after intramedullary nailing of intertrochanteric fractures is a relatively common, possibly severe, and difficult-to-detect complication, since intraoperative radiographic imaging allows for the assessment of the quality of reduction in the frontal and sagittal planes, but not in the transverse plane. The purpose of this study is to evaluate the rotational malalignment after intramedullary nailing of intertrochanteric fractures and to investigate a possible connection with specific patients' or fractures' characteristics. Materials and Methods: 74 patients treated with intramedullary nailing due to an intertrochanteric fracture underwent a postoperative CT of the pelvis-hips and knees. The value of the anteversion was measured both in the operated-on (angle 1) and in the healthy hip (angle 2) based on the technique described by Jeanmart et al. and the difference in anteversion (D angle = angle 1 minus angle 2) was calculated. A positive D angle indicated the presence of excessive internal overcorrection of the distal fragment during fracture reduction, while a negative D angle indicated the presence of excessive external overcorrection. The absolute value of the D angle represents the postoperative difference in anteversion between the two hips. The patients were divided into three groups according to this value: group A, with D < 5° (physiological difference); group B, with 5° < D < 15° (acceptable rotational alignment); and group C, with D ≥ 15° (rotational deformity). Results: Group A constitutes 56.8%, group B 12.2%, and group C 31.1% of the study population. Overall, 79.7% of the patients presented a positive angle D, while, for group C, the percentage was even higher at 91.3%. According to the AO/OTA classification system, 37.8% of the cases were stable fractures, 47.3% were unstable fractures, and 14.9% were reverse oblique fractures. Based on our analysis, the type of fracture has a serious impact on the rotational alignment, since the statistical significance of the mean angle D for the three types of fracture is reliable (p = 0.029). Stable fractures present the lowest anteversion difference values, while reverse oblique fractures present the highest difference. Conclusions: Our study reveals that the percentage of rotational malalignment after the intramedullary nailing of intertrochanteric fractures remains high (31.1%), despite the proper use of radiographic imaging during the intraoperative fracture reduction. In most cases (91.3%), this malalignment appears to be a matter of internal overcorrection. A clear correlation between hip's rotational deformity and patients' functional outcome has yet to be proven, and constitutes our objective in the near future.

Posterior C1-C2 fusion for atlantoaxial rotatory fixation after posterior fossa craniotomy in a 4-year old: a case report.

INTRODUCTION: This study aimed to highlight that atlantoaxial rotatory fixation (AARF) can be related to neurosurgery procedures in children, with an afterward demonstration of good results after halo-gravity traction and C1-C2 stabilization using the Harms technique. CASE DESCRIPTION: To the best of our knowledge, this is the first case to report a 4-year-old boy who presented with AARF after a posterior fossa craniotomy to treat a cerebellar astrocytoma. At our medical facility, AARF was diagnosed using plain radiography and computed tomography imaging. The patient was treated with continuous cranial traction for 14 days. Initially, we detected that the patient had no C1 posterior arch or C2 spinous process; therefore, the best option was to perform the Harms technique. Postoperatively, the patient was placed in a cervical collar for 4 weeks. At the 4-year postoperative follow-up, the patient was doing well and had not developed any complications. CONCLUSION: Herein, we report a case in which AARF can be developed after neurosurgical procedure. Surgical techniques used for atlantoaxial subluxation should be carefully selected. In our case, the Harms technique after cranial traction was an excellent option for correcting and stabilizing the abnormal neck position. However, further studies are required to determine the best technique to use in the pediatric population.

A pre-operative grade 3 J-sign adversely affects short-term clinical outcome and is more likely to yield MPFL residual graft laxity in recurrent patellar dislocation.

PURPOSE: The purposes of this study were to investigate the anatomical risk factors of grade 3 J-sign and analyse the influence of J-sign grades on the short-term clinical outcomes of patients with recurrent patellar dislocation. METHODS: From 2016 to 2018, a total of 168 patients with recurrent patellar dislocation (187 knees) underwent medial patellofemoral ligament reconstruction with or without tibial tuberosity medialization. Pre-operative J-sign severity was graded according to a previously described classification (grades 1-3). Potential anatomical risk factors of J-sign were explored. Comparisons were assessed between patients with different grades of J-sign using univariate and binary logistic regression analyses. The Kujala score was assessed and compared with pre-operative values, and stress fluoroscopy was performed to assess medial patellofemoral ligament residual graft laxity. Among the 130 included cases, 104 knees with at least 1-year follow-up were included in the clinical outcome analyses to explore the influence of several anatomical factors and J-sign grade on short-term clinical outcomes. RESULTS: A total of 118 patients (130 knees) were included in the present study. The median age at surgery was 21 years (range 13-38), and 111 affected knees belonged to female patients (85%). Univariate and multivariate logistic regressions between the grade 3 group and the grade 1-2 groups showed that increased femoral anteversion, excessive external tibial torsion, and patella alta were three independent risk factors of grade 3 J-sign in patients with recurrent patellar dislocation. A total of 104 knees with at least a 1-year follow-up were included in the clinical outcome analyses. The median Kujala score improved from 54 (range, 38-72) pre-operatively to 86 (range, 70-100) post-operatively. Although no re-dislocation was reported during the follow-up, 6 out of 32 patients in the grade 3 group demonstrated "MPFL residual graft laxity" based on post-operative stress radiography (18.8%), which was significantly higher than in the grade 1-2 groups (0%, p < 0.001). Subgroup analysis showed that patients with grade 3 J-sign had significantly lower post-operative Kujala scores than those with grade 1-2 J-sign (p < 0.001). Moreover, increased femoral anteversion (≥ 30°) was correlated with an inferior post-operative Kujala score (p = 0.023). CONCLUSION: The three independent anatomic risk factors of grade 3 J-sign in patients with recurrent patellar dislocation were increased femoral anteversion, excessive external tibial torsion, and patella alta. A pre-operative grade 3 J-sign was correlated with a lower post-operative Kujala score and more "MPFL residual graft laxity" in patients with recurrent patellar dislocation treated with MPFL reconstruction with or without tibial tuberosity medialization at a minimum 1-year follow-up. LEVEL OF EVIDENCE: III.

Rotational biplanar Chevron osteotomy.

INTRODUCTION: The Chevron osteotomy is a reliable and popular osteotomy for treating hallux valgus worldwide. Many modifications have been described, but none of them address the rotational deformity of the first metatarsal. The objective of this study is to describe a variation of biplanar Chevron osteotomy which can address first metatarsal rotation when necessary. METHODS: The indications for the Rotational Biplanar Chevron Osteotomy (RBCO) are mild to moderate hallux valgus deformity associated with hallux pronation related to internal rotation of the first metatarsal bone. We describe a technique that uses a medial based wedge parallel to the plantar limb of the osteotomy in order to make the distal fragment free to correct rotation. RESULTS: The more recent concern about hallux valgus surgery is the very interesting concept that this deformity really occurs in three different planes, and we may have mistreated the rotation component with our current techniques. Many authors have revisited many common techniques in order to adapt them to correct metatarsal pronation. To our best knowledge, this is the first paper to describe a modification of the Chevron osteotomy to address the rotation of the first metatarsal. CONCLUSION: We can conclude that the rotational biplanar Chevron osteotomy can be an useful tool in the treatment of mild hallux valgus associated with metatarsal pronation.

Rotational Corrective Osteotomy for Malunited Distal Diaphyseal Radius Fractures in Children and Adolescents.

PURPOSE: To report our method of computer-planned rotational corrective osteotomy for malunited distal diaphyseal radius fractures in children and adolescents using a custom jig and to review the results of 4 cases. METHODS: Four patients (mean age, 13 years; range, 11-16 years) underwent computer-planned rotational corrective osteotomy for malunited distal diaphyseal radius fracture using a custom jig. We retrospectively evaluated their radiographic and clinical data. RESULTS: In patients who had marked restriction of forearm supination before osteotomy, the mean arc of forearm supination improved from 5° before surgery to 79° after surgery. Angular deformity on x-ray, range of forearm rotation, and grip strength all improved after surgery. Mild and moderate pain reported by 1 and 2 patients, respectively, was resolved after surgery. CONCLUSIONS: Computer-planned rotational corrective osteotomy for malunited distal diaphyseal radius fracture in children and adolescents using a custom jig is a strategy that facilitates the surgical procedure by accurately correcting both rotational and angular deformities on 1 plane in a single procedure. TYPE OF STUDY/LEVEL OF EVIDENCE: Therapeutic V.

In-Toeing Is Often a Primary Care Orthopedic Condition.

OBJECTIVE: To evaluate in-toeing consults to a pediatric orthopedic clinic to determine the proportion that could be managed by a primary care physician. STUDY DESIGN: A prospective registry was created for 143 consecutive children referred to a pediatric orthopedic clinic for "in-toeing." Each patient underwent a careful history and physical examination, which included a rotational profile. We recorded the final diagnosis, treatment offered, follow-up visit results, and the source of the referral. RESULTS: After pediatric orthopedic evaluation, 85% of patients had a confirmed diagnosis of in-toeing, and 15% had a different final diagnosis. Seventy-four percent of patients had 1 consultation visit, 18% had 2, and 8% had >2 visits. None of the referred patients was a candidate for treatment by casting or surgery. CONCLUSION: In most cases, in-toeing is a normal variation of development that can be managed by counseling and observation by the primary care physician alone. Rare cases of severe in-toeing >2 standard deviations from the mean should likely still prompt referral to a pediatric orthopedic surgeon for potential intervention.

Correction of rotational deformities in long bones using guided growth: a scoping review.

Purpose: The objective of this scoping review was to describe the extent and type of evidence of using guided growth to correct rotational deformities of long bones in children. Methods: This scoping review was conducted in accordance with the JBI methodology for scoping reviews. All published and unpublished studies investigating surgical methods using guided growth to perform gradual rotation of long bones were included. Results: Fourteen studies were included: one review, three clinical studies, and ten preclinical studies. In the three clinical studies, three different surgical methods were used on 21 children. Some degree of rotation was achieved in all but two children. Adverse effects reported included limb length discrepancy (LLD), knee stiffness and rebound of rotation after removal of tethers. Of the ten preclinical studies, two were ex vivo and eight were in vivo. Rotation was achieved in all preclinical studies. Adverse effects reported included implant extrusions, LLD, articular deformities, joint stiffness and rebound of rotation after removal of tethers. Two of the studies reported on histological changes. Conclusions: All studies conclude that guided growth is a potential treatment for rotational deformities of long bones. There is great variation in animal models and surgical methods used and in reported adverse effects. More research is needed to shed light on the best surgical guided growth method, its effectiveness as well as the involved risks and complications. Based on current evidence the procedure is still to be considered experimental. Level of evidence: 4.

An Innovative Plate Concept for Rotational Guided Growth: A Porcine Pilot Study.

Background Rotational deformities in children are currently treated with an osteotomy, acute de-rotation, and surgical fixation. Meanwhile, guided growth is now the gold standard in pediatric coronal deformity correction. This study aimed to evaluate the feasibility of a novel implant intended for rotational guided growth (RotOs Plate) in a large porcine animal model. Methodology A submuscular plate was inserted on the medial and lateral aspect of the distal femoral physis of the left femur in 6 pigs. Each plate was anchored with a screw in the metaphysis and epiphysis respectively. The plates were expected to rotate the femur externally. The right femur acted as a control in a paired design. The animals were housed for 12 weeks after surgery. MRI scanning of both femora was performed before euthanasia after 12 weeks. Rotation was determined as the difference in the femoral version on MRI between the operated and non-operated femur after 12 weeks. Results External rotation in all operated femurs was observed. The mean difference in the femoral version on MRI between operated and non-operated femurs was 12.5° (range 9°-16°). No significant changes in axial growth were detected. Conclusions This study shows encouraging results regarding rotational guided growth, which may replace current invasive surgical treatment options for malrotation in children. However, further studies addressing potential secondary deformities are paramount and should be carried out.

Evaluation of crankshaft phenomenon after posterior fusion for early onset scoliosis using an inverse trigonometric function: a multicenter retrospective cohort study.

PURPOSE: The crankshaft phenomenon (CSP) is a corrective loss after posterior surgery for early onset scoliosis (EOS). However, an accurate method for CSP evaluation has yet to be developed. In this study, we evaluated pedicle screw (PS) length and rotation angle using an inverse trigonometric function and investigated the prevalence of the CSP. METHODS: Fifty patients from nine institutions (mean age 10.6 years, male/female ratio 4:46) who underwent early definitive fusion surgery at ≤ 11 years of age were included. The rotation angle was calculated as arctan (lateral/frontal PS length) using radiography. Measurements were taken at the apex and lower instrumented vertebra (LIV) immediate, 2-, and 5-year postoperatively. CSP was defined as a rotation angle progression ≥ 5°. We divided patients into CSP and non-CSP groups and measured the demographic parameters, Risser grade, state of the triradiate cartilage, major coronal Cobb angle, T1-T12 length, T1-S1 length, and presence of distal adding-on (DAO). We compared these variables between groups and investigated the correlation between the measured variables and vertebral rotation. Logistic regression analysis investigated factors associated with CSP. RESULTS: The rotation angle progressed by 2.4 and 1.3° over 5 years for the apex and LIV, respectively. CSP occurred in 15 cases (30%), DAO in 11 cases (22%), and CSP and DAO overlapped in 4 cases (8%). In the CSP group, the T1-T12 length was low immediate postoperatively. The rotation angle was negatively correlated with preoperative height (r = - 0.33), T1-T12 length (r = - 0.35), and T1-S1 length (r = - 0.30). A lower preoperative T1-T12 length was associated with CSP (odds ratio: 0.996, p = 0.048). CONCLUSIONS: CSP occurred in 30% of patients with EOS who underwent definitive fusion. The presence of CSP was associated with a lower preoperative T1-T12 length. LEVEL OF EVIDENCE: Diagnosis, level IV.

The effect of functional calibration methods on gait kinematics in adolescents with idiopathic rotational deformity of the femur.

BACKGROUND: Due to anatomical deviations, assumptions of the conventional calibration method for gait analysis may be violated in individuals with rotational deformities of the femur. Functional calibration methods were compared with conventional methods in this group for 1) localization of the hip joint center and orientation of the knee axis, and 2) gait kinematics. METHODS: Twenty-four adolescents with idiopathic rotational deformity of the femur underwent gait analysis and a CT scan. During standing, distance between hip joint centers and knee axis orientation were compared between calibration methods, with CT serving as reference for hip joint center estimation. Gait kinematics were compared using statistical parametric mapping. FINDINGS: The conventional calibration method estimated the hip joint center closer to the CT reference (4±12 mm more lateral) than the functional calibration method (26 ± 20 mm more lateral). Orientation of the knee joint axis was 2.6° less internal in the functional calibration method. During gait, statistical parametric mapping revealed significantly more hip flexion, less external hip rotation during the swing phase, less knee varus-valgus motion, and larger knee flexion angles when applying the functional method. INTERPRETATION: Functional calibration methods were less accurate in determining the hip joint center location than the conventional calibration method and resulted in a knee joint axis that was less internally rotated. Importantly, there was less knee joint angle crosstalk during gait when using the functional method. Although differences between methods on gait kinematics were within clinically acceptable limits for the sagittal plane, relatively larger differences on transversal hip kinematics may hold clinical importance.

Multiple drill hole osteotomy and Herbert screw for correcting a-2 years ring finger phalanx media malunion: A case report.

INTRODUCTION AND IMPORTANCE: The rotational deformity is formed due to the instability of the fixation device used before in a spiral or oblique fracture pattern, and will create uncomfortable sensation also disturb daily activities. This condition usually treated with several methods of osteotomies and implants, that involving large wound and longer period of healing. CASE PRESENTATION: A 27-year-old male with chief complaint of discomfort sensation when the ring finger flexed and it was disturbing the daily activities. Two years ago, the patient was diagnosed with minimally displace closed fracture of the ring finger phalanx media and treated with buddy tapping for six months and become a malunion until now. Multiple drill hole osteotomy were made to correct the rotational position and fixed with Herbert screws. Three months follow up, the wound healed nicely and able to perform his daily activity. CLINICAL DISCUSSION: Malunion that was formed from previous inadequate treatment could make uncomfortable sensation and disturbing daily activities usually treated with large osteotomies. Multiple drill hole (MDH) usage in combination with the Herbert screw to fix the new fracture line had several advantages compared to standard methods that were previously performed. CONCLUSION: The combination of multiple drill hole and Herbert screws could be an alternative procedure with minimal surgical wounds. Without implant removal in the future, the patient can proceed to rehabilitation and return to his daily activities.

Cavovarus With a Twist: Midfoot Coronal and Axial Plane Rotational Deformity in Charcot-Marie-Tooth Disease.

BACKGROUND: The cavovarus deformity of Charcot-Marie-Tooth (CMT) disease is often characterized by a paradoxical relationship of hindfoot varus and forefoot valgus. The configuration of the midfoot, which links these deformities, is poorly understood. Accurate assessment of 3-dimensional alignment under physiologic loadbearing conditions is possible using weightbearing computed tomography (WBCT). This is the first study to examine the rotational deformity in the midfoot of CMT patients and, thus, provide key insights to successful correction of CMT cavovarus foot. METHODS: A total of 27 WBCT scans from 21 CMT patients were compared to control WBCTs from 20 healthy unmatched adults. CMT patients with a history of bony surgery, severe degenerative joint disease, or open physes in the foot were excluded. Scans were analyzed using 3-dimensional software. Anatomic alignment of the tarsal bones was calculated relative to the anterior-posterior axis of the tibial plafond in the axial plane, and weightbearing surface in the coronal plane. RESULTS: Maximal rotational deformity in CMT patients occurred at the transverse tarsal joints, averaging 61 degrees of external rotation (supination), compared to 34 degrees among controls (P < .01). The talonavicular joint was also the site of peak adduction deformity in the midfoot, with an average talonavicular coverage angle measuring 12 degrees compared with -11 degrees in controls (P < .01). CONCLUSION: This 3-dimensional WBCT analysis is the first to isolate and quantify the multiplanar rotational deformity in the midfoot of CMT patients. Compared with healthy unmatched control cases, CMT patients demonstrated increased axial plane adduction and coronal plane rotation at the talonavicular (TN) joint. These findings support performing soft tissue release at the TN joint to abduct and derotate the midfoot as a first step for targeted deformity correction. LEVEL OF EVIDENCE: Level III, retrospective case-control study.

First Metatarsal Rotation in Hallux Valgus Deformity.

Rotation of the first metatarsal (M1) as a potential etiological factor of hallux valgus (HV) deformity was described relatively early in the description of HV pathoanatomy. However, because biplanar radiographs have been the standard method for imaging HV, clinicians primarily developed measurement methods and corrective operations confined to 2 dimensions, medial-lateral and inferior-superior. Recently, as our understanding of HV pathoanatomy has further developed, aided in part by advanced imaging technology, M1 rotation about its axis ("axial rotation") and its implications for HV deformity and treatment has reemerged. The goal of this review is to summarize M1 rotation in HV from a historical perspective, to present the current understanding of its potential role in the etiology/pathogenesis of HV, and to summarize relevant imaging and operative considerations with respect to M1 rotation.Level of Evidence: Level III, systematic review.

The Rotational Positioning of the Bones in the Medial Column of the Foot: A Weightbearing CT Analysis.

BACKGROUND: Malrotation of medial column bones of the foot has been advocated as an important factor in foot conditions such as hallux valgus and progressive collapsing foot deformity. Although stated as a deformity component, variances of normality in the general population are not completely understood. This study intended to describe the rotational profile of all medial column bones using weightbearing computed tomography (WBCT) images in a cohort of patients with different foot and ankle problems. METHODS: In this retrospective study, 110 feet of 95 consecutive patients that received a WBCT for assessment of different foot and ankle pathologies were included. Measurements were performed by a blinded fellowship-trained orthopedic foot and ankle surgeon. Rotation of the navicular, medial cuneiform, proximal and distal first metatarsal as well as proximal phalanx of the first toe were recorded. Positive values were considered pronation and negative values were considered supination. Rotational profile of each bone/ segment was assessed by ANOVA and comparison between each segment was performed using Wilcoxon Each-Pair analysis. P-values of less than 0.05 were considered significant. RESULTS: On average, a rotational positioning in pronation (internal rotation) was observed for all medial column bones. The navicular (43.2°, CI 41.1°-45.3°) and the proximal metatarsal (33.9°, CI 31.8°-36.0°) showed the highest mean rotation values. The medial cuneiform presented the lowest mean pronation (6.1°, CI 4.0°-8.3°). Comparison between each bone segment demonstrated statistically significant differences of rotational alignment for the different bones (p<0.0001), with the exception of the distal metatarsal and proximal phalanx, that had similar amounts of pronation. A zig-zag rotational pattern of alignment was observed from proximal to distal, with relative supination/pronation of adjacent medial column bones. CONCLUSION: The overall rotational profile of medial column bones was found to be in absolute pronation, most pronounced at the navicular and proximal first metatarsal, with significant differences in the amount of pronation when comparing most of the medial column bones. The presented data may be utilized as reference/ baseline values of medial column rotation, supporting future prospective, comparative and controlled studies.Level of Evidence: IV.

Preoperative tibiofemoral rotational alignment is a risk factor for component rotational mismatch in total knee arthroplasty.

BACKGROUND: Rotational mismatch between the femoral and tibial components is reported to be a risk factor for unsuccessful total knee arthroplasty (TKA). However, the rotational mismatch can still occur even when each component is aligned within the desired angle. Therefore, there may be other unknown factors. This study aims to investigate a risk factor for component rotational mismatch in TKA. The authors hypothesized a significant correlation between the rotational mismatch angle and not only the rotational alignments of components, but also the preoperative tibiofemoral rotation angle. METHOD: This retrospective cohort study included 79 knees who underwent TKA. Computed tomography images were obtained preoperatively and 2 weeks after surgery for the component positional measurement. The postoperative component rotational mismatch angle between the tibial and femoral components and the rotational alignment of each tibial and femoral component to anatomical axes was evaluated. In addition, the preoperative rotational angle between the tibia and femur bones and patients' demographics were also investigated. The correlation between the postoperative component rotational mismatch angle and perioperative variables was analyzed to identify risk factors for component rotational mismatch. RESULTS: The mean component rotational mismatch angle was 1.8° of internal rotation of the tibial component relative to the femoral component, and the angle ranged from 11.3° of internal rotation to 7.3° of external rotation of the tibial component. Multivariate regression analysis showed that the preoperative rotational alignment between the tibia and femur and the rotational alignment of each component were influential factors in the postoperative component rotational mismatch angle. CONCLUSION: The preoperative tibiofemoral rotational alignment and the rotational alignment of each tibial and femoral component and are risk factors for the postoperative component rotational mismatch in TKA.

Compensatory mechanisms in children with idiopathic lower extremity internal rotational malalignment during walking and running.

BACKGROUND: Noticeable in-toeing gait is present in most children with internal rotational malalignment and often a reason to consult an orthopedic specialist. The risk of tripping may be higher for these patients. RESEARCH QUESTION: The aim of this study was to determine compensatory mechanisms adopted by children with internal rotational deformities to avoid tripping and falling during walking and running. METHODS: Sixty-nine patients between 5-18 years with idiopathic internal rotational malalignment were retrospectively included and subdivided into three groups: 18 patients with internal tibial torsion (ITT), 25 patients with internal femoral torsion (ITF) and 26 patients with both (ITB). Twenty-two typically developing age-matched children (TD) were analyzed for comparison. Three-dimensional gait data were evaluated. ANOVA's on two factors, group (ITT, ITF, ITB, TD) and movement (walking, running) with post-hoc t-tests were used to identify significant differences between groups. RESULTS: All groups had significantly greater step width than TD during walking (P ≤ .002) and all torsional groups had significantly greater step width during running (P ≤ .001). Similarly, all torsional groups showed greater peak ankle dorsiflexion in swing during running than TD (P ≤ .006). Only the ITT group showed significantly greater external hip rotation than TD. When compared to TD, the ITF and ITB group had a significantly lower hip abduction moment in stance during running, but not for walking (P ≤ .032). SIGNIFICANCE: Compensatory mechanisms in children with internal rotational deformities were mostly dependent on the location of rotational malalignment. All children with internal rotational malalignment had greater ankle dorsiflexion and greater step width during running. Especially in active patients, this greater ankle dorsiflexion during running may result in overuse of the ankle dorsiflexor muscles, while greater step width may have beneficial effects in normalizing knee adduction moments.

Successful treatment of valgus knee osteoarthritis involving external tibial torsion with a double level osteotomy: A case report.

INTRODUCTION: Abnormal torsion of the lower leg affects the alignment of the knee joint and foot, and causes impairment of both knee joint function and gait. We here present a successful adult case treated with a double level osteotomy at the distal femur and tibia. PRESENTATION OF CASE: A 59-year-old woman complained of right knee pain for three years and had a deformity of her right lower limb since childhood. An advanced right tibial external torsion deformity with valgus alignment was revealed. We performed a double level osteotomy to correct both the valgus knee osteoarthritis and the external tibial torsional deformity. At the 2 year follow-up, the patient could run without pain and sit normally. DISCUSSION: The indications for surgery for abnormal rotation in the lower extremity are also not clear. In addition, most prior surgical reports on torsional deformity of the lower leg have been on childhood cases. Surgical treatment of valgus knee osteoarthritis involving external tibial torsion in adult has been rarely reported. CONCLUSIONS: In our current report, we present an adult case of valgus knee osteoarthritis involving external tibial torsion that was successfully treated using a double level osteotomy. A longer follow-up is still needed however despite these positive outcomes. LEVEL OF EVIDENCE: Ⅴ.

Combined Correction of Tibial Torsion and Tibial Tuberosity-Trochlear Groove Distance by Supratuberositary Torsional Osteotomy of the Tibia.

BACKGROUND: Increased external tibial torsion and tibial tuberosity-trochlear groove distance (TTTG) affect patellofemoral instability and can be corrected by tibial rotational osteotomy and tibial tuberosity transfer. Thus far, less attention has been paid to the combined correction of tibial torsion and TTTG by supratuberositary osteotomy. PURPOSE: To quantify the effect of a supratuberositary torsional osteotomy on TTTG. STUDY DESIGN: Descriptive laboratory study. METHODS: Seven patients who underwent supratuberositary osteotomy to treat patellofemoral instability and an additional 13 patients with increased TTTG were included (N = 20). With 3-dimensional (3D) surface models, supratuberositary rotational osteotomies were simulated with predefined degrees of rotation. Concomitant 3D TTTG was measured by a novel and validated measurement method. In addition, all operated patients underwent 2-dimensional (2D) radiographic evaluation with pre- and postoperative computed tomography data. Absolute differences among simulated, predicted, and achieved postoperative corrections were compared. RESULTS: A total of 500 supratuberositary osteotomies were simulated. The linear regression estimate yielded a change of -0.68 mm (95% CI, -0.72 to -0.63; P < .0001) in 3D TTTG per degree of tibial rotation, and 2D and 3D TTTG measurements in the operated patients were comparable in pre- and postoperative measurements (preoperative, 19.8 ± 2.5 mm and 20.0 ± 2.4 mm; postoperative, 13.6 ± 3.8 mm and 14.6 ± 3.4 mm, respectively). Postoperative 2D TTTG deviated in absolute terms from predicted (regression) and simulated TTTG by 1.4 ± 1.0 mm and 1.5 ± 0.6 mm. Inter- and intrarater reliability (intraclass correlation coefficient) for radiological and simulated measurements ranged between 0.883 and 0.996 and were almost perfect. CONCLUSION: In supratuberositary osteotomy, TTTG changes by -0.68 mm per degree of internal tibial rotation. The absolute mean difference between postoperative predicted TTTG and 2D TTTG was only 1.4 mm. Thus, TTTG correction can be successfully predicted by the degree of tibial rotation. CLINICAL RELEVANCE: TTTG correction can be successfully predicted by the degree of tibial rotation. Therefore, in selected cases, tibial torsional deformity and TTTG can be corrected by 1 osteotomy. However, isolated rotations have been performed, and unintended translational movements during tibial rotation may alter the postoperative results.

Assessing distal radius malrotation following fracture using computed tomography.

HYPOTHESIS: When the distal fracture fragment in distal radius fractures displaces, it commonly rotates as well as shortens and angulates. AIM: The aim of this study was to assess the frequency and magnitude of malrotation of the distal fracture fragment using computed tomography (CT). METHODS: A retrospective radiological assessment of 85 CT scans of the distal radius, 35 following fracture and 50 normal radii, was carried out. We developed and applied a simple method for measuring rotation of the distal radius relative to the diaphysis using routine CT scans of the wrist. A Mann-Whitney analysis was used to identify differences in radial rotation between fractures and controls. Intra- and inter-observer reliability were analyzed using intra-class correlation coefficients (ICCs) and Bland-Altman plots. RESULTS: The articular surface of the distal radius is normally rotated in the long axis of the forearm relative to the diaphysis, either into pronation or into supination. The median radial rotation angle of controls was 1° pronation (range -15° to 4°) compared to 3° pronation (range -24° to 31°) in the fracture group. The absolute rotation angle was significantly greater in the fracture group (median 10°, range 0-31° vs. 3°, range 0-15°; p < 0.001) and outside the "normal range" of controls in 26 cases indicating that 75% had rotated appreciably following injury. Intra- and inter-observer reliability of measurements were good with ICCs of 0.99 and 0.98, respectively. CONCLUSIONS: Malrotation of the distal radius appears common following distal radius fracture. Malrotation of the distal fracture fragment has been shown to affect distal radio-ulnar joint function. Despite this, rotational deformity is rarely addressed in clinical practice as it is difficult to appreciate on simple radiographs. The simplified method described here is easy to use in routine clinical practice and also appears reliable. Measuring radial rotation may be an important consideration when planning both primary treatment and corrective osteotomy for patients with distal radial malunion.