Slow-release synthesis of Cu single-atom catalysts with the optimized geometric structure and density of state distribution for Fenton-like catalysis.

Single-atom Fenton-like catalysis has attracted significant attention, yet the quest for controllable synthesis of single-atom catalysts (SACs) with modulation of electron configuration is driven by the current disadvantages of poor activity, low selectivity, narrow pH range, and ambiguous structure-performance relationship. Herein, we devised an innovative strategy, the slow-release synthesis, to fabricate superior Cu SACs by facilitating the dynamic equilibrium between metal precursor supply and anchoring site formation. In this strategy, the dynamics of anchoring site formation, metal precursor release, and their binding reaction kinetics were regulated. Bolstered by harmoniously aligned dynamics, the selective and specific monatomic binding reactions were ensured to refine controllable SACs synthesis with well-defined structure-reactivity relationship. A copious quantity of monatomic dispersed metal became deposited on the C3N4/montmorillonite (MMT) interface and surface with accessible exposure due to the convenient mass transfer within ordered MMT. The slow-release effect facilitated the generation of targeted high-quality sites by equilibrating the supply and demand of the metal precursor and anchoring site and improved the utilization ratio of metal precursors. An excellent Fenton-like reactivity for contaminant degradation was achieved by the Cu1/C3N4/MMT with diminished toxic Cu liberation. Also, the selective ·OH-mediated reaction mechanism was elucidated. Our findings provide a strategy for regulating the intractable anchoring events and optimizing the microenvironment of the monatomic metal center to synthesize superior SACs.

Atomically Engineered Encapsulation of SnS2 Nanoribbons by Single-Walled Carbon Nanotubes for High-Efficiency Lithium Storage.

Rechargeable lithium-ion batteries are integral to contemporary energy storage, yet current anode material systems struggle to meet the increasing demand for extended range capabilities. This work introduces a novel composite anode material composed of one-dimensional 2H-phase tin disulfide (SnS2) nanoribbons enclosed within cavities of single-walled carbon nanotubes (SnS2@SWCNTs), achieved through precise atomic engineering. Employing aberration-corrected transmission electron microscopy, we precisely elucidated the crystal structure of SnS2 within the confines of the SWCNTs. This deliberate design effectively addresses the inherent limitations of SnS2 as a lithium-ion anode material, including its low electrical conductivity, considerable volume expansion effects, and unstable solid electrolyte interface membrane. Testing confirmed that SnS2 transforms into the Li5Sn2 alloy phase after full lithiation and back to SnS2 after delithiation, showing excellent reversibility. The composite also benefits from edge effects, improving lithium storage through stronger binding and lower migration barriers, which were supported by calculations. This pioneering work advances high-performance anode materials for applications.

Octylammonium Iodide Induced in-situ Healing Behavior at Perovskite / Carbon Interface: the "Slow-Release Effect" Caused by Carbon Black Adsorption.

"Perovskite / Carbon" interface has remained a key bottleneck for the hole-conductor-free perovskite solar cells based on carbon-electrode (CPSCs), due to problems like loose physics contact, defects, energy mismatch, poor chemical coupling, etc. A previous study shows that octylammonium iodide (OAI) blending in carbon paste induced a kind of "in-situ healing" effect for "perovskite / carbon" interface, and improved power conversion efficiency from ≈13% to >19%. Here the beneath mechanism is further explored by careful examination of the interaction between OAI molecule and carbon black (CB) nanoparticles. It comes to show that, the famous "CB adsorption" plays a key role during the "healing" processes. Due to CB adsorption behavior, the mass ratio between OAI and CB influences much on the healing effect. By suitably adjusting the mass ratio between OAI and CB, and increasing the light harvest of perovskite, an efficiency of 19.41% is achieved for the hole-conductor-free CPSCs. Device efficiency and the charge-extraction and recombination process are tracked with the storage period, continuous improvement appears for devices assembled by relatively higher CB mass. A kind of "slow-release effect" is revealed during the OAI-induced "in-situ healing" process, which is caused by the famous "CB adsorption" behavior.

A potential slow-release fertilizer based on biogas residue biochar: Nutrient release patterns and synergistic mechanism for improving soil fertility.

The large yield of anaerobic digestates and the suboptimal efficacy of nutrient slow-release severely limit its practical application. To address these issues, a new biochar based fertilizer (MAP@BRC) was developed using biogas residue biochar (BRC) to recover nitrogen and phosphorus from biogas slurry. The nutrient release patterns of MAP@BRC and mechanisms for enhancing soil fertility were studied, and it demonstrated excellent performance, with 59% total nitrogen and 50% total phosphorus nutrient release rates within 28 days. This was attributed to the coupling of the mechanism involving the dissolution of struvite skeletons and the release of biochar pores. Pot experiments showed that crop yield and water productivity were doubled in the MAP@BRC group compared with unfertilized planting. The application of MAP@BRC also improved soil nutrient levels, reduced soil acidification, increased microbial populations, and decreased soil heavy metal pollution risk. The key factors that contributed to the improvement in soil fertility by MAP@BRC were an increase in available nitrogen and the optimization of pH levels in the soil. Overall, MAP@BRC is a safe, slow-release fertilizer that exhibits biochar-fertilizer interactions and synergistic effects. This slow-release fertilizer was prepared by treating a phosphorus-rich biogas slurry with a nitrogen-rich biogas slurry, and it simultaneously addresses problems associated with livestock waste treatment and provides a promising strategy to promote zero-waste agriculture.

Effects of slow-release nitrogen and urea combined application on soil physicochemical properties and fungal community under total straw returning condition.

Under the system of full straw returning, the relationship between soil fungal community diversity and soil physiochemical properties, and the combined application of slow-release nitrogen and urea is unclear. To evaluate its effect and provide an effective strategy for sustainable agricultural production, a 2-year field positioning trial was conducted using maize as the research object. The experiment was designed with two factors: straw treatment(S) and nitrogen fertilizer treatment(N),Six experimental treatments were set up,S1N0,S1N1,S1N2,S1N3,S1N4,S0N2,respectively.Analysis of 54 soil samples revealed 15 fungal phyla and 49 fungal classes. The composition of fungal communities in each treatment was basically the same, but there were significant differences in species abundance. Under total straw returning conditions, the combined application of slow-release nitrogen fertilizer and normal nitrogen fertilizer significantly increased the relative abundance of Ascomycota. During the jointing stage, tasseling stage and maturity stage, S1N4, S1N3 and S1N2 increased by 25.76%, 22.97%, 20.74%; 25.11%, 30.02%, 23.64% and 22.47%, 28.14%, 22.71% respectively compared with S0N2.The relative abundance of Basidiomycota was significantly reduced. Alpha diversity analysis showed that the straw returning mode significantly increased the Shannon index and decreased the Simpson index, which was obvious in the jointing stage and tasseling stage. The principal coordinate analysis analysis results showed that the fungal communities formed different clusters in the horizontal and vertical directions at the three growth stages of corn jointing, tasseling and maturity. At the jointing stage and tasseling stage, the communities of the straw return treatment and the straw removal treatment were separated, and the community distribution of each treatment was not significantly different in the mature stage. Total straw returning combined with slow-release fertilizer significantly (P＜0.05) increased the soil organic carbon, nitrate nitrogen and ammonia nitrogen content in each growth period, and increased the soil total nitrogen and hydrolyzable nitrogen content (P＞0.05).After the straw was returned to the field, the combined application of slow-release nitrogen fertilizer and common urea had a significant impact on soil urease, catalase, and sucrase activities. Among them, the three enzyme activities were the highest in the S1N3 treatment at the jointing stage and maturity stage, and the S1N4 treatment at the tasseling stage had the highest enzyme activity. Fungal community composition is closely related to environmental factors. Soil organic carbon, urease and catalase are positively correlated with Ascomycota and negatively correlated with Basidiomycota.

Enhanced effects of slowly co-released TGF-ß3 and BMP-2 from biomimetic calcium phosphate-coated silk fibroin scaffolds in the repair of osteochondral defects.

Bioactive agents have demonstrated regenerative potential for cell-free bone tissue engineering. Nevertheless, certain challenges persist, including ineffective delivery methods and confined therapeutic potency. Here, we demonstrated that the biomimetic calcium phosphate coating system (BioCaP) could effectively uptake and slowly release the incorporated bioactive agents compared to the surface absorption system via osteoclast-mediated degradation of BioCaP coatings. The release kinetics were determined as a function of time. The release rate was stable without remarkable burst release during the first 1 day, followed by a sustained release from day 7 to day 19. Then, we developed the bi-functional BioCaP-coated silk fibroin scaffolds enabling the effective co-delivery of TGF-ß3 and BMP-2 (SFI-T/SFI-B) and the corresponding slow release of TGF-ß3 and BMP-2 exhibited superior potential in promoting chondrogenesis and osteogenesis without impairing cell vitality in vitro. The SFI-T/SFI-B scaffolds could improve cartilage and bone regeneration in 5 × 4 mm rabbit osteochondral (OC) defect. These findings indicate that the biomimetic calcium-phosphate coated silk fibroin scaffolds with slowly co-released TGF-ß3 and BMP-2 effectively promote the repair of OC defects, hence facilitating the future clinical translation of controlled drug delivery in tissue engineering.

Synergistic antifungal mechanism of cinnamaldehyde and nonanal against Aspergillus flavus and its application in food preservation.

Aspergillus flavus colonization on agricultural products during preharvest and postharvest results in tremendous economic losses. Inspired by the synergistic antifungal effects of essential oils, the aims of this study were to explore the mechanism of combined cinnamaldehyde and nonanal (SCAN) against A. flavus and to evaluate the antifungal activity of SCAN loading into diatomite (DM). Shriveled mycelia were observed by scanning electron microscopy, especially in the SCAN treatment group. Calcofluor white staining, transmission electron microscopy, dichloro-dihydro-fluorescein diacetate staining and the inhibition of key enzymes in tricarboxylic acid cycle indicated that the antifungal mechanism of SCAN against A. flavus was related to the cell wall damage, reactive oxygen species accumulation and energy metabolism interruption. RNA sequencing revealed that some genes involved in antioxidation were upregulated, whereas genes responsible for cell wall biosynthesis, oxidative stress, cell cycle and spore development were significantly downregulated, supporting the occurrence of cellular apoptosis. In addition, compared with the control group, conidia production in 1.5 mg/mL DM/cinnamaldehyde, DM/nonanal and DM/SCAN groups were decreased by 27.16%, 48.22% and 76.66%, respectively, and the aflatoxin B1 (AFB1) contents decreased by 2.00%, 73.02% and 84.15%, respectively. These finding suggest that DM/SCAN complex has potential uses in food preservation.

Ca-Mg modified attapulgite for phosphate removal and its potential as phosphate-based fertilizer.

The urgent concerns of controlling water body eutrophication and the alleviating phosphorus shortage have led to an urgent need for action. The removal of phosphate from polluted waters and its reuse are essential for the prevention of eutrophication and for the sustainable utilization of phosphate resources. In this study, modified attapulgite with different Ca:Mg molar ratios was synthesized to facilitate the recovery of phosphate, with subsequent use of soil fertilizer. Ca-Mg modified attapulgite with the optimal ratio (ACM-5:3) exhibited an exceptional adsorption quality, achieving a maximum adsorption capacity of 63.2 mg/g. The pseudo-second-order model and Langmuir model could well describe the adsorption kinetics and isotherms, respectively. The adsorption mechanism analyses suggested that the interaction between ACM-5:3 and phosphate depended mainly on ion exchange and electrostatic attraction. Moreover, phosphate-laden-ACM-5:3 demonstrated a significant potential as a phosphorus-releasing fertilizer. It could promote corn growth by ensuring a continuous supply of phosphorus and minimizing phosphorus runoff losses. The above results suggested that ACM-5:3 was a potential adsorbent for efficient phosphate removal and recovery.

Nanocellulose: Structure, modification, biodegradation and applications in agriculture as slow/controlled release fertilizer, superabsorbent, and crop protection: A review.

This review investigates the potential of nanocellulose in agriculture, encompassing its structure, synthesis, modification, and applications. Our investigation of the characteristics of nanocellulose includes a comprehensive classification of its structure. Various mechanical, chemical and enzymatic synthesis techniques are evaluated, each offering distinct possibilities. The central role of surface functionalization is thoroughly examined. In particular, we are evaluating the conventional production of nanocellulose, thus contributing to the novelty. This review is a pioneering effort to comprehensively explore the use of nanocellulose in slow and controlled release fertilizers, revolutionizing nutrient management and improving crop productivity with reduced environmental impact. Additionally, our work uniquely integrates diverse applications of nanocellulose in agriculture, ranging from slow-release fertilizers, superabsorbent cellulose hydrogels for drought stress mitigation, and long-lasting crop protection via nanocellulose-based seed coatings. The study ends by identifying challenges and unexplored opportunities in the use of nanocellulose in agriculture. This review makes an innovative contribution by being the first comprehensive study to examine the multiple applications of nanocellulose in agriculture, including slow-release and controlled-release fertilizers.

Preparation and Performance Verification of a Solid Slow-Release Carbon Source Material for Deep Nitrogen Removal in Urban Tailwater.

Urban tailwater typically has a low carbon-to-nitrogen ratio and adding external carbon sources can effectively improve the denitrification performance of wastewater. However, it is difficult to determine the dosage of additional carbon sources, leading to insufficient or excessive addition. Therefore, it is necessary to prepare solid slow-release carbon source (SRC) materials to solve the difficulty in determining the dosage of carbon sources. This study selected two SRCs of slow-release carbon source 1 (SRC1) and slow-release carbon source 2 (SRC2), with good slow-release performance after static carbon release and batch experiments. The composition of SRC1 was: hydroxypropyl methylcellulose/disodium fumarate/polyhydroxy alkanoate (HPMC/DF/PHA) at a ratio of 3:2:4, with an Fe3O4 mass fraction of 3%. The composition of SRC2 was: HPMC/DF/PHA with a ratio of 1:1:1 and an Fe3O4 mass fraction of 3%. The fitted equations of carbon release curves of SRC1 and SRC2 were y = 61.91 + 7190.24e-0.37t and y = 47.92 + 8770.42e-0.43t, respectively. The surfaces of SRC1 and SRC2 had a loose and porous morphological structure, which could increase the specific surface area of materials and be more conducive to the adhesion and metabolism of microorganisms. The experimental nitrogen removal by denitrification with SRCs showed that when the initial total nitrogen concentration was 40.00 mg/L, the nitrate nitrogen (NO3--N) concentrations of the SRC1 and SRC2 groups on the 10th day were 2.57 and 2.66 mg/L, respectively. On the 20th day, the NO3--N concentrations of the SRC1 and SRC2 groups were 1.67 and 2.16 mg/L, respectively, corresponding to removal efficiencies of 95.83% and 94.60%, respectively. The experimental results indicated that SRCs had a good nitrogen removal effect. Developing these kinds of materials can provide a feasible way to overcome the difficulty in determining the dosage of carbon sources in the process of heterotrophic denitrification.

Preparation and Application of Degradable Lignin/Poly (Vinyl Alcohol) Polymers as Urea Slow-Release Coating Materials.

The massive amount of water-soluble urea used leads to nutrient loss and environmental pollution in both water and soil. The aim of this study was to develop a novel lignin-based slow-release envelope material that has essential nitrogen and sulfur elements for plants. After the amination reaction with a hydrolysate of yak hair keratin, the coating formulation was obtained by adding different loadings (2, 5, 8, 14 wt%) of aminated lignin (AL) to 5% polyvinyl alcohol (PVA) solution. These formulations were cast into films and characterized for their structure, thermal stability, and mechanical and physicochemical properties. The results showed that the PVA-AL (8%) formulation had good physical and chemical properties in terms of water absorption and mechanical properties, and it showed good degradation in soil with 51% weight loss after 45 days. It is suitable for use as a coating material for fertilizers. Through high-pressure spraying technology, enveloped urea particles with a PVA-AL (8%) solution were obtained, which showed good morphology and slow-release performance. Compared with urea, the highest urea release was only 96.4% after 30 days, conforming to Higuchi model, Ritger-Peppas model, and second-order dynamic model. The continuous nitrogen supply of PVA-AL coated urea to Brassica napus was verified by potting experiments. Therefore, the lignin-based composite can be used as a coating material to produce a new slow-release nitrogen fertilizer for sustainable crop production.

Efficient Recovery of Phosphate from Water Media by Iron-Magnesium Functionalized Lignite: Adsorption Evaluation, Mechanism Revelation and Potential Application Exploration.

Selective phosphorus removal from aquatic media has become an ideal strategy to mitigate eutrophication and meet increasingly stringent discharge requirements. To achieve phosphorus control and resource utilization of low-calorific-value lignite, iron and magnesium salts were used to functionalize lignite, and iron-magnesium functionalized lignite (called IM@BC) was prepared for phosphate recovery from water media. The adsorption properties of IM@BC were systematically evaluated, especially the influence of ambient pH and co-existing ions. The kinetic, isothermal, and thermodynamic adsorption behaviors of IM@BC were analyzed. The adsorption mechanism was revealed by microscopic characterization. The potential application of phosphate-containing IM@BC (P-IM@BC) was explored. The results show that IM@BC has a strong phosphate adsorption capacity, and the maximum adsorption capacity is 226.22 mgP/g at pH = 3. Co-existing CO32- inhibits phosphate adsorption, while coexisting Ca2+ and Mg2+ enhance the effect. At the initial adsorption stage, the amount of phosphate adsorbed by IM@BC continues to increase, and the adsorption equilibrium state is gradually reached after 24 h. The adsorption process conforms to the pseudo-second-order kinetic model (PSO) and Langmuir isothermal adsorption model, and the adsorption process is mainly chemical adsorption. The phosphate absorption capacity is positively correlated with temperature (283.15 K~313.15 K), and the adsorption process is spontaneous, endothermic, and entropy-increasing. Its adsorption mechanism includes electrostatic attraction, ion exchange, surface precipitation, and coordination exchange. IM@BC can efficiently recover phosphate from actual phosphorus-containing wastewater with a recovery efficiency of up to 90%. P-IM@BC slowly releases phosphate from pH 3 to 11. Plant growth experiments showed that P-IM@BC could be used as a slow-release fertilizer to promote the root growth of cowpeas. The novelty of this work lies in the development of a highly efficient phosphate recovery adsorbent, which provides a feasible method of phosphorus control in water media and resource utilization of lignite.

Targeted local anesthesia: a novel slow-release Fe3O4-lidocaine-PLGA microsphere endowed with a magnetic targeting function.

PURPOSE: Lidocaine microspheres can prolong the analgesic time to 24-48 h, which still cannot meet the need of postoperative analgesia lasting more than 3 days. Therefore, we added Fe3O4 to the lidocaine microspheres and used an applied magnetic field to attract Fe3O4 to fix the microspheres around the target nerves, reducing the diffusion of magnetic lidocaine microspheres to the surrounding tissues and prolonging the analgesic time. METHODS: Fe3O4-lidocaine-PLGA microspheres were prepared by the complex-emulsion volatilization method to characterize and study the release properties in vitro. The neural anchoring properties and in vivo morphology of the drug were obtained by magnetic resonance imaging. The nerve blocking effect and analgesic effect of magnetic lidocaine microspheres were evaluated by animal experiments. RESULTS: The mean diameter of magnetically responsive lidocaine microspheres: 9.04 ± 3.23 µm. The encapsulation and drug loading of the microspheres were 46.18 ± 3.26% and 6.02 ± 1.87%, respectively. Magnetic resonance imaging showed good imaging of Fe3O4-Lidocain-PLGA microspheres, a drug-carrying model that slowed down the diffusion of the microspheres in the presence of an applied magnetic field. Animal experiments demonstrated that this preparation had a significantly prolonged nerve block, analgesic effect, and a nerve anchoring function. CONCLUSION: Magnetically responsive lidocaine microspheres can prolong analgesia by slowly releasing lidocaine, which can be immobilized around the nerve by a magnetic field on the body surface, avoiding premature diffusion of the microspheres to surrounding tissues and improving drug targeting.

The analysis of release and percolation rate of nutrients from regular and obsidian-based slow-release fertilizers.

Research on the observation of nutrient release rates from slow-release and regular fertilizers combined with the percolation rate in the soil is scarce. This work aims to observe potassium and phosphate release behavior from slow-release and regular fertilizer, followed by the percolation of that nutrient in the soil. The characteristics of the soil were analyzed using X-ray Diffraction (XRD), X-ray Fluorescence (XRF), and Scanning Electron Microscope (SEM). The concentration of potassium and phosphate in soil is analyzed using Atomic Absorption Spectroscopy (AAS) and Ultraviolet-Visible Spectroscopy (UV-Vis), respectively. The release rate of nutrients from slow-release fertilizer is 6 to 8 times slower than regular fertilizer. Meanwhile, the rate of nutrients released from slow-release and regular fertilizer followed by soil percolation matches the quadratic equation. Potassium adsorption on the soil surface is significantly higher than that of potassium. The negativity of soil polarity contributed to the high level of potassium adsorption on soil particle surfaces. The low phosphate adsorption capability of magnetite and the negativity of soil polarity contributed to the soil's low phosphate adsorption.

Biochar-based fertilizers from co-pyrolysis of algae and hazelnut shell with triple superphosphate: Physicochemical properties and slow release performance.

Phosphorus (P) is a vital nutrient for plant growth and food production. Excessive amounts of P fertilizers to a greater extent of crop P offtake are inevitably applied due to low utilization efficiency, causing environmental pollution. This study aimed to evaluate biochar-based fertilizers (BBFs) produced by co-pyrolyzing algae (A) and hazelnut shell (H) biomasses with triple superphosphate (TSP) at a ratio of 4:1 (w/w). The potential of the slow-release performance of BBFs was studied during kinetics experiments. The co-pyrolysis of biomasses with TSP yielded BBFs with significantly different properties, including electrical conductivity, pH, elemental ratios, functional groups, specific surface area and pore size characteristics. Phosphorus release from all biochars and BBFs followed the Elovich model, except for TSP and H+TSP. Kinetic studies revealed prolonged P-release times and slower release rates for BBFs compared to conventional TSP. So that, TSP released 100% of the total P, whereas H+TSP and A+TSP biochars released only 3.14% and 5.14% of the total P, respectively, during a 240-hour experiment. The slow-release performance of BBFs suggests their potential as promising alternatives to conventional phosphate fertilizers. BBFs have the potential to enhance P utilization efficiency, increase crop yield and mitigate the environmental impact of P fertilizer runoff.

Clinical Characteristics and Outcome of Immediate-Release Versus SLOW-Release Carvedilol in Heart Failure Patient (SLOW-HF): a Prospective Randomized, Open-Label, Multicenter Study.

PURPOSE: Carvedilol demonstrated therapeutic benefits in patients with heart failure and reduced ejection fraction (HFrEF). However, it had a short half-life time mandating twice a day administration. We investigated whether slow-release carvedilol (carvedilol-SR) is non-inferior to standard immediate-release carvedilol (carvedilol-IR) in terms of clinical efficacy in patients with HFrEF. METHODS: We randomly assigned patients with HFrEF to receive carvedilol-SR once a day or carvedilol-IR twice a day. The primary endpoint was the change in N-terminal pro B-natriuretic peptide (NT-proBNP) level from baseline to 6 months after randomization. The secondary outcomes were proportion of patients with NT-proBNP increment > 10% from baseline, mortality rate, readmission rate, changes in blood pressure, quality of life, and drug compliance. RESULTS: A total of 272 patients were randomized and treated (median follow-up time, 173 days). In each group of patients taking carvedilol-SR and those taking carvedilol-IR, clinical characteristics were well balanced. No patient died during follow-up, and there was no significant difference in the change of NT-proBNP level between two groups (-107.4 [-440.2-70.3] pg/mL vs. -91.2 [-504.1-37.4] pg/mL, p = 0.101). Change of systolic and diastolic blood pressure, control rate and response rate of blood pressure, readmission rate, and drug compliance rate were also similar. For safety outcomes, the occurrence of adverse reactions did not differ between carvedilol-SR group and carvedilol-IR group. CONCLUSION: Carvedilol-SR once a day was non-inferior to carvedilol-IR twice a day in patients with HFrEF. TRIAL REGISTRATION: ClinicalTrials.gov: NCT03209180 (registration date: July 6, 2017).

Composite film with adjustable number of layers for slow release of humic acid and soil remediation.

In this study, to improve the soil amendment performance of film materials, composite films with the adjustable number of layers and controlled slow-release time were prepared using sodium alginate (SA), chitosan (CS) and activated charcoal (AC) as raw materials. The prepared multilayer films exhibited a wide pH response range and excellent slow-release time. The cumulative release of humic acid (HA) increased from 19.87 ± 0.98% to 66.72 ± 1.06% with increasing the pH from 4.0 to 10.0 after 700 h of slow-release. In addition, after 50 d of remediation in red soil, plantation soil, and saline soil, the NH4+-N, Olsen-P, Olsen-K, and organic matter contents in the three soils were increased by 2.91-28.62 mg/kg, 46.97-70.43 mg/kg, 55.89-77.01 mg/kg, and 12.47-22.52 g/kg, respectively, and were able to provide sustained crop growth promotion effect. This study demonstrates the promising application of multilayer film in soil remediation and agricultural production.

Novel slow-release carbon source improves anodic denitrification and electricity generation efficiency in microbial fuel cells.

MFC anodic denitrification is more suitable for the coexistence of organic matter and nitrate in actual sewage, but the traditional carbon source has some problems such as high cost and difficulty of dosage control in MFC. Herein, corncob and polycaprolactone (PCL) were mechanically pulverized and mixed in the system of polyvinyl alcohol and sodium alginate, and cross-linked to prepare slow-release carbon source fillers (CPSP), which were added to the MFC anolyte to realize the coupling of solid-phase denitrification and anodic denitrification. Results showed the start-up period of MFC experimental group (MFC-C) with CPSP was slightly longer than the control group (MFC-0), but MFC-C's maximum output voltage (648.4 mV) and power density (2738 mW/m3) could be increased by 5% and 15% higher than that of MFC-0 (P < 0.05). The degradation process of MFC substrate in unit cycle was mainly divided into nitrogen removal stage (0-8 h) and electricity generation stage (8-48 h). The NO3--N and COD degradation and power generation kinetic processes of MFC conformed to the Han-Levenspiel model. Kinetics experiments showed CPSP can improve the affinity and tolerance of MFC to NO3--N, also it can alleviate the pressure of electron competition in anolyte and improve coulombic efficiency. In addition, microbial communities were significantly changed under the effect of CPSP (P < 0.001). Meanwhile, CPSP can promote the synthesis of denitrification functional genes. This study provides a new strategy to improve the performance of MFC by the addition of novel denitrification carbon source.

Enhanced selectivity and recovery of phosphate and nitrate ions onto coffee ground waste biochars via co-precipitation of Mg/Al layered double hydroxides: A potential slow-release fertilizer.

In this study, the feasibility of Mg/Al layered double hydroxides (LDH) functionalized coffee ground waste biochars (LDHMgAl@CWGB) as a potential adsorbent to selectively recover phosphate (PO43-) and nitrate (NO3-) ions in aqueous phases and their consecutive uses as a slow-release fertilizer for stimulating the plant growth were identified. The higher adsorption capacity of PO43- and NO3- ions by LDHMgAl@CWGB (PO43- = 6.98 mgP/g, NO3- = 2.82 mgN/g) compared with pristine coffee ground waste biochars (CWGB; PO43- = 0.19 mgP/g, NO3- = 0.32 mgN/g) was mainly due to the incorporation of Mg/Al mixed oxides and Cl contents. Chemisorption and intra-particle mainly controlled the adsorptive recovery of PO43- and NO3- ions by CWGB and LDHMgAl@CWGB in aqueous phases and their adsorption toward CWGB and LDHMgAl@CWGB proceeded endothermically and spontaneously. The changes in the major adsorption mechanisms of PO43- and NO3- ions from ligand exchange (CWGB) to electrostatic surface complexation and anion-exchange (LDHMgAl@CWGB) supported the conclusion that the alternation of the surface features through Mg/Al LDH functionalization might improve selectivity and adsorption capacity of PO43- and NO3- ions onto CWGB under the co-existence of Cl-, SO42-, and HCO3- ions. Since PO43-- and NO3--loaded LDHMgAl@CWGB exhibited much higher seed germination, root and shoot growth rates of garden cress seeds (Lepidium sativum L) than other liquid and solid matrices, including 5 mgP/L PO43- and 5 mgN/L NO3-, 10 mgP/L PO43- and 10 mgN/L NO3-, and LDHMgAl@CWGB, it can be postulated that PO43-- and NO3--loaded LDHMgAl@CWGB could be practically applicable to the agricultural field as a slow-release fertilizer to facilitate the seed germination, root and shoot growth of the plants.

A network meta-analysis of the impact of feed-grade and slow-release ureas on lactating dairy cattle.

A network meta-analysis was conducted to determine the effects of feeding feed-grade urea (FGU) or slow-release urea (SRU) as a replacement for true protein supplements (control; CTR) in high-producing dairy cattle diets. Research papers were selected (n = 44) from experiments published between 1971 and 2021 based on the following criteria: dairy breed, detailed description of the isonitrogenous diets fed, provision of FGU or SRU (or both), high-yielding cows (>25 kg/cow per day), and results that included at least milk yield and composition, but data on nutrient intake, digestibility, ruminal fermentation profile, and N utilization were also considered. Most studies compared only 2 treatments, and a network meta-analysis approach was adopted to compare the effects among CTR, FGU, and SRU. Data were analyzed using a generalized linear mixed model network meta-analysis. Forest plots of milk yield were used to visualize the estimated effect size of treatments. Cows included in the study produced 32.9 ± 5.7 L/d of milk, 3.46 ± 5.0% of fat, and 3.11 ± 0.2% of protein with an intake of 22.1 ± 3.45 kg of dry matter. Average diet composition was 1.65 ± 0.07 Mcal of net energy for lactation, 16.4 ± 1.45% CP, 30.8 ± 5.91% neutral detergent fiber, and 23.0 ± 4.62% starch. Average supply of FGU was 209 g/cow per day, whereas the average supply of SRU was 204 g/cow per day. With some exceptions, feeding FGU and SRU did not affect nutrient intake and digestibility, N utilization, and milk yield and composition. However, the FGU reduced the acetate proportion (61.6 vs. 59.7 mol/100 mol) and the SRU reduced the butyrate proportion (12.4 vs. 11.9 mol/100 mol) compared with CTR. Ruminal ammonia-N concentration increased from 8.47 to 11.5 and 9.3 mg/dL in CTR, FGU, and SRU, respectively. Urinary nitrogen excretion increased from 171 to 198 g/d in CTR versus the 2 urea treatments, respectively. The use of moderate doses of FGU in high-producing dairy cows may be justified based on its lower cost.