ABSTRACT
Aluminum (Al) placed in hot water (HW) at 90 °C is roughened due to its reaction with water, forming Al hydroxide and Al oxide, as well as releasing hydrogen gas. The roughened surface is thus hydrophilic and possesses a hugely increased surface area, which can be useful in applications requiring hydrophilicity and increased surface area, such as atmospheric moisture harvesting. On the other hand, when using HW to roughen specified areas of an Al substrate, ways to protect the other areas from HW attacks are necessary. We demonstrated that self-assembled monolayers (SAMs) of a fluorinated phosphonic acid (FPA, CF3(CF2)13(CH2)2P(=O)(OH)2) derivatized on the native oxide of an Al film protected the underneath metal substrate from HW attack. The intact wettability and surface morphology of FPA-derivatized Al subjected to HW treatment were examined using contact angle measurement, and scanning electron microscopy and atomic force microscopy, respectively. Moreover, the surface and interface chemistry of FPA-derivatized Al before and after HW treatment were investigated by time-of-flight secondary ion mass spectrometry (ToF-SIMS), verifying that the FPA SAMs were intact upon HW treatment. The ToF-SIMS results therefore explained, on the molecular level, why HW treatment did not affect the underneath Al at all. FPA derivatization is thus expected to be developed as a patterning method for the formation of hydrophilic and hydrophobic areas on Al when combined with HW treatment.
ABSTRACT
Time-of-flight secondary ion mass spectrometry (ToF-SIMS) is a versatile surface-sensitive technique for characterizing both hard and soft matter. Its chemical and molecular specificity, high spatial resolution, and superior sensitivity make it an ideal method for depth profiling polymeric systems, including those comprised of both inorganic and organic constituents (i.e., polymer nanocomposites, PNCs). To best utilize ToF-SIMS for characterizing PNCs, experimental conditions must be optimized to minimize challenges such as the matrix effect and charge accumulation. Toward that end, we have successfully used ToF-SIMS with a Xe+ focused ion beam to depth profile silica nanoparticles grafted with poly(methyl methacrylate) (PMMA-NP) in a poly(styrene-ran-acrylonitrile) matrix film by selecting conditions that address charge compensation and the primary incident beam angles. By tracking the sputtered Si+ species and fitting the resultant concentration profile, the diffusion coefficient of PMMA-NP was determined to be D = 2.4 × 10-14 cm2/s. This value of D lies between that measured using Rutherford backscattering spectrometry (6.4 × 10-14 cm2/s) and the value predicted by the Stokes-Einstein model (2.5 × 10-15 cm2/s). With carefully tuned experimental parameters, ToF-SIMS holds great potential for quantitatively characterizing the nanoparticles at the surfaces and interfaces within PNC materials as well as soft matter in general.
ABSTRACT
Time-of-flight secondary ion mass spectrometry is used to analyze solid-phase synthesis products in 60 µm spots of high-density peptide arrays. As a result, a table of specific fragments for the individual detection of amino acids and their side chain protecting groups within peptides is compiled. The specific signal of an amino acid increases linearly as its number increases in the immobilized peptide. Mass-to-charge ratio values are identified that can distinguish between isomers such as leucine and isoleucine. The accessibility of the N-terminus of polyalanine will be studied depending on the number of its residues. The examples provided in the study demonstrate the significant potential of time-of-flight secondary ion mass spectrometry for high-throughput screening of functional groups and their accessibility to chemical reactions occurring simultaneously in hundreds of thousands of microreactors on a single microscope slide.
Subject(s)
Solid-Phase Synthesis Techniques , Spectrometry, Mass, Secondary Ion , Peptides/chemistry , Amino Acids , LeucineABSTRACT
PURPOSE: Chlorhexidine digluconate (CHG) is a first-line antiseptic agent typically applied to the skin as a topical solution prior to surgery due to its efficacy and safety profile. However, the physiochemical properties of CHG limits its cutaneous permeation, preventing it from reaching potentially pathogenic bacteria residing within deeper skin layers. Thus, the utility of a solid oscillating microneedle system, Dermapen®, and a CHG-hydroxyethylcellulose (HEC) gel were investigated to improve the intradermal delivery of CHG. METHODS: Permeation of CHG from the commercial product, Hibiscrub®, and HEC-CHG gels (containing 1% or 4% CHG w/w) was assessed in intact skin, or skin that had been pre-treated with microneedles of different array numbers, using an Franz diffusion cells and Time-of-Flight Secondary Ion Mass Spectrometry (ToF-SIMS). RESULTS: Gels containing 1% and 4% CHG resulted in significantly increased depth permeation of CHG compared to Hibiscrub® (4% w/v CHG) when applied to microneedle pre-treated skin, with the effect being more significant with the higher array number. ToF-SIMS analysis indicated that the depth of dermal penetration achieved was sufficient to reach the skin strata that typically harbours pathogenic bacteria, which is currently inaccessible by Hibiscrub®, and showed potential lateral diffusion within the viable epidermis. CONCLUSIONS: This study indicates that HEC-CHG gels applied to microneedle pre-treated skin may be a viable strategy to improve the permeation CHG into the skin. Such enhanced intradermal delivery may be of significant clinical utility for improved skin antisepsis in those at risk of a skin or soft tissue infection following surgical intervention.
Subject(s)
Anti-Infective Agents, Local , Chlorhexidine , Anti-Infective Agents, Local/pharmacology , Bacteria , Chlorhexidine/analogs & derivatives , Chlorhexidine/pharmacology , Gels/pharmacology , Mass SpectrometryABSTRACT
Visceral pain (VP) is the organ-derived nociception in which increased inflammatory reaction and exaggerated activation of the central nucleus of the amygdala (CeA) may contribute to this deficiency. Considering the amygdala also serves as the integration center for olfaction, the present study aimed to determine whether olfactory stimulation (OS) would effectively depress over-activation and inflammatory reaction in CeA, and successfully relieve VP-induced abnormalities. Adult rats subjected to intraperitoneal injection of acetic acid inhaled lavender essential oil for 2 or 4 h. The potential benefits of OS were determined by measuring the pro-inflammatory cytokine level, intracellular potassium and the upstream small-conductance calcium-activated potassium (SK) channel expression, together with detecting the stress transmitters that participated in the modulation of CeA activity. Results indicated that in VP rats, strong potassium intensity, reduced SK channel protein level, and increased corticotropin-releasing factor, c-fos, and substance P immuno-reactivities were detected in CeA. Enhanced CeA activation corresponded well with increased inflammatory reaction and decreased locomotion, respectively. However, in rats subjected to VP and received OS, all above parameters were significantly returned to normal levels with higher change detected in treating OS of 4h. As OS successfully depresses inflammation and CeA over-activation, application of OS may serve as an alternative and effective strategy to efficiently relieve VP-induced deficiency.
Subject(s)
Visceral Pain , Rats , Animals , Visceral Pain/drug therapy , Smell , Corticotropin-Releasing Hormone , Potassium , PhenotypeABSTRACT
A nanocarrier was obtained by coating the natural clinoptilolite particle surface with a phosphatidylcholine layer. The shell effective size does not exceed the thickness of the phospholipid molecular layer, which was confirmed by UV spectrometry and molecular mass spectrometry. The hydrodynamic diameter of the formulated nanocarrier, which was determined by dynamic light scattering, is smaller than the clinoptilolite core size. This effect is assumed to be caused by the phospholipid shell, which reduces the aqueous medium friction. The nanosize of the formulated nanocarrier, the natural clinoptilolite core, and the phospholipid shell together allow a combination of fruitful features that can be used for the fabrication of multifunctional platforms for the delivery of biologically active substances, bioimaging, or as a basis for biosensors.
Subject(s)
Nanoparticles , Zeolites , Nanoparticles/chemistry , Phosphatidylcholines , Zeolites/chemistryABSTRACT
Hydrogen plays important roles in the on-surface synthesis of carbon-based materials in ultra-high vacuum. The complex interplay between hydrogen and surface-adsorbed polycyclic aromatic hydrocarbons (PAHs) is tracked by in situ time-of-flight secondary ion mass spectrometry (ToF-SIMS) combined with isotope labeling. In situ deuterium labeling of prototypical PAHs, coronene (CR) and 7-armchair graphene nanoribbons (GNRs), on Au(111) is achieved by annealing either in D2 gas or in the vapor of perdeuterio-acenaphthene. By following the mass spectra of in situ deuterated CR mixed with hydrogen-CR, it is demonstrated that PAHs adsorbed at hot Au(111) surfaces continuously exchange hydrogen atoms. Also, D2 present during the Ullmann coupling step leads to incorporation of deuterium and to shorter GNRs.
ABSTRACT
Basal cell carcinoma (BCC) is the most common cutaneous malignancy in humans. One of the most efficacious drugs used in the management of BCC is the immunomodulator, imiquimod. However, imiquimod has physiochemical properties that limit its permeation to reach deeper, nodular tumor lesions. The use of microneedles may overcome such limitations and promote intradermal drug delivery. The current work evaluates the effectiveness of using an oscillating microneedle device Dermapen either as a pre- or post-treatment with 5% w/w imiquimod cream application to deliver the drug into the dermis. The effectiveness of microneedles to enhance the permeation of imiquimod was evaluated ex vivo using a Franz cell setup. After a 24-h permeation experiment, sequential tape strips and vertical cross-sections of the porcine skin were collected and analyzed using time-of-flight secondary ion mass spectrometry (ToF-SIMS). In addition, respective Franz cell components were analyzed using high-performance liquid chromatography (HPLC). Analysis of porcine skin cross-sections demonstrated limited dermal permeation of 5% w/w imiquimod cream. Similarly, limited dermal permeation was also seen when 5% w/w imiquimod cream was applied to the skin that was pretreated with the Dermapen, this is known as poke-and-patch. In contrast, when the formulation was applied first to the skin prior to Dermapen application, this is known as patch-and-poke, we observed a significant increase in intradermal permeation of imiquimod. Such enhancement occurs immediately upon microneedle application, generating an intradermal depot that persists for up to 24 h. Intradermal colocalization of isostearic acid, an excipient in the cream, with imiquimod within microneedle channels was also demonstrated. However, such enhancement in intradermal delivery of imiquimod was not observed when the patch-and-poke strategy was used with a non-oscillating microneedle applicator, the Dermastamp. The current work highlights that using the patch-and-poke approach with an oscillating microneedle pen may be a viable approach to improve the current treatment in BCC patients who would prefer a less invasive intervention relative to surgery.
Subject(s)
Carcinoma, Basal Cell/drug therapy , Immunologic Factors/administration & dosage , Pharmaceutical Preparations/administration & dosage , Skin Neoplasms/drug therapy , Skin/drug effects , Administration, Cutaneous , Animals , Drug Delivery Systems/methods , Hydrophobic and Hydrophilic Interactions , Microinjections/methods , Needles , Skin Absorption/drug effects , SwineABSTRACT
Filamentous fungi are well-established production hosts that feature a strong interconnection between morphology, physiology, and productivity. For penicillin production in Penicillium chrysogenum, industrial processes frequently favor a pellet morphology comprising compact hyphal agglomerates. Inherently these tightly packed entanglements lead to inactive, degrading sections within the pellet's core because of limitations. Optimal process design requires detailed knowledge of the nature of the limitations and localization of productive zones in the biomass, which is generally obtainable through modeling and complex analytical methods such as oxygen microelectrode and histological investigations. Methods that combine physiological and morphological insight are crucial yet scarce for filamentous fungi. In this study, we used time-of-flight secondary ion mass spectrometry in combination with oxygen and glucose tracer substrates, requiring little effort for sample preparation and measurement. Our method is capable of analyzing oxygen and substrate uptake in various morphological structures by the use of 18O as a tracer. In parallel, we can assess productive biomass regions through identification of penicillin mass fragments to simultaneously study oxygen diffusion, substrate incorporation, and productive biomass sections.
Subject(s)
Penicillium chrysogenum/metabolism , Biomass , Fungi/growth & development , Fungi/metabolism , Glucose/metabolism , Oxygen/metabolism , Penicillins/metabolism , Penicillium chrysogenum/growth & development , Spectrometry, Mass, Secondary IonABSTRACT
Microvesicles (MVs) are found in several types of body fluids and are promising disease biomarkers and therapeutic targets. This study aimed to develop a novel biofunctionalized surface for binding plasma microvesicles (PMVs) based on a lab-on-a-chip (LOC) approach. A new lactadherin (LACT)-functionalized surface was prepared and examined for monitoring PMVs. Moreover, two different strategies of LACT immobilization on a silicon surface were applied to compare different LACT orientations. A higher PMV to LACT binding efficiency was observed for LACT bonded to an αvß3 integrin-functionalized surface compared with that for LACT directly bonded to a glutaraldehyde-modified surface. Effective binding of PMVs and its components for both LACT immobilization strategies was confirmed using spectral ellipsometry and time-of-flight secondary ion mass spectrometry methods. The proposed PMV capturing system can be used as a foundation to design novel point-of-care (POC) diagnostic devices to detect and characterize PMVs in clinical samples. Graphical Abstract.
Subject(s)
Cell-Derived Microparticles/chemistry , Point-of-Care Systems , Silicon/chemistry , Humans , Lab-On-A-Chip Devices , Microscopy, Atomic Force , Plasma/chemistry , Spectrometry, Mass, Secondary Ion , Surface PropertiesABSTRACT
The instrument COSIMA (COmetary Secondary Ion Mass Analyzer) onboard of the European Space Agency mission Rosetta collected and analyzed dust particles in the neighborhood of comet 67P/Churyumov-Gerasimenko. The chemical composition of the particle surfaces was characterized by time-of-flight secondary ion mass spectrometry. A set of 2213 spectra has been selected, and relative abundances for CH-containing positive ions as well as positive elemental ions define a set of multivariate data with nine variables. Evaluation by complementary chemometric techniques shows different compositions of sample groups collected during two periods of the mission. The first period was August to November 2014 (far from the Sun); the second period was January 2015 to February 2016 (nearer to the Sun). The applied data evaluation methods consider the compositional nature of the mass spectral data and comprise robust principal component analysis as well as classification with discriminant partial least squares regression, k-nearest neighbor search, and random forest decision trees. The results indicate a high importance of the relative abundances of the secondary ions C+ and Fe+ for the group separation and demonstrate an enhanced content of carbon-containing substances in samples collected in the period with smaller distances to the Sun.
ABSTRACT
Residual melanins have been detected in multimillion-year-old animal body fossils; however, confident identification and characterization of these natural pigments remain challenging due to loss of chemical signatures during diagenesis. Here, we simulate this post-burial process through artificial maturation experiments using three synthetic and one natural eumelanin exposed to mild (100 °C/100 bar) and harsh (250 °C/200 bar) environmental conditions, followed by chemical analysis employing alkaline hydrogen peroxide oxidation (AHPO) and time-of-flight secondary ion mass spectrometry (ToF-SIMS). Our results show that AHPO is sensitive to changes in the melanin molecular structure already during mild heat and pressure treatment (resulting, e.g., in increased C-C cross-linking), whereas harsh maturation leads to extensive loss of eumelanin-specific chemical markers. In contrast, negative-ion ToF-SIMS spectra are considerably less affected by mild maturation conditions, and eumelanin-specific features remain even after harsh treatment. Detailed analysis of ToF-SIMS spectra acquired prior to experimental treatment revealed significant differences between the investigated eumelanins. However, systematic spectral changes upon maturation reduced these dissimilarities, indicating that intense heat and pressure treatment leads to the formation of a common, partially degraded, eumelanin molecular structure. Our findings elucidate the complementary nature of AHPO and ToF-SIMS during chemical characterization of eumelanin traces in fossilized organismal remains.
Subject(s)
Biomarkers/analysis , Chromatography, High Pressure Liquid/methods , Fossils , Melanins/analysis , Melanins/chemistry , Peroxides/chemistry , Spectrometry, Mass, Secondary Ion/methods , Animals , Oxidation-Reduction , PigmentationABSTRACT
Time-of-flight secondary ion mass spectrometry (ToF-SIMS) has shown promising applications in single-cell analysis owing to its high spatial resolution molecular imaging capability. One of the main drawbacks hindering progress in this field is the relatively low ionization efficiency for biological systems. The complex chemical micro-environment in single cells typically causes severe matrix effects, leading to significant signal suppression of biomolecules. In this work, we investigated the signal enhancement effect of graphene quantum dots (GE QDs) in ToF-SIMS analysis. A × 160 magnification of ToF-SIMS signal for amiodarone casted on glass slide was observed by adding amino-functionalized GE QDs (amino-GE QDs), which was significantly higher than adding previously reported signal enhancement materials and hydroxyl group-functionalized GE QDs (hydroxyl-GE QDs). A possible mechanism for GE QD-induced signal enhancement was proposed. Further, effects of amino-GE QDs and hydroxyl-GE QDs on amiodarone-treated breast cancer cells were compared. A significant signal improvement for lipids and amiodarone was achieved using both types of GE QDs, especially for amino-GE QDs. In addition, ToF-SIMS chemical mapping of single cells with better quality was obtained after signal enhancement. Our strategy for effective ToF-SIMS signal enhancement holds great potential for further investigation of drug metabolism pathways and the interactions between the cell and micro-environment.
Subject(s)
Graphite/chemistry , Quantum Dots/chemistry , Single-Cell Analysis , Spectrometry, Mass, Secondary Ion/methods , Breast Neoplasms/pathology , Female , HumansABSTRACT
Suberin fatty acids were extracted from outer bark of Silver birch (Betula pendula Roth.) using an isopropanolic sodium hydroxide solution. Laboratory sheets composed of lignocellulosic fiber networks were prepared from unbleached and unrefined softwood kraft pulp and further impregnated with suberin fatty acid monomers and cured with maleic anhydride in ethanol solution. The treatment resulted in hydrophobic surfaces, in which the contact angles remained over 120 degrees during the entire measurement. The fiber network also retained its water vapor permeability and enhanced fiber-fiber bonding resulted in improved tensile strength of the sheets. Scanning electron microscopy (SEM) images revealed that the curing agent, together with suberin fatty acids, was evenly distributed on the fiber surfaces and smoothing occurred over the wrinkled microfibrillar structure. High concentrations of the curing agent resulted in globular structures containing betulinol derivates as revealed with time-of-flight secondary ion mass spectrometry (ToF-SIMS). Also, the larger amount of suberin fatty acid monomers slightly impaired the optical properties of sheets.
Subject(s)
Fatty Acids/chemistry , Lignin/chemistry , Lipids/chemistry , Betula/chemistry , Hydrophobic and Hydrophilic Interactions , Mass Spectrometry , Microscopy, Electron, Scanning , Plant Bark/chemistryABSTRACT
Understanding FA metabolism and lipid synthesis requires a lot of information about which FAs and lipids are formed within the cells. We focused on the use of deuterated substrates of 100 µM α-linolenic acid and linoleic acid to determine the relative amounts of their converted PUFAs and specific phospholipids that are incorporated into cell plasma membranes. Time-of-flight secondary ion mass spectrometry (TOF-SIMS) was used to image and analyze lipids in model cell membranes with and without FA treatment. Because of its high spatial resolution, TOF-SIMS can be used to simultaneously provide both chemical information and distribution of various molecules in the sample surface down to the subcellular scale. Data obtained from this analysis of isotopes in the cell samples were used to calculate the relative amounts of long-chain PUFAs and phospholipids from their precursors, α-linolenic acid and linoleic acid. Our results show that the FA treatments induced an increase in the amounts of α-linolenic acid and linoleic acid and their long-chain conversion products. Moreover, an enhanced level of phospholipid turnover of these FAs in lipids such as phosphatidylcholines, phosphatidylethanolamines, and phosphatidylinositols was also observed in the cell plasma membrane.
Subject(s)
Cell Membrane/metabolism , Fatty Acids, Omega-3/metabolism , Fatty Acids, Omega-6/metabolism , Linoleic Acid/metabolism , alpha-Linolenic Acid/metabolism , Animals , Deuterium/metabolism , PC12 Cells , Phosphatidylinositols/metabolism , Phospholipids/metabolism , RatsABSTRACT
Size-fractioned atmospheric aerosol particles were collected during a typical heavy air pollution event in Beijing. The organic and inorganic components on the surfaces of the samples were analyzed using time-of-flight secondary ion mass spectrometry (TOF-SIMS). The variation characteristics of the surface chemical composition and influencing factors were studied, and the possible sources of these chemical compositions were identified through principal component analysis. The results showed that inorganic components such as crustal elements and sulfate, and organic components such as aliphatic hydrocarbons and oxygen-containing organic groups were present. Some surface components, such as polycyclic aromatic hydrocarbons, heavy metals and fluorides may exert adverse effects on human health. The species and relative percentages of the chemical components varied with particle size, diurnal and pollution progress. During a heavy pollution event, the species and relative percentages of secondary components such as oxygen-containing organic groups and sulfurous compounds increased, indicating that particles aged during this event. The surface chemical composition of the aerosol particles was affected mainly by emissions from coal combustion and motor vehicles. In addition, air pollution, meteorological factors, and air mass transport also exerted a significant effect on the surface chemical composition of aerosol particles.
Subject(s)
Aerosols/analysis , Air Pollutants/analysis , Air Pollution/statistics & numerical data , Environmental Monitoring , Beijing , Particle Size , Particulate Matter/analysis , Polycyclic Aromatic Hydrocarbons/analysisABSTRACT
Fluid bed coating has been shown to be a suitable manufacturing technique to formulate poorly soluble drugs in glass solutions. Layering inert carriers with a drug-polymer mixture enables these beads to be immediately filled into capsules, thus avoiding additional, potentially destabilizing, downstream processing. In this study, fluid bed coating is proposed for the production of controlled release dosage forms of glass solutions by applying a second, rate controlling membrane on top of the glass solution. Adding a second coating layer adds to the physical and chemical complexity of the drug delivery system, so a thorough understanding of the physical structure and phase behavior of the different coating layers is needed. This study aimed to investigate the surface and cross-sectional characteristics (employing scanning electron microscopy (SEM) and time of flight secondary ion mass spectrometry (ToF-SIMS)) of an indomethacin-polyvinylpyrrolidone (PVP) glass solution, top-coated with a release rate controlling membrane consisting of either ethyl cellulose or Eudragit RL. The implications of the addition of a pore former (PVP) and the coating medium (ethanol or water) were also considered. In addition, polymer miscibility and the phase analysis of the underlying glass solution were investigated. Significant differences in surface and cross-sectional topography of the different rate controlling membranes or the way they are applied (solution vs dispersion) were observed. These observations can be linked to the polymer miscibility differences. The presence of PVP was observed in all rate controlling membranes, even if it is not part of the coating solution. This could be attributed to residual powder presence in the coating chamber. The distribution of PVP among the sample surfaces depends on the concentration and the rate controlling polymer used. Differences can again be linked to polymer miscibility. Finally, it was shown that the underlying glass solution layer remains amorphous after coating of the rate controlling membrane, whether formed from an ethanol solution or an aqueous dispersion.
Subject(s)
Delayed-Action Preparations/chemistry , Glass/chemistry , Indomethacin/chemistry , Membranes/chemistry , Pharmaceutical Solutions/chemistry , Capsules/chemistry , Cellulose/analogs & derivatives , Cellulose/chemistry , Chemistry, Pharmaceutical/methods , Cross-Sectional Studies , Excipients/chemistry , Polymers/chemistry , Powders/chemistry , Solubility , Technology, Pharmaceutical/methods , Water/chemistryABSTRACT
Among the various biomarkers that are used to diagnose or monitor disease, extracellular vesicles (EVs) represent one of the most promising targets in the development of new therapeutic strategies and the application of new diagnostic methods. The detection of circulating platelet-derived microvesicles (PMVs) is a considerable challenge for laboratory diagnostics, especially in the preliminary phase of a disease. In this study, we present a multistep approach to immobilizing and detecting PMVs in biological samples (microvesicles generated from activated platelets and human platelet-poor plasma) on functionalized silicon substrate. We describe the application of time-of-flight secondary ion mass spectrometry (TOF-SIMS) and spectroscopic ellipsometry methods to the detection of immobilized PMVs in the context of a novel imaging flow cytometry (ISX) technique and atomic force microscopy (AFM). This novel approach allowed us to confirm the presence of the abundant microvesicle phospholipids phosphatidylserine (PS) and phosphatidylethanolamine (PE) on a surface with immobilized PMVs. Phosphatidylcholine groups (C5H12N+; C5H15PNO4+) were also detected. Moreover, we were able to show that ellipsometry permitted the immobilization of PMVs on a functionalized surface to be evaluated. The sensitivity of the ISX technique depends on the size and refractive index of the analyzed microvesicles. Graphical abstract Human platelets activated with thrombin (in concentration 1IU/mL) generate population of PMVs (platelet derived microvesicles), which can be detected and enumerated with fluorescent-label method (imaging cytometry). Alternatively, PMVs can be immobilized on the modified silicon substrate which is functionalized with a specific IgM murine monoclonal antibody against human glycoprotein IIb/IIIa complex (PAC-1). Immobilized PMVs can be subjected to label-free analyses by means ellipsometry, atomic force microscopy (AFM) and time-of-flight secondary ion mass spectrometry (TOF-SIMS).
Subject(s)
Blood Platelets , Extracellular Vesicles/chemistry , Silicon/chemistry , Spectrum Analysis/methods , Flow Cytometry , Humans , Liposomes , Microscopy, Atomic Force , Surface PropertiesABSTRACT
Blood adsorption onto the inside surface of hollow fiber dialysis membranes was investigated by means of time-of-flight secondary ion mass spectrometry (TOF-SIMS) and near-field infrared microscopy (NFIR) in order to evaluate the biocompatibility and permeability of dialysis membranes. TOF-SIMS is useful for the imaging of particular molecules with a high spatial resolution of approximately 100 nm. In contrast, infrared spectra provide quantitative information and NFIR enables analysis with a high spatial resolution of less than 1 µm, which is close to the resolution of TOF-SIMS. A comparison was made of one of the most widely used dialysis membranes made of polysulfone (PSf), that has an asymmetric and inhomogeneous pore structure, and a newly developed asymmetric cellulose triacetate (ATA) membrane that also has an asymmetric pore structure, even though the conventional cellulose triacetate membrane has a symmetric and homogeneous pore structure. As a result, it was demonstrated that blood adsorption on the inside surface of the ATA membrane is more reduced than that on the PSf membrane. Graphical abstract Analysis of blood adsorption on inside surface of hollow fiber membrane.
Subject(s)
Biocompatible Materials/chemistry , Blood Chemical Analysis , Cellulose/analogs & derivatives , Membranes, Artificial , Polymers/chemistry , Renal Dialysis/instrumentation , Sulfones/chemistry , Adsorption , Blood , Cellulose/chemistry , Humans , Infrared Rays , Materials Testing/methods , Microscopy/methods , Permeability , Porosity , Spectrometry, Mass, Secondary Ion/methodsABSTRACT
Lipofuscin granules accumulate in the cells of retinal pigment epithelium with age, particularly in patients with hereditary diseases. These granules are heterogeneous, being composed of mixtures of proteins and lipids, including more than 21 different fluorescent compounds. Bisretinoids and their photo-oxidation and photodegradation products represent the main source of lipofuscin fluorescence and exhibit phototoxic properties. This study used time-of-flight secondary ion mass spectrometry (ToF-SIMS) with in-depth probing to assess the depth distribution of N-retinylidene-N-retinylethanolamine (A2E) and its singly and doubly oxidized forms (A2E-ox and A2E-2ox, respectively) within lipofuscin granules and in their surface layer (lipid membrane). ToF-SIMS showed that A2E and its oxidized forms were uniformly distributed throughout lipofuscin granules but were not present at the membrane surface layer. This finding is important for understanding the process involved in the formation of lipofuscin granules and in their toxicity.