Unveiling the antibacterial potential of anthocyanins - a comprehensive review on this natural plant extract.

With the gradual prohibition of antibiotic fungicides, it is of great significance to develop high-efficient, nontoxic and environmental-friendly antimicrobial agents. Anthocyanin is a natural plant polyphenol pigment which shows antibacterial, anti-inflammatory and antioxidant effects through inhibiting the synthesis of bacterial cell wall, interfering bacterial respiratory metabolism, and inducing bacterial autolysis. As a typical antibacterial agent, anthocyanins have been widely used in various fields, including biological pesticides or feed additives in agricultural production, anti-inflammatory and antibacterial wound dressings in medicine, etc. However, the structure of anthocyanins is unstable, which limits its practical application. In this article, the biological activity, antibacterial mechanism and stabilization strategy of anthocyanins as antibacterial agents were reviewed. The safety, application scope and methods of anthocyanins were discussed. In addition, the challenges and development prospects of anthocyanin extract antibacterial technology were also prospected. This will be the direction for researchers to further explore and better apply anthocyanins to practical production and application.

Enhanced solidification/stabilization (S/S) of fluoride in smelting solid waste-based phosphogypsum cemented paste backfill utilizing biochar: Mechanisms and performance assessment.

Phosphogypsum (PG) cemented paste backfill (CPB) is a primary non-hazardous method for treating PG. However, using traditional binders like cement increases global carbon emissions and mining operational costs while complicating the reduction of fluoride leaching risks. This study introduces a novel PG-based CPB treatment method using steel slag (SS) and ground granulated blast furnace slag (GGBFS) as binders, calcium oxide as an exciter, with biochar serving as a fluoride-fixing agent. We investigated the effect of biochar addition on the hydration and solidification/stabilization (S/S) of fluoride in SS and GGBFS-PG-based materials (SSPC). The results indicated that the optimal strength and performance for fluoride S/S were achieved with a biochar addition of 0.2 wt%. Compared to the control group without biochar, the strength increased by 54.3%, and F leaching decreased by 39.4% after 28 days of curing for SSPC. The addition of 0.2 wt% biochar facilitated heterogeneous nucleation and acted as a microfiller, enhancing SSPC's properties. However, excessive biochar reduced the compactness of SSPC. Additionally, the distribution of fluoride was strongly correlated with P, Ca, Fe, and Al, suggesting that fluoride S/S is linked to the formation of stable hydration products like fluorapatite, fluorite, and complexes such as [AlF6]3- and [FeF6]3-. These findings offer a promising approach for the safe treatment of PG and the beneficial reuse of solid waste from SS and GGBFS.

Leaching of phosphorus from phosphate tailings and extraction of calcium phosphates: Toward comprehensive utilization of tailing resources.

Phosphate tailing is an extremely fine by-product during phosphate ore flotation. Due to the large quantities and relatively higher P2O5 content, the phosphate tailings have been considered as a potential P resource, compared to other P-bearing wastes. Besides, phosphate tailings also contain a large amount of available components, such as Ca, Mg, and Si. To explore a low-cost and efficient process for the utilization of phosphate tailings, the hydrochloric acid leaching-precipitation method was employed to recover phosphorus. The P in phosphate tailings can be selectively dissolved into leaching liquor, followed by the precipitation of calcium phosphates from the leaching liquor through pH adjustment. The results showed that P was predominantly concentrated in fluorapatite and its dissolution ratio increased with the decrease in pH. At pH 1.0, the P dissolution efficiency from phosphate tailings reached 96.3%, along with the majority of Mg and Ca. However, Si was hardly dissolved. It demonstrated that almost all the fluorapatite and dolomite were dissolved while the quartz was difficult to dissolve. Dolomite was more preferentially dissolved than fluorapatite. Increasing temperature contributed to the dissolution of dolomite while suppressing fluorapatite dissolution. The residue containing 87.9% SiO2 (quartz) and only 0.25% P2O5 has the potential as a building material. As the pH increased to 7.0, the collected precipitate consisted of 34.18% P2O5 and 56.10% CaO, which can serve as a source of a slow-released phosphate fertilizer. The highly efficient utilization of phosphate tailings was achieved via this process.

Efficient removal of Cd2+ from aqueous solution with a novel composite of silicon supported nano iron/aluminum/magnesium (hydr)oxides prepared from biotite.

Taking low cost silicate minerals to develop efficient Cd2+ adsorption materials was favorable to the comprehensive utilization of minerals and remediation of environmental pollution. In this study, a composite of silicon supported nano iron/aluminum/magnesium (hydr)oxides was prepared with biotite by combining acid leaching and base precipitation process, which was used to remove Cd2+. Cd2+ adsorption behaviors were in accordance of pseudo-second order kinetic model and Langmuir model, and the obtained maximal Cd2+ adsorption capacity was 78.37 mg/g. Increasing pH and temperature could accelerate the removal of Cd2+. The activation energy was calculated as 66.05 kJ/mol, meaning that Cd2+ removal process was mainly depended on chemical adsorption. XRD and SEM results showed that this composite was a micro-nano structure of layered silica supported nano iron/aluminum/magnesium (hydr)oxides. Cd2+ removal mechanisms were consisted of surface complexation and ion exchange between Cd2+ and other metal ions, and the ion exchange interaction played the major role. These results indicated that a novel efficient utilization way for silicate minerals was developed.

Comprehensive Application Technology of Bauxite Residue Treatment in the Ecological Environment: A Review.

The emission of bauxite residue continues to grow with the increase of alumina production capacity, along with the large amounts of bauxite residue currently stored in stockpiles. The exposed problems of high yield, strong alkalinity, low comprehensive utilization rate, and threats to the ecological environment are becoming increasingly prominent. With the strict requirements of environmental protection, improving the comprehensive utilization rate of bauxite residue and bulk consumption of bauxite residue has become an urgent issue to be solved. A large number of researchers have conducted in-depth investigations into the application of bauxite residue over a wide range, and this paper summarizes its application in the environment in recent years, providing guidance for the high value and harmless application of bauxite residue, which can help reduce environmental pollution and human life and health hazards caused by bauxite residue.

A review of comprehensive utilization of red mud.

Red mud (RM) is a solid waste generated during the process of alumina production. RM has already posed a serious environmental threat with the development of the alumina refining industry. The comprehensive utilization of RM has attracted much attention due to its large-scale generation and harmful nature. This paper introduces the characteristics and state of RM and summarizes the relevant research on the comprehensive utilization of RM. The results show that comprehensive utilization of RM is mainly focused on the preparation of building materials, the extraction of valuable metals, catalyst synthesis and environmental protection. Besides, the article discusses the existing problems while utilizing RM. Prospects and suggestions for different utilization methods of RM are proposed.

Comprehensive Utilization of Marine Microalgae for Enhanced Co-Production of Multiple Compounds.

Marine microalgae are regarded as potential feedstock because of their multiple valuable compounds, including lipids, pigments, carbohydrates, and proteins. Some of these compounds exhibit attractive bioactivities, such as carotenoids, ω-3 polyunsaturated fatty acids, polysaccharides, and peptides. However, the production cost of bioactive compounds is quite high, due to the low contents in marine microalgae. Comprehensive utilization of marine microalgae for multiple compounds production instead of the sole product can be an efficient way to increase the economic feasibility of bioactive compounds production and improve the production efficiency. This paper discusses the metabolic network of marine microalgal compounds, and indicates their interaction in biosynthesis pathways. Furthermore, potential applications of co-production of multiple compounds under various cultivation conditions by shifting metabolic flux are discussed, and cultivation strategies based on environmental and/or nutrient conditions are proposed to improve the co-production. Moreover, biorefinery techniques for the integral use of microalgal biomass are summarized. These techniques include the co-extraction of multiple bioactive compounds from marine microalgae by conventional methods, super/subcritical fluids, and ionic liquids, as well as direct utilization and biochemical or thermochemical conversion of microalgal residues. Overall, this review sheds light on the potential of the comprehensive utilization of marine microalgae for improving bioeconomy in practical industrial application.

[General situation and comprehensive utilization of medicinal fungi resources in Heilongjiang province].

In order to develop and utilize the macrofungi in Heilongjiang province, numerous literatures have been investigated to make a comprehensive analysis of the number of known species of fungi in Heilongjiang province. There exists a total of 546 species of macrofungus in Heilongjiang province belonging to 53 families and 13 orders of 6 classes and 2 subdivisions. And its application value is classified, summarized and reviewed. Three hundred and twenty kinds of edible fungi, 214 species of fungi with medicinal value, medicinal value in the anti-cancer effects of 167 species of fungi, 141 wood rot fungi, 141 species of ectomycorrhizal fungi, 88 poisonous species, 67 macrofungus which are not clarified whether could be edible or toxic. It shows a broad prospects for development and utilization of macrofungus resources in Heilongjiang province.

Comprehensive utilization of the pyrolysis products from sewage sludge.

Bio-oils were produced from pyrolysis of sewage sludge in a horizontal tubular furnace under the anoxic or anaerobic conditions, by varying operating parameters and moisture content (MC) of the feedstock. Physicochemical properties of the obtained bio-oil (such as density, acid value, kinematical viscosity, high heating value and flash point) were analysed and compared with Chinese fuel standards. Tend, RT and ß were found critical to control the yield and physico-chemical properties of bio-oil products. The relative importance of various parameters such as Tend, RT, ß and MC was determined and the optimum values for the lowest kinematic viscosity and acid value and the highest yield of the bio-oil were achieved using the orthogonal matrix method. The parameters 550°C, 45 min, 5°C min(-1) and MC of 10% were found effective in producing the bio-oils with most of the desirable physico-chemical properties and yield. Benefit analysis was conducted to further optimize the operating parameters, considering pyrolysis treatment, comprehensive utilization of the pyrolysis products and final disposal of sewage sludge; the results showed the best economy of the pyrolysis parameters 450°C, 75 min, 3°C min(-1) and MC of 10%. The char obtained under this condition may serve as a microporous liquid adsorbent, while the bio-oil may serve as a low grade fuel oil after upgrading it with conventional fuel oil and deacidification. Pyrolysis products may become economically competitive in addition to being environment friendly.

A review of the botany, phytochemistry, pharmacology, synthetic biology and comprehensive utilization of Silybum marianum.

Silybum marianum (L.) Gaertn, a herbaceous plant with a long history in traditional medicine for the treatment of hepatobiliary diseases, particularly in Europe, which has attracted attention for its remarkable therapeutic effect. This review systematically summarizes the research progress in the botany, phytochemistry, pharmacology, comprehensive utilization and synthetic biology of S. marianum. Up to now, more than 20 types of flavonolignan components have been isolated from S. marianum. In addition, the rearch on fatty acids and triterpenoids is also constantly improving. Among them, silybin is the most active compound in flavonolignans components. Its pharmacological effects in vivo and in vitro include anti-inflammatory, antioxidant, anti-tumour, hypoglycaemic, neuroprotective and immunoregulatory properties. The use of coniferyl alcohol and taxifolin as substrates to produce silybin and isosilybin under the action of enzyme catalysis is the commonly used biosynthetic pathway of silymarin, which provides support for a comprehensive analysis of the synthetic pathway of silymarin. In addition to medicinal use, the extracts of plants also have broad application prospects in the production of food, healthcare products, cosmetics and other aspects. In addition, the chemical composition, pharmacological mechanism and synthetic biology of S. marianum need to be further studied, which is very important for its clinical efficacy and resource development.

Bauxite residue (red mud) treatment: Current situation and promising solution.

Bauxite residue, an industrial solid waste generated during alumina production, with over 80 % of bauxite residue worldwide being accumulated around alumina plants, which occupying a significant amount of land resources and posing a threat to the natural environment in the surrounding areas. This paper reviews recent advances in extracting valuable resources from bauxite residue, and its applications in building materials, environmental adsorbents, energy storage materials, and soil alkalinization. It also highlighted the main problem existing in these researches, which is the inability of the existing single processes to achieve the comprehensive utilization of various types of bauxite residue or maximize the utilization of bauxite residue components, resulting in a low comprehensive utilization rate and insignificant absorption effects of bauxite residue. To address these issues, we proposed a strategy of classifying and utilizing bauxite residue based on its components and establishing a multi-industry application system, involving sectors such as steel and building materials. This collaborative approach aims to handle various types of bauxite residue more effectively. Additionally, we suggest selecting suitable treatment methods based on the specific characteristics of bauxite residue and implementing measures to promote its comprehensive and large-scale utilization.

Multi-interface interaction mechanism of pulp reject-based flocculants for the removal of antibiotics and its combined pollutants.

The efficient removal of antibiotics and its combined pollutants is essential for aquatic environment and human health. In this study, a lignin-based organic flocculant named PRL-VAc-DMC was synthesized using pulp reject as the raw material, with vinyl acetate (VAc) and methacryloxyethyltrimethyl ammonium chloride (DMC) as the grafting monomers. A series of modern characterization methods were used to confirm the successful preparation of PRL-VAc-DMC and elucidate its polymerization mechanism. It was found that the Ph-OH group and its contiguous carbon atoms of lignin served as the primary active sites to react with grafting monomers. Flocculation experiments revealed that PRL-VAc-DMC could react with tetracycline (TC) through π-π* interaction, hydrophobic interaction, hydrogen bonding, and electrostatic attraction. With the coexistence of humic acid (HA) and Kaolin, the aromatic ring, hydroxyl, and amide group of TC could react with the benzene ring, hydroxyl group, and carboxyl group of HA, forming TC@HA@Kaolin complexes with Kaolin particles acting as the hydrophilic shell. The increase in particle size, electronegativity, and hydrophily of TC@HA@Kaolin complexes facilitated their interaction with PRL-VAc-DMC through strong interfacial interactions. Consequently, the presence of HA and Kaolin promoted the removal of TC. The synergistic removal mechanism of TC, HA, and Kaolin by PRL-VAc-DMC was systematically analyzed from the perspective of muti-interface interactions. This paper is of great significance for the comprehensive utilization of pulp reject and provides new insights into the flocculation mechanism at the molecular scale.

Upgrading dry acid pretreatment by post-hydrolysis for carbon efficient conversion of lignocellulose.

Dry acid pretreatment (DAP) as a promising process for industrial biorefinery provide an efficient bioconversion of cellulose without free wastewater, although the partial xylan and lignin degrade to inhibitors or recondense. A biorefinery strategy for carbon efficient conversion of lignocellulose into bioethanol, xylose, and reactive lignin was developed by upgrading DAP with post-hydrolysis. The results showed that lignocellulose after mild DAP (175 °C, acid dosage of 15 mg/g dry material) obtained higher xylan recovery and lower inhibitors than that of general DAP. Subsequently, post-hydrolysis, simultaneous saccharification and ethanol fermentation were performed at solids loading of 20 wt% without detoxification and sterilization, resulting in xylose and ethanol yield of 71.8 % and 67.6 %. The fractionated lignin presented more reactive ß-aryl ether linkages and less condensation than that from DAP. 66 % of lignocellulose carbon was recovered as ethanol, xylose and reactive lignin. This upgrading biorefinery strategy provided an easy-to-operate process for integrated utilization of lignocellulose.

Discovery of anomalous molybdenum enrichment in Ordovician and Silurian stone coal: Relevance, origin and recommendations.

Molybdenum (Mo) is a strategic element but has a notably low concentration at the Earth's surface. Consequently, competition for molybdenum resources at the national strategic level has begun to emerge, and in recent years, large-scale mining has led to the gradual depletion of molybdenum deposit resources. Here, thirty-four element enrichment patterns of Ordovician and Silurian stone coals in central China are reported. Molybdenum is the most enriched element, with an average of 208 mg/kg (58.2-440 mg/kg), which is 99 times the global hard coal average, and this molybdenum enrichment is associated with Ba-Ga-U-Cr-Na-K--Cu-Se-Zn enrichment and elevated SiO2, CaO, K2O, MgO, Na2O, MnO and P2O5 concentrations. These analyses reveal four stone coal samples with molybdenum concentrations of 260, 312, 403 and 440 mg/kg, which meet the grade for the molybdenum mineral exploitation formulated standard, indicating that the Ordovician and Silurian stone coal deposits should be considered promising alternative sources of molybdenum. The crude reserve estimate of molybdenum is approximately 29.2 × 104 tons. The anomalous molybdenum in the studied stone coal was sourced from a complex combination of hydrothermal fluids, original biomass and terrigenous materials. The unique paleogeographic location and geological structure in central China resulted in the anomalous molybdenum concentrations in the stone coal forming at that time, producing a unique type of coal-hosted molybdenum deposit. Future studies will consider the ecological effects of the molybdenum extraction mode and the cost savings effects of extracting molybdenum from stone coal. A comprehensive utilization plan is also needed. Next, a thorough study of molybdenum exploration related to black rock series must be performed to increase the total molybdenum resources and support Chinese international competitiveness.

A review on the P enrichment and recovery from steelmaking slag: Towards a sustainable P supply and comprehensive utilization of industrial solid wastes.

Phosphorus (P) is one of the desirable nutrient elements for the growing of crops and is a non-renewable resource. The over-exploitation of high-grade phosphate rocks makes finding alternative P sources urgent for a sustainable and stable P supply. Steelmaking slag has been considered a potential P source due to its huge production and the increasing P content in slag with the utilization of low-grade iron ores. If the efficient separation of P from steelmaking slag is achieved, the obtained P can be used as the raw material for phosphate products, and the P-removal steelmaking slag can be reused as a metallurgical flux in steel plants, realizing the comprehensive utilization of steelmaking slag. To better understand the separation method and mechanism of P from steelmaking slag, this paper reviews: (1) the enrichment mechanism of P in steelmaking slag, (2) the methods of the P-rich phase separation from slag and P recovery, and (3) facilitating the enrichment of P in the mineral phase by cooling treatment and modification. Furthermore, some industrial solid wastes were selected as modifiers for steelmaking slag, which not only provided several valuable components but also significantly reduced treatment costs. Hence, a collaborative processing of steelmaking slag and other P-bearing industrial solid wastes is proposed, providing a new solution for P recovery and the comprehensive utilization of industrial solid wastes, achieving the sustainable development of steel and phosphate industries.

A comprehensive review of goji berry processing and utilization.

Goji berry (wolfberry, Lycium), is a genus of Solanaceae, in which the roots, stems, leaves, and fruits are for both food and medicinal uses. In recent years, the demand for health food and research purposes has led to increasing attention being paid to the application of goji berry nutrients and resources. There are three general strategies to process and utilize the goji berry plant. First, the primary processing of goji berry products, such as dried goji berry pulp, and fruit wine with its by-products. Second, deep processing of sugar-peptides, carotenoids, and the extraction of other efficacy components with their by-products. Third, the utilization of plant-based by-products (roots, stems, leaves, flowers, and fruit residuals). However, the comprehensive use of goji berry is hampered by the non-standardized production technology of resource utilization and the absence of a multi-level co-production and processing technology systems. On the basis of this, we review some novel techniques that are made to more effectively use the resources found in goji berry or its by-products in order to serve as a guide for the thorough use of these resources and the high-quality growth of the goji berry processing industry.

Conversion of Dioscorea zingiberensis saponins to prosapogenin A by enzymatic hydrolysis.

Prosapogenin A is a secondary saponin in Dioscorea zingiberensis, and it showed remarkable pharmacological effects. Due to very low content and lack of well-developed biotransformation, its preparation was not efficient and clean. This study aims to establish an eco-friendly strategy for preparation of Prosapogenin A from plant material. Physical separation was employed to recycle starch and cellulose, and then D101 resin and polyamide packed-bed column was incorporated for purification of total steroidal saponins (TSS). After these pretreatments, purity of TSS was largely increased to 83.2% with recovery at 87.6%, which was subjected to enzymatic hydrolysis. Optimized reaction system was constructed in 0.20 M HAc-NaAc buffer (pH4.2) containing cellulase/TSS (3:1, w/w), and the hydrolysis was performed at 53 °C for 6 h. Consequently, TSS was almost completely hydrolyzed to Prosapogenin A, while the highest yield reached 5.62%. The newly proposed approach is promising for efficient preparation of Prosapogenin A in industrial applications.

Progress in comprehensive utilization of electrolytic manganese residue: a review.

Electrolytic manganese residue (EMR) is a solid waste produced in the process of electrolytic manganese metal (EMM) production. In recent years, the accumulation of EMR has caused increasingly serious environmental problems. To better understand the state of EMR recycling in recent years, this paper used a comprehensive literature database to conduct a statistical analysis of EMR-related publications from 2010 to 2022 from two perspectives: harmless green treatment and resource utilization. The results showed that the research on the comprehensive utilization of EMR mainly focused on the fields of chemical hazard-free treatment and manufacturing building materials. The related studies of EMR in the fields of biological harmlessness, applied electric field harmlessness, manganese series materials, adsorbents, geopolymers, glass-ceramics, catalysts, and agriculture were also reported. Finally, we put forward some suggestions to solve the EMR problem, hoping that this work could provide a reference for the clean disposal and efficient utilization of EMR.

[Research Progress on CO2 Capture, Utilization, and Storage of Fly Ash].

The research progress of different technologies of fly ash for CO2 capture, utilization, and storage at home and abroad was summarized, and the research opportunities were discussed. Fly ash could mineralize, capture, and store CO2 through direct dry, semi dry, wet, and indirect methods, reducing the leaching of heavy metals in fly ash while mineralizing CO2. The mineralized fly ash was more suitable for making concrete additives because it could effectively reduce the content of free CaO and MgO. Fly ash could also be made into activated carbon, zeolite, porous silica, and other products for physical adsorption and capture of CO2. The type of products depended mainly on the composition and physical/chemical properties of fly ash. In terms of CO2 utilization, fly ash could not only expand the utilization of building materials but also be made as catalysts or catalyst carriers required for various chemical processes of CO2 and new materials such as pseudo boehmite. The proposal of "double carbon" in China and the physical/chemical characteristics of fly ash from coal-fired power plants provide a new method for comprehensive utilization of fly ash.

Enabling efficient and economical degradation of PCDD/Fs in MSWIFA via catalysis and dechlorination effect of EMR in synergistic thermal treatment.

Catalytic thermal treatment is an efficient and low-energy consumption method for degrading polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs) in municipal solid waste incineration fly ash (MSWIFA). However, catalysts with high activity are expensive, difficult to separate and reuse from the treated MSWIFA, and they usually pose a risk of heavy metal pollution. Herein, a synergistic thermal treatment method of MSWIFA and electrolytic manganese residue (EMR) at relatively low temperatures was proposed after an in-depth analysis of their mineralogy composition to achieve detoxification of PCDD/Fs in MSWIFA. The mass and WHO-TEQ degradation efficiencies of PCDD/Fs significantly increased from -92.79% and -51.46%-98.57% and 96.10%, respectively, by the addition of electrolytic manganese residue (EMR) with an MSWIFA/EMR ratio of 3:7 in the thermal treatment of MSWIFA at 250 °C for 60 min. The WHO-TEQ concentration of PCDD/Fs in the treated sample decreased to 3.7 ng WHO-TEQ/kg, meeting the European end-of-waste criteria (20 ng WHO-TEQ/kg). The excellent degradation effect of EMR on PCDD/Fs in MSWIFA could be attributed to two aspects: 1) the manganese oxides in EMR has a catalytic effect on the degradation of PCDD/Fs; 2) the NH3 generated by the decomposition of (NH4)2SO4 in EMR is conducive to the degradation and resynthesis inhibition of PCDD/Fs. Besides, the thermodynamic calculations indicated that CaClOH in MSWIFA played a crucial role in the decomposition of (NH4)2SO4 in EMR. In addition, the degradation pathways and mechanisms of PCDD/Fs-homologues under the synergistic effect of manganese oxides, ammonia, and thermal field were investigated through comparative analysis of concentration and fingerprint of PCDD/Fs.