Concept and Design of a Multi-Polarization Reconfigurable Microstrip Antenna with Symmetrical Biasing Control.

Wireless communication systems have grown rapidly, moving towards being highly compact, intelligent, and flexible to adapt to changing operating requirements. Multifunctional and highly versatile antennas are key in this development to ensure system quality. Reconfigurable antennas, particularly regarding polarization, allow frequency reuse and enable the mitigation of fading effects. This work presents a square microstrip patch antenna operating in the ISM 5.8 GHz band with reconfigurable polarization by controlling its feeding. This antenna has four different states through the application of a symmetrical DC voltage that controls an RF circuit with PIN diodes. As a result, the microstrip patch can operate with three different polarizations: linear polarization and both circular polarizations (right-handed and left-handed). The antenna was fabricated to validate the proposed concept. The good agreement between the measurement and the simulation results was possible to observe regarding its polarization behaviour, impedance adaptation and radiation pattern.

A Novel Topology of a 3 × 3 Series Phased Array Antenna with Aperture-Coupled Feeding.

This paper presents a novel 3 × 3 phased array antenna optimized for 4 GHz operation, achieving a realized gain of 13.2 dBi and enabling 30-degree beam steering with a minimal capacitance variation of 1.5 pF. The design features a series aperture-coupled feeding mechanism that not only reduces the antenna's size but also simplifies the fabrication process, making the device both cost-effective and compact. Integrating cost-efficient quadrature-hybrid phase shifters and novel power splitters with cascaded quadrature hybrids ensures uniform power distribution and precise beam steering. The innovative use of these components addresses common challenges in phased array systems, such as space constraints, high costs, and complex power distribution.

Deeply Implanted Conformal Antenna for Real-Time Bio-Telemetry Applications.

The design and experimental verification of a deeply implanted conformal printed antenna is presented. The hip implant acts as the ground plane for a coaxial-cable-fed trapezoidal radiator designed to transmit biological signals collected within the body by proper biosensors. The arrangement, consisting of a metallic (or equivalent) hip implant, bio-compatible gypsum-based dielectric, and conformal radiator, was tested when the hosting 3D-printed plastic bone was immersed in tissue-like liquid contained in a plastic bucket. The dimensions of the set-up are similar to a human leg. Matching and radiation characteristics are presented in the industrial, scientific, and medical (ISM) frequency band (2.4-2.5 GHz), showing the feasibility of the proposed arrangement.

Microstrip Antenna Development for Radar Sensor.

Tank level measurement is an important research area in radar technology. Level measurement using radar technology is a safe solution even under extreme process conditions, such as high pressure, temperature, and vapors. Special antennas are required to meet electromagnetic requirements such as high gain, low sidelobe level, and high bandwidth. Another requirement is a small size and good manufacturability of the antenna. One promising solution is the use of microstrip antennas for tank-level measurements. This paper presents a special microstrip antenna, that meets the main requirements in addition to a circular antenna layout, which fills optimally the tank hatch. To do this, we created a special antenna layout with a suitable feeding network and added an optimized ring around the antenna system, which significantly reduces the sidelobe level. The center frequency of the antenna is 25 GHz with a 1 GHz bandwidth.

Triple-Band Notched Ultra-Wideband Microstrip MIMO Antenna with Bluetooth Band.

In this paper, a novel ultra-wideband UWB antenna element with triple-band notches is proposed. The proposed UWB radiator element operates from 2.03 GHz up to 15.04 GHz with triple rejected bands at the WiMAX band (3.28-3.8 GHz), WLAN band (5.05-5.9 GHz), and X-band (7.78-8.51 GHz). In addition, the radiator supports the Bluetooth band (2.4-2.483 GHz). Three different techniques were utilized to obtain the triple-band notches. An alpha-shaped coupled line with a stub-loaded resonator (SLR) band stop filter was inserted along the main feeding line before the radiator to obtain a WiMAX band notch characteristic. Two identical U-shaped slots were etched on the proposed UWB radiator to achieve WLAN band notch characteristics with a very high degree of selectivity. Two identical metallic frames of an octagon-shaped electromagnetic band gap structure (EBG) were placed along the main feeding line to achieve the notch characteristic with X-band satellite communication with high sharpness edges. A novel UWB multiple-input multiple-output (MIMO) radiator is proposed. The proposed UWB-MIMO radiator was fabricated on FR-4 substrate material and measured. The isolation between every two adjacent ports was below -20 dB over the FCC-UWB spectrum and the Bluetooth band for the four MIMO antennas. The envelope correlation coefficient (ECC) between the proposed antennas in MIMO does not exceed 0.05. The diversity gains (DG) for all the radiators are greater than 9.98 dB.

Design of Miniaturized Wideband Beam Deflection Conformal Array Antenna.

Antenna beam deflection, along with miniaturization and wideband of the antenna is in demand for practical applications. In this paper, a cylindrical conformal array antenna with a small-tilt forward beam was designed. The microstrip antenna unit was loaded with the artificial electromagnetic structure, which reduced the size of the antenna unit. As a result, the center spacing of the array elements can be shortened with the same array element spacing. The beam deflection angle can be increased in this way without increasing the coupling effect between the parts. Changing the number of line array elements and the number of line arrays can regulate the beam width of E-field and H-field, respectively. The bandwidth of the antenna can be significantly extended by slotting the ground plane. This work implemented a cylindrical conformal array of the antenna's forward beam with a small dip angle using a cylindrical carrier as an example. The measurement results showed that the angle between the main beam and the carrier axis of the conformal antenna was less than 30°, the bandwidth was more than 30%, and the antenna volume decreased by 40.4%.

A Compact Modified Two-Arm Rectangular Spiral Implantable Antenna Design for ISM Band Biosensing Applications.

This paper presents a new microstrip implantable antenna (MIA) design based on the two-arm rectangular spiral (TARS) element for ISM band (Industrial, Scientific, and Medical 2.4-2.48 GHz) biotelemetric sensing applications. In the antenna design, the radiating element consists of a two-arm rectangular spiral placed on a ground-supported dielectric layer with a permittivity of ϵr = 10.2 and a metallic line surrounding this spiral. Considering the practical implementation, in the proposed TARS-MIA, a superstrate of the same material is used to prevent contact between the tissue and the metallic radiator element. The TARS-MIA has a compact size of 10 × 10 × 2.56 mm3 and is excited by a 50 Ω coaxial feed line. The impedance bandwidth of the TARS-MIA is from 2.39 to 2.51 GHz considering a 50 Ω system, and has a directional radiation pattern with directivity of 3.18 dBi. Numerical analysis of the proposed microstrip antenna design is carried out in an environment with dielectric properties of rat skin (Cole-Cole model ϵf (ω), ρ = 1050 kg/m3) via CST Microwave Studio. The proposed TARS-MIA is fabricated using Rogers 3210 laminate with dielectric permittivity of ϵr = 10.2. The in vitro input reflection coefficient measurements are realized in a rat skin-mimicking liquid reported in the literature. It is observed that the in vitro measurement and simulation results are compatible, except for some inconsistencies due to manufacturing and material tolerances. The novelty of this paper is that the proposed antenna has a unique two-armed square spiral geometry along with a compact size. Moreover, an important contribution of the paper is the consideration of the radiation performance of the proposed antenna design in a realistic homogeneous 3D rat model. Ultimately, the proposed TARS-MIA may be a good alternative for ISM-band biosensing operations with its miniature size and acceptable radiation performance compared to its counterparts.

Single-Element and MIMO Circularly Polarized Microstrip Antennas with Negligible Back Radiation for 5G Mid-Band Handsets.

In this paper, single-element and MIMO microstrip antenna with two pairs of unequal slits is proposed as a circularly polarized antenna with negligible back radiation for 5G mid-band handsets. The unequal pairs of slits are engraved on the antenna patch to guarantee the presence of the circular polarization (CP). The proximity-coupled feeding technique is used to excite the proposed microstrip antenna in order to provide larger antenna -10 dB bandwidth which approaches 10.8% (3.48-3.87 GHz). A novel analysis technique is proposed in this paper that demonstrates the 3D axial ratio pattern in order to generate CP in the broadside direction without affecting the structure of the ground plane which ensures weak back radiation. The 3 dB axial ratio bandwidth (ARBW) is found to be equal to 4.1% extended along the range (3.58-3.73 GHz). To make the design more compatible with the 5G mid-band handsets, the 2 × 2 MIMO structure of the proposed antenna with reduced mutual coupling (less than -20 dB) is also presented in this work. The simulation and measured results are in good agreement, and both verify the CP characteristics and the weak back radiation of the proposed antenna.

Combined Antenna-Channel Modeling for the Harsh Horse Hoof Environment.

This paper describes the exploration of the combined antenna-channel model for a horse hoof. An antenna of 25 mm × 40 mm is designed in the ISM 868 MHz band. During the characterization and design of the antenna, the dynamic and harsh environment of the horse hoof is taken into account throughout every step of the procedure because it is impossible to de-embed the antenna from its environment. The antenna and channel model are verified extensively by measurements in phantom and ex vivo. The antenna is verified to be robust against changes in the morphology of the horse's hoof up to 50%. The dynamic environment was captured by considering different soil types and air, and the design was verified to be resilient against changes herein. The antenna performs well within the targeted band, with a fractional bandwidth of 8% and a gain of -2 dBi. Furthermore, a path loss model was constructed for a typical barn environment, and the antenna reaches a range of 250 m in the studied environment based on the LoRa technology. This research is important for monitoring horse health.

A Subtlety of Sizing the Inset Gap Width of a Microstrip Antenna When Built on an Ultra-Thin Substrate in the S-Band.

In this paper, Pyralux-a modern, ultra-thin, and acrylic-based laminate-was tested as a substrate of a microstrip antenna to examine the antenna characteristics when it is built on such a thin, flexible, and robust dielectric material, with the idea of eventually serving in wearable antennas in the context of smart-clothing applications. We particularly discuss the sensitivity of the design and fabrication of an inset-fed rectangular microstrip antenna (IRMA) in terms of its inset gap width when it is designed in the S-frequency band. The simulated and measured results showed a very small feasible range for the inset gap dimension with respect to the feed line width. Ultimately, an IRMA was successfully designed, fabricated, and tested with both SMA and U.FL connectors. The impedance bandwidth, in either case, was about 2%, the average value of directivity was 5.8 dB, and the realized efficiency was 2.67%, while the 3-dB beamwidths in the E-plane and the H-plane were 90° or wider.

A Metamaterial Inspired AMC Backed Dual Band Antenna for ISM and RFID Applications.

This work presents the design and fabrication of a metamaterial-based stimulated dual band antenna on FR4 material (dielectric constant 4.3) to operate in Industrial, Scientific and Medical (ISM) and Radio-frequency Identification (RFID) applications. The antenna model had an overall dimension of 70 × 31 × 1.6 mm3 with etched T-slots and L-slots for dual band resonance. The main objective of this work was to enhance the gain performance characteristic at the selected dual band frequencies of 0.915 GHz and 2.45 GHz. Initially, it achieved a narrow bandwidth of 0.018 GHz with a gain of 1.53 dBi at a lower frequency, and 0.13 GHz of bandwidth featuring 4.49 dBi of gain at a higher frequency. The antenna provided an impedance bandwidth of 2% (0.905-0.923 GHz) and 5% (2.382-2.516 GHz) at two resonating frequencies. The antenna was integrated with a designed novel AMC structure to enhance the gain in CST Microwave Studio software with the finite integration method. The characteristic features of the AMC unit cell were observed at 0.915 GHz and 2.45 GHz frequencies and after antenna integration, the final prototype achieved a gain of 2.87 dBi at 0.915 GHz and 6.8 dBi at 2.45 GHz frequencies.

Miniaturized Parasitic Loaded High-Isolation MIMO Antenna for 5G Applications.

In this paper, a multiple-input-multiple-output (MIMO) antenna is reported for 5G frequency range-2 (FR-2), 28 GHz bands. The MIMO antenna is developed in multiple iterations, including single-element design, cross-polarization reduction, and mutual coupling reduction. Initially, a single-element coplanar edge feed rectangular patch antenna is designed and the E-plane cross-polarization is reduced by -13 dB by trimming the forward corners of the patch. The ground plane is truncated to improve the -3 dB half-power-beamwidth (HPBW). A multi-wavelength spiral inspired parasitic surrounding the single element antenna is loaded, and performance analysis is performed. This parasitic element is used for self-field cancelation for the MIMO configuration. Two MIMO configurations, one with linear and the second with inverted elements, are developed and investigated. The first configuration is found to have better isolation of less than -25 dB compared to the -20 dB of the second configuration. Similarly, the gain of 4.8 dBi, the bandwidth of 3 GHz, envelope correlation coefficient (ECC) of 0.01, and diversity gain (DG) of 9.99 dB are superior to the second configuration. To validate the work, one of two MIMO configurations is fabricated and good agreement is found between simulation and measurement results.

Analysis Method of Bending Effect on Transmission Characteristics of Ultra-Low-Profile Rectangular Microstrip Antenna.

With the advent of wearable communication devices, microstrip antennas have developed multiple applications due to their ultra-low-profile properties. Therefore, it is essential to analyze the problem of frequency shift and impedance mismatch when the antenna is bent. For the case of a rectangular patch antenna E-plane bent on the cylindrical surface, (1) this paper introduces the effective dielectric constant into the cavity model, which can accurately predict the resonance frequency of the antenna, and (2) according to the equivalent circuit model of the antenna resonance mode, the lumped element parameters are calculated based on the above effective dielectric constant, so that impedance characteristics and the S-parameter matching the port can be quickly constructed. From the perspective of circuit frequency characteristics, it explains the change in the transmission performance of the curved antenna. The experimental results show that the maximum difference between the experimental and theoretical calculation frequencies is less than 1%. These results verify the validity and applicability of the theory in the analysis of ultra-low-profile patch antennas and wearable electronic communication devices. It provides a theoretical basis for the fast impedance matching of patch antennas under different working conditions.

Array Design of 300 GHz Dual-Band Microstrip Antenna Based on Dual-Surfaced Multiple Split-Ring Resonators.

To meet the increasing need of high-data-rate and broadband wireless communication systems, the devices and its circuits R&D under Millimeter, Sub-Millimeter, or even Terahertz (THz) frequency bands are attracting more and more attention from not only academic, but also industrial areas. Most of the former research on the THz waveband (0.1-10 THz) antenna design is mainly focused on realizing high directional gain, such as horn antennas, even though the coverage area is very limited when comparing with the current Wi-Fi system. One solution for the horizontally omnidirectional communication antenna is using the structure of multiple split-ring resonators (MSRRs). Aiming at this point, a novel 300 GHz microstrip antenna array based on the dual-surfaced multiple split-ring resonators (DSMSRRs) is proposed in this paper. By employing the two parallel microstrip transmission lines, different MSRRs are fed and connected on two surfaces of the PCB with a centrally symmetric way about them. The feeding port of the whole antenna is in between the centers of the two microstrip lines. Thus, this kind of structure is a so-called DSMSRR. Based on the different size of the MSRRs, different or multiple working wavebands can be achieved on the whole antenna. Firstly, in this paper, the quasi-static model is used to analyze the factors affecting the resonance frequency of MSRRs. Simulation and measured results demonstrate that the resonant frequency of the proposed array antenna is 300 GHz, which meets the design requirements of the expected frequency point and exhibits good radiation characteristics. Then, a dual-band antenna is designed on the above methods, and it is proved by simulation that the working frequency bands of the proposed dual-band antenna with reflection coefficient below -10 dB are 274.1-295.6 GHz and 306.3-313.4 GHz.

Compact Design of Annular-Microstrip-Fed mmW Antenna Arrays.

In this paper, a series of four novel microstrip antenna array designs based on different annular-microstrip feeding lines at 60-GHz millimeter wave (mmW) band are proposed, aiming at the potential usage of the mmW coverage antenna with multi-directional property. As the feeding network, the annular contour microstrip lines are employed to connect the patch units so as to form a more compact array. Our first design is to use an outer contour annular microstrip line to connect four-direction linear arrays composed of 1 × 3 rectangular patches, thus the gain of 8.4 dBi and bandwidth of over 300 MHz are obtained. Our second design is to apply the two-direction pitchfork-shaped array each made up of two same linear arrays as the above, therefore the gain of 9.65 dBi and bandwidth of around 250 MHz are achieved. Our third design is to employ dual (inner and outer contour) annular-microstrip feeding lines to interconnect the above four-direction linear arrays, while our fourth design is to bring bridged annular-microstrip feeding lines, both of which can realize the goal of multi-directional radiation characteristic and higher gain of over 10 dBi.

A 28-GHz Switched-Beam Antenna with Integrated Butler Matrix and Switch for 5G Applications.

This work presents a 28-GHz Butler matrix based switched-beam antenna for fifth-generation (5G) wireless applications. It integrates a 1 × 4 microstrip antenna, a 4 × 4 Butler matrix, and a single-pole four-throw (SP4T) absorptive switch in a single planar printed circuit board and is housed in a metal enclosure. Co-integration of a packaged switch chip with the Butler matrix based switched-beam antenna greatly enhances the form factor and integration level of the entire system. A wideband two-section branch line coupler is employed to minimize the phase and magnitude errors and variations of the Butler matrix. The aluminum metal enclosure stabilizes the electrical performances, reduces the sidelobes, and improves the structural stability. The fabricated antenna with the metal enclosure assembled has a dimension of 37 × 50 × 6.2 mm3. With an RF input signal fed to the antenna's input port through a single Ka-band connector, and the switching states chosen by 2-bit dc control voltages, the antenna successfully demonstrates four directional switched beams. The beam switching operations are verified through the over-the-air far-field measurements. The measured results show that the four beam steering directions are -43°, -17°, +10°, +34° with side lobe levels < -5.3 dB at 28 GHz. The antenna also shows reasonably wideband radiation patterns over 27-29 GHz band. The 10-dB impedance bandwidth is 25.4-27.6 GHz, while a slightly relaxed 8-dB bandwidth is 25.2-29.6 GHz. Compared to previous works, this four-directional switched-beam antenna successfully exhibits the advantages of high integration level and satisfactory performances for the 28-GHz 5G wireless applications.

Circularly Polarized Hybrid Dielectric Resonator Antennas: A Brief Review and Perspective Analysis.

Recently, it has been a feasible approach to build an antenna, in view of the potential advantages they offer. One of the recent trends in dielectric resonator antenna research is the use of compound and hybrid structures. Several considerable investigations have been already underway showing quite interesting and significant features in bandwidth, gain, and generation of circular polarization. A critical review on a journey of circularly polarized hybrid dielectric resonator antennas is presented in this article. A general discussion of circular polarization and DR antennas are provided at the forefront. Evolution, significant challenges, and future aspects with new ideas in designing hybrid dielectric resonator antennas are indicated at the end of the review. State-of-the-art advances and associated design challenges of circularly polarized hybrid DR antennas and related empirical formulas used to find resonance frequency of different hybrid modes produced are discussed in this paper.

Alternative Formulation of Antenna Arrays for DF Systems Considering Active-Element Patterns and Scattering Matrices.

Direction finding (DF) systems are used to determine the direction-of-arrival (DoA) of electromagnetic waves, thus allowing for the tracking of RF sources. In this paper, we present an alternative formulation of antenna arrays for modeling DF systems. To improve the accuracy of the data provided by the DF systems, the effects of mutual coupling in the array, polarization of the received waves, and impedance mismatches in the RF front-end receiver are all taken into account in the steering vectors of the DoA algorithms. A closed-form expression, which uses scattering parameter data and active-element patterns, is derived to compute the receiver output voltages. Special attention is given to the analysis of wave polarization relative to the DF system orientation. Applying the formulation introduced here, a complete characterization of the received waves is accomplished without the need for system calibration techniques. The validation of the proposed model is carried out by measurements of a 2.2 GHz DF system running a MUSIC algorithm. Tests are performed with a linear array of printed monopoles and with a planar microstrip antenna array having polarization diversity. The experimental results show DoA estimation errors below 6° and correct classification of the polarization of incoming waves, confirming the good performance of the developed formulation.

Reconfigurable Diplexer-Based Filtenna for Tx/Rx Operation in Mobile Satellite Terminals.

Large constellations of low-orbit satellites have already been launched with the aim of offering complete worldwide coverage of broadband Internet; however, compact, simple, and low-cost mobile terminals are necessary to establish the communication. This paper describes the design of a reconfigurable and compact filtenna with the ability to switch between the satellites' uplink and downlink frequencies, 20 GHz and 29 GHz, maintaining an excellent performance. Due to its simplicity, efficiency, and Rx/Tx isolation, this antenna is a relevant candidate to be part of mobile terminals and devices, or even sensors, that communicate with satellites.

A New Planar Microwave Sensor for Building Materials Complex Permittivity Characterization.

A new microwave sensor is proposed to characterize the complex relative permittivity of building non-magnetic materials and used in the characterization of three concrete samples. The proposed sensor structure consists of a log-periodic planar antenna with microstrip elements tilted forward by an angle ß and printed, alternately, on the top and bottom sides of a dielectric layer. The operation principle is based on the measurement of the scattering parameters S11 and S21 in a free space propagation transmitter-receiver setup, for both cases with the material under test (MUT) sample (non-line-of-sight, NLOS) and without it (line-of-sight, LOS). A prototype is fabricated and measured to determine the scattering parameters of concrete samples. After measurements, the obtained results are used in the efficient and accurate Nicolson-Ross-Weir (NRW) method, making it possible to estimate the values of the complex relative permittivity of the concrete blocks. The sensor design is demonstrated from initial simulations to measurements for validation of the developed prototype. The obtained results for the complex relative permittivity of concrete are in agreement with those available in the literature and the difference between the simulated and measurement results for the sensor antenna resonant frequency is 4.71%. The used measurement setup can be applied to characterize different types of solid or liquid dielectric materials.