Ruddlesden-Popper Perovskite Nanocrystals as Interface Modification Layer for Efficient Perovskite Solar Cells.

Perovskite nanocrystals are advantageous for interfacial passivation of perovskite solar cells (PSCs), but the insulating long alkyl chain surface ligands impede the charge transfer, while the conventional ligand exchange would possibly introduce surface defects to the nanocrystals. In this work, we reported novel in situ modification of CsPbBr3 nanocrystals using a short chain conjugated molecule 2-methoxyphenylethylammonium iodide (2-MeO-PEAI) for interfacial passivation of PSCs. Transmission electron microscopy studies with atomic resolution unveil the transformation from cubic CsPbBr3 to Ruddlesden-Popper phase (RPP) nanocrystals due to halogen exchange. Synergic passivation by the RPP nanocrystals and 2-MeO-PEA+ has led to suppressed interface defects and enhanced charge carrier transport. Consequently, PSCs with in situ modified RPP nanocrystals achieved a champion power conversion efficiency of 24.39%, along with an improvement in stability. This work brings insights into the microstructural evolution of perovskite nanocrystals, providing a novel and feasible approach for interfacial passivation of PSCs.

Perovskite Quantum Dots Lasing in Double-Heterostructure through Energy Transfer.

Planar double heterostructures were initially investigated and have been successfully applied in III-V semiconductor lasers due to their excellent roles in confining both the photons and carriers. Here, we design and fabricate a (PEA)2Csn-1PbnX3n+1 (quasi-2D)/CsPbBr3 QD/quasi-2D double-heterostructure sandwiched in a 3/2 λ DBR microcavity, and then demonstrate a single-mode pure-green lasing with a threshold of 53.7 µJ/cm2 under nanosecond-pulsed optical pumping. The thresholds of these heterostructure devices decrease statistically by about 50% compared to the control group with no energy donor layers, PMMA/QD/PMMA in an identical microcavity. We show that there is efficient energy transfer from the barrier regions of the quasi-2D phases to the QD layer by transient absorption and luminescence lifetime spectra and that such energy transfer leads to marked threshold reduction. This work indicates that the double-heterostructure configurations should play a significant role in the future perovskite electrically pumped laser.

Large-Area Perovskite Nanocrystal Metasurfaces for Direction-Tunable Lasing.

Perovskite nanocrystals (PNCs) are attractive emissive materials for developing compact lasers. However, manipulation of PNC laser directionality has been difficult, which limits their usage in photonic devices that require on-demand tunability. Here we demonstrate PNC metasurface lasers with engineered emission angles. We fabricated millimeter-scale CsPbBr3 PNC metasurfaces using an all-solution-processing technique based on soft nanoimprinting lithography. By designing band-edge photonic modes at the high-symmetry X point of the reciprocal lattice, we achieved four linearly polarized lasing beams along a polar angle of ∼30° under optical pumping. The device architecture further allows tuning of the lasing emission angles to 0° and ∼50°, respectively, by adjusting the PNC thickness to shift other high-symmetry points (Γ and M) to the PNC emission wavelength range. Our laser design strategies offer prospects for applications in directional optical antennas and detectors, 3D laser projection displays, and multichannel visible light communication.

Scintillation Properties of CsPbBr3 Nanocrystals Prepared by Ligand-Assisted Reprecipitation and Dual Effect of Polyacrylate Encapsulation toward Scalable Ultrafast Radiation Detectors.

Lead halide perovskite nanocrystals (LHP-NCs) embedded in polymeric hosts are gaining attention as scalable and low-cost scintillation detectors for technologically relevant applications. Despite rapid progress, little is currently known about the scintillation properties and stability of LHP-NCs prepared by the ligand assisted reprecipitation (LARP) method, which allows mass scalability at room temperature unmatched by any other type of nanostructure, and the implications of incorporating LHP-NCs into polyacrylate hosts are still largely debated. Here, we show that LARP-synthesized CsPbBr3 NCs are comparable to particles from hot-injection routes and unravel the dual effect of polyacrylate incorporation, where the partial degradation of LHP-NCs luminescence is counterbalanced by the passivation of electron-poor defects by the host acrylic groups. Experiments on NCs with tailored surface defects show that the balance between such antithetical effects of polymer embedding is determined by the surface defect density of the NCs and provide guidelines for further material optimization.

Modulation of Nucleation and Growth Kinetics of Perovskite Nanocrystals Enables Efficient and Spectrally Stable Pure-Red Light-Emitting Diodes.

Perovskite light-emitting diodes (PeLEDs) based on CsPb(Br/I)3 nanocrystals (NCs) usually suffer from severe spectral instability under operating voltage due to the poor-quality PeNCs. Herein, zeolite was utilized to prepare high-quality CsPb(Br/I)3 NCs via promoting the homogeneous nucleation and growth and suppressing the Ostwald ripening of PeNCs. In addition, the decomposed zeolite interacted strongly with PeNCs through Pb-O bonds and hydrogen bonds, which inhibited the formation of defects and suppressed halide ion migration, leading to an improved photoluminescence quantum yield (PLQY) and enhanced stability of PeNCs. Moreover, the strong binding affinity of decomposed zeolite to PeNCs contributed to the formation of homogeneous perovskite films with high PLQY. As a result, pure-red PeLEDs with Commission International de I'Eclairage (CIE) coordinates of (0.705, 0.291) were fabricated, approaching the Rec. 2020 red primary color. The devices achieved a peak external quantum efficiency of 23.0% and outstanding spectral stability.

Epitaxial Heterostructures of CsPbBr3 Perovskite Nanocrystals with Post-transition Metal Bismuth.

The facet chemistry of halide perovskite nanocrystals plays a key role in designing nanoscale epitaxial heterostructures. However, despite significant successes achieved in designing these nanocrystals, their heterostructures with several leading transition metals could not be established yet. Herein, the possible heterostructures of metals beyond transition metals are explored and the epitaxial combinations of soft CsPbBr3 nanocrystals with the post-transition metal Bi(0) are reported. These heterostructures are built with interfacing facets having hexagonal atomic configurations of both the rhombicuboctahedron CsPbBr3 and octahedral Bi(0). A high reaction temperature and the presence of alkylamine kept Bi(III) in reduced form and helped in sustaining these CsPbBr3-Bi(0) heteronanocrystals. Since understanding of and synthesis optimization of metal-halide perovskite heterostructures are limited, this finding adds a new fundamental insight in designing ionic and nonionic materials heterojunctions. Furthermore, oxidation and sulfidation of Bi(0) are studied, and the possible oxide/sulfide heterostructures with CsPbBr3 are discussed.

Observation of Three-Photon Cascaded Emission from Triexcitons in Giant CsPbBr3 Quantum Dots at Room Temperature.

Colloidal semiconductor nanocrystals have long been considered a promising source of time-correlated and entangled photons via the cascaded emission of multiexcitonic states. The spectroscopy of such cascaded emission, however, is hindered by efficient nonradiative Auger-Meitner decay, rendering multiexcitonic states nonemissive. Here we present room-temperature heralded spectroscopy of three-photon cascades from triexcitons in giant CsPbBr3 nanocrystals. We show that this system exhibits second- and third-order correlation function values, g(2)(0) and g(3)(0,0), close to unity, identifying very weak binding of both biexcitons and triexcitons. Combining fluorescence lifetime analysis, photon statistics, and spectroscopy, we can readily identify emission from higher multiexcitonic states. We use this to verify emission from a single emitter despite high emission quantum yields of multiply excited states and comparable emission lifetimes of singly and multiply excited states. Finally, we present potential pathways toward control of the photon number statistics of multiexcitonic emission cascades.

Trap-Mediated Sensitization Governs Near-Infrared Emission from Yb3+-Doped Mixed-Halide CsPbClxBr3-x Perovskite Nanocrystals.

Understanding the photosensitization mechanisms in Yb3+-doped perovskite nanocrystals is crucial for developing their anticipated photonic applications. Here, we address this question by investigating near-infrared photoluminescence of Yb3+-doped mixed-halide CsPbClxBr3-x nanocrystals as a function of temperature and revealing its strong dependence on the stoichiometry of the host perovskite matrix. To explain the observed experimental trends, we developed a theoretical model in which energy transfer from the perovskite matrix to Yb3+ ions occurs through intermediate trap states situated beneath the conduction band of the host. The developed model provides an excellent agreement with experimental results and is further validated through the measurements of emission saturation at high excitation powers and near-infrared photoluminescence quantum yield as a function of the anion composition. Our findings establish trap-mediated energy transfer as a dominant photosensitization mechanism in Yb3+-doped CsPbClxBr3-x nanocrystals and open up new ways of engineering their optical properties for light-emitting and light-harvesting applications.

Facet Dependent Photoluminescence Blinking from Perovskite Nanocrystals.

Photoluminescence (PL) blinking of nanoparticles, while detrimental to their imaging applications, may benefit next-generation displays if the blinking is precisely controlled by reversible electron/hole injections from an external source. Considerable efforts are made to create well-characterized charged excitons within nanoparticles through electrochemical charging, which has led to enhanced control over PL-blinking in numerous instances. Manipulating the photocharging/discharging rates in nanoparticles by surface engineering can represent a straightforward method for regulating their blinking behaviors, an area largely unexplored for perovskite nanocrystals (PNCs). This work shows facet engineering leading to different morphologies of PNCs characterized by distinct blinking patterns. For instance, examining the PL intensity trajectories of single PNCs, representing the instantaneous photon count rate over time, reveals that the OFF-state population significantly increases as the number of facets increases from six to twenty-six. This study suggests that extra-faceted PNCs, owing to their polar facets and expanded surface area, render them more susceptible to photocharging, which results in larger OFF-state populations. Furthermore, the fluorescence correlation spectroscopy (FCS) study unveils that the augmented propensity for photocharging in extra-faceted PNCs can also originate from their greater tendency to form complexes with neighboring molecules.

Photochromic Perovskite Nanocrystals for Ultraviolet Dosimetry.

Excessive ultraviolet (UV) radiation has serious damage to human's health, therefore the development of visible, portable, and wearable sensor for monitoring UV radiation, especially the cumulative UV dosage, is highly desired but full of challenges. Herein, a wearable and flexible UV dosimeter based on photochromic perovskite nanocrystals (PNCs) is designed. The obtained CsPbCl3 PNCs dispersed in dibromomethane (PNCs-DBM) undergo continuous, vivid, and multiple (from very weak purple to blue, cyan, and finally strong green) color change in response to UV radiation. It is demonstrated that the UV-induced degradation of DBM and subsequent anion-exchange reaction between CsPbCl3 and Br-, play a crucial role in the color change of PNCs-DBM. The properties of continuous fluorescence color change and enhanced fluorescence intensity enable the construction of sensitive and visible UV dosimeter. Furthermore, by integrated photochromic PNCs with flexible bracelet or PDMS substrate, a wearable UV sensor or a multi-indicator array for the detection of solar UV dosage is developed. This work may advance the fundamental understanding about photochromic perovskite, and show promising application of perovskite nanomaterials in easily fabricated, low-cost, visualized, and wearable solar UV dosimeter.

Color-Tunable Perovskite Nanomaterials with Intense Circularly Polarized Luminescence and Tailorable Compositions.

The ability to design halide perovskite nanocrystals (PNCs) with circularly polarized luminescence (CPL) offers exceptional potential in photonic technologies. Despite recent inspiring advances, the creation of PNCs with full-color tailorablity, outstanding CPL, and long-term stability remains a substantial challenge. Herein, a robust strategy to craft CPL-active PNCs is reported, exhibiting appealing full-color tunable wavelengths, enhanced CPL, and prolonged stability. In contrast to conventional methodologies, this strategy utilizes chiral nematic mesoporous silica (CNMS) as host to render in situ confined growth of diverse achiral PNCs. By strategically engineering photonic bandgap, adjusting loading amount of PNCs, and manipulating cations/anion compositions of PNCs, robust CPL responses with tunable wavelength and intensity are successfully obtained. The resulting PNCs-CNMS achieves stable CPL emissions with full-color tunability and impressive luminescent dissymmetric factors up to -0.17. Remarkably, silica-based hosts as a protective barrier confer exceptional resistance to humidity, photodegradation, and thermal stability, even up to 95 °C. Furthermore, the ability to achieve reversible CPL switching within PNCs-CNMS is attainable by leveraging the responsiveness of CNMS matrix or dynamic behavior of impregnated PNCs. Additionally, circularly polarized light-emitting diode devices based on PNCs-CNMS can be conveniently fabricated. This research affords a powerful platform for designing functional chiroptical materials.

Obtaining Ligand-Free Aqueous Au-Nanoparticles Using Reversible CsPbBr3 ↔ Au@CsPbBr3 Nanocrystal Transformation.

Water-hexane interfacial preparation of photostable Au@CsPbBr3 (Au@CPB) hybrid nanocrystals (NCs) from pure CsPbBr3 (CPB) NCs is reported, with the coexistence of exciton and localized surface plasmon resonance with equal dominance. This enables strong exciton-plasmon coupling in these plasmonic perovskite NCs where not only the photoluminescence is quenched intrinsically due to ultrafast charge separation, but also the light absorption property increases significantly, covering the entire visible region. Using a controlled interfacial strategy, a reversible chemical transformation between CPB and Au@CPB NCs is shown, with the simultaneous eruption of larger-size ligand-free aqueous Au nanoparticles (NPs). An adsorption-desorption mechanism is proposed for the reversible transformation, while the overgrowth reaction of the Au NPs passes through the Au aggregation intermediate. This study further shows that the plasmonic Au@CPB hybrid NCs as well as ligand-free Au NPs exhibit clear surface enhanced Raman scattering (SERS) effect of a commercially available probe molecule. Overall, the beautiful interfacial chemistry delivers two independent plasmonic materials, i.e., Au@CPB NCs and ligand-free aqueous Au NPs, which may find important implications in photocatalytic and biomedical applications.

Lattice Engineering via Transition Metal Ions for Boosting Photoluminescence Quantum Yields of Lead-Free Layered Double Perovskite Nanocrystals.

Lead-free layered double perovskite nanocrystals (NCs), i.e., Cs4M(II)M(III)2Cl12, have recently attracted increasing attention for potential optoelectronic applications due to their low toxicity, direct bandgap nature, and high structural stability. However, the low photoluminescence quantum yield (PLQY, <1%) or even no observed emissions at room temperature have severely blocked the further development of this type of lead-free halide perovskites. Herein, two new layered perovskites, Cs4CoIn2Cl12 (CCoI) and Cs4ZnIn2Cl12 (CZnI), are successfully synthesized at the nanoscale based on previously reported Cs4CuIn2Cl12 (CCuI) NCs, by tuning the M(II) site with different transition metal ions for lattice tailoring. Benefiting from the formation of more self-trapped excitons (STEs) in the distorted lattices, CCoI and CZnI NCs exhibit significantly strengthened STE emissions toward white light compared to the case of almost non-emissive CCuI NCs, by achieving PLQYs of 4.3% and 11.4% respectively. The theoretical and experimental results hint that CCoI and CZnI NCs possess much lower lattice deformation energies than that of reference CCuI NCs, which are favorable for the recombination of as-formed STEs in a radiative way. This work proposes an effective strategy of lattice engineering to boost the photoluminescent properties of lead-free layered double perovskites for their future warm white light-emitting applications.

Exploiting the Photo-Physical Properties of Metal Halide Perovskite Nanocrystals for Bioimaging.

Perovskite nanomaterials have recently been exploited for bioimaging applications due to their unique photo-physical properties, including high absorbance, good photostability, narrow emissions, and nonlinear optical properties. These attributes outperform conventional fluorescent materials such as organic dyes and metal chalcogenide quantum dots and endow them with the potential to reshape a wide array of bioimaging modalities. Yet, their full potential necessitates a deep grasp of their structure-attribute relationship and strategies for enhancing water stability through surface engineering for meeting the stringent and unique requirements of each individual imaging modality. This review delves into this evolving frontier, highlighting how their distinctive photo-physical properties can be leveraged and optimized for various bioimaging modalities, including visible light imaging, near-infrared imaging, and super-resolution imaging.

Tailoring electrocatalytic activity of in situ crafted perovskite oxide nanocrystals via size and dopant control.

Perovskite oxides (ABO3) have been widely recognized as a class of promising noble-metal-free electrocatalysts due to their unique compositional flexibility and structural stability. Surprisingly, investigation into their size-dependent electrocatalytic properties, in particular barium titanate (BaTiO3), has been comparatively few and limited in scope. Herein, we report the scrutiny of size- and dopant-dependent oxygen reduction reaction (ORR) activities of an array of judiciously designed pristine BaTiO3 and doped BaTiO3 (i.e., La- and Co-doped) nanoparticles (NPs). Specifically, a robust nanoreactor strategy, based on amphiphilic star-like diblock copolymers, is employed to synthesize a set of hydrophobic polymer-ligated uniform BaTiO3 NPs of different sizes (≤20 nm) and controlled compositions. Quite intriguingly, the ORR activities are found to progressively decrease with the increasing size of BaTiO3 NPs. Notably, La- and Co-doped BaTiO3 NPs display markedly improved ORR performance over the pristine counterpart. This can be attributed to the reduced limiting barrier imposed by the formation of -OOH species during ORR due to enhanced adsorption energy of intermediates and the possibly increased conductivity as a result of change in the electronic states as revealed by our density functional theory-based first-principles calculations. Going beyond BaTiO3 NPs, a variety of other ABO3 NPs with tunable sizes and compositions may be readily accessible by exploiting our amphiphilic star-like diblock copolymer nanoreactor strategy. They could in turn provide a unique platform for both fundamental and practical studies on a suite of physical properties (dielectric, piezoelectric, electrostrictive, catalytic, etc.) contingent upon their dimensions and compositions.

Synthesis of a water-stable CsPbBr3 perovskite for selective detection of mercury ion in water.

By using the method of low-temperature crystallization, CsPbBr3 perovskite nanocrystals (PNCs) coated with trifluoroacetyl lysine (Tfa-Lys) and oleamine (Olam) were synthesized in aqueous solution. The structure of the CsPbBr3 PNCs was characterized by many methods, such as ultraviolet (UV)-visible absorption spectrophotometer, fluorescence spectrophotometer, transmission electron microscopy (TEM), and X-ray diffraction (XRD) pattern. The fluorescence emission of the CsPbBr3 PNCs is stable in water for about 1 day at room temperature. It was also found that the fluorescence of the PNCs could be obviously and selectively quenched after the addition of mercury ion (Hg2+ ), allowing a visual detection of Hg2+ by the naked eye under UV light illumination. The fluorescence quenching rate (I0 /I) has a good linear relationship with the addition of Hg2+ in the concentration range 0.075 to 1.5 mg/L, with a correlation coefficient (R2 ) of 0.997, and limit of detection of 0.046 mg/L. The fluorescence quenching mechanism of the PNCs was determined by the fluorescence lifetime and X-ray photoelectron spectroscopy (XPS) of the PNCs. Overall, the synthesis method for CsPbBr3 PNCs is simple and rapid, and the as-prepared PNCs are stable in water that could be conveniently used for selective detection of Hg2+ in the water environment.

Tuning the Colloidal Softness of CsPbBr3 Nanocrystals for Homogeneous Superlattices.

Perovskite nanocrystal superlattices (NC SLs), made from millions of ordered crystals, support collective optoelectronic phenomena. Coupled NC emitters are highly sensitive to the structural and spectral inhomogeneities of the NC ensemble. Free electrons in scanning electron microscopy (SEM) are used to probe the cathodoluminescence (CL) properties of CsPbBr3 SLs with a ∼20 nm spatial resolution. Correlated CL-SEM measurements allow for simultaneous characterization of structural and spectral heterogeneities of the SLs. Hyperspectral CL mapping shows multipole emissive domains within a single SL. Consistently, the edges of the SLs are blue-shifted relative to the central domain by up to 65 meV. We discover a relation between NC building block colloidal softness and the extent of the CL shift. Residual uniaxial compressive strains accompanying SL formation are contributors to these emission shifts. Therefore, precise control over the colloidal softness of the NC building blocks is critical for SL engineering.

Pt-CsPbBr3 Perovskite Nanocrystal Heterostructures: All Epitaxial.

Designing heterostructures of soft ionic nanocrystals with metallic or covalent nanostructures having epitaxial junctions in solution poses several fundamental challenges. Hence, in spite of large successes in developing lead halide perovskite nanocrystals, the chemistry of formation of their facet-directive epitaxial growth of noble metals cannot be explored yet. To address this, herein, epitaxial heterostructures of orthorhombic CsPbBr3 and cubic Pt in multiple directional approaches are reported. Appropriate facets of perovskite nanocrystals and high-temperature reaction are the key parameters for obtaining such nanocrystal heterostructures. Interfacial planes at the junctions having ideal lattice matching helped in establishing the epitaxial relations of (110) of orthorhombic (space group Pbnm) CsPbBr3 with {020} of cubic Pt and again (011) of CsPbBr3 with {111} of Pt. These results provided strong fundamental insights that ionic halide perovskite nanostructures and materials having different crystal phases can be placed in a single building block with continuous sublattice structures.

Spectral Fingerprint of Quantum Confinement in Single CsPbBr3 Nanocrystals.

Lead halide perovskite nanocrystals are promising materials for classical and quantum light emission. To understand these outstanding properties, a thorough analysis of the band-edge exciton emission is needed, which is not reachable in ensemble and room-temperature studies because of broadening effects. Here, we report on a cryogenic-temperature study of the photoluminescence of single CsPbBr3 nanocrystals in the intermediate quantum confinement regime. We reveal the size-dependence of the spectral features observed: the bright triplet exciton energy splittings, the trion and biexciton binding energies, and the optical phonon replica spectrum. In addition, we show that bright triplet energy splittings are consistent with a pure exchange model and that the variety of polarization properties and spectra recorded can be rationalized simply by considering the orientation of the emitting dipoles and the populations of the emitting states.

Controllable Colloidal Synthesis of MAPbI3 Perovskite Nanocrystals for Dual-Mode Optoelectronic Applications.

This study demonstrates an acetate ligand (AcO-)-assisted strategy for the controllable and tunable synthesis of colloidal methylammonium lead iodide (MAPbI3) perovskite nanocrystals (PNCs) for efficient photovoltaic and photodetector devices. The size of colloidal MAPbI3 PNCs can be tuned from 9 to 20 nm by changing the AcO-/MA ratio in the reaction precursor. In situ observations and detailed characterization results show that the incorporation of the AcO- ligand alters the formation of PbI6 octahedral cages, which controls PNC growth. A well-optimized AcO-/MA ratio affords MAPbI3 PNCs with a low defect density, a long carrier lifetime, and unique solid-state isotropic properties, which can be used to fabricate solution-processed dual-mode photovoltaic and photodetector devices with a conversion efficiency of 13.34% and a detectivity of 2 × 1011 Jones, respectively. This study provides an avenue to further the precisely controllable synthesis of hybrid PNCs for multifunctional optoelectronic applications.