Ruddlesden-Popper Perovskite Nanocrystals as Interface Modification Layer for Efficient Perovskite Solar Cells.

Perovskite nanocrystals are advantageous for interfacial passivation of perovskite solar cells (PSCs), but the insulating long alkyl chain surface ligands impede the charge transfer, while the conventional ligand exchange would possibly introduce surface defects to the nanocrystals. In this work, we reported novel in situ modification of CsPbBr3 nanocrystals using a short chain conjugated molecule 2-methoxyphenylethylammonium iodide (2-MeO-PEAI) for interfacial passivation of PSCs. Transmission electron microscopy studies with atomic resolution unveil the transformation from cubic CsPbBr3 to Ruddlesden-Popper phase (RPP) nanocrystals due to halogen exchange. Synergic passivation by the RPP nanocrystals and 2-MeO-PEA+ has led to suppressed interface defects and enhanced charge carrier transport. Consequently, PSCs with in situ modified RPP nanocrystals achieved a champion power conversion efficiency of 24.39%, along with an improvement in stability. This work brings insights into the microstructural evolution of perovskite nanocrystals, providing a novel and feasible approach for interfacial passivation of PSCs.

Efficient Homojunction Tin Perovskite Solar Cells Enabled by Gradient Germanium Doping.

P-type self-doping is known to hamper tin-based perovskites for developing high-performance solar cells by increasing the background current density and carrier recombination processes. In this work, we propose a gradient homojunction structure with germanium doping that generates an internal electric field across the perovskite film to deplete the charge carriers. This structure reduces the dark current density of perovskite by over 2 orders of magnitude and trap density by an order of magnitude. The resultant tin-based perovskite solar cells exhibit a higher power conversion efficiency of 13.3% and excellent stability, maintaining 95% and 85% of their initial efficiencies after 250 min of continuous illumination and 3800 h of storage, respectively. We reveal the homojunction formation mechanism using density functional theory calculations and molecular level characterizations. Our work provides a reliable strategy for controlling the spatial energy levels in tin perovskite films and offers insights into designing intriguing lead-free perovskite optoelectronics.

MgAc2-Modified SnO2 Electron Transport Layer for Highly Efficient and Thermal Stable Perovskite Solar Cells.

There are always defects and oxygen vacancies in SnO2 prepared by solution methods, hindering efficient carrier transfer between SnO2 and the perovskite in perovskite solar cells. Thus, we employed MgAc2 to modify the interface. Carboxyl groups of MgAc2 filled the oxygen vacancies in SnO2, reducing its surface defect density, and Mg2+ partially replaced surface Sn4+, improving the properties of the SnO2 layer. Finally, perovskite solar cells modified with MgAc2 exhibited a significant improvement in open-circuit voltage and fill factor, improving the power conversion efficiency from 20.52% to 22.02%. Moreover, MgAc2-devices maintained 80% of the initial efficiency after 1250 h in thermal stability tests at 85 °C and 30% relative humidity compared to control devices. This work provides a method for treating the SnO2 electron transport layer and demonstrates the synergistic effects of Mg2+ and acetate ions, which can facilitate the development of efficient and stable perovskite solar cells.

Single Crystal Seed Induced Epitaxial Growth Stabilizes α-FAPbI3 in Perovskite Solar Cells.

FAPbI3 stands out as an ideal candidate for the photoabsorbing layer of perovskite solar cells (PSCs), showcasing outstanding photovoltaic properties. Nonetheless, stabilizing photoactive α-FAPbI3 remains a challenge due to the lower formation energy of the competitive photoinactive δ-phase. In this study, we employ tetraethylphosphonium lead tribromide (TEPPbBr3) single crystals as templates for the epitaxial growth of PbI2. The strategic use of TEPPbBr3 optimizes the evolution of intermediates and the crystallization kinetics of perovskites, leading to high-quality and phase-stable α-FAPbI3 films. The TEPPbBr3-modified perovskite exhibits optimized carrier dynamics, yielding a champion efficiency of 25.13% with a small voltage loss of 0.34 V. Furthermore, the target device maintains 90% of its initial PCE under maximum power point (MPP) tracking over 1000 h. This work establishes a promising pathway through single crystal seed based epitaxial growth for achieving satisfactory crystallization regulation and phase stabilization of α-FAPbI3 perovskites toward high-efficiency and stable PSCs.

Modulating Nucleation and Crystal Growth of Tin Perovskite Films for Efficient Solar Cells.

The performance of tin halide perovskite solar cells (PSCs) has been severely limited by the rapid crystallization of tin perovskites, which usually leads to an undesirable film quality. In this work, we tackle this issue by regulating the nucleation and crystal growth of tin perovskite films using a small Lewis base additive, urea. The urea-SnI2 interaction facilitates the formation of larger and more uniform clusters, thus accelerating the nucleation process. Additionally, the crystal growth process is extended, resulting in a high-quality tin perovskite film with compact morphology, increased crystallinity, and reduced defects. Consequently, the efficiency of tin PSCs is significantly increased from 10.42% to 14.22%. This work highlights the importance of manipulating the nucleation and crystal growth of tin perovskites to realize efficient tin PSCs.

Chemical Bath Deposited Antimony Oxide Thin Films for Efficient Perovskite Solar Cells.

The metal oxide electron transport layers (ETLs) of n-i-p perovskite solar cells (PSCs) are dominated by TiO2 and SnO2, while the efficacy of the other metal oxide ETLs still lags far behind. Herein, an emerging, economical, and environmentally friendly metal oxide, antimony oxide (Sb2Ox, x = 2.17), prepared by chemical bath deposition is reported as an alternative ETL for PSCs. The deposited Sb2Ox film is amorphous and very thin (∼10 nm) but conformal on rough fluorine-doped tin oxide substrates, showing matched energy levels, efficient electron extraction, and then reduced nonradiative recombination in PSCs. The champion PSC based on the Sb2Ox ETL delivers an impressive power conversion efficiency of 24.7% under one sun illumination, which represents the state-of-the-art performance of all metal oxide ETL-based PSCs. Additionally, the Sb2Ox-based devices show improved operational and thermal stability compared to their SnO2-based counterparts. Armed with these findings, we believe this work offers an optional ETL for perovskites-based optoelectronic devices.

A Pyrrole Modified 3,4-Propylenedioxythiophene Conjugated Polymer as Hole Transport Layer for Efficient and Stable Perovskite Solar Cells.

Despite the outstanding electric properties and cost-effectiveness of poly(3,4-ethylenedioxythiophene) (PEDOT) and its derivatives, their performance as hole transport layer (HTL) materials in conventional perovskite solar cells (PSCs) has lagged behind that of widely used spirobifluorene-based molecules or poly(triaryl amine). This gap is mainly from their poor solubility and energy alignment mismatch. In this work, the design and synthesis of a pyrrole-modified HTL (PPr) based on 3,4-propylenedioxythiophene (ProDOT) are presented for efficient and stable PSCs. As a result of the superior defects passivation ability, excellent contact with perovskite, enhanced hole extraction, and high hydrophobicity, the unencapsulated PPr-based PSCs showed the peak PCE of 21.49% and outstanding moisture stability (over 4000 h). This work highlights the potential application of ProDOT-based materials as HTL for PSCs and underscores the importance of the rational design of PEDOT and its derivatives.

An Eco-Friendly Passivation Strategy of Resveratrol for Highly Efficient and Antioxidative Perovskite Solar Cells.

The stability of perovskite solar cells is closely related to the defects in perovskite crystals, and a large number of crystal defects are caused by the solution method. In this study, resveratrol (RES), a green natural antioxidant abundant in knotweed and grape leaves, is introduced into perovskite films to passivate the defect. RES achieves defect passivation by interacting with uncoordinated Pb2+ in perovskite films. The defect formation energy of VPb and PbI on the surface of perovskite thin films is increased by RES doping, as calculated by density functional theory. The results show that the quality of the perovskite film is significantly improved, and the energy level structure of the device is optimized, and the power conversion efficiency (PCE) of the device is increased from 21.62% to 23.44%. RES can hinder the degradation of perovskite structures by O2 - free radicals, and the device retained 88% of its initial PCE after over 1000 h in pure oxygen environment. The device retains 91% of the initial PCE after >1000 h at 25 °C and 50 ± 5% relative humidity. This work provides an idea for the use of natural and environmentally friendly additives to improve the efficiency and stability of devices.

Controlling Nucleation and Crystallization of CsPbI3 Perovskites for Efficient Inverted Solar Cells.

The unfavorable morphology and high crystallization temperature (Tc) of inorganic perovskites pose a significant challenge to their widespread application in photovoltaics. In this study, an effective approach is proposed to enhance the morphology of cesium lead triiodide (CsPbI3) while lowering its Tc. By introducing dimethylammonium acetate into the perovskite precursor solution, a rapid nucleation stage is facilitated, and significantly enhances the crystal growth of the intermediate phase at low annealing temperatures, followed by a slow crystal growth stage at higher annealing temperatures. This results in a uniform and dense morphology in CsPbI3 perovskite films with enhanced crystallinity, simultaneously reducing the Tc from 200 to 150 °C. Applying this approach in positive-intrinsic-negative (p-i-n) inverted cells yields a high power conversion efficiency of 19.23%. Importantly, these cells exhibit significantly enhanced stability, even under stress at 85 °C.

Promoting Ruddlesden-Popper Perovskite Formation by Tailoring Spacer Intramolecular Interaction for Efficient and Stable Solar Cells.

Low-dimensional Ruddlesden-Popper phase (LDRP) perovskites are widely studied in the field of photovoltaics due to their tunable energy-band properties, enhanced photostability, and improved environmental stability compared to the 3D perovskites. However, the insulating spacers with weak intramolecular interaction used in LDRP materials limit the out-of-plane charge transport, leading to poor device performance of LDRP perovskite solar cells (PSCs). Here, a functional ligand, 3-guanidinopropanoic acid (GPA), which is capable of forming strong intramolecular hydrogen bonds through the carboxylic acid group, is employed as an organic spacer for LDRP PSCs. Owing to the strong interaction between GPA molecules, high-quality LDRP (GPA)2(MA)n-1PbnI3n+1 film with promoted formation of n = 5 phase, improved crystallinity, preferential vertical growth orientations, reduced trap-state density, and prolonged carrier lifetime is achieved using GPAI as the dimensionality regulator compared to butylamine hydroiodide (BAI). As a result, GPA-based LDRP PSC exhibits a champion power conversion efficiency of 18.16% that is much superior to the BA-based LDRP PSC (15.43%). Importantly, the optimized GPA-based LDRP PSCs without encapsulation show enhanced illumination, thermal, storage, and humidity stability compared to BA-based ones. This work provides new insights into producing high n value LDRP films and their efficient and stable PSCs.

Efficient Inverted Perovskite Photovoltaics Through Surface State Manipulation.

Inverted perovskite solar cells (PSCs) are considered as the most promising avenue for the commercialization of PSCs due to their potential inherent stability. However, suboptimal interface contacts between electron transport layer (ETL) (such as C60) and the perovskite absorbing layer within inverted PSCs always result in reduced efficiency and poor stability. Herein, a surface state manipulation strategy has been developed by employing a highly electronegative 4-fluorophenethylamine hydrochloride (p-F-PEACl) to effectively address the issue of poor interface contacts in the inverted PSCs. The p-F-PEACl demonstrates a robust interaction with perovskite film through bonding of amino group and Cl- with I- and Pb2+ ions in the perovskite, respectively. As such, the surface defects of perovskite film can be significantly reduced, leading to suppressed non-radiative recombination. Moreover, p-F-PEACl also plays a dual role in enhancing the surface potential and improving energy-level alignment at the interfaces between the perovskite and C60 carrier transport layer, which directly contributes to efficient charge extraction. Finally, the open-circuit voltage (Voc) of devices increases from 1.104 V to 1.157 V, leading to an overall efficiency improvement from 22.34% to 24.78%. Furthermore, the p-F-PEACl-treated PSCs also display excellent stability.

Anti-Solvent-Free Fabrication of Stable FA0.9Cs0.1PbI3 Perovskite Solar Cells with Efficiency Exceeding 24.0% through a Naphthalene-Based Passivator.

The anti-solvent-free fabrication of high-efficiency perovskite solar cells (PSCs) holds immense significance for the transition from laboratory-scale to large-scale commercial applications. However, the device performance is severely hindered by the increased occurrence of surface defects resulting from the lack of control over nucleation and crystallization of perovskite using anti-solvent methods. In this study, 2-(naphthalen-2-yl)ethylamine hydriodide (NEAI) is employed as the surface passivator for perovskite films without using any anti-solvent. Naphthalene demonstrates strong π-π conjugation, which aids in the efficient extraction of charge carriers. Additionally, the naphthalene-ring moieties form a tight attachment to the perovskite surface. After NEAI treatment, FA and I vacancies are selectively occupied by NEA+ and I- in NEAI respectively, thus effectively passivating the surface defects and isolating the surface from moisture. Ultimately, the optimized NEAI-treated device achieves a promising power conversion efficiency (PCE) of 24.19% (with a certified efficiency of 23.94%), featuring a high fill factor of 83.53%. It stands out as one of the reported high PCEs achieved for PSCs using the spin-coating technique without the need for any anti-solvent so far. Furthermore, the NEAI-treated device can maintain ≈87% of its initial PCE after 2000 h in ambient air with a relative humidity of 30% ± 5%.

Designing Surface Passivators Through Intramolecular Potential Manipulation for Efficient and Stable Perovskite Solar Cells.

The conjugation of terminal ammonium salt groups with perovskite surfaces is a frequently employed technique that aims to enhance the overall performance of perovskite materials, encompassing both bulk and surface properties. Particularly, it exhibits heightened efficacy when applied to surface modification, due to its ability to mitigate defect accumulation and facilitate facile binding with the receptive sites inherent to the perovskite structure. However, the interaction of the bulk ammonium group with PbI2 has the potential to form a low-dimensional phase of perovskite, which may obstruct carrier extraction at the interface. Therefore, the surface passivators (MeO-PFACl) are designed through intramolecular potential manipulation. The combinations of the electron-donating methoxy group and π-π conjugation of the phenyl ring reduce the local potential at the reactive site of formamidinium group, making it less likely to form a low-dimension phase with perovskite. This surface passivation strategy effectively suppresses the surface nonradiative recombination and promotes the interface carrier extraction. The devices treated with MeO-PFACl have demonstrated exceptional performance, achieving a peak power conversion efficiency (PCE) of 25.88%, with an average PCE of 25.37%. These works offer a novel principle for enhancing both the efficiency and stability of PSCs using ammonium-incorporated molecules without the induction of an additional phase layer.

Minimizing Voltage Losses via Synergistically Reducing Hetero-Interface Energy Offset for High Efficiency Perovskite Solar Cells.

The open circuit voltage (VOC) losses at multiple interfaces within perovskite solar cells (PSCs) limit the improvements in power conversion efficiency (PCE). Herein, a tailored strategy is proposed to reduce the energy offset at both hetero-interfaces within PSCs to decrease the VOC losses. For the interface of perovskite and electron transport layer where exists a mass of defects, it uses the pyromellitic acid to serve as a molecular bridge, which reduces non-radiative recombination and energy level offset. For the interface of perovskite and hole transport layer, which includes a passivator of PEAI, the detrimental effect (negative shift of work function) of PEAI passivation and optimizing the interface energy level alignment are neutralized by incorporating (2-(4-(bis(4-methoxyphenyl)amino)phenyl)-1-cyanovinyl)phosphonic acid. Owing to synergistically reduced hetero-interface energy offset, the PSCs achieve a PCE of 25.13%, and the VOC is increased from 1.134 to 1.174 V. In addition, the resulting PSCs possess enhanced stability, the unencapsulated PSCs can maintain ≈96% and ≈97% of their initial PCE after 2000 h of aging under ambient conditions and 210 h under operation conditions.

Bilateral Production Shield Enabling Highly Efficient Perovskite Photovoltaics.

Enhancing the intrinsic stability of perovskite and through encapsulation to isolate water, oxygen, and UV-induced decomposition are currently common and most effective strategies in perovskite solar cells. Here, the atomic layer deposition process is employed to deposit a nanoscale (≈100 nm), uniform, and dense Al2O3 film on the front side of perovskite devices, effectively isolating them from the erosion caused by water and oxygen in the humid air. Simultaneously, nanoscale (≈100 nm) TiO2 films are also deposited on the glass surface to efficiently filter out the ultraviolet (UV) light in the light source, which induces degradation in perovskite. Ultimately, throughthe collaborative effects of both aspects, the stability of the devices is significantly improved under conditions of humid air and illumination. As a result, after storing the devices in ambient air for 1000 h, the efficiency only declines to 95%, and even after 662 h of UV exposure, the efficiency remains at 88%, far surpassing the performance of comparison devices. These results strongly indicate that the adopted Al2O3 and TiO2 thin films play a significant role in enhancing the stability of perovskite solar cells, demonstrating substantial potential for widespread industrial applications.

Printable Counter Electrode with Metal Nitride as the Conductive Medium for Perovskite Solar Cells.

Perovskite solar cells (PSCs) with a booming high power conversion efficiency (PCE) are on their road toward industrialization. A proper design of the counter electrode (CE) with low cost, high conductivity, chemical stability, and good interface contact with the other functional layer atop the perovskite layer is vital for the overall performance of PSCs. Herein, the application of titanium nitride (TiN) is reported as a conductive medium for the printable CE in hole-conductor-free mesoscopic PSCs. TiN improves the conductivity of the CE and reduces the resistivity from 20 to 10 mΩ∙cm. TiN also improves the wettability of the CE with perovskite and enhances the back interface contact, which promotes charge collection. On the other hand, TiN is chemically stable during processing and undergoes no distinguishable chemical reaction with halide perovskite. Devices with TiN as the conductive media in the CE deliver a champion PCE of 19.01%. This work supplies a considerable choice for the CE design of PSCs toward industrial applications.

Ternary-Metal Sn-Pb-Zn Perovskite to Reconstruct Top Surface for Efficient and Stable Less-Pb Perovskite Solar Cells.

Though Sn-Pb alloyed perovskite solar cells (PSCs) achieved great progress, there is a dilemma to further increase Sn for less-Pb requirement. High Sn ratio (>70%) perovskite exhibits nonstoichiometric Sn:Pb:I at film surface to aggravate Sn2+ oxidation and interface energy mismatch. Here, ternary metal alloyed (FASnI3 )0.7 (MAPb1- x Znx I3 )0.3 (x = 0-3%) is constructed for Pb% < 30% perovskite. Zn with smaller ionic size and stronger ionic interaction than Sn/Pb assists forming high-quality perovskite film with ZnI6 4- enriched at surface to balance Sn:Pb:I ratio. Differing from uniform bulk doping, surface-rich Zn with lower lying orbits pushes down the energy band of perovskite and adjusts the interface energy for efficient charge transfer. The alloyed PSC realizes efficiency of 19.4% at AM1.5 (one of the highest values reported for Pb% < 30% PSCs). Moreover, stronger bonding of Zn─I and Sn─I contributes to better durability of ternary perovskite than binary perovskite. This work highlights a novel alloy method for efficient and stable less-Pb PSCs.

Competitive Formation Mechanism for Bidentate Passivation of Halogen Vacancies in Perovskite Based on 6-Chloropurine.

For metal halide perovskite solar cells, bidentate passivation (BP) is highly effective, but currently, only passivation sites rather than molecular environments are being considered. Here, the authors report an effective approach for high-performance fully printable mesoscopic perovskite solar cells (FP-PSCs) through the BP strategy using the multidentate molecule 6-chloropurine (6-CP). By utilizing density functional theory (DFT) calculations, X-ray photoelectron spectroscopy (XPS), and Fourier transform infrared spectroscopy (FTIR) characterizations, the competition mechanism is identified of BP between the chlorine atom and neighboring nitrogen atom of the imidazole and pyrimidine rings. Through BP between the chlorine atom and adjacent nitrogen atom in imidazole, the power conversion efficiency (PCE) of the pristine samples is significantly enhanced from 16.25% to 17.63% with 6-CP. The formation of BP enhances interfacial hole selectivity and charge transfer, and suppresses nonradiative recombination, improving device stability under high humidity conditions. The competition mechanism of BP between two aromatic cycles provides a path for designing molecular passivants and selecting passivation pathways to approach theoretical limits.

Perovskite Solar Cells Based on Polymerized Chlorophyll Films as Environmentally Friendly Hole-Transporting Layers.

Hole-transporting layers (HTLs) play a crucial role in the performance of inverted, p-i-n perovskite solar cells (PSCs). Chlorophylls (Chls) are naturally abundant organic photoconductors on earth, with good charge carrier mobility and appropriate Fermi energy levels that make them promising candidates for use in photovoltaic devices. However, Chls films prepared using the solution method exhibit lower carrier mobility compared to other organic polymer films, which limits their application in PSCs. To address this issue, Chls molecules are chemically linked to reduce the charge transfer barrier, thus the transfer of charges between molecules is transformed to intramolecular charge transfer. This study synthesizes and characterizes two polymerized Chl films, PolyCuChl and PolyNiChl, as HTLs of CH3 NH3 PbI3 -based PSCs. PSCs based on the electrochemical polymerization of PolyChl HTLs demonstrate an enhanced power conversion efficiency (PCE) of up to 19.0%, which is the highest efficiency among devices based on Chl materials. Furthermore, these devices demonstrated exceptional long-term stability. These results highlight the potential of polymerized Chl films as a viable alternative to conventional HTLs in PSCs. The approach utilizes abundant, environmentally friendly, and versatile Chl derivatives, and can be extended to develop next-generation HTL materials for improved PSC performance.

Suppressed Ion Migration in FA-Rich Perovskite Photovoltaics through Enhanced Nucleation of Encapsulation Interface.

With excellent homogeneity, compactness and controllable thickness, atomic layer deposition (ALD) technology is widely used in perovskite solar cells (PSCs). However, residual organic sources and undesired reactions pose serious challenges to device performance as well as stability. Here, ester groups of poly(ethylene-co-vinyl acetate) are introduced as a reaction medium to promote the nucleation and complete conversion of tetrakis(dimethylamino)tin(IV) (TDMA-Sn). Through simulations and experiments, it is verified that ester groups as Lewis bases can coordinate with TDMA-Sn to facilitate homogeneous deposition of ALD-SnOx , which acts as self-encapsulated interface with blocking properties against external moisture as well as internal ion migration. Meanwhile, a comprehensive evaluation of the self-encapsulated interface reveals that the energy level alignment is optimized to improve the carrier transport. Finally, the self-encapsulated device obtains a champion photovoltaic conversion efficiency (PCE) of 22.06% and retains 85% of the initial PCE after being stored at 85 °C with relative humidity of 85% for more than 800 h.