Reusable glycan microarrays using a microwave assisted wet-erase (MAWE) process.

Modern studies on binding of proteins to glycans commonly involve the use of synthetic glycans and their derivatives in which a small amount of the material is covalently printed onto a functionalized slide in a glycan microarray format. While incredibly useful to explore binding interactions with many types of samples, the common techniques involve drying the slides, which leads to irreversible association of the protein to the spots on slides to which they bound, thus limiting a microarray to a single use. We have developed a new technique which we term Microwave Assisted Wet-Erase (MAWE) glycan microarrays. In this approach we image the slides under wet conditions to acquire the data, after which the slides are cleaned of binding proteins by treatment with a denaturing SDS solution along with microwave treatment. Slides cleaned in this way can be reused multiple times, and an example here shows the reuse of a single array 15 times. We also demonstrate that this method can be used for a single-array per slide or multi-array per slide platforms. Importantly, the results obtained using this technique for a variety of lectins sequentially applied to a single array, are concordant to those obtained via the classical dry approaches on multiple slides. We also demonstrate that MAWE can be used for different types of samples, such as serum for antibody binding, and whole cells, such as yeast. This technique will greatly conserve precious glycans and prolong the use of existing and new glycan microarrays.

Ultrastrong and Reusable Solar‒Thermal‒Electric Generators by Economical Starch Vitrimers.

In frigid regions, it is imperative to possess functionality materials that are ultrastrong, reusable, and economical, providing self-generated heat and electricity. One promising solution is a solar‒thermal‒electric (STE) generator, composed of solar‒thermal conversion phase change composites (PCCs) and temperature-difference power-generation-sheets. However, the existing PCCs face challenges with conflicting requirements for solar‒thermal conversion efficiency and mechanical robustness, mainly due to monotonous functionalized aerogel framework. Herein, a novel starch vitrimer aerogel is proposed that incorporates orientational distributed carboxylated carbon nanotubes (CCNT) to create PCC. This innovative design integrates large through-holes, mechanical robustness, and superior solar‒thermal conversion. Remarkably, PCC with only 0.8 wt.% CCNT loading achieves 85.8 MPa compressive strength, 102.4 °C at 200 mW cm-2 irradiation with an impressive 92.9% solar-thermal conversion efficiency. Noteworthy, the STE generator assembled with PCC harvests 99.1 W m-2 output power density, surpassing other reported STE generators. Strikingly, even under harsh conditions of -10 °C and 10 mW cm‒2 irradiation, the STE generator maintains 20 °C for PCC with 325 mV output voltage and 45 mA current, showcasing enhanced electricity generation in colder environments. This study introduces a groundbreaking STE generator, paving the way for self-sufficient heat and electricity supply in cold regions.

Functionalization of microbubbles in a microfluidic chip for biosensing application.

Microbubbles are widely used for biomedical applications, ranging from imagery to therapy. In these applications, microbubbles can be functionalized to allow targeted drug delivery or imaging of the human body. However, functionalization of the microbubbles is quite difficult, due to the unstable nature of the gas/liquid interface. In this paper, we describe a simple protocol for rapid functionalization of microbubbles and show how to use them inside a microfluidic chip to develop a novel type of biosensor. The microbubbles are functionalized with biochemical ligand directly at their generation inside the microfluidic chip using a DSPE-PEG-Biotin phospholipid. The microbubbles are then organized inside a chamber before injecting the fluid with the bioanalyte of interest through the static bubbles network. In this proof-of-concept demonstration, we use streptavidin as the bioanalyte of interest. Both functionalization and capture are assessed using fluorescent microscopy thanks to fluorescent labeled chemicals. The main advantages of the proposed technique compared to classical ligand based biosensor using solid surface is its ability to rapidly regenerate the functionalized surface, with the complete functionalization/capture/measurement cycle taking less than 10 min.

Perspectives on technology: to use or to reuse, that is the endoscopic question-a systematic review of single-use endoscopes.

OBJECTIVE: To compare clinical outcomes of single-use endoscopes with those of reusable endoscopes to better define their role within urology. METHODS: A systematic search of electronic databases was performed. All studies comparing the clinical outcomes of participants undergoing urological procedures with single-use endoscopes to those of participants treated with reusable endoscopes were included. Results are reported in accordance with the Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) 2020 statement. RESULTS: Twenty-one studies in 3943 participants were identified. Six different single-use flexible ureteroscopes and two different single-use flexible cystoscopes were assessed. There were no differences in mean postoperative infection rates (4.0% vs 4.4%; P = 0.87) or overall complication rates (11.5% vs 11.9%; P = 0.88) between single-use and reusable endoscopes. For patients undergoing flexible ureteroscopy there were no differences in operating time (mean difference -0.05 min; P = 0.96), length of hospital stay (LOS; mean difference 0.06 days; P = 0.18) or stone-free rate (SFR; 74% vs 74.3%; P = 0.54) between the single-use and reusable flexible ureteroscope groups. CONCLUSION: This study is the largest to compare the clinical outcomes of single-use endoscopes to those of reusable endoscopes within urology, and demonstrated no difference in LOS, complication rate or SFR, with a shorter operating time associated with single-use flexible cystoscope use. It also highlights that the cost efficiency and environmental impact of single-use endoscopes is largely dependent on the caseload and reprocessing facilities available within a given institution. Urologists can therefore feel confident that whether they choose to 'use' or to 'reuse' based on the financial and environmental implications, they can do so without negatively impacting patient outcomes.

Perspectives on technology: Single-use catheters - evidence and environmental impact.

OBJECTIVE: To explore the data comparing single- vs multi-use catheters for clean intermittent catheterisation (CIC), consider if the widespread use of single-use catheters is warranted given the cost and environmental impact, and put forth ideas for future consideration. METHODS: A primary literature review was performed in PubMed over the past 50 years. Studies that performed comparative analysis of single- and multi-use catheters were included in our review. All studies that reported on primary data were narratively summarised. RESULTS: A total of 11 studies were identified that reported on primary data comparing single- and multi-use catheters. There was no appreciable evidence suggesting reusable multi-use catheters were inferior to single-use catheters from an infection or usability standpoint. In addition, the environmental and monetary burden of single-use catheters is significant. CONCLUSIONS: The intermittent catheter landscape in the USA has a complex past: defined by policy, shaped by industry, yet characterised by a paucity of data demonstrating superiority of single-use over multi-use catheters. We believe that the aversion to reusable catheters by many patients and healthcare professionals is unwarranted, especially given the cost and environmental impact. Moving forward, better comparative data and more sustainable practices are needed.

Facile and cost-effective fabrication of wearable alpha-naphtholphthalein-based halochromic sensor for wound pH monitoring.

The sensor, designed to be worn directly on the skin, is suitable for real-time monitoring of the recovery level of not only general wounds, but also difficult-to-heal wounds, such as those with chronic inflammation. Notably, healthy skin has a pH range of 4-6. When a wound occurs, the pH is known to be approximately 7.4. In this study, alpha-naphtholphthalein (Naph) was immersed in a cotton-blended textile to produce a wearable halochromic sensor that clearly changed color depending on the pH of the skin in the range 6-9, including pH 7.4, which is the skin infection state. The coating was performed without using an organic solvent by dissolving it in micelle form using cetyltrimethylammonium bromide, a surfactant, in water. Naph-based halochromic sensor shows light yellow, which is the dye's own color, at pH 6, which is a healthy skin condition, and gradually showed a clear color change to light green-green-blue as pH increased. Even after washing and drying by rubbing with regular tap water, the color change due to pH was maintained more than 10 times. Naph-based halochromic sensors use a simple solution production and coating method and are not only reusable sensors that can be washed with water but also use environmentally friendly water, making them very suitable for developing commercial products for wound pH monitoring. In addition, it can be easily applied to medical supplies, such as medical gauze, patient clothes, and compression bandages, as well as everyday wear, such as clothing, gloves, and socks. Therefore, it is expected to be widely used as a wound pH sensor, allowing real-time monitoring of the skin condition of individuals with chronic skin inflammation, including patients requiring wound recovery.

Million Microfiber Releases: Comparing Washable and Disposable Face Masks.

The extensive use of single-use or disposable face masks has raised environmental concerns related to microfiber contamination. In contrast, research on the potential release and ecological impact of microfibers from washable masks (WMs), suggested as an eco-friendly alternative, is currently lacking. Here, we comprehensively investigated the release of microfibers from disposable and WMs of different types in simulated aquatic environments and real-life scenarios, including shaking, disinfection, hand washing, and machine washing. Using a combination of wide-field fluorescence microscopy, He-ion microscopy, and confocal µ-Raman spectroscopy, we revealed that disposable masks (DMs) released microfibers ranging from 18 to 3042 microfiber/piece, whereas WMs released 6.1 × 104-6.7 × 106 microfibers/piece depending on the simulated conditions above. Another noteworthy finding was the observed negative correlation between microfiber release and the proportion of reinforcement (embossing) on the DM surfaces. Microfibers from tested DMs primarily comprised polypropylene (PP), while WMs predominantly released poly(ethylene terephthalate) (PET) and cellulose microfibers. Furthermore, acute toxicological analyses unveiled that PP microfibers (0.01-50 mg/L) from DMs impacted zebrafish larval swimming behavior, while PET microfibers from WMs delayed early-stage zebrafish hatching. This study offers new insights into the source of microfiber contamination and raises concerns about the environmental implications linked to the use of washable face masks.

Patient preferences for disposable and reusable vaginal specula and their willingness to compromise in the era of climate change: A cross-sectional study.

OBJECTIVE: To evaluate patient satisfaction on gynaecological examination with metal, plastic and biobased plastic vaginal specula, and to investigate whether patients are willing to compromise on comfort for a more sustainable healthcare system. DESIGN: Cross-sectional study: population-based survey. SETTING: Gynaecological outpatient clinics in five Dutch hospitals. POPULATION: Patients during general gynaecology consultation hours. METHODS: A survey containing two questions about patient demographics, four about comfort and five about sustainability and healthcare was distributed. MAIN OUTCOME MEASURES: Comfort score (scale 1-10). SECONDARY OUTCOMES: (1) temperature, size and ease of insertion, (2) willingness to compromise for a more sustainable healthcare system. RESULTS: In all, 196 patients completed the survey. Biobased plastic vaginal specula scored significantly higher on comfort than the metal ones (mean 8.03 ± 1.65 versus 7.26 ± 1.51 respectively; P < 0.001). The biobased plastic vaginal speculum is significantly the most comfortable on temperature, whereas the metal speculum is the least comfortable (P < 0.007). Most patients are willing to compromise on comfort or are open to the reuse of disposables to contribute to a more sustainable healthcare. The majority of patients (77%) urge healthcare organisations to combat climate change. CONCLUSIONS: There is a small but statistically significant difference in favour of a biobased plastic speculum regarding comfort score, although it might be questioned whether this is clinically relevant. Furthermore, patients are willing to compromise on comfort for a more sustainable healthcare, which should be a contributing factor in speculum selection.

N, S-Codoped Carbon Dots-Based Reusable Solvatochromic Organogel Sensors for Detecting Organic Solvents.

The visualization and analysis of organic solvents using fluorescent sensors are crucial, given their association with environmental safety and human health. Conventional fluorescent sensors are typically single-use sensors and they often require sophisticated measurement instruments, which limits their practical and diverse applications. Herein, we develop solvatochromic nitrogen and sulfur codoped carbon dots (NS-CDs)-based organogel sensors that display color changes in response to different solvents. NS-CDs are synthesized using a solvothermal method to produce monodispersed particles with exceptional solubility in various organic solvents. NS-CDs exhibit distinct photoluminescent emission spectra that correlate with the solvent polarity, and the solvent-dependent photoluminescent mechanism is investigated in detail. To highlight the potential application of solvatochromic NS-CDs, portable and low-cost NS-CDs-embedded organogel sensors are fabricated. These sensors exhibit highly robust solvatochromic performance despite repeated solvent switches, thus ensuring consistent and reliable measurements in practical applications. This study provides valuable insights into the solvatochromism of carbon dots and opens up new avenues for designing real-time organic solvent sensing platforms.

Controllable and reusable seesaw circuit based on nicking endonucleases.

Seesaw circuits are essential for molecular computing and biosensing. However, a notable limitation of seesaw circuits lies in the irreversible depletion of components, precluding the attainment of system recovery and rendering nucleic acid circuits non-reusable. We developed a brand-new method for creating controllable and reusable seesaw circuits. By using the nicking endonucleases Nt.BbvCI and Nt.Alwi, we removed "functional components" while keeping the "skeletal components" for recurrent usage. T-inputs were introduced, increasing the signal-to-noise ratio of AND logic from 2.68 to 11.33 and demonstrating compatibility. We identified the logic switching feature and verified that it does not impair circuit performance. We also built intricate logic circuits, such as OR-AND gate, to demonstrate the versatility of our methodology. This controllable reusability extends the applications of nanotechnology and bioengineering, enhancing the practicality and efficiency of these circuits across various domains.

Clinical comparative study of single-use and reusable digital flexible ureteroscopy for the treatment of lower pole stones: a retrospective case-controlled study.

OBJECTIVES: To compare the clinical efficacy and safety of single-use and reusable digital flexible ureteroscopy for the treatment of lower pole stones. METHODS: We enrolled 135 patients underwent reusable flexible ureteroscopy (FURS) and 78 patients underwent single-use digital FURS. Demographic, clinical variables, anatomical parameters of the lower calyx and perioperative indicators were compared in the two groups. RESULTS: Thirty-six patients in the infundibuloureter angle (IPA) < 45° subgroup had a mini-percutaneous nephrolithotomy (mini-PCNL), including 25 patients in the reusable FURS group and 11 patients in the single-use FURS group. The demographic and clinical variables in the two FURS groups were comparable. There was no statistical difference in the success rate of stone searching (P > 0.05). In terms of the success rate of lithotripsy, there was also no statistical difference in the IPA ≥ 45° subgroup (P > 0.05), whereas single-use FURS was superior in the IPA < 45° subgroup (χ2 = 6.513, P = 0.011). The length of the working fiber in the reusable FURS and single-use FURS groups was 3.20 ± 0.68 mm and 1.75 ± 0.47 mm, respectively (t = 18.297, P < 0.05). The use of a stone basket in the reusable FURS (31/135, 23.0%) was significantly higher than that in the single-use FURS (8/78, 10.3%) (χ2 = 5.336, P = 0.021). Compared with the reusable FURS group, the single-use FURS group had shorter operation times (P < 0.05) and higher stone-free rate (SFR) (χ2 = 4.230, P = 0.040). There was no statistical difference in the intraoperative transfer of mini-PCNL and postoperative complications between the two groups (P > 0.05). CONCLUSIONS: Single-use and reusable FURS are alternative methods for removal of lower pole stones (i.e., 2 cm or less). Single-use FURS has a high success rate of lithotripsy, shorter operation time, and high stone-free rate.

Integrated procurement and reprocessing planning for reusable medical devices with a limited shelf life.

We present a new model formulation for a multiproduct dynamic order quantity problem with product returns and a reprocessing option. The optimization considers the limited shelf life of sterile medical devices as well as the capacity constraints of reprocessing and sterilization resources. The time-varying demand is known in advance and must be satisfied by purchasing new medical devices or by reprocessing used and expired devices. The objective is to determine a feasible procurement and reprocessing plan that minimizes the incurred costs. The problem is solved in a heuristic manner in two steps. First, we use a Dantzig-Wolfe reformulation of the underlying problem, and a column generation approach is applied to tighten the lower bound. In the next step, the obtained lower bound is transformed into a feasible solution using CPLEX. Our numerical results illustrate the high solution quality of this approach. The comparison with a simulation based on the first-come-first-served principle shows the advantage of integrated planning.

In vitro Comparison of the Mechanical and Optical Characteristics of 5 Disposable Flexible Ureteroscopes.

INTRODUCTION: Disposable (single-use) flexible ureteroscopes are alternatives to reusable ureteroscopes. With their superior surgical efficacy and safety in the presence of upper urinary calculi, disposable ureteroscopes aim to overcome the main limitations of conventional reusable ureteroscopes. However, studies on the performance of the most recently developed models of single-use flexible ureteroscopes are scarce. This study aimed to compare the in vitro performance of several recently introduced, single-use, flexible ureteroscopes. METHODS: Five disposable flexible ureteroscopes were tested in vitro to evaluate their mechanical and optical characteristics. To this end, their degrees of deflection, irrigation flow rates, and image qualities were investigated. The models examined were Innovex US31-B12, OTU-100RR, Redpine RP-U-C12, Sciavita SUV-2A-B, and Seplou URS3016E. Their performance was also compared with that of a reusable flexible ureteroscope, Olympus URV-F. RESULTS: The OTU device had the highest degrees of deflection and the smallest loop diameter of the disposable ureteroscopes. The single-use ureteroscopes had identical image resolutions at a distance of 1 cm. The Innovex and Redpine devices had the best color representation. CONCLUSIONS: Of the tested disposable ureteroscopes, the OTU device had the best mechanical attributes, given its small loop diameter, high deflection angles, and low irrigation flow loss. As to their optical properties, the resolutions of all 5 single-use models were identical at an image distance of 1 cm.

Integration of Patient-Reported Outcome Data Collected Via Web Applications and Mobile Apps Into a Nation-Wide COVID-19 Research Platform Using Fast Healthcare Interoperability Resources: Development Study.

BACKGROUND: The Network University Medicine projects are an important part of the German COVID-19 research infrastructure. They comprise 2 subprojects: COVID-19 Data Exchange (CODEX) and Coordination on Mobile Pandemic Apps Best Practice and Solution Sharing (COMPASS). CODEX provides a centralized and secure data storage platform for research data, whereas in COMPASS, expert panels were gathered to develop a reference app framework for capturing patient-reported outcomes (PROs) that can be used by any researcher. OBJECTIVE: Our study aims to integrate the data collected with the COMPASS reference app framework into the central CODEX platform, so that they can be used by secondary researchers. Although both projects used the Fast Healthcare Interoperability Resources (FHIR) standard, it was not used in a way that data could be shared directly. Given the short time frame and the parallel developments within the CODEX platform, a pragmatic and robust solution for an interface component was required. METHODS: We have developed a means to facilitate and promote the use of the German Corona Consensus (GECCO) data set, a core data set for COVID-19 research in Germany. In this way, we ensured semantic interoperability for the app-collected PRO data with the COMPASS app. We also developed an interface component to sustain syntactic interoperability. RESULTS: The use of different FHIR types by the COMPASS reference app framework (the general-purpose FHIR Questionnaire) and the CODEX platform (eg, Patient, Condition, and Observation) was found to be the most significant obstacle. Therefore, we developed an interface component that realigns the Questionnaire items with the corresponding items in the GECCO data set and provides the correct resources for the CODEX platform. We extended the existing COMPASS questionnaire editor with an import function for GECCO items, which also tags them for the interface component. This ensures syntactic interoperability and eases the reuse of the GECCO data set for researchers. CONCLUSIONS: This paper shows how PRO data, which are collected across various studies conducted by different researchers, can be captured in a research-compatible way. This means that the data can be shared with a central research infrastructure and be reused by other researchers to gain more insights about COVID-19 and its sequelae.

How to choose between single-use and reusable medical materials for sustainable nursing: Methodological lessons learned from a national study.

AIM: To demonstrate and reflect upon the methodological lessons by which healthcare organizations can address questions of environmental sustainability related to single-use healthcare materials. DESIGN: A cross-sectional multi-centre study in hospitals was performed, followed by an exploratory analysis of the sustainability of commonly used healthcare materials. METHODS: A hospital survey was conducted to collect the procurement data for single-use medical materials. Based on consumption and cost, five single-use medical materials with sustainable alternatives were selected using different reuse strategies. Single-use and reusable materials were assessed through an exploratory literature review and document study based on four parameters: environmental sustainability, safety, cost and efficiency. RESULTS: A pragmatic method emerged from this study, providing healthcare facilities with tools to select environmentally sustainable alternatives to replace single-use options. First, an inventory of single-use medical materials consumed was collected. Next, single-use materials were prioritized for further study based on criteria such as cost, volume of the material, feasibility and input of stakeholders. We then analysed the prioritized single-use materials and their alternatives based on life cycle assessments or available information on their different life stages. Finally, we assessed safety, costs and efficiency related to the process following the use of the medical material. CONCLUSION: This pragmatic method can guide healthcare institutions in making the most sustainable choices of medical materials and achieving sustainability goals within their institutions and nationwide. IMPACT: Patient care involves a large consumption of single-use medical materials with considerable environmental impact. A pragmatic method was developed to guide healthcare institutions in making the most sustainable choices regarding the use of single-use healthcare materials. Healthcare institutions, ideally represented by a green team including nurses and other relevant professionals, can use this method to reduce the use of single-use medical materials, thereby yielding positive outcomes for the entire population. PATIENT OR PUBLIC CONTRIBUTION: No patient or public contribution.

An easily fabricated nanoporous Au membrane in drug detection with reusable functionality and high SERS performance.

A method for detecting methamphetamine (MET), ketamine (KET), and morphine (MOP) molecules is presented using a reusable substrate based on SERS. The SERS substrate was prepared by etching the Au/Ag alloy film to synthesize a nanoporous Au membrane (AuNPM). By optimizing the preparation conditions and using rhodamine 6G (R6G) as an analyte, the AuNPM exhibited good SERS performance with a limit of detection (LOD) of 10-9 mol L-1. A competitive immunoassay category has been applied to the detection of MET, KET, and MOP. The MET, KET, and MOP antigens were functionalized on the surface of the AuNPM to specifically bind to the related drug antibodies. The Au nanoparticles (AuNPs) modified with 4-mercaptobenzoic acid (4-MBA) and antibodies against MET, KET, and MOP were used as nanotags. The 4-MBA served as the reporting molecule and drug antibodies were used to bind to free drug molecules in the target solution. The mixture of nanotags and target solution was dropped onto the antigen-modified AuNPM (antigen/AuNPM), and the free nanotags bind to the antigen/AuNPM. By comparing the SERS intensity of 4-MBA with the presence or absence of drug molecules, the drugs were qualitatively and quantitatively identified. Through this category, the LODs for detecting MET, KET, and MOP were 0.1, 1, and 1 ng mL-1, respectively. This study proposes an effective method for constructing SERS-based detection of drug molecules with good potential for practical applications.

Reusable graphite-based electrochemical sensors for L-dopa and dopamine detection.

A fully reusable electrochemical device is proposed for the first time made from laser cutting and a homemade conductive ink composed of carbon and nail polish. As a sensor substrate, we applied polymethyl methacrylate, which allows the surface to be renewed by simply removing and reapplying a new layer of ink. In addition to the ease of renewing the sensor's conductive surface, the design of the device has allowed for the integration of different forms of analysis. The determination of L-Dopa was performed using DPV, which presented a linear response range between 5.0 and 1000.0 µmol L-1, and a LOD of 0.11 µmol L-1. For dopamine, a flow injection analysis system was employed, and using the amperometric technique measurements were performed with a linear ranging from 2.0 to 100.0 µmol L-1 and a LOD of 0.26 µmol L-1. To demonstrate its applicability, the device was used in the quantification of analytes in pharmaceutical drug and synthetic urine samples.

Waste management in the operating theatre.

INTRODUCTION: Poor clinical waste management and its effect on the environment is an increasingly recognised concern for global healthcare systems. Approximately two thirds of waste produced in healthcare is from the operating theatre. In the Republic of Ireland, an estimated 580,977 tonnes of hazardous waste was produced in 2019. The cost of incineration of this hazardous waste is approximately €2,125 per tonne and €935 per tonne for sterilisation. Pollution from incineration is substantial and harmful. METHODS: A literature review was performed on the topic of hospital waste management, specifically looking at the Republic of Ireland. A comparison could then be drawn between Ireland, Europe and the United States of America. Observation of our current operating theatre environment and practices were carried out. DISCUSSION: An increased focus towards sustainability and reusable equipment means that there is potentially a decreased amount of waste for disposal, but an increase in the process of sterilisation. Approximately 66% of healthcare related waste is inappropriately contaminated, meaning that significant savings are possible if correct segregation and recycling were to occur. An increase in the amount of bins, identification labels above bins and education of staff results in an increased likelihood of successful segregation of waste. Clear and concise hospital guidelines of what is considered hazardous versus non-hazardous waste will decrease the amount of inappropriately disposed items.

Efficient AAV9 Purification Using a Single-Step AAV9 Magnetic Affinity Beads Isolation.

Adeno-associated viruses (AAVs) have emerged as promising tools for gene therapy due to their safety and efficacy in delivering therapeutic genes or gene editing sequences to various tissues and organs. AAV serotype 9 (AAV9), among AAV serotypes, stands out for its ability to efficiently target multiple tissues, thus holding significant potential for clinical applications. However, existing methods for purifying AAVs are cumbersome, expensive, and often yield inconsistent results. In this study, we explore a novel purification strategy utilizing Dynabeads™ CaptureSelect™ magnetic beads. The AAV9 magnetic beads capture AAV9 with high specificity and recovery between 70 and 90%, whereas the AAVX magnetic beads did not bind to the AAV9. Through continuous interaction with AAVs in solution, these beads offer enhanced clearance of genomic DNA and plasmids even in the absence of endonuclease. The beads could be regenerated at least eight times, and the used beads could be stored for up to six months and reused without a significant reduction in recovery. The potency of the AAV9-purified vectors in vivo was comparable to that of iodixanol purified vectors.

[Research on the Quality Control of Routine Reusable Pipeline and Disposable Pipeline of Ventilator].

Objective: To explore the effect of routine reusable pipeline and disposable pipeline on ventilator quality control results. Methods: 17 ventilators were randomly selected to conduct quality control using routine reusable pipeline and disposable pipeline respectively. Quality control data were recorded and then paired t-test method was used to analyze whether the difference between the two pipelines was significant or not. Results: There were no significant differences in respiratory rate, tidal volume and end airway pressure between the two types of pipes ( P＞0.05). The airway peak pressure of routine reusable pipeline was significantly higher than disposable pipeline ( P＜0.05), but the difference was very small, only about 0.2 mbar which would not affect the conclusion of quality control. Conclusion: Quality control of ventilator is not affected by routine reusable pipeline and disposable pipeline, which can be replaced by each other.