Microliquid/Liquid Interfacial Sensors: Biomimetic Investigation of Transmembrane Mechanisms and Real-Time Determinations of Clemastine, Cyproheptadine, Epinastine, Cetirizine, and Desloratadine.

Antihistamines relieve allergic symptoms by inhibiting the action of histamine. Further understanding of antihistamine transmembrane mechanisms and optimizing the selectivity and real-time monitoring capabilities of drug sensors is necessary. In this study, a micrometer liquid/liquid (L/L) interfacial sensor has served as a biomimetic membrane to investigate the mechanism of interfacial transfer of five antihistamines, i.e., clemastine (CLE), cyproheptadine (CYP), epinastine (EPI), desloratadine (DSL), and cetirizine (CET), and realize the real-time determinations. Cyclic voltammetry (CV) and differential pulse voltammetry (DPV) techniques have been used to uncover the electrochemical transfer behavior of the five antihistamines at the L/L interface. Additionally, finite element simulations (FEMs) have been employed to reveal the thermodynamics and kinetics of the process. Visualization of antihistamine partitioning in two phases at different pH values can be realized by ion partition diagrams (IPDs). The IPDs also reveal the transfer mechanism at the L/L interface and provide effective lipophilicity at different pH values. Real-time determinations of these antihistamines have been achieved through potentiostatic chronoamperometry (I-t), exhibiting good selectivity with the addition of nine common organic or inorganic compounds in living organisms and revealing the potential for in vivo pharmacokinetics. Besides providing a satisfactory surrogate for studying the transmembrane mechanism of antihistamines, this work also sheds light on micro- and nano L/L interfacial sensors for in vivo analysis of pharmacokinetics at a single-cell or single-organelle level.

Spectroscopic interactions of non-insulin-dependent diabetes mellitus with levocetirizine.

Non insulin dependent diabetes mellitus (NIDDM) drugs such as glibenclamide and metformin is employed to heterogeneous disorder characterized by alteration in production of glucose due to impairment of both insulin secretion and insulin action. These patients might suffer with allergic rhinitis and in this case, there is a possibility to maintain patient on levocetirizine, an anti-allergic drug commonly used in rhinitis. The object of the present study is to detect possible interaction between glibenclamide or metformin with levocetirizine Current study was performed using UV spectroscopic technique sing simultaneous equation in pH simulated to gastric juice (pH 1), pH 4, pH 7.4 and in pH 9. All drugs followed Beer Lambert's Law. Results showed that glibenclamide and metformin can increase or decrease availability of levocetirizine and in the same way levocetirizine can alter availabilities of glibenclamide and metformin in different pH. Hence, drug interaction between glibenclamide or metformin with levocetirizne occurred. This may be due to his may be due to the charge transfer or binding capabilities of these drugs which resulted in significantly changed availability of NIDDIM as well as levocetirizine. Therefore, co-administration of these drugs should be avoided and furtherinvestigations at clinical and pre-clinical levels should be done.

Distinct binding of cetirizine enantiomers to human serum albumin and the human histamine receptor H1.

Cetirizine, a major metabolite of hydroxyzine, became a marketed second-generation H1 antihistamine that is orally active and has a rapid onset of action, long duration of effects and a very good safety record at recommended doses. The approved drug is a racemic mixture of (S)-cetirizine and (R)-cetirizine, the latter being the levorotary enantiomer that also exists in the market as a third-generation, non-sedating and highly selective antihistamine. Both enantiomers bind tightly to the human histamine H1 receptor (hH1R) and behave as inverse agonists but the affinity and residence time of (R)-cetirizine are greater than those of (S)-cetirizine. In blood plasma, cetirizine exists in the zwitterionic form and more than 90% of the circulating drug is bound to human serum albumin (HSA), which acts as an inactive reservoir. Independent X-ray crystallographic work has solved the structure of the hH1R:doxepin complex and has identified two drug-binding sites for cetirizine on equine serum albumin (ESA). Given this background, we decided to model a membrane-embedded hH1R in complex with either (R)- or (S)-cetirizine and also the complexes of both ESA and HSA with these two enantiomeric drugs to analyze possible differences in binding modes between enantiomers and also among targets. The ensuing molecular dynamics simulations in explicit solvent and additional computational chemistry calculations provided structural and energetic information about all of these complexes that is normally beyond current experimental possibilities. Overall, we found very good agreement between our binding energy estimates and extant biochemical and pharmacological evidence. A much higher degree of solvent exposure in the cetirizine-binding site(s) of HSA and ESA relative to the more occluded orthosteric binding site in hH1R is translated into larger positional fluctuations and considerably lower affinities for these two nonspecific targets. Whereas it is demonstrated that the two known pockets in ESA provide enough stability for cetirizine binding, only one such site does so in HSA due to a number of amino acid replacements. At the histamine-binding site in hH1R, the distinct interactions established between the phenyl and chlorophenyl moieties of the two enantiomers with the amino acids lining up the pocket and between their free carboxylates and Lys179 in the second extracellular loop account for the improved pharmacological profile of (R)-cetirizine.

Development of medicated chewing gum of taste masked levocetirizine dihydrochloride using different gum bases: in vitro and in vivo evaluation.

Objective: The aim of this study was to develop medicated chewing gum (MCG) formulation for taste-masked levocetirizine dihydrochloride (LCZ) that can provide fast drug release into the salivary fluid.Methods: Taste-masked LCZ was first prepared by two methods: cyclodextrin complexation using Kleptose or Captisol and formation of drug resin complex using Kyron T-154 or Kyron T-314 to overcome poor LCZ palatability. MCGs were then prepared using the taste-masked drug, gum base (Artica-T, Chicle, or Health In Gum (HIG), plasticizer (glycerol or soy lecithin at 6 or 8% of the final gum weight). The developed MCGs were evaluated for physical properties, content uniformity, and drug release. Best release MCGs were evaluated thermally to investigate the plasticizer effectiveness and for ex vivo chew out study to confirm adequate drug release. Drug bioavailability was determined for selected formula compared to commercial tablets.Results: Based on taste-masking efficiency, drug/Kleptose complex (1:3 molar ratio) was chosen for incorporation into chewing gums. Physical properties and drug release showed that gum base type, plasticizer type, and level affected not only physical properties but also drug release from MCGs. Thermal study showed decreased glass transition temperature (Tg) with increased plasticizer level. Chew out study confirmed almost complete drug release after a few minutes of chewing. Pharmacokinetic results showed shorter tmax (0.585 vs. 1.375 h) and higher Cmax (0.113 vs. 0.0765 µg/mL) for MCGs than conventional tablets.Conclusion: Results provided evidence that MCGs could be a better alternative to conventional tablet formulations with improved bioavailability and enhanced palatability.

Development of nanoemulsion gel drug delivery systems of cetirizine; factorial optimisation of composition, in vitro evaluation and clinical study.

Aim: This work aimed to develop topical nanoemulsion gels of cetirizine, a second-generation antihistamine, to avoid its oral intake drawbacks and enhance skin permeation.Methods: Cetirizine nanoemulsions were formulated and characterised for their particle size, polydispersity index, zeta potential, drug release and drug permeation through rat skin. The optimised formulation, obtained using 23 full factorial design, was incorporated in carbopol and chitosan gels and evaluated clinically for urticaria treatment.Results: The optimised formulation had particle size of 32.015 ± 1.87 nm, polydispersity index of 0.29 ± 0.04, zeta potential of -19.31 ± 0.43 mV, cetirizine percent released of 98.50 ± 1.23% and permeability coefficient of 7.65 cm.h-1. Cetirizine nanoemulsion gels were more effective than their control gels in urticaria treatment with significant decrease in the degree of wheals and itching and higher recovery percent.Conclusion: Cetirizine nanoemulsion topical gels are expected to be a rational and effective tool for avoiding cetirizine oral side effects and targeting the affected skin.

Simultaneous bioanalysis and pharmacokinetic interaction study of acebrophylline, levocetirizine and pranlukast in Sprague-Dawley rats.

The combination of acebrophylline (ABP), levocetirizine (LCZ) and pranlukast (PRN) is used to treat allergic rhinitis, asthma, hay-fever and other conditions where patients experience difficulty in breathing. This study was carried out with the aim of developing and validating a reverse-phase high-performance liquid chromatographic bioanalytical method to simultaneously quantitate ABP, LCZ and PRN in rat plasma. The objective also includes determination of the pharmacokinetic interaction of these three drugs after administration via the oral route after individual and combination treatment in rat. Optimum resolution between the analytes was observed with a C18 Kinetex column (250 mm × 4.6 mm × 5 µm). The chromatography was performed in a gradient elution mode with a 1 mL/min flow rate. The calibration curves were linear over the concentration range of 100-1600 ng/mL. The intra- and inter-day precision and accuracy were found to be within acceptable limits as specified in US Food and Drug Administration guideline for bioanalytical method validation. The analytes were stable on the bench-top (8 h), after three freeze-thaw cycles, in the autosampler (8 h) and as a dry extract (-80°C for 48 h). The statistical results of the pharmacokinetic study in Sprague-Dawley rats showed a significant change in pharmacokinetic parameters for PRN upon co-administration of the three drugs.

Maltodextrin-modified graphene oxide for improved enantiomeric separation of six basic chiral drugs by open-tubular capillary electrochromatography.

An electrochromatographic capillary was modified with graphene oxide (GO), and the coating was characterized by scanning electron microscopy, energy dispersive X-ray spectrometry, and Fourier transform infrared spectra. By utilizing maltodextrin (MD) as the chiral selector, the basic chiral drugs nefopam (NEF), amlodipine (AML), citalopram hydrobromide (CIT), econazole (ECO), ketoconazole (KET) and cetirizine hydrochloride (CET) can be enantiomerically separated on this CEC. Compared with an uncoated silica capillary, the resolutions are markedly improved (AML: 0.32 → 1.45; ECO: 0.55 → 1.89; KET: 0.88 → 4.77; CET: 0.81 → 2.46; NEF: 1.46 → 2.83; CIT: 1.77 → 4.38). Molecular modeling was applied to demonstrate the mechanism of enantioseparation, which showed a good agreement with the experimental results. Graphical abstractSchematic representation of the preparation of graphene oxide-modified capillary (GO@capillary) for enantioseparation of drug enantiomers. The monolayered GO was used as the coating of the GO@capillary. Then the capillary was applied to construct capillary electrochromatography system with maltodextrin for separation of basic chiral drugs.

Formulation and characterization of oral rapid disintegrating tablets of levocetirizine.

BACKGROUND: Levocetirizine, active R (-) enantiomer of cetirizine, is an orally active and selective H1 receptor antagonist used medically as an anti-allergic. Allergic rhinitis is a symptomatic disorder of the nose induced by inflammation mediated by immunoglobulin E (IgE) in the membrane lining the nose after allergen exposure. OBJECTIVES: The purpose of the present study was to prepare rapidly disintegrating tablets of levocetirizine after its complexation with ß-cyclodextrin (ß-CD). MATERIAL AND METHODS: Levocetirizine-ß-CD complex tablets were prepared by direct compression technique using 3 synthetic superdisintegrants in different proportions. Development of the formulation in the present study was mainly based on the concentration of superdisintegrants and the properties of the drug. Nine batches of tablets were formulated and evaluated for various parameters: drug content, weight variation, water absorption ratio, wetting time, in vitro disintegration, hardness, friability, thickness uniformity, and in vitro dissolution. RESULTS: A Fourier-transform infrared spectroscopy (FTIR) study showed that there were no significant interactions between the drug and the excipients. The prepared tablets were good in appearance and showed acceptable results for hardness and friability. The in vitro disintegrating time of the formulated tablet batches was found to be 15-35 s percentage and the drug content of tablets in all formulations was found to be between 90-102%, which complied with the limits established in the United States Pharmacopeia. CONCLUSIONS: Complexation of levocetirizine with ß-CD significantly improves the solubility of the drug. The disintegration time of the tablets was decreased with an increase in superdisintegrant amount. The tablets (batch CPX5) had a minimum disintegration time of 20 s and 99.99% of the drug was released within 10 min.

Estimation of simvastatin and cetirizine by RP-LC method: Application to freeze and thaw (FT) stability studies.

Sensitive, simple, reliable and rapid HPLC technique for the estimation of simvastatin (SMV) and cetirizine has been designed in this study. The chromatographic conditions were set using Shimadzu LC-10 AT VP pump, with UV detector (SPD-10 AV-VP). System integration was performed with CBM-102 (Bus Module). Partitioning of components was attained with pre-packed C-18 column of Purospher Star (5 µm, 250 x 4.6 mm) at ambient conditions. Injected volume of sample was 10 µl. Mobile phase was composed of 50:50 v/v ratio of Acetonitrile/water (pH 3.0 adjusted with ortho-phosphoric acid) having 2 ml/minutes rate of flow. Compounds were detected in UV region at 225 nm. Percent Recovery of simvastatin was observed in the range of 98-102%. All results were found in accept table range of specification. The projected method is consistent, specific, precise, and rapid, that can be employed to quantitate the SMV along with cetirizine HCl. It was estimated by 3 successive cycles of freeze and thaw stability. Results of FT samples were found within accept table limits the method was developed and validated in raw materials, bulk formulations and final drug products.

Development of Oral Flexible Tablet (OFT) Formulation for Pediatric and Geriatric Patients: a Novel Age-Appropriate Formulation Platform.

Development of palatable formulations for pediatric and geriatric patients involves various challenges. However, an innovative development with beneficial characteristics of marketed formulations in a single formulation platform was attempted. The goal of this research was to develop solid oral flexible tablets (OFTs) as a platform for pediatrics and geriatrics as oral delivery is the most convenient and widely used mode of drug administration. For this purpose, a flexible tablet formulation using cetirizine hydrochloride as model stability labile class 1 and 3 drug as per the Biopharmaceutical Classification System was developed. Betadex, Eudragit E100, and polacrilex resin were evaluated as taste masking agents. Development work focused on excipient selection, formulation processing, characterization methods, stability, and palatability testing. Formulation with a cetirizine-to-polacrilex ratio of 1:2 to 1:3 showed robust physical strength with friability of 0.1% (w/w), rapid in vitro dispersion within 30 s in 2-6 ml of water, and 0.2% of total organic and elemental impurities. Polacrilex resin formulation shows immediate drug release within 30 min in gastric media, better taste masking, and acceptable stability. Hence, it is concluded that ion exchange resins can be appropriately used to develop taste-masked, rapidly dispersible, and stable tablet formulations with tailored drug release suitable for pediatrics and geriatrics. Flexible formulations can be consumed as swallowable, orally disintegrating, chewable, and as dispersible tablets. Flexibility in dose administration would improve compliance in pediatrics and geriatrics. This drug development approach using ion exchange resins can be a platform for formulating solid oral flexible drug products with low to medium doses.

Pediatric Dispersible Tablets: a Modular Approach for Rapid Prototyping.

PURPOSE: The design of pediatric formulations is challenging. Solid dosage forms for children have to meet the needs of different ages, e.g. high number of dosing increments and strengths. A modular formulation strategy offering the possibility of rapid prototyping was applied. Different tablet compositions and the resulting tablet characteristics were investigated for dispersible tablets using customized analytical methods. METHODS: Fluid bed granules were blended with extragranular components, and compressed to tablets. Disintegration behavior was studied with a Texture Analyzer and a Tensiometer. RESULTS: Methods for determination of disintegration time and water uptake of tablets were developed with a Texture Analyzer, and a Tensiometer, respectively. Twenty-two different tablet formulations were prepared and analyzed with respect to disintegration time, hardness, friability, and viscosity. Multivariate data analysis revealed a high impact of type and amount of viscosity enhancer on the disintegration behavior of tablets. An optimized formulation was selected with a disintegration time of 24 s. CONCLUSION: Methods providing additional information on the disintegration behavior of dispersible tablets compared to standard pharmacopoeia methods were established. Selecting the right type and level of viscosity enhancer and superdisintegrant was critical for developing pediatric tablets with a disintegration time of less than 30 s but still pleasant mouth feel.

Non-target impurity profiling of marketplace Cetirizine using high-resolution mass spectrometry and multivariate data analysis.

RATIONALE: As always, drug impurity is the first concern of medication safety. The quality of pre- and post-marketed drugs is estimated through systematic analysis of potential hazardous substances by impurity profiling. Impurity profile is the general name of all unwanted materials which may affect the purity of an active pharmaceutical ingredient (API). The safety of original drugs is guaranteed by an enormous amount of animal experiments and clinical research while the safety of generic drugs should also be ensured by comparative analysis for consistency evaluation. The significantly differential impurities between them should be focused on and the toxicity should be further estimated if necessary. Herein, we take a marketplace drug named Cetirizine as an example to investigate if there was a method which could effectively discover the potential markers among Cetirizine tablets with different brands and describe specific impurity profiling which makes the unknown brand of Cetirizine tablets predictable. METHODS: Liquid chromatography coupled with high-resolution mass spectrometry (LC/HRMS) was applied to capture the characteristic features of the impurity profile for three brands of marketplace Cetirizine tablets using full scan data-dependent MS/MS scan mode (FS-ddMS(2) ). RESULTS: Unsupervised learning: principal component analysis (PCA) and supervised learning: consensus orthogonal partial least squares discriminant analysis (OPLS-DA) were utilized to reveal the essential character of Cetirizine impurity profile; 16 differential impurities were finally found, their structures were speculated by HRMS(2) data. CONCLUSIONS: The cause of formation was further elucidated which gave a suggestion for production process optimization. Copyright © 2016 John Wiley & Sons, Ltd.

35Cl dynamic nuclear polarization solid-state NMR of active pharmaceutical ingredients.

In this work, we show how to obtain efficient dynamic nuclear polarization (DNP) enhanced 35Cl solid-state NMR (SSNMR) spectra at 9.4 T and demonstrate how they can be used to characterize the molecular-level structure of hydrochloride salts of active pharmaceutical ingredients (APIs) in both bulk and low wt% API dosage forms. 35Cl SSNMR central-transition powder patterns of chloride ions are typically tens to hundreds of kHz in breadth, and most cannot be excited uniformly with high-power rectangular pulses or acquired under conditions of magic-angle spinning (MAS). Herein, we demonstrate the combination of DNP and 1H-35Cl broadband adiabatic inversion cross polarization (BRAIN-CP) experiments for the acquisition of high quality wideline spectra of APIs under static sample conditions, and obtain signals up to 50 times greater than in spectra acquired without the use of DNP at 100 K. We report a new protocol, called spinning-on spinning-off (SOSO) acquisition, where MAS is applied during part of the polarization delay to increase the DNP enhancements and then the MAS rotation is stopped so that a wideline 35Cl NMR powder pattern free from the effects of spinning sidebands can be acquired under static conditions. This method provides an additional two-fold signal enhancement compared to DNP-enhanced SSNMR spectra acquired under purely static conditions. DNP-enhanced 35Cl experiments are used to characterize APIs in bulk and dosage forms with Cl contents as low as 0.45 wt%. These results are compared to DNP-enhanced 1H-13C CP/MAS spectra of APIs in dosage forms, which are often hindered by interfering signals arising from the binders, fillers and other excipient materials.

A Novel Two-Step Liquid-Liquid Extraction Procedure Combined with Stationary Phase Immobilized Human Serum Albumin for the Chiral Separation of Cetirizine Enantiomers along with M and P Parabens.

The research into the separation of drug enantiomers is closely related to the safety and efficiency of the drugs. The aim of this study was to develop a simple and validated HPLC method to analyze cetirizine enantiomers. In the case of liquid dosage forms, besides the active substance in large amounts there are usually also inactive ingredients such as methyl- and propylparaben. Unfortunately, these compounds can interfere with the analyte, inter alia during chiral separation of the analyte enantiomers. The proposed innovative two-step liquid-liquid extraction procedure allowed for the determination of cetirizine enantiomers (along with M and P parabens) also in liquid dosage forms. The main focus of this study was the chromatographic activity of cetirizine dihydrochloride on the proteinate-based chiral stationary phase. The chromatographic separation of cetirizine enantiomers was performed on an immobilized human serum albumin (HSA) column for the first time. Measurements were performed at a wavelength of 227 nm. Under optimal conditions, baseline separation of two enantiomers was obtained with 1.43 enantioseparation factor (α) and 1.82 resolution (Rs). Finally, the proposed method was successfully applied to the selected pharmaceutical formulations.

Statistical optimization of controlled release microspheres containing cetirizine hydrochloride as a model for water soluble drugs.

The purpose was to improve the encapsulation efficiency of cetirizine hydrochloride (CTZ) microspheres as a model for water soluble drugs and control its release by applying response surface methodology. A 3(3) Box-Behnken design was used to determine the effect of drug/polymer ratio (X1), surfactant concentration (X2) and stirring speed (X3), on the mean particle size (Y1), percentage encapsulation efficiency (Y2) and cumulative percent drug released for 12 h (Y3). Emulsion solvent evaporation (ESE) technique was applied utilizing Eudragit RS100 as coating polymer and span 80 as surfactant. All formulations were evaluated for micromeritic properties and morphologically characterized by scanning electron microscopy (SEM). The relative bioavailability of the optimized microspheres was compared with CTZ marketed product after oral administration on healthy human volunteers using a double blind, randomized, cross-over design. The results revealed that the mean particle sizes of the microspheres ranged from 62 to 348 µm and the efficiency of entrapment ranged from 36.3% to 70.1%. The optimized CTZ microspheres exhibited a slow and controlled release over 12 h. The pharmacokinetic data of optimized CTZ microspheres showed prolonged tmax, decreased Cmax and AUC0-∞ value of 3309 ± 211 ng h/ml indicating improved relative bioavailability by 169.4% compared with marketed tablets.

Enantiomeric separation and simulation studies of pheniramine, oxybutynin, cetirizine, and brinzolamide chiral drugs on amylose-based columns.

Solid phase extraction (SPE)-chiral separation of the important drugs pheniramine, oxybutynin, cetirizine, and brinzolamide was achieved on the C18 cartridge and AmyCoat (150 x 46 mm) and Chiralpak AD (25 cm x 0.46 cm id) chiral columns in human plasma. Pheniramine, oxybutynin, cetirizine, and brinzolamide were resolved using n-hexane-2-PrOH-DEA (85:15:0.1, v/v), n-hexane-2-PrOH-DEA (80:20:0.1, v/v), n-hexane-2-PrOH-DEA (70:30:0.2, v/v), and n-hexane-2-propanol (90:10, v/v) as mobile phases. The separation was carried out at 25 ± 1 ºC temperature with detection at 225 nm for cetirizine and oxybutynin and 220 nm for pheniramine and brinzolamide. The flow rates of the mobile phases were 0.5 mL min(-1). The retention factors of pheniramine, oxybutynin, cetirizine and brinzolamide were 3.25 and 4.34, 4.76 and 5.64, 6.10 and 6.60, and 1.64 and 2.01, respectively. The separation factors of these drugs were 1.33, 1.18, 1.09 and 1.20 while their resolutions factors were 1.09, 1.45, 1.63 and 1.25, and 1.15, respectively. The absolute configurations of the eluted enantiomers of the reported drugs were determined by simulation studies. It was observed that the order of enantiomers elution of the reported drugs was S-pheniramine > R-pheniramine; R-oxybutynin > S-oxybutynin; S-cetirizine > R-cetirizine; and S-brinzolamide > R-brinzolamide. The mechanism of separation was also determined at the supramolecular level by considering interactions and modeling results. The reported SPE-chiral high-performance liquid chromatography (HPLC) methods are suitable for the enantiomeric analyses of these drugs in any biological sample. In addition, simulation studies may be used to determine the absolute configuration of the first and second eluted enantiomers.

Ethosomes-based topical delivery system of antihistaminic drug for treatment of skin allergies.

Cetirizine is indicated for the treatment of allergic conditions such as insect bites and stings, atopic and contact dermatitis, eczema, urticaria. This investigation deals with development of a novel ethosome-based topical formulation of cetirizine dihydrochloride for effective delivery. The optimised formulation consisting of drug, phospholipon 90 G™ and ethanol was characterised for drug content, entrapment efficiency, pH, vesicular size, spreadability and rheological behaviour. The ex vivo permeation studies through mice skin showed highest permeation flux (16.300 ± 0.300 µg/h/cm(2)) and skin retention (20.686 ± 0.517 µg/cm(2)) for cetirizine-loaded ethosomal vesicles as compared to conventional formulations. The in vivo pharmacodynamic evaluation of optimised formulation was assessed against oxazolone-induced atopic dermatitis (AD) in mice. The parameters evaluated were reduction in scratching score, erythema score, skin hyperplasia and dermal eosinophil count. Our results suggest that ethosomes are effective carriers for dermal delivery of antihistaminic drug, cetirizine, for the treatment of AD.

Engineering of electrospun polycaprolactone/polyvinyl alcohol-collagen based 3D nano scaffolds and their drug release kinetics using cetirizine as a model drug.

Combining the versatility of electrospinning with the biocompatibility of Polycaprolactone and Collagen, this study aims to create advanced 3D nano scaffolds for effective drug delivery. Ceramic materials like hydroxyapatite (nHAp) are incorporated as bioactive agents in the fibers. Electrospun PCL (Polycaprolactone)/collagen nanofibers and PVA (Poly-vinyl alcohol)/collagen are promising tissue-engineering substitutes with high biocompatibility, low cytotoxicity, and great tensile strength. Small pores in these nanofibers play a major role in drug delivery system. Owing to its short half-life, limited solubility, restricted bioavailability as well as re-crystallization concerns, the application of Cetirizine (CIT) has found little relevance. Electrospun nanofibers impregnated with CIT provide an excellent solution to combat these limitations, yield sustained drug release along with hampering drug re-crystallization. CIT-loaded polyvinyl alcohol (PVA)/collagen (Col) and CIT-loaded PVA/Col/nHAp nanofibers were characterized and further CIT anti-crystallization as well as release behaviors were investigated. FESEM and HRTEM were used to observe the morphology of the as-synthesized nanofibers. FTIR spectroscopy, water contact angle measurement and drug release studies verified the differences in performance of CIT-loaded PVA/Col and PVA/Col/nHAp nanofibers. The release trend of CIT through these as-synthesized nanoscaffolds was analyzed by various kinetic models and exhibited sustained release of CIT for up to 96 h.

Dextrin-assisted gel electromembrane extraction of chiral drugs: Improving the extraction efficiency and investigation of enantioselectivity of extraction.

The present study investigates the use of dextrins (maltodextrin, ß-cyclodextrin, and hydroxypropyl-ß-cyclodextrin) to improve the efficiency of the agarose-based gel electromembrane extraction technique for extracting chiral basic drugs (citalopram, hydroxyzine, and cetirizine). Additionally, it examines the enantioselectivity of the extraction process for these drugs. To achieve these, dextrins were incorporated into either the sample solution, the membrane, or the acceptor solution, and then the extraction procedure was performed. Enantiomers were separated and analyzed using a capillary electrophoresis device equipped with a UV detector. The results obtained under the optimal extraction conditions (sample solution pH: 4.0, acceptor solution pH: 2.0, gel membrane pH: 3.0, agarose concentration: 3 % w/v, stirring rate: 1000 rpm, gel thickness: 4.4 mm, extraction voltage: 62.3 V, and extraction time: 32.1 min) indicated that incorporating dextrins into either the sample solution, membrane or the acceptor solution enhances extraction efficiency by 17.3-23.1 %. The most significant increase was observed when hydroxypropyl-ß-cyclodextrin was added to the acceptor solution. The findings indicated that the inclusion of hydroxypropyl-ß-cyclodextrin in the sample solution resulted in an enantioselective extraction, yielding an enantiomeric excess of 6.42-7.14 %. The proposed method showed a linear range of 5.0-2000 ng/mL for enantiomers of model drugs. The limit of detection and limit of quantification for all enantiomers were found to be < 4.5 ng/mL and <15.0 ng/mL, respectively. Intra- and inter-day RSDs (n = 4) were less than 10.8 %, and the relative errors were less than 3.2 % for all the enantiomers. Finally, the developed method was successfully applied to determine concentrations of enantiomers in a urine sample with relative recoveries of 96.8-99.2 %, indicating good reliability of the developed method.

Safety profile of enantiomers vs. racemic mixtures: it's the same?

WHAT IS ALREADY KNOWN ABOUT THIS SUBJECT: The physicochemical properties of racemates and stereoisomers of medicines can differ significantly, and this may affect the side-effect profile in addition to the pharmacokinetics and intended pharmacology. WHAT THIS STUDY ADDS: This is a study to investigate the profile of adverse drug reactions of racemic and enantiomeric forms of drugs. Our data suggest differences in the safety profile for ofloxacin and omeprazole. This area requires more work to investigate this for other compounds. AIMS: The objective was to investigate the safety profile of four drugs marketed as racemic and enantiomeric forms in France. METHODS: Data from the French PharmacoVigilance Data Base (January 2005 to June 2010) were analysed for four pairs of racemic/isomeric drugs. A case-noncase approach was used to measure the disproportionality of combination between adverse drug reaction (ADR) and exposure to drug. RESULTS: No significant difference in the number of ADRs was observed between Rac-cetirizine/(R)-cetirizine or Rac-citalopram/(S)-citalopram pairs. (S)-Omeprazole induced more haematological effects than Rac-omeprazole. Rac-Ofloxacin induced more haematological, renal and neuropsychiatric ADRs than (S)-ofloxacin, whereas levofloxacin was associated with more reports of musculoskeletal ADRs. CONCLUSIONS: The profile of ADRs could differ for some drugs marketed as racemic and enantiomeric forms. Further studies would be necessary to confirm these data.