Effect of calcium hydroxide mixed with preservatives on physicochemical characteristics and sensory shelf-life of corn tortilla.

BACKGROUND: The objective of the study was to evaluate the physicochemical characteristics and shelf-life of corn tortilla stored at room temperature (25 °C) using aw modifiers (propylene glycol and glycerol) and pH modifiers (fumaric acid and sodium benzoate) as preservatives combined with calcium hydroxide. Detection thresholds were used to determine the maximum preservative concentration and calcium hydroxide. Physicochemical characterization and sensory evaluation were used to determine the stability and sensory shelf-life of tortillas. RESULTS: Control, calcium hydroxide, calcium hydroxide + fumaric acid, calcium hydroxide + glycerol, calcium hydroxide + propylene glycol, and calcium hydroxide + sodium benzoate treatments had rounded half-lives of 1, 2, 1, 2, 2, and 2 days respectively. Glycerol combined with calcium hydroxide resulted in tortillas with lower pH variations over time. Mold presence was the critical attribute causing tortilla rejection. CONCLUSION: The use of aw modifiers had a better effect in preserving corn tortilla, as the concentration of pH modifiers at detection threshold levels was not able to reach an optimum performance when combined with calcium hydroxide. © 2021 Society of Chemical Industry.

The Usefulness of X-ray Diffraction and Thermal Analysis to Study Dietary Supplements Containing Iron.

X-ray powder diffraction (XRPD) and thermal analysis (differential scanning calorimetry/derivative of thermogravimetry (DSC/DTG)) are solid-state techniques that can be successfully used to identify and quantify various chemical compounds in polycrystalline mixtures, such as dietary supplements or drugs. In this work, 31 dietary supplements available on the Polish market that contain iron compounds, namely iron gluconate, fumarate, bisglycinate, citrate and pyrophosphate, were evaluated. The aim of the work was to identify iron compounds declared by the manufacturer as food supplements and to try to verify compliance with the manufacturer's claims. Studies performed by X-ray and thermal analysis confirmed that crystalline iron compounds (iron (II) gluconate, iron (II) fumarate), declared by the manufacturers, were present in the investigated dietary supplements. Iron (II) bisglycinate proved to be semi-crystalline. However, depending on the composition of the formulation, it was possible to identify this compound in the tested supplements. For amorphous iron compounds (iron (III) citrate and iron (III) pyrophosphate), the diffraction pattern does not have characteristic diffraction lines. Food supplements containing crystalline iron compounds have a melting point close to the melting point of pure iron compounds. The presence of excipients was found to affect the shapes and positions of the endothermic peaks significantly. Widening of endothermic peaks and changes in their position were observed, as well as exothermic peaks indicating crystallization of amorphous compounds. Weight loss was determined for all dietary supplements tested. Analysis of the DTG curves showed that the thermal decomposition of most food supplements takes place in several steps. The results obtained by a combination of both simple, relatively fast and reliable XRPD and DSC/DTG methods are helpful in determining phase composition, pharmaceutical abnormalities or by detecting the presence of the correct polymorphic form.

Effect of Different Drying Methods on the Nutritional Value of Hibiscus sabdariffa Calyces as Revealed by NMR Metabolomics.

Red mature calyces of Hibiscus sabdariffa were collected from 16 different locations in Meghalaya, India. Samples were processed using shade drying (SD) and tray drying (TD). NMR spectroscopy was used to assess the metabolic composition of the calyces. In this study, 18 polar metabolites were assigned using 1D and 2D NMR spectra, and 10 of them were quantified. Proximate analysis showed that the TD method is more efficient at reducing moisture and maintaining the ash content of the Hibiscus biomass. NMR metabolomics indicates that the metabolite composition significantly differs between SD and TD samples and is more stable in TD plant processing. The differences in post-harvest drying has a greater impact on the metabolite composition of Hibiscus than the plant location.

Cyclo(Phe-Pro) produced by Vibrio species passes through biological membranes by simple diffusion.

Cyclo(Phe-Pro) (cFP), produced by the Vibrio species, plays the dual roles of being a signaling molecule and a virulence factor. Acting modes of this compound have recently been characterized at the molecular level. Nevertheless, the method by which this compound passes across biological membranes remains obscure. Using radiolabeled cFP, we examined the kinetics of transport for this compound across membranes using V. vulnificus, Escherichia coli, and sheep red blood cells. We observed that cFP was taken up by these cells in a concentration-dependent manner and was not affected by the addition of the proton ionophore carbonyl cyanide m-chlorophenyl hydrazone (CCCP), suggesting that cFP is taken up by passive transport. The kinetics of uptake of cFP by the above three types of cells revealed no significant differences, indicating that no specific protein is involved in this process. When the intracellular accumulation of cFP in the tested cells was measured, the concentrations did not exhibit significant differences between the 1-min and 10-min time points after cFP was added to the culture. In contrast, the intracellular concentration of fumarate, which is well known to be taken up by cells via active transport, was significantly higher at the 10-min than at the 1-min time point after addition. Taken together, this study shows that cFP is a diffusible molecule that does not require energy for transportation across biological membranes, and that cFP does not need membrane machinery in order to cross membranes and consequently act as a virulence factor or signal. KEY POINTS: • Kinetics of cFP uptake into cells of V. vulnificus, E. coli, or RBS was studied. • The uptake was not saturated and required no energy, indicating passive transport. • The lack of cell specificity in cFP uptake means no specific protein is needed. • Therefore, the cFP moves across the biological membrane by simple diffusion.

Photoinducible Oncometabolite Detection.

Dysregulated metabolism can fuel cancer by altering the production of bioenergetic building blocks and directly stimulating oncogenic gene-expression programs. However, relatively few optical methods for the direct study of metabolites in cells exist. To address this need and facilitate new approaches to cancer treatment and diagnosis, herein we report an optimized chemical approach to detect the oncometabolite fumarate. Our strategy employs diaryl tetrazoles as cell-permeable photoinducible precursors to nitrileimines. Uncaging these species in cells and cell extracts enables them to undergo 1,3-dipolar cycloadditions with endogenous dipolarophile metabolites such as fumarate to form pyrazoline cycloadducts that can be readily detected by their intrinsic fluorescence. The ability to photolytically uncage diaryl tetrazoles provides greatly improved sensitivity relative to previous methods, and enables the facile detection of dysregulated fumarate metabolism through biochemical activity assays, intracellular imaging, and flow cytometry. Our studies showcase an intersection of bioorthogonal chemistry and metabolite reactivity that can be applied for biological profiling, imaging, and diagnostics.

Spatial modulation and cofactor engineering of key pathway enzymes for fumarate production in Candida glabrata.

Fumarate is a naturally occurring organic acid that is an intermediate of the tricarboxylic acid (TCA) cycle and has numerous applications in food, pharmaceutical, and chemical industries. However, microbial fumarate production from renewable feedstock is limited by the intrinsic inefficiency of its synthetic pathway caused by week metabolites transportation and cofactor imbalance. In this study, spatial modulation and cofactor engineering of key pathway enzymes in the reductive TCA pathway were performed for the development of a Candida glabrata strain capable of efficiently producing fumarate. Specifically, DNA-guided scaffold system was first constructed and optimized to modulate pyruvate carboxylase, malate dehydrogenase, and fumarase, increasing the fumarate titer from 0.18 to 11.3 g/L. Then, combinatorially tuning cofactor balance by controlling the expression strengths of adenosine diphosphate-dependent phosphoenolpyruvate carboxykinase and NAD+ -dependent formate dehydrogenase led to a large increase in fumarate production up to 18.5 g/L. Finally, the engineered strain T.G-4G-S(1:1:2) -P(M) -F(H) was able to produce 21.6 g/L fumarate in a 5-L batch bioreactor. This strategy described here, paves the way to develop efficient cell factories for the production of the other industrially useful chemicals.

Metabolomics and transcriptomics profiles reveal the dysregulation of the tricarboxylic acid cycle and related mechanisms in prostate cancer.

Genetic alterations drive metabolic reprograming to meet increased biosynthetic precursor and energy demands for cancer cell proliferation and survival in unfavorable environments. A systematic study of gene-metabolite regulatory networks and metabolic dysregulation should reveal the molecular mechanisms underlying prostate cancer (PCa) pathogenesis. Herein, we performed gas chromatography-mass spectrometry (GC-MS)-based metabolomics and RNA-seq analyses in prostate tumors and matched adjacent normal tissues (ANTs) to elucidate the molecular alterations and potential underlying regulatory mechanisms in PCa. Significant accumulation of metabolic intermediates and enrichment of genes in the tricarboxylic acid (TCA) cycle were observed in tumor tissues, indicating TCA cycle hyperactivation in PCa tissues. In addition, the levels of fumarate and malate were highly correlated with the Gleason score, tumor stage and expression of genes encoding related enzymes and were significantly related to the expression of genes involved in branched chain amino acid degradation. Using an integrated omics approach, we further revealed the potential anaplerotic routes from pyruvate, glutamine catabolism and branched chain amino acid (BCAA) degradation contributing to replenishing metabolites for TCA cycle. Integrated omics techniques enable the performance of network-based analyses to gain a comprehensive and in-depth understanding of PCa pathophysiology and may facilitate the development of new and effective therapeutic strategies.

Co-opting a Bioorthogonal Reaction for Oncometabolite Detection.

Dysregulated metabolism is a hallmark of many diseases, including cancer. Methods to fluorescently detect metabolites have the potential to enable new approaches to cancer detection and imaging. However, fluorescent sensing methods for naturally occurring cellular metabolites are relatively unexplored. Here we report the development of a chemical approach to detect the oncometabolite fumarate. Our strategy exploits a known bioorthogonal reaction, the 1,3-dipolar cycloaddition of nitrileimines and electron-poor olefins, to detect fumarate via fluorescent pyrazoline cycloadduct formation. We demonstrate hydrazonyl chlorides serve as readily accessible nitrileimine precursors, whose reactivity and spectral properties can be tuned to enable detection of fumarate and other dipolarophile metabolites. Finally, we show this reaction can be used to detect enzyme activity changes caused by mutations in fumarate hydratase, which underlie the familial cancer predisposition syndrome hereditary leiomyomatosis and renal cell cancer. Our studies define a novel intersection of bioorthogonal chemistry and metabolite reactivity that may be harnessed to enable biological profiling, imaging, and diagnostic applications.

Alternative energy production pathways in Taenia crassiceps cysticerci in vitro exposed to a benzimidazole derivative (RCB20).

Biochemical studies of benzimidazole derivatives are important to determine their mode of action and activity against parasites. The lack of antihelminthic alternatives to treat parasitic infections and albendazole resistance cases make the search for new antiparasitary drugs of utmost importance. The 6-chloro-5-(1-naphthyloxy)-2-(trifluoromethyl)-1H-benzimidazole (RCB20) is a benzimidazole derivative with promising effect. This study evaluated the effect of different concentrations of RCB20 in the alternative energetic pathway of in vitro Taenia crassiceps cysticerci. The parasites were in vitro exposed to 6.5 and 13 µM of RCB20 and albendazole sulfoxide (ABZSO). The quantification of acetate, acetoacetate, ß-hydroxybutyrate, fumarate and propionate was performed by high-performance liquid chromatography. The quantification of urea, creatinine and total proteins was performed by spectrophotometry. The increase in ß-hydroxybutyrate reflects the enhancement of the fatty acid oxidation in the treated groups. Volatile fatty acids secretion, acetate and propionate, was increased in the treated groups. The secretion mechanisms of the treated parasites were impaired due to organic acids increased concentrations in the cysticerci. It is possible to conclude that the metabolic effect on alternative energetic pathways is slightly increased in the parasites treated with RCB20 than the ones treated with ABZSO.

The Compositional HJ-Biplot-A New Approach to Identifying the Links among Bioactive Compounds of Tomatoes.

Tomatoes have been described as a functional food because of their particular composition of different bioactive compounds. In this study, the proximate composition, minerals and trace elements, and antioxidant compounds were determined in two tomato cultivars (Mariana and Dunkan) that were grown in Gran Canaria (Spain) either conventionally or hydroponically. Although compositional data of this type require being subjected to the specific statistical techniques of compositional analysis, this approach has not usually been considered in this context. In the present case, a compositional Mann-Whitney U test of the data showed significant differences for each factor (cultivar and cultivation system) in several of the compositional variables studied. For the differences between cultivars, these parameters were the protein, Mg, lycopene, ascorbic acid, citric acid, and fumaric acid contents. For the differences between cultivation systems, they were mainly those of the mineral and trace elements group. Although one-year data are insufficient to make clear relationship among compounds because more repetitions in several localities and years are necessary, the compositional HJ-biplot (in which the links provide estimates of the linear relationship among variables) results agreed with other scientific results about linear relationship among some compounds analyzed.

Colorimetric and fluorometric discrimination of geometrical isomers (maleic acid vs fumaric acid) with real-time detection of maleic acid in solution and food additives.

Heterobis imine Schiff base probe L is able to discriminate geometrical isomers (maleic acid vs fumaric acid) through sharp colorimetric as well as fluorogenic responses even conspicuous with the naked eye. Colorimetric as well as fluorogenic sensing of maleic acid among various carboxylic acids was also demonstrated in ethanol-buffer medium. Sensing behavior of L was corroborated by (1)H NMR spectra, mass spectrometry, and theoretical calculations. Subsequently sensing behavior of L was used to probe maleic acid in starch rich food samples.

Quantitative determination of dimethyl fumarate in silica gel by solid-phase microextraction/gas chromatography/mass spectrometry and ultrasound-assisted extraction/gas chromatography/mass spectrometry.

Dimethyl fumarate (DMF) is a chemical compound which has been added to silica gel bags used for preserving leather products during shipment. DMF has recently been singled out due to its ability to induce a number of medical problems in people which touch products contaminated by it. Its use as a biocide has been recently made illegal in Europe. Two different extraction techniques, namely ultrasound-assisted extraction (UAE) and solid-phase microextraction (SPME), both coupled with gas chromatography/mass spectrometry were applied to the quantitative determination of DMF in silica gel. Linearity of the methods, reproducibility and detection limits were determined. The two methods were applied to the quantification of DMF in thirty-four silica gel samples used as anti-mould agents in different leather products sold in Italy, and the obtained results were statistically compared.

[Determination of dimethyl fumarate in bakery food by d-SPE-HPLC-PDA].

OBJECTIVE: To establish a simple and rapid pretreatment method with dispersive solid phase extraction ( d-SPE) by HPLC for determination of dimethyl fumarate in bakery foods. METHODS: Dimethyl fumarate in samples was ultrasonically extracted by methanol, and cleaned up with d-SPE. Then, it was separated on C18 chromatographic column (4.6 mm x 25 mm, 5 µm) with a mixture of methanol--0.03 mol/L sodium acetate and 0.008 mol/L tetrabutyl ammonium bromide (40: 60, V/V) as mobile phase. The photodiode array detector was used in the determination under λ = 220 nm. RESULTS: In the linear range of 0.1 -25 µg/ml, the correlation coefficients was r > 0.999, and the average recoveries of the spiked samples were in the range of 82.8% - 107.5% with relative standard deviations (RSD) in the range of 3.30% - 7.30% (n = 6). The limit of detection ( LOD) was 0.4 mg/kg, and the limit of quantification was 1.0 mg/kg. CONCLUSION: The method is simple, rapid, sensitive and accurate, and suitable for determine dimethyl fumarate in bakery foods.

Simultaneous determination of aliskiren hemifumarate, amlodipine besylate, and hydrochlorothiazide in their triple mixture dosage form by capillary zone electrophoresis.

A novel, specific, reliable, and accurate capillary zone electrophoretic method was developed and validated for the simultaneous determination of aliskiren hemifumarate, amlodipine besylate, and hydrochlorothiazide in their triple mixture dosage form. Separation was carried out in a fused-silica capillary (57.0 cm total length and 50.0 cm effective length, 75.6 µm internal diameter) by applying a potential of 17 kV and a running buffer consisting of 40 mM phosphate buffer at pH 6.0 with UV detection at 245 nm. The method was suitably validated with respect to specificity, linearity, LOD, and LOQ, accuracy, precision, and robustness. The method showed good linearity in the ranges 1-10, 2.5-25, and 30-300 µg/mL with LODs of 0.11, 0.33, and 5.83 µg/mL for amlodipine besylate, hydrochlorothiazide, and aliskiren hemifumarate, respectively. The proposed method was successfully applied for the analysis of the studied drugs in their coformulated tablets. The results of the proposed method were statistically compared with those obtained by the RP-HPLC reference method revealing no significant differences in the performance of the methods regarding accuracy and precision.

Steady-state and synchronous spectrofluorimetric methods for simultaneous determination of aliskiren hemifumarate and amlodipine besylate in dosage forms.

Aliskiren hemifumarate (ALS) and amlodipine besylate (AML) were simultaneously determined by two different spectrofluorimetric techniques. The first technique depends on direct measurement of the steady-state fluorescence intensities of ALS and AML at 313 nm and 452 nm upon excitation at 290 and 375 nm, respectively, in a solvent composed of methanol and water (10: 90, v/v). The second technique utilizes synchronous fluorimetric quantitative screening of the emission spectra of ALS and AML at 272 and 366 nm, respectively using Δλ of 97 nm. Effects of different solvents and surfactants on relative fluorescence intensity were studied. The method was validated according to ICH guidelines. Linearity, accuracy and precision were found to be satisfactory in both techniques over the concentration ranges of 1-15 and 0.4-4 µg/mL for ALS and AML, respectively. In the first technique, limit of detection and limit of quantification were estimated and found to be 0.256 and 0.776 µg/mL for ALS as well as 0.067 and 0.204 µg/mL for AML, respectively. Also, limit of detection and limit of quantification were calculated in the synchronous method and found to be 0.293 and 0.887 µg/mL for ALS as well as 0.034 and 0.103 µg/mL for AML, respectively. The methods were successfully applied for the determination of the two drugs in their co-formulated tablets. The results were compared statistically with reference methods and no significant difference was found. The developed methods are rapid, sensitive, inexpensive and accurate for the quality control and routine analysis of the cited drugs in bulk and in pharmaceutical preparations without pre-separation.

A stability-indicating HPLC method for the quantification of aliskiren and hydrochlorothiazide in a pharmaceutical formulation.

A novel, fast, and sensitive stability-indicating HPLC method was developed, fully validated, and applied to the simultaneous determination of aliskiren and hydrochlorothiazide in a combined formulation. Effective chromatographic separation was achieved using a phenyl analytical column with isocratic elution using the mobile phase 0.030 M ammonium acetate-acetonitrile (60 + 40, v/v) at a flow rate of 0.40 mL/min. The UV spectrophotometric detector was set at 280 nm. The method was linear over the concentration ranges of 1.5-4.5 and 0.125-0.375 µg/mL for aliskiren and hydrochlorothiazide, respectively. The intraday and interday RSD values were less than 6.1%, while the relative percentage error, Er, was less than 5% for both analytes. Both drugs were subjected to stress conditions of acidic and alkaline hydrolysis, oxidation, and thermal degradation. The proposed method proved to be stability indicating by resolution of the drugs from their forced degradation products. The method was applied successfully to the QC and content uniformity tests in combined commercial tablets.

The first insight into the metabolite profiling of grapes from three Vitis vinifera L. cultivars of two controlled appellation (DOC) regions.

The characterization of the metabolites accumulated in the grapes of specific cultivars grown in different climates is of particular importance for viticulturists and enologists. In the present study, the metabolite profiling of grapes from the cultivars, Alvarinho, Arinto and Padeiro de Basto, of two Portuguese Controlled Denomination of Origin (DOC) regions (Vinho Verde and Lisboa) was investigated by gas chromatography-coupled time-of-flight mass spectrometry (GC-TOF-MS) and an amino acid analyzer. Primary metabolites, including sugars, organic acids and amino acids, and some secondary metabolites were identified. Tartaric and malic acids and free amino acids accumulated more in grapes from vines of the DOC region of Vinho Verde than DOC Lisboa, but a principal component analysis (PCA) plot showed that besides the DOC region, the grape cultivar also accounted for the variance in the relative abundance of metabolites. Grapes from the cultivar, Alvarinho, were particularly rich in malic acid and tartaric acids in both DOC regions, but sucrose accumulated more in the DOC region of Vinho Verde.

[NMR-based analysis of water soluble extracts of different Astragali Radix].

Water soluble extract (WSE) is an important index for the quality evaluation of Astragali Radix (AR). In this study, the WSE of the wild AR from Shanxi province (SX) and the cultivated AR from Gansu Province (GS) were compared. The WSEs of two types of AR were determined according to the appendix of Chinese pharmacopoeia. Then the WSEs were subjected to NMR analysis, and the obtained data were analyzed using HCA, PCA, OPLS-DA, microarray analysis, and Spearman rank analysis. In addition, the Pearson correlation of differential metabolites were also calculated. The results showed that the WSE content of GS-AR (37.80%) was higher than that of SX-AR (32.13%). The main constituent of WSE was sucrose, and other 18 compounds, including amino acids, organic acids, were also detected. Multivariate analysis revealed that SX-AR contained more choline, succinic acid, citric acid, glutamate, taurine and aspartate, while GS samples contained more sucrose, arginine and fumaric acid. In addition, the Pearson correlations between different metabolites of the two types of AR also showed apparent differences. The results suggested that the WSE of two types of AR differs not only in the content, but also in the chemical compositions. Thus, the cultivation way is important to the quality of AR. This study supplied a new method for the comparison of extract of herbal drugs.

Dimethylfumarate: potency prediction and clinical experience.

BACKGROUND: Dimethylfumarate (DMF) was the cause of a major outbreak of allergic contact dermatitis as a consequence of its use as an antifungal agent in leather products, particularly in furniture, with what became known as 'toxic sofa dermatitis'. OBJECTIVES: To determine whether the frequency and severity of reactions to DMF arose as a function of its intrinsic potency and/or the nature and extent of exposure. METHODS: The intrinsic potency of DMF was measured with the standard local lymph node assay (LLNA), with determination of an EC3 value, which is the threshold in the LLNA and serves as an indicator of relative skin-sensitizing potency in humans. RESULTS: The EC3 value for DMF was 0.35% when tested in dimethylformamide as a vehicle, indicating that DMF is a strong, but not an extreme, skin sensitizer in this mouse model. CONCLUSIONS: DMF appears to have a sensitizing potency in the mouse that is very similar to that of formaldehyde, which is also a strong human skin sensitizer. However, the frequency and intensity of allergic contact dermatitis reactions to DMF suggest that it was the prolonged, repeated and occlusive exposure to this chemical over large skin areas, combined with the strong sensitizing potency, that generated the 'perfect storm' conditions that caused the DMF epidemic.

Simultaneous determination of aliskiren and hydrochlorothiazide in tablets and spiked human urine by ion-pair liquid chromatography.

An alternative method for analysis of aliskiren (ALI) and hydrochlorothiazde (HCT) in combined dosage forms by ion-pair reversed phase high performance liquid chromatography was developed and validated. The pharmaceutical preparations were analyzed using a C18 column (250 mm x 4.6 mm, 3 microm) with a mobile phase consisting of 25% methanol, 50% sodium monobasic phosphate aqueous solution containing 6 mM tetrabutylammonium bromide and 25% water at pH 7.2. Isocratic analysis was performed at a flow rate of 1 mL/min and a column temperature of 30 degrees C under direct UV detection at 210 nm. Paracetamol was used as internal standard. The validation was performed according to the ICH guidelines. The proposed method was linear over the concentration range of 0.250 to 60 and 0.1 to 10 microg/mL for ALI and HCT, respectively. The limits of detection and quantitation (LOD and LOQ) were 0.075 and 0.198 microg/mL, respectively, for ALI and 0.04 and 0.062 microg/mL, respectively, for HCT. The method proved to be specific, sensitive, precise and accurate with mean recovery values of 101.1 +/- 0.32% and 100.9 +/- 0.41% for ALI and HCT, respectively. The method robustness was evaluated by means of an experimental design. The proposed method was applied successfully to spiked human urine samples with mean recoveries of 98.8 +/- 0.36% and 98.1 +/- 0.21% for ALI and HCT, respectively.