Molecular Mechanisms of Natural Rubber Biosynthesis.

Natural rubber (NR), principally comprising cis-1,4-polyisoprene, is an industrially important natural hydrocarbon polymer because of its unique physical properties, which render it suitable for manufacturing items such as tires. Presently, industrial NR production depends solely on latex obtained from the Pará rubber tree, Hevea brasiliensis. In latex, NR is enclosed in rubber particles, which are specialized organelles comprising a hydrophobic NR core surrounded by a lipid monolayer and membrane-bound proteins. The similarity of the basic carbon skeleton structure between NR and dolichols and polyprenols, which are found in most organisms, suggests that the NR biosynthetic pathway is related to the polyisoprenoid biosynthetic pathway and that rubber transferase, which is the key enzyme in NR biosynthesis, belongs to the cis-prenyltransferase family. Here, we review recent progress in the elucidation of molecular mechanisms underlying NR biosynthesis through the identification of the enzymes that are responsible for the formation of the NR backbone structure.

Downregulation of HbFPS1 affects rubber biosynthesis of Hevea brasiliensis suffering from tapping panel dryness.

Tapping panel dryness (TPD) is a century-old problem that has plagued the natural rubber production of Hevea brasiliensis. TPD may result from self-protective mechanisms of H. brasiliensis in response to stresses such as excessive hormone stimulation and mechanical wounding (bark tapping). It has been hypothesized that TPD impairs rubber biosynthesis; however, the underlying mechanisms remain poorly understood. In the present study, we firstly verified that TPD-affected rubber trees exhibited lower rubber biosynthesis activity and greater rubber molecular weight compared to healthy rubber trees. We then demonstrated that HbFPS1, a key gene of rubber biosynthesis, and its expression products were downregulated in the latex of TPD-affected rubber trees, as revealed by transcriptome sequencing and iTRAQ-based proteome analysis. We further discovered that the farnesyl diphosphate synthase HbFPS1 could be recruited to small rubber particles by HbSRPP1 through protein-protein interactions to catalyze farnesyl diphosphate (FPP) synthesis and facilitate rubber biosynthesis initiation. FPP content in the latex of TPD-affected rubber trees was significantly decreased with the downregulation of HbFPS1, ultimately resulting in abnormal development of rubber particles, decreased rubber biosynthesis activity, and increased rubber molecular weight. Upstream regulator assays indicated that a novel regulator, MYB2-like, may be an important regulator of downregulation of HbFPS1 in the latex of TPD-affected rubber trees. Our findings not only provide new directions for studying the molecular events involved in rubber biosynthesis and TPD syndrome and contribute to rubber management strategies, but also broaden our knowledge of plant isoprenoid metabolism and its regulatory networks.

Late-instar monarch caterpillars sabotage milkweed to acquire toxins, not to disarm plant defence.

Sabotaging milkweed by monarch caterpillars (Danaus plexippus) is a famous textbook example of disarming plant defence. By severing leaf veins, monarchs are thought to prevent the flow of toxic latex to their feeding site. Here, we show that sabotaging by monarch caterpillars is not only an avoidance strategy. While young caterpillars appear to avoid latex, late-instar caterpillars actively ingest exuding latex, presumably to increase sequestration of cardenolides used for defence against predators. Comparisons with caterpillars of the related but non-sequestering common crow butterfly (Euploea core) revealed three lines of evidence supporting our hypothesis. First, monarch caterpillars sabotage inconsistently and therefore the behaviour is not obligatory to feed on milkweed, whereas sabotaging precedes each feeding event in Euploea caterpillars. Second, monarch caterpillars shift their behaviour from latex avoidance in younger to eager drinking in later stages, whereas Euploea caterpillars consistently avoid latex and spit it out during sabotaging. Third, monarchs reared on detached leaves without latex sequestered more cardenolides when caterpillars imbibed latex offered with a pipette. Thus, we conclude that monarch caterpillars have transformed the ancestral 'sabotage to avoid' strategy into a 'sabotage to consume' strategy, implying a novel behavioural adaptation to increase sequestration of cardenolides for defence.

Heat waves induce milkweed resistance to a specialist herbivore via increased toxicity and reduced nutrient content.

Over the last decade, a large effort has been made to understand how extreme climate events disrupt species interactions. Yet, it is unclear how these events affect plants and herbivores directly, via metabolic changes, and indirectly, via their subsequent altered interaction. We exposed common milkweed (Asclepias syriaca) and monarch caterpillars (Danaus plexippus) to control (26:14°C, day:night) or heat wave (HW) conditions (36:24°C, day:night) for 4 days and then moved each organism to a new control or HW partner to disentangle the direct and indirect effects of heat exposure on each organism. We found that the HW directly benefited plants in terms of growth and defence expression (increased latex exudation and total cardenolides) and insect her'bivores through faster larval development. Conversely, indirect HW effects caused both plant latex and total cardenolides to decrease after subsequent herbivory. Nonetheless, increasing trends of more toxic cardenolides and lower leaf nutritional quality after herbivory by HW caterpillars likely led to reduced plant damage compared to controls. Our findings reveal that indirect impacts of HWs may play a greater role in shaping plant-herbivore interactions via changes in key physiological traits, providing valuable understanding of how ecological interactions may proceed in a changing world.

Occupational anaphylaxis-Data from the anaphylaxis registry.

BACKGROUND: Epidemiologic data on occupational anaphylaxis is scarce, and there is a need of more knowledge about work-related anaphylactic episodes. METHODS: Based on the data of the Anaphylaxis Registry, we identified cases related to occupational exposure and analyzed the elicitors, demographics, severity of clinical reaction and management. RESULTS: Since 2017, 5851 cases with an information about the occupational relation of the anaphylactic episode were registered whereby 225 (3.8%) were assigned to be caused by an occupational allergen. The vast majority of these occupational anaphylaxis cases were caused by insects (n = 186, 82.7%) followed by food (n = 27, 12.0%) and drugs (n = 8, 3.6%). Latex elicited occupational anaphylaxis in only two cases. Beekeepers, gardeners, farmers, and individuals working in professions associated with food handling, for example, employees in restaurants, bakery, pastry, and cooks were most frequently affected. The comparison of the occupational insect venom-induced anaphylaxis to a group of non-occupational insect anaphylaxis in adults (n = 1842) revealed a significant younger age in occupational anaphylaxis (46 vs. 53 years), a predominance of bee-induced cases (38% vs. 17%), and a higher rate of venom immunotherapy in a primary care setting (3.3% vs. 1.3%, p = .044). In the occupational- versus non-occupational adults with food-induced anaphylaxis atopic dermatitis as concomitant atopic disease was observed more frequently (n = 486; 20% vs. 10%), although this was not significant. CONCLUSION: Our data demonstrate the impact of venom allergy in work-related anaphylaxis. Foods and drugs are less frequently elicitors, and latex-induced occupational anaphylaxis was rare. More data are needed to determine risk factors associated with occupational anaphylaxis.

Genome-wide identification and data mining reveals major-latex protein (MLP) from the PR-10 protein family played defense-related roles against phytopathogenic challenges in cassava (Manihot esculenta Crantz).

Despite being identified in previous articles, the pathogenesis-related 10 (PR-10) protein remains relatively overlooked and has yet to be fully characterized in numerous plant species. This research employs a comprehensive data mining approach to in silico characterize PR-10 proteins in cassava, a vital crop plant globally. In this study, the focus was on in silico identified 53 cassava PR-10 proteins, which can be categorized into two main subgroups: 34 major latex proteins (MLPs) and 13 major allergen proteins, Pru ar 1, based on their phylogenetic relationship. The genome collinearity analysis with the rubber tree showed a possible evolutionary relationship of the PR-10 gene between these two Euphorbiaceae species, specifically on their chromosome 15. Notably, MLP423 and other MLP proteins were identified in various previously published cassava transcriptome datasets in response to biotic treatments from diverse phytopathogens, including anthracnose fungus, viruses, and bacterial blight. Ligand prediction and molecular docking of three MLP423 proteins have revealed potential interaction with cytokinin and abscisic acid hormones. Their expressions and predicted binding affinities are discussed here, highlighting their role as contributors to cassava's defense network against key diseases.

Safety of EUS latex balloon use in patients with a latex allergy.

BACKGROUND AND AIMS: Balloons are used in EUS to improve visualization. However, data on the safety of latex balloons in patients with latex allergies are limited, and nonlatex alternatives can be costly. We investigated the safety of latex balloon use during EUS. METHODS: A retrospective review was conducted at a tertiary center between 2019 and 2022. Patients with reported latex allergies who underwent linear EUS were included. Baseline demographics, EUS characteristics, and adverse events were collected. The primary outcome was the rate of adverse events. RESULTS: Eighty-seven procedures were performed on 57 unique patients (mean age, 65.3 ± 14.5 years). Latex balloons were used in 59 procedures (67.8%), with only 8 procedures (13.6%) using prophylactic medications. No adverse events occurred during or after procedures, regardless of medication use or history of anaphylaxis. CONCLUSIONS: The use of EUS latex balloons in patients with a latex allergy was associated with no adverse events.

Film Formation of Iodinated Latex Dispersions and Its Role in Their Antimicrobial Activity.

Waterborne coatings with intrinsic antibacterial attributes have attracted significant attention due to their potential in mitigating microbial contamination while simultaneously addressing the environmental drawbacks of their solvent-based counterparts. Typically, antimicrobial coatings are designed to resist and eliminate microbial threats, encompassing challenges such as biofilm formation, fungal contamination, and proliferation of black mold. Iodine, when solubilized using ethylene glycol and incorporated as a complex into waterborne latex dispersions, has shown remarkable antimicrobial activity. Here, we demonstrate the effect of the film formation process of these iodinated latex dispersions on their antimicrobial properties. The effect of iodine on the surface morphology and mechanical, adhesion, and antimicrobial properties of the generated films was investigated. Complete integration and uniform distribution of iodine in the films were confirmed through UV-vis spectrophotometry and a laser Raman imaging system (LRIS). In terms of properties, iodinated films showed improved mechanical strength and adhesion compared with blank films. Further, the presence of iodine rendered the films rougher, making them susceptible to bacterial adhesion, but interestingly provided enhanced antibiofilm activity. Moreover, thicker films had a lower surface roughness and reduced biofilm growth. These observations are elucidated through the complex interplay among film thickness, surface morphology, and iodine properties. The insights into the interlink between the film formation process and antimicrobial properties of iodinated latex dispersions will facilitate their enhanced application as sustainable alternatives to solvent-based coatings.

Bioderived Thiol-Ene Emulsion Polymerization for Hybrid Latex Particles.

The thiol-ene emulsion polymerization of three dienes synthesized from bioderived compounds, and subsequent preparation of core-shell polymer latexes, is reported. Levoglucosan (LGA), levogucosenone (LGO) and isosorbide were first modified with 4-pentenoic acid to install polymerizable groups. These monomers were used along with a dithiol to prepare poly(thioether) particles via ab initio emulsion polymerization using potassium persulfate as initiator and sodium dodecyl sulfate as surfactant. The structure of the diene significantly influenced the size of the resulting polymer latex particles. Given their low glass transition temperature, the LGA-derived poly(thioether) particles were used as a seed for the seeded emulsion polymerization of either styrene or methyl methacrylate. Core-shell latex particles with a high Tg core and a low Tg bioderived shell were formed, as verified by electron microscopy and in agreement with theoretical predictions of the equilibrium particle morphology based on the interfacial tensions of each particle phase.

The Effect of Cellulose Nanocrystal Reassembly on Latex-Based Pressure-Sensitive Adhesive Performance.

Different cellulose nanocrystal (CNC) forms (dried vs never-dried) can lead to different degrees of CNC reassembly, the formation of nanofibril-like structures, in nanocomposite latex-based pressure-sensitive adhesive (PSA) formulations. CNC reassembly is also affected by CNC sonication and loading as well as the protocol used for CNC addition to the polymerization. In this study, carboxylated CNCs (cCNCs) were incorporated into a seeded, semibatch, 2-ethylhexyl acrylate/methyl methacrylate/styrene emulsion polymerization and cast as pressure-sensitive adhesive (PSA) films. The addition of CNCs led to a simultaneous increase in tack strength, peel strength, and shear adhesion, avoiding the typical trade-off between the adhesive and cohesive strength. Increased CNC reassembly resulted from the use of dried, redispersed, and sonicated cCNCs, along with increased cCNC loading and addition of the cCNCs at the seed stage of the polymerization. The increased degree of CNC reassembly was shown to significantly increase the shear adhesion by enhancing the elastic modulus of the PSA films.

Bridging Flocculation of a Sterically Stabilized Cationic Latex as a Biosensor for the Detection of Microbial DNA after Amplification via PCR.

There is a high demand for rapid, sensitive, and accurate detection methods for pathogens. This paper demonstrates a method of detecting the presence of amplified DNA from a range of pathogens associated with serious infections including Gram-negative bacteria, Gram-positive bacteria, and viruses. DNA is amplified using a polymerase chain reaction (PCR) and consequently detected using a sterically stabilized, cationic polymer latex. The DNA induces flocculation of this cationic latex, which consequently leads to rapid sedimentation and a visible change from a milky-white dispersion to one with a transparent supernatant, presenting a clear visible change, indicating the presence of amplified DNA. Specifically, a number of different pathogens were amplified using conventional or qPCR, including Staphylococcus aureus, Escherichia coli, and Herpes Simplex Virus (HSV-2). This method was demonstrated to detect the presence of bacteria in suspension concentrations greater than 380 CFU mL-1 and diagnose the presence of specific genomes through primer selection, as exemplified using methicillin resistant and methicillin susceptible Staphylococcus aureus. The versatility of this methodology was further demonstrated by showing that false positive results do not occur when a PCR of fungal DNA from C. albicans is conducted using bacterial universal primers.

Biodegradable Alkali-Swellable Emulsion Polymers: Industrial and Commercial Thickeners.

Sustainability and circularity are key issues facing the global polymer industry. The search for biodegradable and environmentally-friendly polymers that can replace conventional materials is a difficult challenge that has been met with limited success. Alternatives must be cost-effective, scalable, and provide equivalent performance. We report that latexes made by the conventional emulsion polymerization of vinyl acetate and functional vinyl ester monomers are efficient thickeners for consumer products and biodegrade in wastewater. This approach uses readily-available starting materials and polymerization is carried out in water at room temperature, in one pot, and generates negligible waste. Moreover, the knowledge that poly(vinyl ester)s are biodegradable will lead to the design of new green polymer materials.

Skin simulants for wound ballistic investigation - an experimental study.

Gunshot wound analysis is an important part of medicolegal practice, in both autopsies and examinations of living persons. Well-established and studied simulants exist that exhibit both physical and biomechanical properties of soft-tissues and bones. Current research literature on ballistic wounds focuses on the biomechanical properties of skin simulants. In our extensive experimental study, we tested numerous synthetic and natural materials, regarding their macromorphological bullet impact characteristics, and compared these data with those from real bullet injuries gathered from medicolegal practice. Over thirty varieties of potential skin simulants were shot perpendicularly, and at 45°, at a distance of 10 m and 0.3 m, using full metal jacket (FMJ) projectiles (9 × 19 mm Luger). Simulants included ballistic gelatine at various concentrations, dental silicones with several degrees of hardness, alginates, latex, chamois leather, suture trainers for medical training purposes and various material compound models. In addition to complying to the general requirements for a synthetic simulant, results obtained from dental silicones shore hardness 70 (backed with 20 % by mass gelatine), were especially highly comparable to gunshot entry wounds in skin from real cases. Based on these results, particularly focusing on the macroscopically detectable criteria, we can strongly recommend dental silicone shore hardness 70 as a skin simulant for wound ballistics examinations.

Comparison of direct analysis in real-time mass spectrometry, atmospheric solids analysis probe-mass spectrometry, and ion mobility spectrometry for ensuring food safety by rapid screening of poppy seeds.

The opium poppy (Papaver somniferum) is a global commercial crop that has been historically valued for both medicinal and culinary purposes. Naturally occurring opium alkaloids including morphine, codeine, thebaine, noscapine, and papaverine are found primarily in the latex produced by the plant. If the plant is allowed to fully mature, poppy seeds that do not contain the opium alkaloids will form within the pods and may be used in the food industry. It is possible for the seeds to become contaminated with alkaloids by the latex during harvesting, posing a potential health risk for consumers. In the USA, there have been more than 600 reported adverse events including 19 fatalities that may be linked to the consumption of a contaminated poppy-containing product such as home-brewed poppy seed tea. Unwashed poppy seeds and pods may be purchased over the Internet and shipped worldwide. The Forensic Chemistry Center, US Food and Drug Administration (FDA) has evaluated several mass spectrometers (MS) capable of rapid screening to be used for high-throughput analysis of samples such as poppy seeds. These include a direct analysis in real-time (DART) ambient ionization source coupled to a single-quadrupole MS, an atmospheric solids analysis probe (ASAP) ionization source coupled to the same MS, and ion mobility spectrometers (IMS). These instruments have been used to analyze 17 poppy seed samples for the presence of alkaloids, and the results were compared to data obtained using liquid chromatography with mass spectral detection (LC-MS/MS). Results from the 17 poppy seed samples indicate that the DART-MS, ASAP-MS, and IMS devices detect many of the same alkaloids confirmed during the LC-MS/MS analyses, although both the false-positive and false-negative rates are higher, possibly due to the non-homogeneity of the samples and the lack of chromatographic separation.

Synergistic Effects of the Superhydrophilic and Superhydrophobic Components on the Antifreezing Performances of Latex Particles and Anti-Icing Properties of Latex Films.

The development of new materials for antifreezing and anti-icing applications is a big challenge in industry and academic area. Inspired by the antifreeze proteins, latex particles with superhydrophilic zwitterionic shells and superhydrophobic cores are synthesized by reversible addition-fragmentation chain transfer emulsion polymerization, and the applications of the latex particles in antifreezing and anti-icing applications are investigated. In antifreezing study, the critical aggregate temperature (CAT) of the latex particles decreases, and the separation of the melting and freezing temperature of ice increases with the particle concentration. Enzyme molecules can be cryopreserved in the particle solution, and their bioactivities are well maintained. Latex particles are casted into latex films with dynamic surfaces. Anti-icing performances, including antifrosting properties, freezing delay time, and ice adhesion strengths, are studied; and the water-treated latex films present stronger anti-icing properties than other films, due to the synergistic effects of the superhydrophilic and superhydrophobic components. In addition, latex particles with zwitterionic shells and poly(n-butyl methacrylate) cores, and latex particles with small molecular surfactant on the surfaces are synthesized. The antifreezing performances of the latex particles and anti-icing properties of the latex films are compared.

Cleavage of natural rubber by rubber oxygenases in Gram-negative bacteria.

Bacterial degradation of natural rubber (NR) in an oxic environment is initiated by oxidative cleavage of double bonds in the NR-carbon backbone and is catalyzed by extracellular haem-containing rubber oxygenases. NR-cleavage products of sufficiently low molecular mass are taken up by the cells and metabolized for energy and biomass formation. Gram-negative and Gram-positive NR-degrading bacteria (usually) employ different types of rubber oxygenases such as RoxA and/or RoxB (most Gram-negative NR-degraders) or latex clearing protein Lcp (most Gram-positive NR-degraders). In order to find novel orthologues of Rox proteins, we have revisited databases and provide an update of Rox-like proteins. We describe the putative evolution of rubber oxygenases and confirm the presence of a third subgroup of Rox-related proteins (RoxCs), the biological function of which remains, however, unclear. We summarize the knowledge on the taxonomic position of Steroidobacter cummioxidans 35Y and related species. Comparison of genomic and biochemical features of strain 35Y with other species of the genus Steroidobacter suggests that strain 35Y represents a species of a novel genus for which the designation Aurantibaculum gen. nov. is proposed. A short summary on the capabilities of NR-degrading consortia, that could be superior in biotechnological applications compared to pure cultures, is also provided. KEY POINTS: • Three types of rubber oxygenases exist predominantly in Gram-negative microbes • S. cummioxidans 35Y contains RoxA and RoxB which are superior in activity • S. cummioxidans 35Y represents a species of a novel genus.

Clinical breakage, slippage and acceptability of two commercial ultra-thin polyurethane male condoms compared to a commercial thin latex condom: a randomised, masked, 3 way crossover, multi centre controlled study (SAGCS 2).

BACKGROUND: Although natural rubber latex remains dominant as the primary manufacturing material for male condoms synthetic materials first introduced in the early 1990s address many of the limitations of latex including the risk of allergies. Polyurethane elastomers allow condoms to be made significantly thinner to provide greater sensitivity and encourage greater use of condoms for contraception and STI prophylaxis. The primary objective of this Study was to evaluate the breakage, slippage and acceptability of two ultra-thin polyurethane condoms against a thin control latex male condom, designated latex C, in a randomized, cross over, masked, non-inferiority study. The condom designated Polyurethane A was designed for markets where 52/53 mm wide latex condoms are preferred whereas the condom designated Polyurethane B was designed for markets where the smaller 49 mm wide latex condom is preferred. METHODS: The Study was designed to meet the requirements specified in ISO 29943-1: 2017 and FDA guidelines for clinical studies on synthetic condoms. It was conducted by two Essential Access Health centres, one in Northern California and the other in Southern California. Sexually active heterosexual couples (300) aged between 18 and 45 years were recruited to use three sets of five condoms in a block randomized order, recording breakage, slippage and acceptability after each use. A total of 252 couples contributed 2405 evaluable condom uses per protocol for the Condom A versus Latex C comparison (1193 Polyurethane A plus 1212 Latex C), and 247 couples provided 2335 evaluable condom uses per protocol for the Condom B versus Latex C comparison (1142 Polyurethane B plus 1193 Latex C). Only condoms used for vaginal intercourse were included in the analysis. FINDINGS: Although the total failure rates (breakage and slippage) for the polyurethane condoms were higher than for the control Latex C condom, all condoms performed extremely well with low failure rates compared to similar condom studies. Condom Polyurethane A met the noninferiority requirements specified in ISO 23409:2011 relative to Latex C, the control NR latex condom, in the full Study population. While condom Polyurethane B did not meet the noninferiority requirement for the full Study population, it did meet the noninferiority requirement when analysis was restricted to the intended population (men with penis lengths ≤ 170 mm). Trial registration The Study is registered with ClinicalTrials.gov, NCT04622306, Protocol Reference SAGCS 2, initial release date 11/02/2020.

Surgical Feasibility Study on Cadaver for Vascularized Wrist Joint Transplantation.

PURPOSE: Despite modern advancements in the treatment of late stages of wrist joint degeneration, few reliable options exist for patients requiring motion-preserving reconstruction of their radiocarpal and midcarpal joints. Vascularized composite allotransplantation (VCA) could be considered an option for wrist reconstruction in the future. The goal of this study was to describe the relevant anatomy and design a potential surgical technique for wrist VCA. METHODS: Anatomic studies were performed on 17 human upper extremities. The arterial system of each cadaver was injected with latex dye or radiographic contrast. After injecting a contrast medium visible on a computerized tomography (CT) scan, the initial three specimens were examined using microCT. This confirmed joint vascular patency and allowed for the dissection of the other specimens that were injected with latex for the study of joint vascularization and the design of the wrist VCA. We then outlined a donor and recipient surgical technique for transplant based on recipient CT scans. Customized cutting guides were designed for the transplant procedure. After the procedure, we performed angiography of the VCA to determine the vascularity of the transplant. RESULTS: Using a combined volar and dorsal approach, we were able to perform a complete wrist VCA procedure. After the completed transplant procedure, angiographic imaging of the specimens demonstrated that the flap dissection and transplantation preserved the nutrient endosteal supply to the distal end of the radius and ulna, as well as to the carpal bones and the metacarpal bases. CONCLUSIONS: The dissection of the donor, recipient, and the entire vascularized joint transplant procedure served to illustrate the anatomical feasibility of the cadaveric surgical technique. This establishes an anatomic basis for the possibility of future human clinical applications. CLINICAL RELEVANCE: This study helps investigate the anatomical feasibility of a wrist VCA.

Overexpression of HbGRF4 or HbGRF4-HbGIF1 Chimera Improves the Efficiency of Somatic Embryogenesis in Hevea brasiliensis.

Transgenic technology is a crucial tool for gene functional analysis and targeted genetic modification in the para rubber tree (Hevea brasiliensis). However, low efficiency of plant regeneration via somatic embryogenesis remains a bottleneck of successful genetic transformation in H. brasiliensis. Enhancing expression of GROWTH-REGULATING FACTOR 4 (GRF4)-GRF-INTERACTING FACTOR 1 (GIF1) has been reported to significantly improve shoot and embryo regeneration in multiple crops. Here, we identified endogenous HbGRF4 and HbGIF1 from the rubber clone Reyan7-33-97, the expressions of which dramatically increased along with somatic embryo (SE) production. Intriguingly, overexpression of HbGRF4 or HbGRF4-HbGIF1 markedly enhanced the efficiency of embryogenesis in two H. brasiliensis callus lines with contrasting rates of SE production. Transcriptional profiling revealed that the genes involved in jasmonic acid response were up-regulated, whereas those in ethylene biosynthesis and response as well as the S-adenosylmethionine-dependent methyltransferase activity were down-regulated in HbGRF4- and HbGRF4-HbGIF1-overexpressing H. brasiliensis embryos. These findings open up a new avenue for improving SE production in rubber tree, and help to unravel the underlying mechanisms of HbGRF4-enhanced somatic embryogenesis.

Utilizing the Banana S-Adenosyl-L-Homocysteine Hydrolase Allergen to Identify Cross-Reactive IgE in Ryegrass-, Latex-, and Kiwifruit-Allergic Individuals.

Food allergies mediated by specific IgE (sIgE) have a significant socioeconomic impact on society. Evaluating the IgE cross-reactivity between allergens from different allergen sources can enable the better management of these potentially life-threatening adverse reactions to food proteins and enhance food safety. A novel banana fruit allergen, S-adenosyl-L-homocysteine hydrolase (SAHH), has been recently identified and its recombinant homolog was heterologously overproduced in E. coli. In this study, we performed a search in the NCBI (National Center for Biotechnology Information) for SAHH homologs in ryegrass, latex, and kiwifruit, all of which are commonly associated with pollen-latex-fruit syndrome. In addition, Western immunoblot analysis was utilized to identify the cross-reactive IgE to banana SAHH in the sera of patients with a latex allergy, kiwifruit allergy, and ryegrass allergy. ClustalOmega analysis showed more than 92% amino acid sequence identity among the banana SAHH homologs in ryegrass, latex, and kiwifruit. In addition to five B-cell epitopes, in silico analysis predicted eleven T-cell epitopes in banana SAHH, seventeen in kiwifruit SAHH, twelve in ryegrass SAHH, and eight in latex SAHH, which were related to the seven-allele HLA reference set (HLA-DRB1*03:01, HLA-DRB1*07:01, HLA-DRB1*15:01, HLA-DRB3*01:01, HLA-DRB3*02:02, HLA-DRB4*01:01, HLA-DRB5*01:01). Four T-cell epitopes were identical in banana and kiwifruit SAHH (positions 328, 278, 142, 341), as well as banana and ryegrass SAHH (positions 278, 142, 96, and 341). All four SAHHs shared two T-cell epitopes (positions 278 and 341). In line with the high amino acid sequence identity and B-cell epitope homology among the analyzed proteins, the cross-reactive IgE to banana SAHH was detected in three of three latex-allergic patients, five of six ryegrass-allergic patients, and two of three kiwifruit-allergic patients. Although banana SAHH has only been studied in a small group of allergic individuals, it is a novel cross-reactive food allergen that should be considered when testing for pollen-latex-fruit syndrome.