Utilization of peanut hull hydrochar /beta cyclodextrin/Fe3O4 magnetic composite for lead ion removal from water solution.

This study involves synthesizing peanut hull hydrochar (PHH) and a PHH/ß-CD/Fe3O4 magnetic composite through hydrothermal and chemical precipitation methods, respectively, to use as effective adsorbents for Pb2+ removal. Vibrating-sample magnetometry (VSM) and Brunauer-Emmett-Teller (BET) analyses revealed that the magnetic saturation value and specific active surface area of PHH/ß-CD/Fe3O4 are 31.543 emu/g and 32.123 m2/g, respectively. The impact of key variables on adsorption efficiency was evaluated using the response surface method - central composite design. ANOVA results (F-value: 166.22 and p-value: <0.05) demonstrated that the model effectively assesses the interaction of variables in the adsorption process. Additionally, R2, Adjusted R2, and Predicted R2 values were 0.999, 0.986, and 0.975, respectively, indicating the model's high adequacy in describing response changes. The maximum efficiency for Pb2+ adsorption was found to be 95.35% using PHH and 99.73% with the PHH/ß-CD/Fe3O4 magnetic composite. These measurements were taken at a temperature of 25 °C, an adsorbent dose of 1 g/L, a pH of 6, and a Pb2+ concentration of 5 mg/L, with respective contact times of 130 min and 50 min. Thermodynamic analysis revealed negative enthalpy and Gibbs free energy values, indicating that the adsorption process is exothermic and spontaneous. The negative entropy parameter suggests a reduction in random interactions during the process. The Pb2+ adsorption data for both PHH (R2: 0.982) and PHH/ß-CD/Fe3O4 (R2: 0.985) were best described by the Pseudo 2nd order kinetic model. Equilibrium data followed the Freundlich model, with R2 values of 0.981 for PHH and 0.990 for PHH/ß-CD/Fe3O4, highlighting the importance of heterogeneous surfaces in the removal process. The maximum adsorption capacities for Pb2+ were 26.72 mg/g for PHH and 33.88 mg/g for PHH/ß-CD/Fe3O4. Reuse and stability tests confirmed the structural stability and reusability of the adsorbents. Therefore, the PHH/ß-CD/Fe3O4 magnetic composite is a promising option for removing Pb2+ from aqueous solutions.

Synthesis and fabrication of magnetically separable phosphate-modified magnetic chitosan composites for lead(II) selective removal from wastewater.

To address the urgent need for efficient removal of lead-containing wastewater and reduce the risk of toxicity associated with heavy-metal wastewater contamination, materials with high removal rates and easy separation must be developed. Herein, a novel organic-inorganic hybrid material based on phosphorylated magnetic chitosan (MSCP) was synthesized and applied for the selective removal of lead (II) from wastewater. From the characterization and the experimental results can be obtained that the magnetic saturation strength of MSCP reaches 14.65 emu/g, which can be separated quickly and regenerated readily, and maintains high adsorption performance even after 5 cycles, indicating that the adsorbent possesses good magnetic separation performance and durability. Also, MSCP showed high selective adsorption performance for lead in the multiple metal ions coexistence solutions at pH 6.0 and room temperature, with an adsorption coefficient SPb-MSCP of 78.85%, which was much higher than that of MSC (the SPb-MSC was 11.59%). Additionally, in the single lead system, the sorption characteristics of Pb(II) on MSCP and MCP had obvious pH-responsiveness, and their adsorption capacity increased with the increase of solution pH, reaching the maximal values of 80.19 and 72.68 mg/g, respectively. It is noteworthy that the acid resistance of MSCP with an inert layer coated on the core is significantly improved, with almost no iron leaching from MSCP over the entire acidity range, while MCP has 7.63 mg/g of iron leaching at pH 1.0. Significantly, MSCP exhibited a maximum adsorption capacity of 102.04 mg/g, which matches the Langmuir model at pH 6.0 and 298.15 K, and points to the pseudo-second-order kinetics of the chemisorption process of Pb(II) on MSCP. These findings highlight the great potential of MSCP for Pb(II) removal from aqueous solution, making it a promising solution for Pb(II) contamination in wastewater.

Manganese dioxide decorated kiwi peel powder for efficient removal of lead from aqueous solutions, blood and Traditional Chinese Medicine extracts.

For human health and environment safety, it is of great significance to develop novel materials with high effectiveness for removal of lead from not only aqueous solutions but also human body and traditional Chinese medicines. Here, functional kiwi peel composite, manganese dioxide decorated kiwi peel powder (MKPP), is proposed for the removal of Pb2+ effectively. The adsorption of Pb2+ in aqueous solution is a highly selective and endothermic process and kinetically follows a pseudo-second-order model, which can reach equilibrium with the capacity of 192.7 mg/g within 10 min. Comprehensive factors of hydration energy, charge-to-radius ratio and softness of Pb2+ make a stronger affinity between MKPP and Pb2+. The possible adsorption mechanism involves covalent bond, electrostatic force and chelation, etc. MKPP can be efficiently regenerated and reused with high adsorption efficiency after five cycles. Besides, MKPP can remove over 97% of Pb2+ from real water samples. MKPP can also alleviate lead poisoning to a certain extent and make the Pb level of TCM extract meet the safety standard. This work highlights that MKPP is a promising adsorbent for the removal of Pb2+ and provides an efficient strategy for reusing kiwi peel as well as dealing with the problem of Pb pollution.

Efficient adsorption of lead and copper from water by modification of sand filter with a green plant-based adsorbent: Adsorption kinetics and regeneration.

In this study, pomegranate seed waste (PSW) was added into sand filter (SF) to increase removal efficiency of Lead (Pb(II)) and Copper (Cu(II)) from polluted water. The performance of PSW was compared with activated carbon (AC) as a typical adsorbent. Based on the SEM, EDX, FTIR, XRD, BET and proximate analyses, PSW had porous structure with specific surface area of 2.76 m2/g and active compounds which suggested PSW as an appropriate adsorbent for heavy metals (HMs) adsorption. According to the batch experiments, SF without treatment could only remove 46% and 35% of Pb(II) and Cu(II), respectively. These numbers increased to 88% and 75% for Pb(II) and Cu(II) by adding 3 g/kg PSW to the SF, respectively under the optimal conditions of HMs initial concentrations = 100 mg/L, pH = 7 and contact time = 60 min. The adsorption kinetic and isotherm followed the pseudo-first-order and Langmuir models, respectively indicating that mainly physisorption was involved in the HMs adsorption process of PSW. Based on the column experiments (flow rate = 62.5 mL/min), the Pb(II) and Cu(II) removal increased from 14% to 60% and 10%-55%, respectively after 5 pore volumes (40 min) by adding 3 g/kg PSW to the SF. Breakthrough curves matched better with Thomas mode rather than Adam's Bohart proving Langmuir adsorption isotherm. Our finding suggested modification of SF with PSW is a promising approach for efficient removal of HMs from water.

Recycling of Sewage Sludge: Synthesis and Application of Sludge-Based Activated Carbon in the Efficient Removal of Cadmium (II) and Lead (II) from Wastewater.

The limited supply of drinking water has aroused people's curiosity in recent decades. Adsorption is a popular method for removing hazardous substances from wastewater, especially heavy metals, as it is cheap, highly efficient, and easy to use. In this work, a new sludge-based activated carbon adsorbent (thickened samples SBAC1 and un-thickened samples SBAC2) was developed to remove hazardous metals such as cadmium (Cd+2) and lead (Pb+2) from an aqueous solution. The chemical structure and surface morphology of the produced SBAC1 and SBAC2 were investigated using a range of analytical tools such as CHNS, BET, FT-IR, XRD, XRF, SEM, TEM, N2 adsorption/desorption isothermal, and zeta potential. BET surface areas were examined and SBAC2 was found to have a larger BET surface area (498.386 m2/g) than SBAC1 (336.339 m2/g). While the average pore size was 10-100 nm for SBAC1 and 45-50 nm for SBAC2. SBAC1 and SBAC2 eliminated approximately 99.99% of Cd+2 and Pb+2 out the water under all conditions tested. The results of the adsorption of Cd+2 and Pb+2 were in good agreement with the pseudo-second-order equation (R2 = 1.00). Under the experimental conditions, the Cd+2 and Pb+2 adsorption equilibrium data were effectively linked to the Langmuir and Freundlich equations for SBAC1 and SBAC2, respectively. The regeneration showed a high recyclability for the fabricated SBAC1 and SBAC2 during five consecutive reuse cycles. As a result, the produced SBAC1 and SBAC2 are attractive adsorbents for the elimination of heavy metals from various environmental and industrial wastewater samples.

Estimation of sorption-desorption characteristics of biosorbent of Lantana camara leaves for removal of Pb (II) ions from wastewater.

This study points out the method regarding the removal of Pb (II) ions from water by treatment with Lantana camara leaves' biosorbent (LCLB). The sorption process was investigated by varying different parameters pH, contact time, adsorbent dose, initial metal ion concentration, and temperature. For a 5.00 g sorbent dose and a 45 min of the contact period, a Pb (II) ion solution with an initial metal ion concentration of 10 mg/L resulted in 90.7% maximum elimination at an optimum pH 6 and temperature 298 ± 1.5 K with LCLB. The adsorption process was spontaneous and exothermic. The maximum monolayer adsorption was 3.5 mg/g for Pb (II) sorption using LCLB. Adsorption of Pb (II) ions using LCLB (R2 > 0.999) followed the pseudo-second-order kinetics. The spectroscopic characterization was done by fourier transform infrared (FT-IR) analysis, while scanning electron microscope (SEM) images were captured for the morphological characterization. Desorption experiments revealed that hydrochloric acid has a strong potential as an eluent for Pb (II) ion desorption. The findings proposed that LCLB can be used as an effectual and cost-effective biosorbent for the expulsion of Pb (II) ions.

Highly-Efficient Sulfonated UiO-66(Zr) Optical Fiber for Rapid Detection of Trace Levels of Pb2.

Lead detection for biological environments, aqueous resources, and medicinal compounds, rely mainly on either utilizing bulky lab equipment such as ICP-OES or ready-made sensors, which are based on colorimetry with some limitations including selectivity and low interference. Remote, rapid and efficient detection of heavy metals in aqueous solutions at ppm and sub-ppm levels have faced significant challenges that requires novel compounds with such ability. Here, a UiO-66(Zr) metal-organic framework (MOF) functionalized with SO3H group (SO3H-UiO-66(Zr)) is deposited on the end-face of an optical fiber to detect lead cations (Pb2+) in water at 25.2, 43.5 and 64.0 ppm levels. The SO3H-UiO-66(Zr) system provides a Fabry-Perot sensor by which the lead ions are detected rapidly (milliseconds) at 25.2 ppm aqueous solution reflecting in the wavelength shifts in interference spectrum. The proposed removal mechanism is based on the adsorption of [Pb(OH2)6]2+ in water on SO3H-UiO-66(Zr) due to a strong affinity between functionalized MOF and lead. This is the first work that advances a multi-purpose optical fiber-coated functional MOF as an on-site remote chemical sensor for rapid detection of lead cations at extremely low concentrations in an aqueous system.

Environment-Induced Reversible Modulation of Optical and Electronic Properties of Lead Halide Perovskites and Possible Applications to Sensor Development: A Review.

Lead halide perovskites are currently widely investigated as active materials in photonic and optoelectronic devices. While the lack of long term stability actually limits their application to commercial devices, several experiments demonstrated that beyond the irreversible variation of the material properties due to degradation, several possibilities exist to reversibly modulate the perovskite characteristics by acting on the environmental conditions. These results clear the way to possible applications of lead halide perovskites to resistive and optical sensors. In this review we will describe the current state of the art of the comprehension of the environmental effects on the optical and electronic properties of lead halide perovskites, and of the exploitation of these results for the development of perovskite-based sensors.

Green and efficient removal of heavy metals from Porphyra haitanensis using natural deep eutectic solvents.

BACKGROUND: Porphyra haitanensis now faces serious heavy metal pollution problems. Natural deep eutectic solvents (NADESs) have been recognized as a novel class of sustainable solvents, which can be used for heavy metal removal. In this study, 28 kinds of NADESs were prepared and investigated as eluent in the removal of lead (Pb), cadmium (Cd), chromium (Cr), arsenic (As), and copper (Cu) from P. haitanensis for the first time, and the adsorption mechanism of NADESs was also studied. RESULTS: The removals were greatly improved by NADESs compared with control where the removal rates of Pb, Cd, Cr, As and Cu were 17.4-87.54%, 57.54-100%, 9.8-48.59%, 21.32-78.24% and 11.68-79.73%, respectively. The optimal condition was 10% water content and solid-liquid ratio of 1:20. Moreover, the addition of 20% natural surfactant arabic gum can further increase the heavy metals removal rates of NADESs. The adsorption mechanism experiments showed that the pseudo second-order model and the Freundlich adsorption model can better explain the adsorption mechanism of NADESs on heavy metals removal. CONCLUSION: Taken together, a green and efficient method for removing heavy metals from P. haitanensis was established. © 2020 Society of Chemical Industry.

Copper and lead ion removal from wastewater using fava d'anta fodder (Dimorphandra gardneriana Tulasne).

The contamination of bodies of water by potentially hazardous elements has in recent decades become an environmental problem that poses serious risks to humans, fauna, flora and microbiota, compromising the quality of life of the present ecosystem. Therefore, effluents must be properly treated in a legally acceptable manner before their disposal in the environment. With this in mind, adsorption presents itself as an inexpensive efficient technique for the removal of potentially hazardous elements from effluents with excellent adsorption capacities when natural adsorbents are used. In this study, fava d'anta fodder was used in its crude and alkalinized form to remove Cu(II) and Pb(II) ions. Equilibrium studies were carried out using adsorption isotherms in batch systems with mono- and multi-elementary systems containing the two ions. The Langmuir and Freundlich models were applied to the isotherm studies, with the ions being better suited to the Langmuir model, with maximum adsorption capacities of 24.45 mg g-1 and 68.49 mg g-1 (crude form) and 11.12 mg g-1 and 35.34 mg g-1 (alkalinized form) in the mono-elementary system for Cu(II) and Pb(II) ions, respectively.

Oyster shell powder for Pb(II) immobilization in both aquatic and sediment environments.

Heavy metal pollution has always been a serious environmental problem widely concerned by researchers all around the world. On the other side, the accumulation of biowastes has also occupied a large amount of space and caused a series of environment pollution. In this study, the waste oyster shell, was applied as a type of biogenic carbonate material for Pb(II) removal from the aquatic environment, and further as a remediation agent for metal stabilization in the contaminated river sediment. After simple pretreatment, the oyster shell powder (OSP) was characterized, and the results showed that the prepared OSP is mainly composed of calcite with particle size of micron-level. The OSP exhibited excellent Pb(II) adsorption performance, with the adsorption capacity as 639.9 mg/g through adsorption isotherm study. Furthermore, the OSP was applied to remediate the collected river sediment artificially contaminated by Pb(II). It was found that the proportion of residual Pb fraction (F4) was greatly increased from 39.6% of the original sediment to 76.7% in the 14-day incubated sediment with OSP. The Pb(II) concentration after leaching procedure was decreased from 810.7 to 108.6 µg/L even after 5-day incubation. Therefore, this study shows the potential of using waste oyster shell as adsorbent and amendment agent for effective metal immobilization in both aquatic and sediment systems.

Evaluation of Optimized Procedures for High-Precision Lead Isotope Analyses of Seawater by Multiple Collector Inductively Coupled Plasma Mass Spectrometry.

The application of Pb isotopes to marine geochemistry is currently hindered by challenges associated with the analysis of Pb isotopes in seawater. The current study evaluates the performance of multiple collector inductively coupled plasma mass spectrometry (MC-ICP-MS) measurements of seawater Pb isotope compositions following Pb separation by either solid-phase extraction with Nobias Chelate PA-1 resin or coprecipitation with Mg(OH)2 and using either a Pb double spike or external normalization to Tl for mass bias correction. The four analytical combinations achieve results of similar quality when measuring 1-7 ng of seawater Pb, with reproducibilities (two standard deviations, 2SD) of 100-1200 ppm for 206Pb/207Pb and 208Pb/207Pb and 300-1700 ppm for ratios involving the minor 204Pb isotope. All four procedures enable significantly improved sample throughput compared to an established thermal ionization mass spectrometry (TIMS) double-spike method and produce unbiased seawater Pb isotope compositions with similar or improved precision. Nobias extraction is preferable to coprecipitation due to its greater analytical throughput and suitability for analyses of large seawater samples with high Si(OH)4 contents. The most accurate Pb isotope data are produced following Nobias extraction and double-spike correction as such analyses are least susceptible to matrix effects. However, Nobias extraction with Tl normalization constitutes an attractive alternative as, unlike the double-spike procedure, only a single mass spectrometric measurement is required, which improves analytical throughput and optimizes Pb consumption for analysis. Despite the advantages of solid-phase extraction, coprecipitation represents a useful Pb separation technique for samples with low to moderate Si contents as it is inexpensive, simple to implement, and the data are only marginally less accurate, especially when combined with a Pb double spike for mass bias correction.

Effects of excessive impregnation, magnesium content, and pyrolysis temperature on MgO-coated watermelon rind biochar and its lead removal capacity.

MgO-coated watermelon rind biochar (MWRB) is a potentially highly-effective waste-derived material in environmental applications. This research aims to provide valuable insights into the optimization of the production of MWRB for superior environmental performance. It was found that the Mg content of the MWRB could be easily controlled by adjusting the Mg/feedstock mass ratio during excessive impregnation. The BET surface area was found to first increase and then decrease as the Mg content of the MWRB (produced at 600 °C) increased from 1.52% to 10.1%, with an optimal surface area of 293 m2/g observed at 2.51%. Similarly, an optimum pyrolysis temperature of 600 °C was observed in the range of 400-800 °C for a maximum surface area of the MWRB at a fixed Mg/feedstock ratio of 0.48% (resulting in MWRBs with Mg contents of 1.89-2.51%). The Pb removal capacity of the MWRB (produced at 600 °C) increased with increasing Mg content, with a greatest Pb removal capacity of 558 mg/g found for the MWRB with the highest Mg content (10.1%), an improvement of 208% over the 181 mg/g Pb removal capacity of unmodified WRB produced at 600 °C. The Pb removal capacity of the MWRB (produced with 1.89-2.51% Mg) was also discovered to increase from 81.7 mg/g (at 400 °C) to 742 mg/g (at 700 °C), before dropping to 368 mg/g at 800 °C. These findings suggest that the MWRB can be more efficiently utilized in soil and water remediation by optimizing its synthesis conditions.

Monitoring the lead-and-copper rule with a water-gated field effect transistor.

We use the natural zeolite clinoptilolite as the sensitive element in a plasticised PVC membrane. Separating a sample pool and a reference pool with such a membrane in water-gated SnO2 thin-film transistor (SnO2 WGTFT) leads to membrane potential, and thus transistor threshold shift in response to the common drinking water pollutants Pb2+ or Cu2+ in the sample pool. Threshold shift with ion concentration, c, follows a Langmuir-Freundlich (LF) characteristic. As the LF characteristic shows the steepest slope in the limit c → 0, this opens a window to limits-of-detection (LoDs) far below the 'action levels' of the 'lead-and-copper rule' for drinking water: Pb2+: LoD 0.9 nM vs 72 nM action level, Cu2+: LoD 14 nM vs 20.5 µM action level. LoDs are far lower than for membranes using organic macrocycles as their sensitive elements. Threshold shifts at the lead and copper action levels are more significant than shifts in response to variations in the concentration of non-toxic co-cations, and we discuss in detail how to moderate interference. The selective response to lead and copper qualifies clinoptilolite-sensitised WGTFTs as a low footprint sensor technology for monitoring the lead-and-copper rule, and to confirm the effectiveness of attempts to extract lead and copper from water.

Removal of lead, zinc and cadmium from contaminated soils with two plant extracts: Mechanism and potential risks.

Screening appropriate washing agents to remediate soils contaminated with heavy metals is crucial for decreasing metal hazards posing to environment and human health. In this study, two plant washing agents-water-extracted from Fagopyrum esculentum and Fordiophyton faberi, were applied to remove soil Pb, Zn, and Cd by washing. Results indicated that metal removals augmented with increase of washing solution concentrations, decreased with increasing pH values of the solution and followed the pseudo-second-order model depending on contact duration. At concentration of 50 g/L, pH 3 and contact duration of 120 min, F. esculentum had higher removals of Pb (5.98-6.83%), Zn (21.82-27.94%), and Cd (39.90-40.74%) than those of F. faberi. And metal ions could be removed by binding with carboxyl, hydroxyl, amide, amine and aromatic groups in washing solutions. The potential risks of residual metals declined by 51.35-52.12% for mine soil and 48.51-49.96% for farmland soil with exchangeable and carbonate-bound fractions obviously extracted after a single washing (P < 0.05). And soil organic carbon and nutrients increased to some extent except for total phosphorus and available potassium. Moreover, soil phytotoxicity lowered except that some adverse effects on seed germination existed. Therefore, the water extract from F. esculentum is a promising washing agent for heavy metal removal.

Development and characterization of magnetic eggshell membranes for lead removal from wastewater.

An increasing concern for natural resources preservation and environmental safety is the removal of heavy metals from contaminated water. It is essential to develop simple procedures that use ecofriendly materials with high removal capacities. In this context, we have synthesized a new hybrid material in which eggshell membranes (ESMs) act as nucleation sites for magnetite nanoparticles (MNPs) precipitation in the presence of an external magnetic field. As a result, ESM was transformed into a magnetic biomaterial (MESM) in order to combine the Pb adsorption abilities of both MNPs and ESM and to facilitate collection of the bioadsorbant using an external magnetic field. This green co-precipitation method produced long strands of bead-like 50 nm superparamagnetic MNPs decorating the ESM fibers. When MESM were incubated in Pb(NO3)2 solutions, the hybrid material displayed a 2.5-fold increase in binding constant with respect to that of ESM alone, and a 10-fold increased capacity to remove Pb ions from aqueous solution. The manufactured MESMs present a maximum loading capacity of 0.066 ± 0.009 mg Pb/mg MNPs at 25 °C, which is increased up to 0.15 ± 0.05 mg Pb/mg MNPs at 45 °C. Moreover, the MESM system is very stable, since incubation in 1% HCl solution resulted in rapid Pb desorption, while MNP release from the MESM during the same period was negligible. Altogether, these results suggest that MESM could be utilized as an efficient nanoremediation agent for separation/removal of heavy metal ions or other charged pollutants from contaminated waters, with facile recovery for recycling.

Monitoring the Heavy Metal Lead Inside Living Drosophila with a FRET-Based Biosensor.

The harmful impact of the heavy metal lead on human health has been known for years. However, materials that contain lead remain in the environment. Measuring the blood lead level (BLL) is the only way to officially evaluate the degree of exposure to lead. The so-called "safe value" of the BLL seems to unreliably represent the secure threshold for children. In general, lead's underlying toxicological mechanism remains unclear and needs to be elucidated. Therefore, we developed a novel genetically encoded fluorescence resonance energy transfer (FRET)-based lead biosensor, Met-lead, and applied it to transgenic Drosophila to perform further investigations. We combined Met-lead with the UAS-GAL4 system to the sensor protein specifically expressed within certain regions of fly brains. Using a suitable imaging platform, including a fast epifluorescent or confocal laser-scanning/two-photon microscope with high resolution, we recorded the changes in lead content inside fly brains ex vivo and in vivo and at different life stages. The blood-brain barrier was found to play an important role in the protection of neurons in the brain against damage due to the heavy metal lead, either through food or microinjection into the abdomen. Met-lead has the potential to be a powerful tool for the sensing of lead within living organisms by employing either a fast epi-FRET microscope or high-resolution brain imaging.

Deep Eutectic Solvent-Based Microextraction of Lead(II) Traces from Water and Aqueous Extracts before FAAS Measurements.

Microextraction procedures for the separation of Pb(II) from water and food samples extracts were developed. A deep eutectic solvent composed of α-benzoin oxime and iron(III) chloride dissolved in phenol was applied as a phase separator support. In addition, this deep eutectic mixture worked as an efficient extractor of Pb(II). The developed microextraction process showed a high ability to tolerate the common coexisting ions in the real samples. The optimum conditions for quantitative recoveries of Pb(II) from aqueous extracts were at pH 2.0, conducted by adding 150 µL from the deep eutectic solvent. The quantitative recoveries were obtained with various initial sample volumes up to 30 mL. Limits of detection and limits of quantification of 0.008 and 0.025 µg L-1 were achieved with a relative standard deviation (RSD%) of 2.9, which indicates the accuracy and sensitivity of the developed procedure. Recoveries from the reference materials, including TMDA 64.2, TMDA 53.3, and NCSDC-73349, were 100%, 97%, and 102%, respectively. Real samples, such as tap, lake, and river water, as well as food samples, including salted peanuts, chickpeas, roasted yellow corn, pistachios, and almonds, were successfully applied for Pb(II) analysis by atomic absorption spectroscopy (AAS) after applying the developed deep eutectic solvent-based microextraction procedures.

A Field Procedure To Screen Soil for Hazardous Lead.

Soils retain lead contamination from possible sources such as mining, smelting, battery recycling, waste incineration, leaded gasoline, and crumbling paint. Such contamination is often concentrated in toxic hot spots that need to be identified locally. To address this need, a simple field procedure was designed to screen soil for hazardous Pb for use by the general public. The procedure is a modification of the in vitro soil Pb extraction described by Drexler and Brattin ( Hum. Ecol. Risk Assess. 2007, 13, 383 ) and EPA Method 1340, and uses a 0.4 M glycine solution at pH 1.5. A higher soil-to-solution ratio of 1:10 allows for classifying soil samples based on extractable Pb concentrations of <200 mg/kg (low), 200-400 mg/kg (medium), and >400 mg/kg (high) using sodium rhodizonate as a color indicator. The 1:10 soil-to-solution ratio also makes it possible to measure Pb concentrations in the glycine extract solutions on a continuous scale using a portable X-ray fluorescence analyzer. The procedure rather consistently extracts about one-third of the Pb extracted by the standard method across a wide range of Pb concentrations. Manufacturing the kit in larger quantities could reduce the cost of the materials well below the current $5/test.

Polydopamine-functionalized magnetic iron oxide for the determination of trace levels of lead in bovine milk.

In this work, a novel sorbent based on polydopamine-functionalized magnetic ferric oxide (Fe3O4) was synthesized and applied for dispersive solid phase extraction of Pb(II) in bovine milk samples. The extracts were analyzed by flame atomic absorption spectrometry (FAAS). The sorbent was characterized with different analytical techniques (XRD, FT-IR, SEM, TEM, VSM and EDX). To reach the maximum extraction efficiency of Pb(II), some effective parameters on both adsorption and desorption steps were optimized with the aid of central composite design and response surface methodology. Under the optimal conditions, the method provided an enhancement factor of 40.5 corresponding to the absolute recovery of 81%. LOD and LOQ were found as 0.13 and 0.43 ng mL-1, respectively. The calibration curve was linear over the concentration range of 3.0-300 ng mL-1 (R2 = 0.9957). The intra and inter-day precisions (RSD%) of the method were calculated as 3.2% and 5.6%, respectively. Finally, the method was successfully applied for the determination of Pb(II) in different bovine milk samples. The Pb(II) content in one of the investigated milk samples was found to exceed the maximum permissible limit (20 µg L-1) set by Codex Alimentarius Commission. The relative recoveries were obtained within the range of 86.5-93.6.