Exosomes induce endolysosomal permeabilization as a gateway by which exosomal tau seeds escape into the cytosol.

The microtubule-associated protein tau has a critical role in Alzheimer's disease and other tauopathies. A proposed pathomechanism in the progression of tauopathies is the trans-synaptic spreading of tau seeds, with a role for exosomes which are secretory nanovesicles generated by late endosomes. Our previous work demonstrated that brain-derived exosomes isolated from tau transgenic rTg4510 mice encapsulate tau seeds with the ability to induce tau aggregation in recipient cells. We had also shown that exosomes can hijack the endosomal pathway to spread through interconnected neurons. Here, we reveal how tau seeds contained within internalized exosomes exploit mechanisms of lysosomal degradation to escape the endosome and induce tau aggregation in the cytosol of HEK293T-derived 'tau biosensor cells'. We found that the majority of the exosome-containing endosomes fused with lysosomes to form endolysosomes. Exosomes induced their permeabilization, irrespective of the presence of tau seeds, or whether the exosomal preparations originated from mouse brains or HEK293T cells. We also found that permeabilization is a conserved mechanism, operating in both non-neuronal tau biosensor cells and primary neurons. However, permeabilization of endolysosomes only occurred in a small fraction of cells, which supports the notion that permeabilization occurs by a thresholded mechanism. Interestingly, tau aggregation was only induced in cells that exhibited permeabilization, presenting this as an escape route of exosomal tau seeds into the cytosol. Overexpression of RAB7, which is required for the formation of endolysosomes, strongly increased tau aggregation. Conversely, inhibition of lysosomal function with alkalinizing agents, or by knocking-down RAB7, decreased tau aggregation. Together, we conclude that the enzymatic activities of lysosomes permeabilize exosomal and endosomal membranes, thereby facilitating access of exosomal tau seeds to cytosolic tau to induce its aggregation. Our data underscore the importance of endosomal membrane integrity in mechanisms of cellular invasion by misfolded proteins that are resistant to lysosomal degradation.

Efficient production of a lentiviral system for displaying Crimean-Congo hemorrhagic fever virus glycoproteins reveals a broad range of cellular susceptibility and neutralization ability.

Crimean-Congo hemorrhagic fever (CCHF) is a tick-borne disease with a mortality rate of up to 50% in humans. To avoid safety concerns associated with the use of live virus in virus neutralization assays and to detect human serum neutralizing antibodies, we prepared lentiviral particles containing the CCHF glycoprotein (lenti-CCHFV-GP). Incorporation of the GP into the lentiviral particle was confirmed by electron microscopy and Western blotting. Lenti-CCHFV-GP was found to be able to infect a wide range of cell lines, including BHK-21, HeLa, HepG2, and AsPC-1 cells. In addition, lenti-CCHFV-GP was successfully used as an alternative to CCHFV for the detection of neutralizing antibodies. Sera collected from CCHF survivors neutralized lenti-CCHFV-GP particles in a dose-dependent manner. Our results suggest that the lenti-CCHFV-GP pseudovirus can be used as a safe tool for neutralization assays in low-containment laboratories.

Nucleic acid-targeted pathogen reduction technique in red blood cells by UV-generated oxygen radicals for optimising recipient safety.

OBJECTIVES: A novel pathogen reduction technique based on vacuum ultraviolet (VUV) irradiation was developed to reduce pathogen numbers in red blood cell (RBC) components. BACKGROUND: Contaminated blood components pose a great risk of infection in blood recipients. The continuous development of blood screening techniques and pathogen inactivating systems has significantly reduced this risk, but many limitations remain. METHODS: Escherichia coli and Bacillus cereus, and bacteriophage (BP) and Lentivirus (LV) were spiked into suspended red blood cells (sRBCs) or plasma. VUV light with maximum emission at 185 nm and an average dosage of 164 µW/cm2 was placed 5 cm above the targeted products to reduce the pathogen numbers. RESULTS: Treatment for 5 minutes was effective; 3 and 10 log reductions of E coli counts were observed in sRBCs and plasma, and 2 and 3 log reductions of B cereus counts were observed in sRBCs and plasma, respectively. The BP titre was reduced by two and five log points in sRBCs and plasma, respectively; the LV titre was reduced by at least three log points in both sRBCs and plasma. VUV-based irradiation of RBCs does not cause significant structural and functional harmful effects. This novel strategy provides moderate photonic energy to generate oxygen radicals from H2 O and O2 and to selectively decrease DNA integrity of the potential pathogens. CONCLUSION: The VUV-based pathogen reduction technique is a simple and fast procedure with high pathogen reduction efficacy, low toxicity and limited adverse effects on cellular blood products.

Optimization of lentiviral vector production for scale-up in fixed-bed bioreactor.

Lentiviral vectors (LVs) are promising tools for gene therapy. However, scaling up the production methods of LVs in order to produce high-quality vectors for clinical purposes has proven to be difficult. In this article, we present a scalable and efficient method to produce LVs with transient transfection of adherent 293T cells in a fixed-bed bioreactor. The disposable iCELLis bioreactors are scalable with a large three-dimensional (3D) growth area range between 0.53 and 500 m2, an integrated perfusion system, and a controllable environment for production. In this study, iCELLis Nano (2.67-4 m2) was used for optimizing production parameters for scale-up. Transfections were first done using traditional calcium phosphate method, but in later runs polyethylenimine was found to be more reliable and easier to use. For scalable LV production, perfusion rate control by measuring cell metabolite concentrations in the bioreactor leads to higher productivity and reduced costs. Optimization of cell seeding density for targeted cell concentration during transfection, use of low compaction fixed-bed and lowering the culture pH have a positive effect on LV productivity. These results show for the first time that iCELLis bioreactor is scalable from bench level to clinical scale LV production.

Generation of apoptosis-resistant HEK293 cells with CRISPR/Cas mediated quadruple gene knockout for improved protein and virus production.

Apoptosis has important functions during pathophysiologic processes. However, from a biopharmaceutical point of view, active apoptosis of host cells is undesirable during viral packaging or protein expression, because it decreases the efficiency of viral or protein production. Here we used the CRISPR/Cas technique to knock out four pro-apoptotic genes, Caspase3, Caspase6, Caspase7 and AIF1, in HEK293 cells, and successfully produced an apoptosis-resistant cell line. Furthermore, this cell line showed higher expression levels of pro-apoptotic proteins and higher packaging efficiency for the virus carrying these proteins than control HEK293 cells. This study not only produced an apoptosis-resistant cell line that is useful in producing apoptosis-inducing proteins or viruses expressing these proteins, but also provides a methodology to build other apoptosis-resistant cell lines.

P2X7 receptors and Fyn kinase mediate ATP-induced oligodendrocyte progenitor cell migration.

Recruitment of oligodendrocyte precursor cells (OPCs) to the lesions is the most important event for remyelination after central nervous system (CNS) injury or in demyelinating diseases. However, the underlying molecular mechanism is not fully understood. In the present study, we found high concentrations of ATP could increase the number of migrating OPCs in vitro, while after pretreatment with oxidized ATP (a P2X7 receptor antagonist), the promotive effect was attenuated. The promotive effect of 2'(3')-O-(4-benzoylbenzoyl) adenosine 5'-triphosphate (BzATP) (a P2X7 receptor agonist) was more potent than ATP. After incubation with BzATP, the activity of Fyn, one member of the Src family of kinases, was enhanced. Moreover, the interaction between P2X7 and Fyn was identified by co-immunoprecipitation. After blocking the activity of Fyn or down-regulating the expression of Fyn, the migration of OPCs induced by BzATP was inhibited. These data indicate that P2X7 receptors/Fyn may mediate ATP-induced OPC migration under pathological conditions.

Understanding lentiviral vector chromatin targeting: working to reduce insertional mutagenic potential for gene therapy.

Replication-deficient retroviruses have been successfully utilized as vectors, offering an efficient, stable method of therapeutic gene delivery. Many examples exist proving this mode of integrative gene transfer is both effective and safe in cultured systems and clinical trials. Along with their success, severe side effects have occurred with early retroviral vectors causing a shift in the approach to vector design before further clinical testing. Several alternative delivery methods are available but lentiviral vectors (LV) are among the most favorable as they are already well understood. LV offer safer integration site selection profiles and a lower degree of genotoxicity, compared with γ-retroviral vectors. Following their introduction, development of the self-inactivating vector configuration was a huge step to this mode of therapy but did not confer full protection against insertional mutagenesis. As a result integration, modeling must be improved to eventually avoid this possibility. The cellular factor LEDGF/p75 seems to play an essential role in the process of LV site selection and its interactions with chromatin are being quickly resolved. LEDGF/p75 is at the center of one example directed integration effort where recombinant products bias the integration event, a step toward fully directed integration into pre-determined benign loci. A more accurate picture of the details of LEDGF/p75 in the natural integration process is emerging, including new binding specificities, chromatin interaction kinetics and additional cellular factors. Together with next-generation sequencing technology and bio-informatics to analyze integration patterns, these advancements will lead to highly focused directed integration, accelerating wide-spread acceptance of LV for gene therapy.

Lentiviral Vector Bioprocessing.

Lentiviral vectors (LVs) are potent tools for the delivery of genes of interest into mammalian cells and are now commonly utilised within the growing field of cell and gene therapy for the treatment of monogenic diseases and adoptive therapies such as chimeric antigen T-cell (CAR-T) therapy. This is a comprehensive review of the individual bioprocess operations employed in LV production. We highlight the role of envelope proteins in vector design as well as their impact on the bioprocessing of lentiviral vectors. An overview of the current state of these operations provides opportunities for bioprocess discovery and improvement with emphasis on the considerations for optimal and scalable processing of LV during development and clinical production. Upstream culture for LV generation is described with comparisons on the different transfection methods and various bioreactors for suspension and adherent producer cell cultivation. The purification of LV is examined, evaluating different sequences of downstream process operations for both small- and large-scale production requirements. For scalable operations, a key focus is the development in chromatographic purification in addition to an in-depth examination of the application of tangential flow filtration. A summary of vector quantification and characterisation assays is also presented. Finally, the assessment of the whole bioprocess for LV production is discussed to benefit from the broader understanding of potential interactions of the different process options. This review is aimed to assist in the achievement of high quality, high concentration lentiviral vectors from robust and scalable processes.

Benchmarking of Scale-X Bioreactor System in Lentiviral and Adenoviral Vector Production.

We have previously produced viral vectors (lentiviral vector, adenoviral vector, and adeno-associated viral vector) in small and in commercial scale in adherent cells using Pall fixed-bed iCELLis® bioreactor. Recently, a company called Univercells has launched a new fixed-bed bioreactor with the same cell growth surface matrix material, but with different fixed-bed structure than is used in iCELLis bioreactor. We sought to compare the new scale-X™ hydro bioreactor (2.4 m2) and iCELLis Nano system (2.67 m2) to see if the difference has any effect on cell growth or lentiviral vector and adenoviral vector productivity. Runs were performed using parameters optimized for viral vector production in iCELLis Nano bioreactor. Cell growth was monitored by counting nuclei, as well as by following glucose consumption and lactate production. In both bioreactor systems, cells grew well, and the cell distribution was found quite homogeneous in scale-X bioreactor. Univercells scale-X bioreactor was proven to be at least equally efficient or even improved in both lentiviral vector and adenoviral vector production. Based on the results, the same protocol and parameters used in viral vector production in iCELLis bioreactor can also be successfully used for the production in scale-X bioreactor system.

Neuregulin-1 type III determines the ensheathment fate of axons.

The signals that determine whether axons are ensheathed or myelinated by Schwann cells have long been elusive. We now report that threshold levels of neuregulin-1 (NRG1) type III on axons determine their ensheathment fate. Ensheathed axons express low levels whereas myelinated fibers express high levels of NRG1 type III. Sensory neurons from NRG1 type III deficient mice are poorly ensheathed and fail to myelinate; lentiviral-mediated expression of NRG1 type III rescues these defects. Expression also converts the normally unmyelinated axons of sympathetic neurons to myelination. Nerve fibers of mice haploinsufficient for NRG1 type III are disproportionately unmyelinated, aberrantly ensheathed, and hypomyelinated, with reduced conduction velocities. Type III is the sole NRG1 isoform retained at the axon surface and activates PI 3-kinase, which is required for Schwann cell myelination. These results indicate that levels of NRG1 type III, independent of axon diameter, provide a key instructive signal that determines the ensheathment fate of axons.

Inducible packaging cells for large-scale production of lentiviral vectors in serum-free suspension culture.

We have developed new packaging cell lines (293SF-PacLV) that can produce lentiviral vectors (LVs) in serum-free suspension cultures. A cell line derived from 293SF cells, expressing the repressor (CymR) of the cumate switch and the reverse transactivator (rtTA2(S)-M2) of the tetracycline (Tet) switch, was established first. We next generated clones stably expressing the Gag/Pol and Rev genes of human immunodeficiency virus-1, and the glycoprotein of vesicular stomatitis virus (VSV-G). Expression of Rev and VSV-G was tightly regulated by the cumate and Tet switches. Our best packaging cells produced up to 2.6 x 10(7) transducing units (TU)/ml after transfection with the transfer vector. Up to 3.4 x 10(7) TU/ml were obtained using stable producers generated by transducing the packaging cells with conditional-SIN-LV. The 293SF-PacLV was stable, as shown by the fact that some producers maintained high-level LV production for 18 weeks without selective pressure. The utility of the 293SF-PacLV for scaling up production in serum-free medium was demonstrated in suspension cultures and in a 3.5-L bioreactor. In shake flasks, the best packaging cells produced between 3.0 and 8.0 x 10(6) TU/ml/day for 3 days, and the best producer cells, between 1.0 and 3.4 x 10(7) TU/ml/day for 5 days. In the bioreactor, 2.8 liters containing 2.0 x 10(6) TU/ml was obtained after 3 days of batch culture following the transfection of packaging cells. In summary, the 293SF-PacLV possesses all the attributes necessary to become a valuable tool for scaling up LV production for preclinical and clinical applications.

Generation of a stable mammalian cell line for simultaneous expression of multiple genes by using 2A peptide-based lentiviral vector.

Generation of mammalian cells stably expressing multiple exogenous genes is currently difficult. Here we provide a strategy to facilitate this process. First, a helper vector p2A containing three coding sequences for viral 2A peptides was constructed. Three reporter genes coding for red fluorescent protein (DsRed), firefly luciferase (Fluc) and enhanced green fluorescent protein (EGFP) were then inserted into p2A to form a fusion open reading frame that was subsequently subcloned into a lentiviral vector. After transduction, EGFP-positive 293T cells were selected by fluorescence activated cell sorting. The expression of exogenous genes in selected cells was stable for more than 15 passages, and EGFP-positive cells were over 95%. The efficient cleavages of 2A-peptide mediated polyprotein were also observed and all three reporter proteins were functional. Thus, a stable DsRed/Fluc/EGFP-coexpressing cell line was readily established within a short time. The strategy could be useful for basic research and protein production.

Transduction and transplantation of spermatogonia into the testis of ram lambs through the extra-testicular rete.

Spermatogonial transplantation will provide a new way to study spermatogenesis in domestic animals, disseminate male genetics and produce transgenic animals, if efficiency can be improved. We evaluated a 'surgical' method for transplanting donor cells into testes of ram lambs, where the head of the epididymis is reflected, and a catheter introduced into the extra-testicular rete testis. We also tested transduction of ram spermatogonia with a lentiviral (LV) vector as a means to identify permanent colonization, and introduce genes into donor cells. Eight ram lambs, 11- to 13-week olds, were the recipients: in five, spermatogonia were injected into one testis, and the contralateral testis was an un-manipulated control: in two, spermatogonia were injected into one testis and the contralateral was sham-injected: in one, both testes were injected. Six lambs received spermatogonia labelled with a cell-tracking dye and these were collected 1 or 2 weeks after transplantation; three lambs received spermatogonia transduced with a LV vector driving the expression of enhanced Green Fluorescence Protein and these were collected after 2 months. Donor cells were detected by immunohistochemistry in tubules of seven of nine recipient testes. Approximately 22% of tubule cross-sections contained donor cells immediately after transplantation, and 0.2% contained virally transduced cells 2 months after transplantation. The onset of spermatogenesis was delayed, and there were lesions in both injected and sham-injected testes. Despite the effects of the surgery, elongated spermatids were present in one recipient testis 2 months after surgery. The results suggest that, after modifying the surgical and transduction techniques, this approach will be a means to produce good colonization by donor spermatogonia in sheep testes.

Production of High-Titer Lentiviral Particles for Stable Genetic Modification of Mammalian Cells.

Lentiviral gene transfer technologies exploit the natural efficiency of viral transduction to integrate exogenous genes into mammalian cells. This provides a simple research tool for inducing transgene expression or endogenous gene knockdown in both dividing and nondividing cells. This chapter describes an improved protocol for polyethylenimine (PEI)-mediated multi-plasmid transfection and polyethylene glycol (PEG) precipitation to generate and concentrate lentiviral vectors.

A Scalable Lentiviral Vector Production and Purification Method Using Mustang Q Chromatography and Tangential Flow Filtration.

Lentiviral vectors have rapidly become a favorite tool for research and clinical gene transfer applications which seek to permanently introduce alterations in the genome. This status can be attributed primarily to their ability to transduce dividing as well as quiescent cells. When coupled with internal promotor selection to drive expression in one cell type but not another, the ease with which the vectors can be pseudotyped to either restrict or expand tropism offers unique opportunities previously unavailable to the researcher to manipulate the genome. Although LV can be produced from stable packaging cell lines and/or in suspension culture, by and far, most LV vectors are produced using adherent 293 T cells grown in plasticware and production plasmids transiently transfected with either PEI or Calcium Phosphate. The media is usually changed and un-concentrated vector supernatant collected between 24 and 48 h post-transfection. The supernatant may then be purified by Mustang Q chromatography, concentrated by Tangential Flow Filtration, and finally diafiltered into the final formulation buffer of choice. Here we describe a pilot scale method for the manufacture of a Lentiviral vector that purifies and concentrates approximately 6 L of un-concentrated LV supernatant to approximately 150 mL. Typical titers for most vector constructs range between 1 × 108 and 1 × 109 infectious particles per mL. This method may be performed reiteratively to increase total volume or can be further scaled up to increase yield.

Interferon γ and α Have Differential Effects on SAMHD1, a Potent Antiviral Protein, in Feline Lymphocytes.

Sterile alpha motif and histidine/aspartic domain-containing protein 1 (SAMHD1) is a protein with anti-viral, anti-neoplastic, and anti-inflammatory properties. By degrading cellular dNTPs to constituent deoxynucleoside and free triphosphate, SAMHD1 limits viral DNA synthesis and prevents replication of HIV-1 and some DNA viruses such as HBV, vaccinia, and HSV-1. Recent findings suggest SAMHD1 is broadly active against retroviruses in addition to HIV-1, such as HIV-2, FIV, BIV, and EIAV. Interferons are cytokines produced by lymphocytes and other cells that induce a wide array of antiviral proteins, including some with activity again lentiviruses. Here we evaluated the role of IFNs on SAMHD1 gene expression, transcription, and post-translational modification in a feline CD4+ T cell line (FeTJ) and in primary feline CD4+ T lymphocytes. SAMHD1 mRNA in FetJ cells increased in a dose-related manner in response to IFNγ treatment concurrent with increased nuclear localization and phosphorylation. IFNα treatment induced SAMHD1 mRNA but did not significantly alter SAMHD1 protein detection, phosphorylation, or nuclear translocation. In purified primary feline CD4+ lymphocytes, IL2 supplementation increased SAMHD1 expression, but the addition of IFNγ did not further alter SAMHD1 protein expression or nuclear localization. Thus, the effect of IFNγ on SAMHD1 expression is cell-type dependent, with increased translocation to the nucleus and phosphorylation in FeTJ but not primary CD4+ lymphocytes. These findings imply that while SAMH1 is inducible by IFNγ, overall activity is cell type and compartment specific, which is likely relevant to the establishment of lentiviral reservoirs in quiescent lymphocyte populations.

Manufacture of Third-Generation Lentivirus for Preclinical Use, with Process Development Considerations for Translation to Good Manufacturing Practice.

Lentiviral vectors are used in laboratories around the world for in vivo and ex vivo delivery of gene therapies, and increasingly clinical investigation as well as preclinical applications. The third-generation lentiviral vector system has many advantages, including high packaging capacity, stable gene expression in both dividing and post-mitotic cells, and low immunogenicity in the recipient organism. Yet, the manufacture of these vectors is challenging, especially at high titers required for direct use in vivo, and further challenges are presented by the process of translating preclinical gene therapies toward manufacture of products for clinical investigation. The goals of this paper are to report the protocol for manufacturing high-titer third-generation lentivirus for preclinical testing and to provide detailed information on considerations for translating preclinical viral vector manufacture toward scaled-up platforms and processes in order to make gene therapies under Good Manufacturing Practice that are suitable for clinical trials.

High-sensitivity Detection of Micrometastases Generated by GFP Lentivirus-transduced Organoids Cultured from a Patient-derived Colon Tumor.

Despite current advances in human colorectal cancer (CRC) treatment, few radical therapies are effective for the late stages of CRC. To overcome this clinical challenge, tumor xenograft mouse models using long-established human carcinoma cell lines and many transgenic mouse models with tumors have been developed as preclinical models. They partially mimic the features of human carcinomas, but often fail to recapitulate the key aspects of human malignancies including invasion and metastasis. Thus, alternative models that better represent the malignant progression in human CRC have long been awaited. We herein show generation of patient-derived tumor xenografts (PDXs) by subcutaneous implantation of small CRC fragments surgically dissected from a patient. The colon PDXs develop and histopathologically resemble the CRC in the patient. However, few spontaneous micrometastases are detectable in conventional cross-sections of affected distant organs in the PDX model. To facilitate the detection of metastatic dissemination into distant organs, we extracted the tumor organoid cells from the colon PDXs in culture and infected them with GFP lentivirus prior to injection into highly immunodeficient NOD/Shi-scid IL2Rγnull (NOG) mice. Orthotopically injected PDX-derived CRC organoid cells consistently form primary tumors positive for GFP in recipient mice. Moreover, spontaneously developing micrometastatic colonies expressing GFP are notably detected in the lungs of these mice by fluorescence microscopy. Moreover, intrasplenic injection of CRC organoids frequently produces hepatic colonization. Taken together, these findings indicate GFP-labelled PDX-derived CRC organoid cells to be visually detectable during a multistep process termed the invasion-metastasis cascade. The described protocols include the establishment of PDXs of human CRC and 3D culture of the corresponding CRC organoid cells transduced by GFP lentiviral particles.

Lentiviral vector design using alternative RNA export elements.

BACKGROUND: Lentiviral vectors have been designed with complex RNA export sequences in both the integrating and packaging plasmids in order to co-ordinate efficient vector production. Recent studies have attempted to replace the existing complex rev/RRE system with a more simplistic RNA export system from simple retroviruses to make these vectors in a rev-independent manner. RESULTS: Towards this end, lentiviral transfer plasmids were modified with various cis-acting DNA elements that co-ordinate RNA export during viral production to determine their ability to affect the efficiency of vector titer and transduction in different immortalized cell lines in vitro. It was found that multiple copies of the constitutive transport element (CTE) originating from different simian retroviruses, including simian retrovirus type 1 (SRV-1) and type-2 (SRV-2) and Mason-Pfizer (MPV) could be used to eliminate the requirement for the rev responsive element (RRE) in the transfer and packaging plasmids with titers >106 T.U./mL (n = 4-8 preparations). The addition of multiple copies of the murine intracisternal type A particle, the woodchuck post-regulatory element (WPRE), or single and dual copies of the simian CTE had minimal effect on viral titer. Immortalized cell lines from different species were found to be readily transduced by VSV-G pseudotyped lentiviral vectors containing the multiple copies of the CTE similar to the findings in HeLa cells, although the simian-derived CTE were found to have a lower infectivity into murine cell lines compared to the other species. CONCLUSION: These studies demonstrated that the rev-responsive element (RRE) could be replaced with other constitutive transport elements to produce equivalent titers using lentivectors containing the RRE sequence in vitro, but that concatemerization of the CTE or the close proximity of RNA export sequences was needed to enhance vector production.