Predictive modelling reveals Australian continental risk hotspots for marine debris interactions with key threatened species.

Anthropogenic debris is a global threat that impacts threatened species through various lethal and sub-lethal consequences, as well as overall ecosystem health. This study used a database of over 24,000 beach surveys of marine debris collated by the Australian Marine Debris Initiative from 2012 to 2021, with two key objectives: (1) identify variables that most influence the occurrence of debris hotspots on a continental scale and (2) use these findings to identify likely hotspots of interaction between threatened species and marine debris. The number of particles found in each beach survey was modelled alongside fifteen biological, social, and physical spatial variables including land use, physical oceanography, population, rainfall, distance to waste facilities, ports, and mangroves to identify the significant drivers of debris deposition. The model of best fit for predicting debris particle abundance was calculated using a generalized additive model. Overall, debris was more abundant at sites near catchments with high annual rainfall (mm), intensive land use (km2), and that were nearer to ports (km) and mangroves (km). These results support previous studies which state that mangroves are a significant sink for marine debris, and that large ports and urbanized catchments are significant sources for marine debris. We illustrate the applicability of these models by quantifying significant overlap between debris hotspots and the distributions for four internationally listed threatened species that exhibit debris interactions; green turtle (26,868 km2), dugong (16,164 km2), Australian sea lion (2903 km2) and Flesh-footed Shearwater (2413 km2). This equates to less than 1% (Flesh-footed Shearwater, Australian sea lion), over 2% (green sea turtle) and over 5% (dugong) of their habitat being identified as areas of high risk for marine debris interactions. The results of this study hold practical value, informing decision-making processes, managing debris pollution at continental scales, as well as identifying gaps in species monitoring.

Hotspots of Floating Plastic Particles across the North Pacific Ocean.

The pollution of the marine environment with plastic debris is expected to increase, where ocean currents and winds cause their accumulation in convergence zones like the North Pacific Subtropical Gyre (NPSG). Surface-floating plastic (>330 µm) was collected in the North Pacific Ocean between Vancouver (Canada) and Singapore using a neuston catamaran and identified by Fourier-transform infrared spectroscopy (FT-IR). Baseline concentrations of 41,600-102,700 items km-2 were found, dominated by polyethylene and polypropylene. Higher concentrations (factors 4-10) of plastic items occurred not only in the NPSG (452,800 items km-2) but also in a second area, the Papaha̅naumokua̅kea Marine National Monument (PMNM, 285,200 items km-2). This second maximum was neither reported previously nor predicted by the applied ocean current model. Visual observations of floating debris (>5 cm; 8-2565 items km-2 and 34-4941 items km-2 including smaller "white bits") yielded similar patterns of baseline pollution (34-3265 items km-2) and elevated concentrations of plastic debris in the NPSG (67-4941 items km-2) and the PMNM (295-3748 items km-2). These findings suggest that ocean currents are not the only factor provoking plastic debris accumulation in the ocean. Visual observations may be useful to increase our knowledge of large-scale (micro)plastic pollution in the global oceans.

Nesting material adaptation of native bird species with anthropogenic litter along an urbanization gradient in Pakistan.

Rapid urbanization and associated waste generation have become a mounting ecological concern for wildlife, especially avian communities. Research has primarily focused on investigating the impacts of human activities on marine birds with comparatively less focus on terrestrial species that live in far more anthropized environments and are at significant risk. Our study has explored the abundance and characteristics of anthropogenic litter in 70 nests of four generalist bird species: Bank Myna (Acridotheres ginginianus), Common Myna (Acridotheres tristis), Black Kite (Milvus migrans) and House Crow (Corvus splendens), within the city of Lahore (Pakistan) and its surroundings, by determining and following an urbanization gradient. The overall frequency of litter occurrence (FLO%) for all the sampled nests was 89%. Over 80% of the recorded litter items consisted of plastic materials, primarily dominated by sheet-like plastics. There was a strong association between fabric and Black Kite nests, and metal and House Crow nests. Litter incorporation increased across the gradient from rural to urban habitats. The highest FLO% was found in nests sampled from waste dumping sites and urban sites (95%-100%), where anthropogenic influence was more intense. The high level of litter incorporation is potentially indicative of a species' adaptive response to urbanization, associated with the decline in natural nesting material and availability of anthropogenic litter. These findings highlight the need for strengthening the existing global database for terrestrial litter and its effect on wildlife and devising policy actions for better waste management and conservation of natural ecosystem balance.

Do birds select the plastics debris used for nest construction? A case study in a Mediterranean agricultural landscape.

Plastic pollution is becoming a global problem due to its ubiquitous occurrence and the impacts detected for many species. However, the research about plastics in nests of terrestrial bird species has remained relatively overlooked in comparison to those devoted to marine ecosystems. Here we study the occurrence and patterns of use of anthropogenic material in nests of two passerine birds, the Eurasian magpie (Pica pica) and the European serin (Serinus serinus), breeding in an orange tree cultivation in Mediterranean Spain. Our results show that both species use extensively plastic debris as nest material; almost 71% of the European serin nests and 96% of nests of Eurasian magpies contained plastic debris. Furthermore, by analyzing the plastic debris availability in the agricultural landscape surveyed we confirmed a selection pattern in the two species. Thus, both species preferably select plastic filaments over other plastic debris. The Eurasian magpie does not select plastic based on size or color but the European serin avoid black plastics prefer smaller fragments in comparison to the average size available. Moreover, we suggest the apparent similarity of plastic filaments with the natural materials typically used by these species, as well as how they use the plastic in their nests could influence their selection behavior. More studies focused on terrestrial birds inhabiting human modified habitats could offer a deeper approach to how plastic debris interacts with wildlife in different ways.

A dye elution method for the quantification of insecticidal crystal proteins from Bacillus thuringiensis and its compatibility with the presence of agro-industrial raw materials and waste products.

The insecticidal crystal proteins produced by Bacillus thuringiensis during sporulation are active ingredients against lepidopteran, dipteran, and coleopteran insects. Several methods have been reported for their quantification, such as crystal counting, ELISA, and SDS-PAGE/densitometry. One of the major tasks in industrial processes is the analysis of raw material dependency and costs. Thus, the crystal protein quantification method is expected to be compatible with the presence of complex and inexpensive culture medium components. This work presents a revalidated elution-based method for the quantification of insecticidal crystal proteins produced by the native strain B. thuringiensis RT. To quantify proteins, a calibration curve was generated by varying the amount of BSA loaded into SDS-PAGE gels. First, SDS-PAGE was performed for quality control of the bioinsecticide. Then, the stained protein band was excised from 10% polyacrylamide gel and the protein-associated dye was eluted with an alcoholic solution of SDS (3% SDS in 50% isopropanol) during 45 min at 95°C. This protocol was a sensitive procedure to quantify proteins in the range of 2.0-10.0 µg. As proof of concept, proteins of samples obtained from a complex fermented broth were separated by SDS-PAGE. Then, Cry1 and Cry2 proteins were properly quantified.

Thermodynamic feasibility of shipboard conversion of marine plastics to blue diesel for self-powered ocean cleanup.

Collecting and removing ocean plastics can mitigate their environmental impacts; however, ocean cleanup will be a complex and energy-intensive operation that has not been fully evaluated. This work examines the thermodynamic feasibility and subsequent implications of hydrothermally converting this waste into a fuel to enable self-powered cleanup. A comprehensive probabilistic exergy analysis demonstrates that hydrothermal liquefaction has potential to generate sufficient energy to power both the process and the ship performing the cleanup. Self-powered cleanup reduces the number of roundtrips to port of a waste-laden ship, eliminating the need for fossil fuel use for most plastic concentrations. Several cleanup scenarios are modeled for the Great Pacific Garbage Patch (GPGP), corresponding to 230 t to 11,500 t of plastic removed yearly; the range corresponds to uncertainty in the surface concentration of plastics in the GPGP. Estimated cleanup times depends mainly on the number of booms that can be deployed in the GPGP without sacrificing collection efficiency. Self-powered cleanup may be a viable approach for removal of plastics from the ocean, and gaps in our understanding of GPGP characteristics should be addressed to reduce uncertainty.

Valorisation of Agri-Food Waste for Bioactive Compounds: Recent Trends and Future Sustainable Challenges.

Worldwide, a massive amount of agriculture and food waste is a major threat to the environment, the economy and public health. However, these wastes are important sources of phytochemicals (bioactive), such as polyphenols, carotenoids, carnitine, coenzymes, essential oils and tocopherols, which have antioxidant, antimicrobial and anticarcinogenic properties. Hence, it represents a promising opportunity for the food, agriculture, cosmetics, textiles, energy and pharmaceutical industries to develop cost effective strategies. The value of agri-food wastes has been extracted from various valuable bioactive compounds such as polyphenols, dietary fibre, proteins, lipids, vitamins, carotenoids, organic acids, essential oils and minerals, some of which are found in greater quantities in the discarded parts than in the parts accepted by the market used for different industrial sectors. The value of agri-food wastes and by-products could assure food security, maintain sustainability, efficiently reduce environmental pollution and provide an opportunity to earn additional income for industries. Furthermore, sustainable extraction methodologies like ultrasound-assisted extraction, pressurized liquid extraction, supercritical fluid extraction, microwave-assisted extraction, pulse electric field-assisted extraction, ultrasound microwave-assisted extraction and high hydrostatic pressure extraction are extensively used for the isolation, purification and recovery of various bioactive compounds from agri-food waste, according to a circular economy and sustainable approach. This review also includes some of the critical and sustainable challenges in the valorisation of agri-food wastes and explores innovative eco-friendly methods for extracting bioactive compounds from agri-food wastes, particularly for food applications. The highlights of this review are providing information on the valorisation techniques used for the extraction and recovery of different bioactive compounds from agricultural food wastes, innovative and promising approaches. Additionally, the potential use of these products presents an affordable alternative towards a circular economy and, consequently, sustainability. In this context, the encapsulation process considers the integral and sustainable use of agricultural food waste for bioactive compounds that enhance the properties and quality of functional food.

Green Methods to Recover Bioactive Compounds from Food Industry Waste: A Sustainable Practice from the Perspective of the Circular Economy.

The worrying and constant increase in the quantities of food and beverage industry by-products and wastes is one of the main factors contributing to global environmental pollution. Since this is a direct consequence of continuous population growth, it is imperative to reduce waste production and keep it under control. Re-purposing agro-industrial wastes, giving them new life and new directions of use, is a good first step in this direction, and, in global food production, vegetables and fruits account for a significant percentage. In this paper, brewery waste, cocoa bean shells, banana and citrus peels and pineapple wastes are examined. These are sources of bioactive molecules such as polyphenols, whose regular intake in the human diet is related to the prevention of various diseases linked to oxidative stress. In order to recover such bioactive compounds using more sustainable methods than conventional extraction, innovative solutions have been evaluated in the past decades. Of particular interest is the use of deep eutectic solvents (DESs) and compressed solvents, associated with green techniques such as microwave-assisted extraction (MAE), ultrasonic-assisted extraction (UAE), pressurized liquid extraction (PLE) and pulsed-electric-field-assisted extraction (PEF). These novel techniques are gaining importance because, in most cases, they allow for optimizing the extraction yield, quality, costs and time.

Generation of Eroded Nanoplastics from Domestic Wastes and Their Impact on Macrophage Cell Viability and Gene Expression.

This study reports an innovative approach for producing nanoplastics (NP) from various types of domestic waste plastics without the use of chemicals. The plastic materials used included water bottles, styrofoam plates, milk bottles, centrifuge tubes, to-go food boxes, and plastic bags, comprising polyethylene terephthalate (PET), polystyrene (PS), polypropylene (PP), high-density polyethylene (HDPE), and Poly (Ethylene-co-Methacrylic Acid) (PEMA). The chemical composition of these plastics was confirmed using Raman and FTIR spectroscopy, and they were found to have irregular shapes. The resulting NP particles ranged from 50 to 400 nm in size and demonstrated relative stability when suspended in water. To assess their impact, the study investigated the effects of these NP particulates on cell viability and the expression of genes involved in inflammation and oxidative stress using a macrophage cell line. The findings revealed that all types of NP reduced cell viability in a concentration-dependent manner. Notably, PS, HDPE, and PP induced significant reductions in cell viability at lower concentrations, compared to PEMA and PET. Moreover, exposure to NP led to differential alterations in the expression of inflammatory genes in the macrophage cell line. Overall, this study presents a viable method for producing NP from waste materials that closely resemble real-world NP. Furthermore, the toxicity studies demonstrated distinct cellular responses based on the composition of the NP, shedding light on the potential environmental and health impacts of these particles.

Spatiotemporal variation in macroplastic abundances along a subtropical Austral river system.

Plastic pollution is a ubiquitous problem that poses a threat to society and the environment. The issue is especially pervasive in the aquatic environment, where large amounts of plastic debris accumulate from numerous anthropogenic pathways. Relatively little is known about the extent of macroplastics in African subtropical Austral rivers, where management strategies are lacking. This study quantifies and compares the variation in macroplastic abundances along the Mvudi River, South Africa, over four sites and four seasons. We observed a non-significant difference in macroplastic abundance and variation across sites and seasons, with pollution therefore widespread across these contexts. However, the diversity of plastic debris (i.e. γ-diversity value) decreased generally along sites, with most macroplastic items being collected during winter, and fewer macroplastic during autumn. We observed high abundances of macroplastic debris on the shoreline compared to the mainstream, with high proportional abundances of plastic bags and film (> 57.8%) macroplastic physical type across all sites and seasons. We also observed a high proportional abundance of the polymer polypropylene (> 25.3%) across seasons. The information derived from this study serves as the baseline for understanding seasonal variations in plastic debris and their driving factors on this and other subtropical Austral rivers.

Assessing the impact of banning the single-use plastic carrier bags: a case study for Kenyan marine environment looking at macro, meso, and microplastics.

Poor waste management and unsustainable institutional and individual behaviors, have led to the accumulation of plastic litter in many habitats worldwide. Assessment of plastic pollution in Kenyan marine environment was conducted focusing on the impact of banning the single-use plastic carrier bags in Kenya. The quantification, composition, and distribution of plastics were determined at nine (9) beaches along Kenyan coastline using standing stock method. A total of 750 plastic items were collected and categorized with only 47 pieces being single-use plastic carrier bags. A great number of plastics (n = 383), were identified by their original use, with packaging plastics being the most common (n = 155). Macroplastics were the overall dominant plastics at 76%, mesoplastics, 21% and microplastics, 3%, which were altogether dominated by low-density polyethylene (LDPE) at (46%), followed by polypropylene (PP), 30%; polyethylene tetraphthalate (PET), 9%; polyvinyl chloride (PVC), 8%; and polystyrene (PS), 7%. The absence of identifiable single-use plastic carrier bags in 6 out of 9 beaches signified the effectiveness of the ban in Kenya. Monitoring of trends and sources of plastic debris is encouraged to help enhance the science-policy linkage aimed at reducing marine plastic pollution.

Low-Density Plastic Debris Dispersion beneath the Mediterranean Sea Surface.

Plastic is a widespread marine pollutant, with most studies focusing on the distribution of floating plastic debris at the sea surface. Recent evidence, however, indicates a significant presence of such low density plastic in the water column and at the seafloor, but information on its origin and dispersion is lacking. Here, we studied the pathways and fate of sinking plastic debris in the Mediterranean Sea, one of the most polluted world seas. We used a recent Lagrangian plastic-tracking model, forced with realistic parameters, including a maximum estimated sinking speed of 7.8 m/d. Our simulations showed that the locations where particles left the surface differed significantly from those where they reached the seafloor, with lateral transport distances between 119 and 282 km. Furthermore, 60% of particles deposited on the bottom coastal strip (20 km wide) were released from vessels, 20% from the facing country, and 20% from other countries. Theoretical considerations furthermore suggested that biological activities potentially responsible for the sinking of low density plastic occur throughout the water column. Our findings indicate that the responsibility for seafloor plastic pollution is shared among Mediterranean countries, with potential impact on pelagic and benthic biota.

New Methods for the Quantification of Ingested Nano- and Ultrafine Plastics in Seabirds.

Plastic ingestion has been documented in a plethora of taxa. However, there is a significant gap in the detection of nano- and ultrafine particles due to size limitations of commonly used techniques. Using two Australian seabird species as case studies, the flesh-footed shearwater (FFSH) Ardenna carneipes and short-tailed shearwater (STSH) A. tenuirostris, we tested a novel approach of flow cytometry to quantify ingested particles <70 µm in the fecal precursor (guano; colon and cloacal contents) of both species. This method provided the first baseline data set for these species for plastics in the 200 nm-70 µm particle size ranges and detected a mean of 553.50 ± 91.21 and 350.70 ± 52.08 plastics (count/mg fecal precursor, wet mass) in STSH and FFSH, respectively, whereas Fourier transform infrared spectroscopy (FT-IR) provided accurate measurements of polymer compositions and quantities in the size range above 5.5 × 5.5 µm2. The abundance of nano- and ultrafine particles in the guano (count/mg) was not significantly different between species (p-value = 0.051), suggesting that foraging distribution or prey items, but not species, may contribute to the consumption of small plastics. In addition, there was no correlation between macroplastics in the stomach compared to the fecal precursor, indicating that small particles are likely bioaccumulating (e.g., through shedding and digestive fragmentation) and/or being directly ingested. Combining flow cytometry with FT-IR provides a powerful quantitative and qualitative analysis tool for detecting particles orders of magnitude smaller than that are currently explored with wider applications across taxa and marine environments.

Upcycling chitin-containing waste into organonitrogen chemicals via an integrated process.

Chitin is the most abundant renewable nitrogenous material on earth and is accessible to humans in the form of crustacean shell waste. Such waste has been severely underutilized, resulting in both resource wastage and disposal issues. Upcycling chitin-containing waste into value-added products is an attractive solution. However, the direct conversion of crustacean shell waste-derived chitin into a wide spectrum of nitrogen-containing chemicals (NCCs) is challenging via conventional catalytic processes. To address this challenge, in this study, we developed an integrated biorefinery process to upgrade shell waste-derived chitin into two aromatic NCCs that currently cannot be synthesized from chitin via any chemical process (tyrosine and l-DOPA). The process involves a pretreatment of chitin-containing shell waste and an enzymatic/fermentative bioprocess using metabolically engineered Escherichia coli The pretreatment step achieved an almost 100% recovery and partial depolymerization of chitin from shrimp shell waste (SSW), thereby offering water-soluble chitin hydrolysates for the downstream microbial process under mild conditions. The engineered E. coli strains produced 0.91 g/L tyrosine or 0.41 g/L l-DOPA from 22.5 g/L unpurified SSW-derived chitin hydrolysates, demonstrating the feasibility of upcycling renewable chitin-containing waste into value-added NCCs via this integrated biorefinery, which bypassed the Haber-Bosch process in providing a nitrogen source.

Marine Litter Tracking System: A Case Study with Open-Source Technology and a Citizen Science-Based Approach.

It is well established that most of the plastic pollution found in the oceans is transported via rivers. Unfortunately, the main processes contributing to plastic and debris displacement through riparian systems is still poorly understood. The Marine Litter Drifter project from the Arno River aims at using modern consumer software and hardware technologies to track the movements of real anthropogenic marine debris (AMD) from rivers. The innovative "Marine Litter Trackers" (MLT) were utilized as they are reliable, robust, self-powered and they present almost no maintenance costs. Furthermore, they can be built not only by those trained in the field but also by those with no specific expertise, including high school students, simply by following the instructions. Five dispersion experiments were successfully conducted from April 2021 to December 2021, using different types of trackers in different seasons and weather conditions. The maximum distance tracked was 2845 km for a period of 94 days. The activity at sea was integrated by use of Lagrangian numerical models that also assisted in planning the deployments and the recovery of drifters. The observed tracking data in turn were used for calibration and validation, recursively improving their quality. The dynamics of marine litter (ML) dispersion in the Tyrrhenian Sea is also discussed, along with the potential for open-source approaches including the "citizen science" perspective for both improving big data collection and educating/awareness-raising on AMD issues.

Leaching of select per-/poly-fluoroalkyl substances, pharmaceuticals, and hormones through soils amended with composted biosolids.

The use of organic amendments to enhance soil health is increasingly being identified as a strategy to improve residential landscapes while also reducing the need for external inputs (e.g., fertilizers, irrigation). Composted biosolids are a re-purposed waste product that can be used in organic amendments to improve the overall sustainability of a municipality by enhancing residential soil carbon content while simultaneously reducing waste materials. However, the biosolids-based feedstock of these compost products has the potential to be a source of organic contaminants. We conducted a laboratory-based soil column experiment to evaluate the potential for different commercially available compost products to act as a source of emerging organic contaminants in residential landscapes. We compared two biosolids-based compost products, a manure-based compost product, and a control (no compost) treatment by irrigating soil columns for 30 days and collecting daily leachate samples to quantify leaching rates of six hormones, eight pharmaceuticals, and seven per- and polyfluoroalkyl substances (PFAS). Detection of hormones and pharmaceuticals was rare, suggesting that compost amendments are likely not a major source of these contaminants to groundwater resources. In contrast, we detected three of the seven PFAS compounds in leachate samples throughout the study. Perfluorohexanoic acid (PFHxA) was more likely to leach from biosolids-based compost treatments than other treatments (p < 0.05) and perfluorobutane sulfonate (PFBS) was only detected in biosolids-based treatments (although PFBS concentrations did not significantly differ among treatments). In contrast, perfluorooctanoic acid (PFOA) was commonly detected across all treatments (including controls), suggesting potential PFOA experimental contamination. Overall, these results demonstrate that commercially available composted biosolids amendments are likely not a major source of hormone and pharmaceutical contamination. The detection of PFHxA at significantly higher concentrations in biosolids treatments suggests that biosolids-based composts may act as sources of PFHxA to the environment. However, concentrations of multiple PFAS compounds found in leachate in this study were lower than concentrations found in known PFAS hotspots. Therefore, there is potential for environmental contamination from PFAS leaching from composted biosolids, but leachate concentrations are low which should be considered in risk-benefit analyses when considering whether or not to use composted biosolids as an organic amendment to enhance residential soil health.

Value-Added Products from Coffee Waste: A Review.

Coffee waste is often viewed as a problem, but it can be converted into value-added products if managed with clean technologies and long-term waste management strategies. Several compounds, including lipids, lignin, cellulose and hemicelluloses, tannins, antioxidants, caffeine, polyphenols, carotenoids, flavonoids, and biofuel can be extracted or produced through recycling, recovery, or energy valorization. In this review, we will discuss the potential uses of by-products generated from the waste derived from coffee production, including coffee leaves and flowers from cultivation; coffee pulps, husks, and silverskin from coffee processing; and spent coffee grounds (SCGs) from post-consumption. The full utilization of these coffee by-products can be achieved by establishing suitable infrastructure and building networks between scientists, business organizations, and policymakers, thus reducing the economic and environmental burdens of coffee processing in a sustainable manner.

A New Monitoring Strategy of Large Micro-, Meso- and Macro-Litter: A Case Study on Sandy Beaches of Baltic Lagoons and Estuaries.

Coastal lagoons and estuaries are hot spots to accumulate river basin-related plastic leakage. However, no official methodology exists to investigate their relatively short, rich in organic matter beaches, and the knowledge of pollution of lagoons is scarce worldwide. This study aimed to develop a methodology suitable for large micro (2-5 mm), meso (5-25 mm), and macro-litter (>25 mm) monitoring at sandy inner-coastal waters that would provide comparable results to the intensively used OSPAR 100 m method. The method proposed in this study is based on two 40 m2 rectangular polygons placed on the tidal accumulation zone for macro-litter enumeration and two 1 m2 squares for micro- and meso-litter. This method has been applied to 23 beaches from three inner-coastal waters of the Baltic Sea. This study shows that the litter densities between lagoons and bays differ and depend on the river output intensity and the retention capacity. The "Construction material", "Plastic pieces 2-5 mm", and "Plastic pieces 5-25 mm" were among this study's top ten most common litter items. Experts allocated these items to the "Land based industry and trade" source, which indicates that lagoons and bays through the connection of the major rivers could be a potential sink of land-based litter. An evident strength of the methodology established is the capability to determine litter of all sizes, low-cost and time-efficiency, implementable for volunteer-based monitoring; provides comparable results to the most commonly used methods for investigating litter pollution on coastal beaches.

Gulls as potential sentinels for urban litter: combining nest and GPS-tracking information.

The production of urban waste has increased in the past decades leading to its mishandling. The effects on public health, economy, and wildlife that waste mismanagement can have are forcing governments to increase their efforts in detecting and mitigating the presence of waste. Identifying and monitoring sentinel species to assess the presence of urban litter could be a cost-effective option. Thus, analyzing the nest composition of yellow-legged gulls from an urban population inhabiting a very high populated city (Barcelona, Spain), and combining this information with accurate GPS tracking data, provides a potential tool to monitor the presence of marine and terrestrial litter over time. The results revealed the highest presence of debris in the nests of a seabird ever recorded. All the nests examined contained anthropogenic waste, with plastic items present in all of them. Crossing the nest composition with GPS tracking movements confirmed that the waste to build the nests was collected in the urban area and not in other environments surrounding the city. Then, the nest waste composition may be a good indicator of waste mismanagement and advise the municipalities to improve waste management and recycling strategies for the different types of litter. Using gulls breeding in cities as sentinel species and, in particular, the study of their nest composition, may provide essential data to decision-making stakeholders to adopt a One Health approach and help improve not only the environment's health but also the health of those who live in it.

Land-derived litter load to the Indian Ocean: a case study in the Cimandiri River, southern West Java, Indonesia.

The first study related to the characteristics of the riverine litter was carried out at the mouth of the Cimandiri River in the southern West Java to provide a national database, as mandated in the Indonesian Presidential Regulation 83/2018 concerning the handling of marine debris. We examined floating riverine litter entering the South Java Sea at Cimandiri River outlets four times between December 2020 and October 2021 using a Thomsea 1 T trawl-net. The amount of litter collected tended to rise throughout the sampling period. Daily floating riverine litter released into the South Java Sea was estimated to be 285,931 ± 133.70 items or 307 ± 192.69 kg. Our monitoring data revealed no sampling period differences in litter release into the South Java Sea with no correlation with rainfall. Our data indicate that plastics are the most single abundant type of floating riverine litter entering the South Java Sea from the Cimandiri River, accounting for 99.92% of abundance (285,701 ± 133,464.75 items per day) or 97.78% in terms of weight (300 ± 181.99 kg per day) of the total litter collected. As the Cimandiri River is one of the major rivers with an outlet in the south of Java, this land-derived litter information could be an archetype for riverine ecosystems in the nation and region.