Gibberellin signaling regulates lignin biosynthesis to modulate rice seed shattering.

The elimination of seed shattering was a key step in rice (Oryza sativa) domestication. In this paper, we show that increasing the gibberellic acid (GA) content or response in the abscission region enhanced seed shattering in rice. We demonstrate that SLENDER RICE1 (SLR1), the key repressor of GA signaling, could physically interact with the rice seed shattering-related transcription factors quantitative trait locus of seed shattering on chromosome 1 (qSH1), O. sativa HOMEOBOX 15 (OSH15), and SUPERNUMERARY BRACT (SNB). Importantly, these physical interactions interfered with the direct binding of these three regulators to the lignin biosynthesis gene 4-COUMARATE: COENZYME A LIGASE 3 (4CL3), thereby derepressing its expression. Derepression of 4CL3 led to increased lignin deposition in the abscission region, causing reduced rice seed shattering. Importantly, we also show that modulating GA content could alter the degree of seed shattering to increase harvest efficiency. Our results reveal that the "Green Revolution" phytohormone GA is important for regulating rice seed shattering, and we provide an applicable breeding strategy for high-efficiency rice harvesting.

Vaccination Shapes Within-Host SARS-CoV-2 Diversity of Omicron BA.2.2 Breakthrough Infection.

BACKGROUND: Low-frequency intrahost single-nucleotide variants of SARS-CoV-2 have been recognized as predictive indicators of selection. However, the impact of vaccination on the intrahost evolution of SARS-CoV-2 remains uncertain at present. METHODS: We investigated the genetic variation of SARS-CoV-2 in individuals who were unvaccinated, partially vaccinated, or fully vaccinated during Shanghai's Omicron BA.2.2 wave. We substantiated the connection between particular amino acid substitutions and immune-mediated selection through a pseudovirus neutralization assay or by cross-verification with the human leukocyte antigen-associated T-cell epitopes. RESULTS: In contrast to those with immunologic naivety or partial vaccination, participants who were fully vaccinated had intrahost variant spectra characterized by reduced diversity. Nevertheless, the distribution of mutations in the fully vaccinated group was enriched in the spike protein. The distribution of intrahost single-nucleotide variants in individuals who were immunocompetent did not demonstrate notable signs of positive selection, in contrast to the observed adaptation in 2 participants who were immunocompromised who had an extended period of viral shedding. CONCLUSIONS: In SARS-CoV-2 infections, vaccine-induced immunity was associated with decreased diversity of within-host variant spectra, with milder inflammatory pathophysiology. The enrichment of mutations in the spike protein gene indicates selection pressure exerted by vaccination on the evolution of SARS-CoV-2.

The functional divergence of homologous GPAT9 genes contributes to the erucic acid content of Brassica napus seeds.

BACKGROUND: The early allopolyploid Brassica napus was a hybrid of two Brassica species, that had undergone a whole genome duplication event followed by genome restructuring, including deletions and small scale duplications. A large number of homologous genes appeared functional divergence during species domestication. Due to the high conservation of de novo glycerolipid biosynthesis, multiple homologues of glycerol-3-phosphate acyltransferases (GPATs) have been found in B. napus. Moreover, the functional variances among these homologous GPAT-encoding genes are unclear. RESULTS: In this study, four B. napus homologous genes encoding glycerol-3-phosphate acyltransferase 9 (BnaGPAT9) were characterized. Although a bioinformatics analysis indicated high protein sequence similarity, the homologues demonstrated tissue-specific expression patterns and functional divergence. Yeast genetic complementation assays revealed that BnaGPAT9-A1/C1 homologues but not BnaGPAT9-A10/C9 homologues encoded functional GPAT enzymes. Furthermore, a single nucleotide polymorphism of BnaGPAT9-C1 that occurred during the domestication process was associated with enzyme activity and contributed to the fatty acid composition. The seed-specific expression of BnGPAT9-C11124A increased the erucic acid content in the transformant seeds. CONCLUSIONS: This study revealed that BnaGPAT9 gene homologues evolved into functionally divergent forms with important roles in erucic acid biosynthesis.

Simulation study on functional group-modified Ni-MOF-74 for CH4/N2 adsorption separation.

This study employs grand canonical Monte Carlo (GCMC) simulations to investigate the impact of functional group modifications (CH3, OH, NH2, and OLi) on the adsorption performance of CH4/N2 on Ni-MOF-74. The results revealed that functional group modifications significantly increased the adsorption capacity of Ni-MOF-74 for both CH4 and N2. The packed methyl groups in CH3-Ni-MOF-74 create an environment conducive to CH4, leading to the highest CH4 adsorption capacity. The electrostatic potential distribution indicates that the strong electron-donating effect introduced by the alkali metal Li results in the highest electrostatic potential gradient in Li-O-Ni-MOF-74, leading to the strongest adsorption of N2, this is unfavorable for CH4/N2 separation. At 1500 kPa the selectivity order of adsorbents for mixed gases was as follows: CH3-Ni-MOF-74 > NH2-Ni-MOF-74 > OH-Ni-MOF-74 > Ni-MOF-74 > Li-O-Ni-MOF-74. This study highlights that CH3-Ni-MOF-74 possesses optimal CH4 selectivity and adsorption performance. Given the current lack of research on functionalized MOF-74 for the separation of CH4 and N2, the findings of this study will serve as a theoretical guide and provide references for the applications of CH4 adsorption and CH4/N2 separation.

Endowing the Operability of Supercapacitors at High Temperatures by Regulating the Solvation Structure in Dilute Hybrid Electrolyte with Trimethyl Phosphate Cosolvent.

The redox stabilities of different oxygen donor solvents (C═O, P═O and S═O) and lithium salt anions for supercapacitors (SCs) electrolytes have been compared by calculating the frontier molecular orbital energy. Among six lithium difluoro(oxalate)borate (LiDFOB)-based mono-solvent electrolytes, the dilute LiDFOB-1,4-butyrolactone (GBL) electrolyte exhibits the highest operating voltage but suffers from electrolyte breakdown at elevated temperatures. Trimethyl phosphate (TMP) exhibits the highest redox stability and a strongly negative electrostatic potential (ESP), making it suitable for promoting the dissolution of LiDFOB as expected. Therefore, TMP is selected as a co-solvent into LiDFOB-GBL electrolyte to regulate Li+ solvation structure and improve the operability of electrolytes at high temperatures. The electrochemical stable potential window (ESPW) of 0.5 m LiDFOB-G/T(5/5) hybrid electrolyte can reach 5.230 V. The activated carbon (AC)-based symmetric SC using 0.5 m LiDFOB-G/T(5/5) hybrid electrolyte achieves a high energy density of 54.2 Wh kg-1 at 1.35 kW kg-1 and the capacitance retention reaches 89.2% after 10 000 cycles. The operating voltage of SC can be maintained above 2 V when the temperature rises to 60 °C.

Minimizing Voltage Losses via Synergistically Reducing Hetero-Interface Energy Offset for High Efficiency Perovskite Solar Cells.

The open circuit voltage (VOC) losses at multiple interfaces within perovskite solar cells (PSCs) limit the improvements in power conversion efficiency (PCE). Herein, a tailored strategy is proposed to reduce the energy offset at both hetero-interfaces within PSCs to decrease the VOC losses. For the interface of perovskite and electron transport layer where exists a mass of defects, it uses the pyromellitic acid to serve as a molecular bridge, which reduces non-radiative recombination and energy level offset. For the interface of perovskite and hole transport layer, which includes a passivator of PEAI, the detrimental effect (negative shift of work function) of PEAI passivation and optimizing the interface energy level alignment are neutralized by incorporating (2-(4-(bis(4-methoxyphenyl)amino)phenyl)-1-cyanovinyl)phosphonic acid. Owing to synergistically reduced hetero-interface energy offset, the PSCs achieve a PCE of 25.13%, and the VOC is increased from 1.134 to 1.174 V. In addition, the resulting PSCs possess enhanced stability, the unencapsulated PSCs can maintain ≈96% and ≈97% of their initial PCE after 2000 h of aging under ambient conditions and 210 h under operation conditions.

Harnessing Natural Evaporation for Electricity Generation using MOF-Based Nanochannels.

Functionalized nanochannels can convert environmental thermal energy into electrical energy by driving water evaporation. This process involves the interaction between the solid-liquid interface and the natural water evaporation. The evaporation-driven water potential effect is a novel green environmental energy capture technology that has a wide range of applications and does not depend on geographical location or environmental conditions, it can generate power as long as there is water, light, and heat. However, suitable materials and structures are needed to harness this natural process for power generation. MOF materials are an emerging field for water evaporation power generation, but there are still many challenges to overcome. This work uses MOF-801, which has high porosity, charged surface, and hydrophilicity, to enhance the output performance of evaporation-driven power generation. It can produce an open circuit voltage of ≈2.2 V and a short circuit current of ≈1.9 µA. This work has a simple structure, easy preparation, low-cost and readily available materials, and good stability. It can operate stably in natural environments with high practical value.

Viral and thermal lysis facilitates transmission of antibiotic resistance genes during composting.

While the distribution of extracellular ARGs (eARGs) in the environment has been widely reported, the factors governing their release remain poorly understood. Here, we combined multi-omics and direct experimentation to test whether the release and transmission of eARGs are associated with viral lysis and heat during cow manure composting. Our results reveal that the proportion of eARGs increased 2.7-fold during composting, despite a significant and concomitant reduction in intracellular ARG abundances. This relative increase of eARGs was driven by composting temperature and viral lysis of ARG-carrying bacteria based on metagenome-assembled genome (MAG) analysis. Notably, thermal lysis of mesophilic bacteria carrying ARGs was a key factor in releasing eARGs at the thermophilic phase, while viral lysis played a relatively stronger role during the non-thermal phase of composting. Furthermore, MAG-based tracking of ARGs in combination with direct transformation experiments demonstrated that eARGs released during composting pose a potential transmission risk. Our study provides bioinformatic and experimental evidence of the undiscovered role of temperature and viral lysis in co-driving the spread of ARGs in compost microbiomes via the horizontal transfer of environmentally released DNA. IMPORTANCE: The spread of antibiotic resistance genes (ARGs) is a critical global health concern. Understanding the factors influencing the release of extracellular ARGs (eARGs) is essential for developing effective strategies. In this study, we investigated the association between viral lysis, heat, and eARG release during composting. Our findings revealed a substantial increase in eARGs despite reduced intracellular ARG abundance. Composting temperature and viral lysis were identified as key drivers, with thermal lysis predominant during the thermophilic phase and viral lysis during non-thermal phases. Moreover, eARGs released during composting posed a transmission risk through horizontal gene transfer. This study highlights the significance of temperature and phage lysis in ARG spread, providing valuable insights for mitigating antibiotic resistance threats.

Rare-Earth Metalloligands for Low-Valent Cobalt Complexes: Fine Electronic Tuning via Co→RE Dative Interactions.

Rare-earth metalloligand supported low-valent cobalt complexes were synthesized by utilizing a small-sized heptadentate phosphinomethylamine LsNH3 and a large-sized arene-anchored hexadentate phosphinomethylamine LlArH3 ligand precursors. The RE(III)-Co(-I)-N2 (RE = Sc, Lu, Y, Gd, La) complexes containing rare-earth metals including the smallest Sc and largest La were characterized by multinuclear NMR spectroscopy, X-ray diffraction analysis, electrochemistry, and computational studies. The Co(-I)→RE(III) dative interactions were all polarized with major contributions from the 3dz2 orbital of the cobalt center, which was slightly affected by the identity of rare-earth metalloligands. The IR spectroscopic data and redox potentials obtained from cyclic voltammetry revealed that the electronic property of the Co(-I) center was finely tuned by the rare-earth metalloligand, which was revealed by variation of the ligand systems containing LsN, LmN, and LlAr. Unlike the direct alteration of the electronic property of metal center via an ancillary ligand, such a series of rare-earth metalloligand represents a smooth strategy to tune the electronic property of transition metals.

Tailoring optical and photocatalytic properties of sulfur-doped boron nitride quantum dots via ligand functionalization.

Boron nitride quantum dots (BNQDs) have emerged as promising photocatalysts due to their excellent physicochemical properties. This study investigates strategies to enhance the photocatalytic performance of BNQDs through sulfur-doping (S-BNQDs) and edge-functionalization with ligands (urea, thiourea, p-phenyl-enediamine (PPD)). To analyze the geometry, electronic structure, optical absorption, charge transfer, and photocatalytic parameters of pristine and functionalized S-BNQDs, we performed density functional theory calculations. The results showed that S-doping and ligand functionalization tune the bandgap, band energies, and introduce mid-gap states to facilitate light absorption, charge separation, and optimized energetics for photocatalytic redox reactions. Notably, the PPD ligand induced the most substantial bandgap narrowing and absorption edge red-shift by over 1 electron volt (eV) compared to pristine S-BNQD, significantly expanding light harvesting. Additionally, urea and PPD functionalization increased the charge transfer length by up to 2.5 times, effectively reducing recombination. On the other hand, thiourea functionalization yielded the most favorable electron injection energetics. The energy conversion efficiency followed the order: PPD (15.0%) > thiourea (12.0%) > urea (11.0%) > pristine (10.0%). Moreover, urea functionalization maximized the first-order hyperpolarizability, enhancing light absorption. These findings provide valuable insights into tailoring S-BNQDs through strategic doping and functionalization to develop highly efficient, customized photocatalysts for sustainable applications.

Comparison of Neutralizing Antibody Response Kinetics in Patients with Hand, Foot, and Mouth Disease Caused by Coxsackievirus A16 or Enterovirus A71: A Longitudinal Cohort Study of Chinese Children, 2017-2019.

Hand, foot, and mouth disease (HFMD), which is mainly caused by coxsackievirus A16 (CVA16) or enterovirus A71 (EV-A71), poses a serious threat to children's health. However, the long-term dynamics of the neutralizing Ab (NAb) response and ideal paired-serum sampling time for serological diagnosis of CVA16-infected HFMD patients were unclear. In this study, 336 CVA16 and 253 EV-A71 PCR-positive HFMD inpatients were enrolled and provided 452 and 495 sera, respectively, for NAb detection. Random-intercept modeling with B-spline was conducted to characterize NAb response kinetics. The NAb titer of CVA16 infection patients was estimated to increase from negative (2.1, 95% confidence interval [CI]: 1.4-3.3) on the day of onset to a peak of 304.8 (95% CI: 233.4-398.3) on day 21 and then remained >64 until 26 mo after onset. However, the NAb response level of EV-A71-infected HFMD patients was much higher than that of CVA16-infected HFMD patients throughout. The geometric mean titer was significantly higher in severe EV-A71-infected patients than in mild patients, with a 2.0-fold (95% CI: 1.4-3.2) increase. When a 4-fold rise in titer was used as the criterion for serological diagnosis of CVA16 and EV-A71 infection, acute-phase serum needs to be collected at 0-5 d, and the corresponding convalescent serum should be respectively collected at 17.4 (95% CI: 9.6-27.4) and 24.4 d (95% CI: 15.3-38.3) after onset, respectively. In conclusion, both CVA16 and EV-A71 infection induce a persistent humoral immune response but have different NAb response levels and paired-serum sampling times for serological diagnosis. Clinical severity can affect the anti-EV-A71 NAb response.

Comprehensive geriatric assessment to predict adverse events in elderly patients undergoing posterior lumbar fusion surgery.

PURPOSE: Although comprehensive geriatric assessment (CGA) has been used widely, its impact on adverse events in elderly patients has not been fully examined. The present study aimed to investigate the relationships between subcomponents of CGA and adverse events (AEs) in elderly patients undergoing posterior lumbar fusion surgery. METHODS: A total of 242 eligible elderly patients enrolled. Our CGA included activities of daily living, instrumental activities of daily living, nutritional status, cardiac function, pulmonary function, renal function, frailty, cognition, anxiety, depression, delirium, chronic pain score, comorbidity and polypharmacy. Comprehensive complication index was used to summarize postoperative complications and its severity. Logistic regression was performed to determine the relationships between subcomponents of a CGA and postoperative AEs. RESULTS: Present study found that female were more vulnerable to have AEs. Postoperative major AEs were associated with delirium (odds ratio (OR): 4.302, 95% confidence interval (CI) 1.720-10.761, p = 0.002), nutritional status (OR: 3.030, 95%CI 1.218-7.541, p = 0.017), cognitive impairment (OR: 4.122, 95%CI 1.179-14.407, p = 0.027), Charlson comorbidity index (CCI) (OR: 4.800, 95%CI 1.852-12.440, p = 0.001) and severe dependent (OR: 3.772, 95%CI 1.116-9.841, p = 0.007). Further analysis showed that delirium (OR: 2.824, 95%CI 1.068-7.467, p = 0.036) and CCI (OR: 3.221, 95%CI 1.184-8.766, p = 0.022) were independently related to major AEs. CONCLUSIONS: These results indicate that preoperative screening preoperative delirium, cognitive, nutrition and CCI are essential to prevent postoperative major AEs of the surgical elderly.

Comparison of femoral tunnel position and knee function in anterior cruciate ligament reconstruction: a retrospective cohort study using measuring-fluoroscopy method versus bony marker method.

BACKGROUND: Previous studies have shown that surgical technique errors especially the wrong bone tunnel position are the primary reason for the failure of anterior cruciate ligament (ACL) reconstruction. In this study, we aimed to compare the femoral tunnel position and impact on knee function during the ACL reconstruction using measuring combined with fluoroscopy method and bony marker method for femoral tunnel localization. METHODS: A retrospective cohort study of patients undergoing ACL reconstruction using the bony marker method or measuring combined with fluoroscopy for femoral tunnel localization was conducted between January 2015 and January 2020. A second arthroscopic exploration was performed more than 1 year after surgery. Data regarding patient demographics, the femoral tunnel position, results of the Lysholm score, the International Knee Documentation Committee (IKDC) score, KT-1000 side-to-side difference, pivot shift grade, and Lachman grade of the knee were collected. RESULTS: A total of 119 patients were included in the final cohort. Of these, 42 cases were in the traditional method group, and 77 cases were in the measuring method group. The good tunnel position rate was 26.2% in the traditional method group and 81.8% in the measuring method group (p < 0.001). At the final follow-up, the Lysholm and IKDC scores were significantly greater in the measuring method group than the traditional method group (IKDC: 84.9 ± 8.4 vs. 79.6 ± 6.4, p = 0.0005; Lysholm: 88.8 ± 6.4 vs. 81.6 ± 6.4, p < 0.001). Lachman and pivot shift grades were significantly greater in the measuring method group (p = 0.01, p = 0008). The results of KT-1000 side-to-side differences were significantly better in the measuring method group compared with those in the traditional method group (p < 0.001). CONCLUSIONS: The combination of the measuring method and intraoperative fluoroscopy resulted in a concentrated tunnel position on the femoral side, a high rate of functional success, improved knee stability, and a low risk of tunnel deviation. This approach is particularly suitable for surgeons new to ACL reconstructive surgery.

The association between body mass index and bone mineral density in older adults: a cross-sectional study of community population in Beijing.

BACKGROUND: Older subjects have a higher risk for vertebral compression fracture. Maintaining a higher bone mineral density (BMD) at this age can protect individuals from osteoporosis-related events. Body mass index (BMI) has been found to have a robust association with BMD. However, excessive BMI is detrimental to bone health and may cause systemic disorders. Therefore, the present study aimed to determine the association between BMI and BMD, and identify a reasonable BMI range. METHODS: A total of 961 participants were recruited from community-dwelling residents between August 2021 and May 2022. A weighted multivariate linear regression model was applied to identify the relationship between BMI and BMD. Meanwhile, subgroup stratified analysis by BMI quartile and gender was also performed. A non-linear relationship and threshold value were determined based on the smooth curve fittings and threshold effects analysis model. RESULTS: A robust relationship was found between BMI and BMD, which remained significant in subgroups stratified by gender and BMI quartile. The BMI inflection point values in lumbar BMD and femoral neck BMD were 25.2 kg/m2 and 27.3 kg/m2, respectively. For individuals with BMI < 25.2 kg/m2, an increase in BMI was related to an increase in lumbar BMD. For BMI > 25.2 kg/m2, an increase in BMI was associated with a decrease in lumbar BMD. For subjects with BMI < 27.3 kg/m2, the femoral neck BMD rose by 0.008 kg/m2 for each unit rise in BMI. However, when BMI exceeded 27.3 kg/m2, the femoral neck BMD increased only by 0.005 kg/m2. Fracture risk assessment based on the spinal deformity index (SDI) failed to determine the optimal BMI range. CONCLUSIONS: This study found an inflection point between BMI and lumbar/ femoral neck BMD in older community-dwelling subjects. An appropriate BMI but not an excessive BMI may allow older adults to have a better BMD.

Predictors of achieving minimal clinically important difference in functional status for elderly patients with degenerative lumbar spinal stenosis undergoing lumbar decompression and fusion surgery.

OBJECTIVE: To identify the predictors for the achievement of minimal clinically important difference (MCID) in functional status among elderly patients with degenerative lumbar spinal stenosis (DLSS) undergoing lumbar decompression and fusion surgery. METHODS: Patients who underwent lumbar surgery for DLSS and had a minimum of 1-year follow-up were included. The MCID achievement threshold for the Oswestry Disability Index (ODI) was set at 12.8. General patient information and the morphology of lumbar paraspinal muscles were evaluated using comparative analysis to identify influencing factors. Multiple regression models were employed to identify predictors associated with MCID achievement. A receiver operating characteristic (ROC) curve analysis was conducted to determine the optimal cut-off values for predicting functional recovery. RESULTS: A total of 126 patients (46 males, 80 females; mean age 73.0 ± 5.9 years) were included. The overall rate of MCID achievement was 74.6%. Patients who achieved MCID had significantly higher psoas major muscle attenuation (43.55 vs. 39.23, p < 0.001) and preoperative ODI (51.5 vs. 41.6, p < 0.001). Logistic regression showed that elevated psoas major muscle attenuation (p = 0.001) and high preoperative ODI scores (p = 0.001) were independent MCID predictors. The optimal cut-off values for predicting MCID achievement were found to be 40.46 Hounsfield Units for psoas major muscle attenuation and 48.14% for preoperative ODI. CONCLUSION: Preoperative psoas major muscle attenuation and preoperative ODI were reliable predictors of achieving MCID in geriatric patients undergoing lumbar decompression and fusion surgery. These findings offer valuable insights for predicting surgical outcomes and guiding clinical decision-making in elderly patients.

Effect of Bridging Manner on the Transport Behaviors of Dimethyldihydropyrene/Cyclophanediene Molecular Devices.

A molecule-electrode interface with different coupling strengths is one of the greatest challenges in fabricating reliable molecular switches. In this paper, the effects of bridging manner on the transport behaviors of a dimethyldihydropyrene/cyclophanediene (DHP/CPD) molecule connected to two graphene nanoribbon (GNR) electrodes have been investigated by using the non-equilibrium Green's function combined with density functional theory. The results show that both current values and ON/OFF ratios can be modulated to more than three orders of magnitude by changing bridging manner. Bias-dependent transmission spectra and molecule-projected self-consistent Hamiltonians are used to illustrate the conductance and switching feature. Furthermore, we demonstrate that the bridging manner modulates the electron transport by changing the energy level alignment between the molecule and the GNR electrodes. This work highlights the ability to achieve distinct conductance and switching performance in single-molecular junctions by varying bridging manners between DHP/CPD molecules and GNR electrodes, thus offering practical insights for designing molecular switches.

Emergence and Causality in Complex Systems: A Survey of Causal Emergence and Related Quantitative Studies.

Emergence and causality are two fundamental concepts for understanding complex systems. They are interconnected. On one hand, emergence refers to the phenomenon where macroscopic properties cannot be solely attributed to the cause of individual properties. On the other hand, causality can exhibit emergence, meaning that new causal laws may arise as we increase the level of abstraction. Causal emergence (CE) theory aims to bridge these two concepts and even employs measures of causality to quantify emergence. This paper provides a comprehensive review of recent advancements in quantitative theories and applications of CE. It focuses on two primary challenges: quantifying CE and identifying it from data. The latter task requires the integration of machine learning and neural network techniques, establishing a significant link between causal emergence and machine learning. We highlight two problem categories: CE with machine learning and CE for machine learning, both of which emphasize the crucial role of effective information (EI) as a measure of causal emergence. The final section of this review explores potential applications and provides insights into future perspectives.

Precisely Constructing Molecular Junctions in Hydrogen-Bonded Organic Frameworks for Efficient Artificial Photosynthetic CO2 Reduction.

The development of artificial photocatalysts to convert CO2 into renewable fuels and H2O into O2 is a complex and crucial task in the field of photosynthesis research. The current challenge is to enhance photogenerated charge separation, as well as to increase the oxidation capability of materials. Herein, a molecular junction-type porphyrin-based crystalline photocatalyst (Ni-TCPP-TPyP) was successfully self-assembled by incorporating a nickel porphyrin complex as a reduction site and pyridyl porphyrin as an oxidation site via hydrogen bonding and π-π stacking interactions. The resulting material has a highly crystalline structure, and the formation of inherent molecular junctions can accelerate photogenerated charge separation and transport. Thus, Ni-TCPP-TPyP achieved an excellent CO production rate of 309.3 µmol g-1 h-1 (selectivity, ~100%) without the use of any sacrificial agents, which is more than ten times greater than that of single-component photocatalyst (Ni-TCPP) and greater than that of the most organic photocatalysts. The structure-function relationship was investigated by femtosecond transient absorption spectroscopy and density functional theory calculations. Our work provides new insight for designing efficient artificial photocatalysts, paving the way for the development of clean and renewable fuels through the conversion of CO2 using solar energy.

Cascade Reaction in Organic Hole Transport Layer Enables Efficient Perovskite Solar Cells.

The doped organic hole transport layer (HTL) is crucial for achieving high-efficiency perovskite solar cells (PSCs). However, the traditional doping strategy undergoes a time-consuming and environment-dependent oxidation process, which hinders the technology upgrades and commercialization of PSCs. Here, we reported a new strategy by introducing a cascade reaction in traditional doped Spiro-OMeTAD, which can simultaneously achieve rapid oxidation and overcome the erosion of perovskite by 4-tert-butylpyridine (tBP) in organic HTL. The ideal dopant iodobenzene diacetate was utilized as the initiator that can react with Spiro to generate Spiro⋅+ radicals quickly and efficiently without the participation of ambient air, with the byproduct of iodobenzene (DB). Then, the DB can coordinate with tBP through a halogen bond to form a tBP-DB complex, minimizing the sustained erosion from tBP to perovskite. Based on the above cascade reaction, the resulting Spiro-based PSCs have a champion PCE of 25.76 % (certificated of 25.38 %). This new oxidation process of HTL is less environment-dependent and produces PSCs with higher reproducibility. Moreover, the PTAA-based PSCs obtain a PCE of 23.76 %, demonstrating the excellent applicability of this doping strategy on organic HTL.

Revealing and Inhibiting the Facet-related Ion Migration for Efficient and Stable Perovskite Solar Cells.

Ion migration is a major issue hindering the long-term stability of perovskite solar cells (PSCs). As an intrinsic characteristic of metal halide perovskite materials, ion migration is closely related to the atomic arrangement and coordination, which are the basic characteristic differences among various facets. Herein, we report the facet-related ion migration, and then achieve the inhibition of ion migration in perovskite through finely modulating the facet orientation. We show that the (100) facet is substantially more vulnerable to cationic migration than the (111) facet. The main reason for this difference in migration is that the cationic migration route in the (111) facet deviates from that in the (100) facet, which increases the active migration energy and weakens the contribution from the electric field during operation. We prepare a (111)-dominated perovskite film by incorporating a facile and green addition of water (H2O) into the antisolvent, further achieving a power conversion efficiency (PCE) of 26.0% (25.4% certification) on regular planar PSCs and 25.8% on inverted PSCs. Moreover, the unencapsulated PSCs can maintain 95% of their initial PCE after 3500-hours operation under simulated AM1.5 illumination at the maximum power point.