RESUMEN
In superconducting materials a dynamical rearrangement of the vortex lattice occurs by forcing vortices at high velocities, until the system can become unstable. This phenomenon is known as vortex lattice instability, in which a sudden transition drives the superconducting system abruptly to the normal state. We present an experimental study on submicron bridges of NbN and NbTiN ultra-thin films with a thickness of few nanometers. The nanoscale effect on vortex lattice instability is investigated not only by the ultra-thin thickness in wide bridges, but also by changing the direction of the external magnetic field applied parallel and perpendicular to the c-axis epitaxial films. Indeed, measurements are performed for both orientations and show the vortex lattice instability, regardless of the superconducting material. Critical currents I c as well as instability currents I* have been compared. However, only in the parallel configuration an unusual 'flying birds' feature appears in the magnetic field dependence of current switching, as a consequence of the ratio I*/I c that is approaching 1. This amazing tendency becomes relevant for practical applications involving nanostructures, since by scaling down sample thickness and rotating the external field towards the in-plane orientation, the ultra-thin film geometry can mimic the bridge narrowing down to the nanoscale.
RESUMEN
Discovery of iron-based superconductors paved the way to a competitor of high-temperature superconductors, easier to produce, better performing in high fields, and promising to be less expensive. Critical parameters are investigated by resistivity measurements as a function of temperature, field, and angle R(T,H,θ). This work presents a deep analysis of H-θ phase diagram of PLD-processed Fe(Se,Te) superconducting films, thus revealing material and pinning anisotropy at once. By selecting different thresholds along the R(T,H,θ) curves, all possible regimes emerge. Surprisingly, anisotropy arises moving from the upper critical field toward the irreversibility line: gradually a non-monotonous transition from 3D to 2D, and backward to 3D occurs. Although Fe(Se,Te) appears as a 3D superconductor, its anisotropic pinning landscape shows up similarities with an intrinsic layered superconductor and Fe(Se,Te) definitively mimics YBCO. We propose a general method to disentangle, in any other superconductor, material dimensionality and pinning anisotropy that are key constraints for applications.
RESUMEN
Point-contact spectroscopy was performed on bulk samples of electron-doped high temperature superconductor Nd2-xCexCuO4-δ. The samples were characterized using X-ray diffraction and scanning electron microscopy equipped with a wavelength-dispersive spectrometer and an electron backscatter diffraction detector. Samples with Ce content x = 0.15 showed the absence of spurious phases and randomly oriented grains, most of which had dimensions of approximately 220 µm2. The low-bias spectra in the tunneling regime, i.e., high-transparency interface, exhibited a gap feature at about ±5 meV and no zero-bias conductance, despite the random oriented grains investigated within our bulk samples, consistent with most of the literature data on oriented samples. High-bias conductance was also measured in order to obtain information on the properties of the barrier. A V-shape was observed in some cases, instead of the parabolic behavior expected for tunnel junctions.
RESUMEN
We report theoretical and experimental results on the transition metal pnictide WP. The theoretical outcomes based on tight-binding calculations and density functional theory indicate that WP is a three-dimensional superconductor with an anisotropic electronic structure and nonsymmorphic symmetries. On the other hand, magnetoresistance experimental data and the analysis of superconducting fluctuations of the conductivity in external magnetic field indicate a weakly anisotropic three-dimensional superconducting phase.
RESUMEN
The magnetization M of an Fe(Se, Te) single crystal has been measured as a function of temperature T and dc magnetic field H. The sample properties have been analyzed in the case of a magnetic field parallel to its largest face H||ab. From the M(T) measurement, the Tc of the sample and a magnetic background have been revealed. The superconducting hysteresis loops M(H) were between 2.5 K and 15 K showing a tilt due to the presence of a magnetic signal measured at T > Tc. From the M(H) curves, the critical current density Jc(H) has been extracted at different temperatures showing the presence of a second magnetization peak phenomenon. By extracting and fitting the Jc(T) curves at different fields, a pinning regime crossover has been identified and shown to be responsible for the origin of the second magnetization peak phenomenon. Then, the different kinds of pinning centers of the sample were investigated by means of Dew-Hughes analysis, showing that the pinning mechanism in the sample can be described in the framework of the collective pinning theory. Finally, the values of the pinning force density have been calculated at different temperatures and compared with the literature in order to understand if the sample is promising for high-current and high-power applications.
RESUMEN
We analyze the magnetic behavior of a CaKFe4As4 polycrystalline sample fabricated by a mechanochemically assisted synthesis route. By means of DC magnetization (M) measurements as a function of the temperature (T) and DC magnetic field (H) we study its critical parameters and pinning features. The critical temperature Tc has been evaluated by M(T) curves performed in Zero Field Cooling-Field Cooling conditions. These curves show the presence of a little magnetic background for temperatures above Tc, as also confirmed by the hysteresis loops M(H). Starting from the M(H) curves, the critical current density Jc of the sample has been calculated as a function of the field at different temperatures in the framework of the Bean critical state model. The Jc(H) values are in line with the ones reported in the literature for this typology of samples. By analyzing the temperature dependence of the critical current density Jc(T) at different magnetic fields, it has been found that the sample is characterized by a strong type pinning regime. This sample peculiarity can open perspectives for future improvement in the fabrication of this material.
RESUMEN
The role of a layered structure in superconducting pinning properties is still at a debate. The effects of the vortex shape, which can assume for example a staircase form, could influence the interplay with extrinsic pinning coming from the specific defects of the material, thus inducing an effective magnetic field dependence. To enlighten this role, we analysed the angular dependence of flux pinning energy U(H,θ) as a function of magnetic field in FeSe0.5Te0.5 thin film by considering the field components along the ab-plane of the crystal structure and the c-axis direction. U(H,θ) has been evaluated from magneto-resistivity measurements acquired at different orientations between the applied field up to 16 T and FeSe0.5Te0.5 thin films grown on a CaF2 substrate. We observed that the U(H,θ) shows an anisotropic trend as a function of both the intensity and the direction of the applied field. Such a behaviour can be correlated to the presence of extended defects elongated in the ab-planes, thus mimicking a layered superconductor, as we observed in the microstructure of the compound. The comparison of FeSe0.5Te0.5 with other superconducting materials provides a more general understanding on the flux pinning energy in layered superconductors.
RESUMEN
The process of developing superconducting materials for large scale applications is mainly oriented to optimize flux pinning and the current carrying capability. A powerful approach to investigate pinning properties is to combine high resolution imaging with transport measurements as a function of the magnetic field orientation, supported by a pinning modelling. We carry out Transmission Electron Microscopy, Electron Energy Loss Spectroscopy and critical current measurements in fields up to 16 T varying the angle between the field and c-axis of Fe(Se,Te) epitaxial thin films deposited on CaF2 substrates. We find evidence of nanoscale domains with different Te:Se stoichiometry and/or rotated and tilted axes, as well as of lattice distortions and two-dimensional defects at the grain boundaries. These elongated domains are tens of nm in size along the in-plane axes. We establish a correlation between these observed microstructural features and the pinning properties, specifically strongly enhanced pinning for the magnetic field oriented in-plane and pinning emerging at higher fields for out-of-plane direction. These features can be accounted for within a model where pinning centers are local variations of the critical temperature and local variations of the mean free path, respectively. The identification of all these growth induced defects acting as effective pinning centers may provide useful information for the optimization of Fe(Se,Te) coated conductors.
RESUMEN
We performed a detailed investigation of the superconducting properties of polycrystalline Pr1-xCexPt4Ge12 pellets. We report the effect of Ce substitution, for x = 0.07, on magnetic field phase diagram H-T. We demonstrate that the upper critical field is well described by the Ginzburg-Landau model and that the irreversibility field line has a scaling behaviour similar to cuprates. We also show that for magnetic fields lower than 0.4 T, the activation energy follows a power law of the type ?-1/2, suggesting a collective pinning regime with a quasi-2D character for the Ce-doped compound with x = 0.07. Furthermore, by means of a point contact Andreev reflection spectroscopy setup, we formed metal/superconductor nano-junctions as small as tens of nanometers on the PrPt4Ge12 parent compound (x = 0). Experimental results showed a wide variety of conductance features appearing in the dI/dV vs. V spectra, all explained in terms of a modified Blonder-Tinkham-Klapwijk model considering a superconducting order parameter with nodal directions as well as sign change in the momentum space for the sample with x = 0. The numerical simulations of the conductance spectra also demonstrate that s-wave pairing and anisotropic s-waves are unsuitable for reproducing experimental data obtained at low temperature on the un-doped compound. Interestingly, we show that the polycrystalline nature of the superconducting PrPt4Ge12 sample can favour the formation of an inter-grain Josephson junction in series with the point contact junction in this kind of experiments.
RESUMEN
Anisotropy effects on flux pinning and flux flow are strongly effective in cuprate as well as iron-based superconductors due to their intrinsically layered crystallographic structure. However Fe(Se,Te) thin films grown on CaF2 substrate result less anisotropic with respect to all the other iron based superconductors. We present the first study on the angular dependence of the flux flow instability, which occurs in the flux flow regime as a current driven transition to the normal state at the instability point (I*, V*) in the current-voltage characteristics. The voltage jumps are systematically investigated as a function of the temperature, the external magnetic field, and the angle between the field and the Fe(Se,Te) film. The scaling procedure based on the anisotropic Ginzburg-Landau approach is successfully applied to the observed angular dependence of the critical voltage V*. Anyway, we find out that Fe(Se,Te) represents the case study of a layered material characterized by a weak anisotropy of its static superconducting properties, but with an increased anisotropy in its vortex dynamics due to the predominant perpendicular component of the external applied magnetic field. Indeed, I* shows less sensitivity to angle variations, thus being promising for high field applications.