RESUMEN
Lithium-oxygen batteries are among the most attractive alternatives for future electrified transportation. However, their practical application is hindered by many obstacles. Due to the insulating nature of Li2 O2 product and the slow kinetics of reactions, attaining sustainable low charge overpotentials at high rates becomes a challenge resulting in the battery's early failure and low round trip efficiency. Herein, outstanding characteristics are discovered of a conductive metal organic framework (c-MOF) that promotes the growth of nanocrystalline Li2 O2 with amorphous regions. This provides a platform for the continuous growth of Li2 O2 units away from framework, enabling a fast discharge at high current rates. Moreover, the Li2 O2 structure works in synergy with the redox mediator (RM). The conductivity of the amorphous regions of the Li2 O2 allows the RM to act directly on the Li2 O2 surface instead of catalyst edges and then transport through the electrolyte to the Li2 O2 surface. This direct charge transfer enables a small charge potential of <3.7 V under high current densities (1-2 A g-1 ) sustained for a long cycle life (100-300 cycles) for large capacities (1000-2000 mAh g-1 ). These results open a new direction for utilizing c-MOFs towards advanced energy storage systems.
RESUMEN
Lithium-oxygen (Li-O2 ) batteries possess the highest theoretical energy density (3500 Wh kg-1 ), which makes them attractive candidates for modern electronics and transportation applications. In this work, an inexpensive, flexible, and wearable Li-O2 battery based on the bifunctional redox mediator of InBr3 , MoS2 cathode catalyst, and Fomblin-based oxygen permeable membrane that enable long-cycle-life operation of the battery in pure oxygen, dry air, and ambient air is designed, fabricated, and tested. The battery operates in ambient air with an open system air-breathing architecture and exhibits excellent cycling up to 240 at the high current density of 1 A g-1 with a relative humidity of 75%. The electrochemical performance of the battery including deep-discharge capacity, and rate capability remains almost identical after 1000 cycle in a bending fatigue test. This finding opens a new direction for utilizing high performance Li-O2 batteries for applications in the field of flexible and wearable electronics.
Asunto(s)
Suministros de Energía Eléctrica , Litio , Catálisis , Electrodos , OxígenoRESUMEN
The rechargeable lithium-oxygen (Li-O2) battery has the highest theoretical specific energy density of any rechargeable batteries and could transform energy storage systems if a practical device could be attained. However, among numerous challenges, which are all interconnected, are polarization due to sluggish kinetics, low cycle life, small capacity, and slow rates. In this study, we report on use of KMnO4 to generate a colloidal electrolyte made up of MnO2 nanoparticles. The resulting electrolyte provides a redox mediator for reducing the charge potential and lithium anode protection to increase cycle life. This electrolyte in combination with a stable binary transition metal dichalcogenide alloy, Nb0.5Ta0.5S2, as the cathode enables the operation of a Li-O2 battery at a current density of 1 mA·cm-2 and specific capacity ranging from 1000 to 10â¯000 mA·h·g-1 (corresponding to 0.1-1 mA·h·cm-2) in a dry air environment with a cycle life of up to 150. This colloidal electrolyte provides a robust approach for advancing Li-air batteries.
RESUMEN
High-entropy alloys combine multiple principal elements at a near equal fraction to form vast compositional spaces to achieve outstanding functionalities that are absent in alloys with one or two principal elements. Here, the prediction, synthesis, and multiscale characterization of 2D high-entropy transition metal dichalcogenide (TMDC) alloys with four/five transition metals is reported. Of these, the electrochemical performance of a five-component alloy with the highest configurational entropy, (MoWVNbTa)S2 , is investigated for CO2 conversion to CO, revealing an excellent current density of 0.51 A cm-2 and a turnover frequency of 58.3 s-1 at ≈ -0.8 V versus reversible hydrogen electrode. First-principles calculations show that the superior CO2 electroreduction is due to a multi-site catalysis wherein the atomic-scale disorder optimizes the rate-limiting step of CO desorption by facilitating isolated transition metal edge sites with weak CO binding. 2D high-entropy TMDC alloys provide a materials platform to design superior catalysts for many electrochemical systems.
RESUMEN
Metal-organic frameworks (MOFs) are promising materials for electrocatalysis; however, lack of electrical conductivity in the majority of existing MOFs limits their effective utilization in the field. Herein, an excellent catalytic activity of a 2D copper (Cu)-based conductive MOF, copper tetrahydroxyquinone (CuTHQ), is reported for aqueous CO2 reduction reaction (CO2 RR) at low overpotentials. It is revealed that CuTHQ nanoflakes (NFs) with an average lateral size of 140 nm exhibit a negligible overpotential of 16 mV for the activation of this reaction, a high current density of ≈173 mA cm-2 at -0.45 V versus RHE, an average Faradaic efficiency (F.E.) of ≈91% toward CO production, and a remarkable turnover frequency as high as ≈20.82 s-1 . In the low overpotential range, the obtained CO formation current density is more than 35 and 25 times higher compared to state-of-the-art MOF and MOF-derived catalysts, respectively. The operando Cu K-edge X-ray absorption near edge spectroscopy and density functional theory calculations reveal the existence of reduced Cu (Cu+ ) during CO2 RR which reversibly returns to Cu2+ after the reaction. The outstanding CO2 catalytic functionality of conductive MOFs (c-MOFs) can open a way toward high-energy-density electrochemical systems.
RESUMEN
Redox mediators (RMs) are solution-based additives that have been extensively used to reduce the charge potential and increase the energy efficiency of Li-oxygen (Li-O2) batteries. However, in the presence of RMs, achieving a long cycle-life operation of Li-O2 batteries at a high current rate is still a major challenge. In this study, we discover a novel synergy among InX3 (X = I and Br) bifunctional RMs, molybdenum disulfide (MoS2) nanoflakes as the air electrode, dimethyl sulfoxide/ionic liquid hybrid electrolyte, and LiTFSI as a salt to achieve long cycle-life operations of Li-O2 batteries in a dry air environment at high charge-discharge rates. Our results indicate that batteries with InI3 operate up to 450 cycles with a current density of 0.5 A g-1 and 217 cycles with a current density of 1 A g-1 at a fixed capacity of 1 A h g-1. Batteries with InBr3 operate up to 600 cycles with a current density of 1 A g-1. These batteries can also operate at a higher charge rate of 2 A g-1 up to 200 cycles (for InBr3) and 160 cycles (for InI3). Our experimental and computational results reveal that while X3- is the source of the redox mediator, LiX at the MoS2 cathode, In3+ reacts on the lithium anode side to form a protective layer on the surface, thus acting as an effective bifunctional RM in a dry air environment. This evidence for a simultaneous improvement in the current rates and cycle life of a battery in a dry air atmosphere opens a new direction for research for advanced energy storage systems.
RESUMEN
Fiber-reinforced polyester composites have received significant attention in a variety of applications due to their considerable potential due to such characteristics as high strength, stiffness, and modulus. However, one of the most important concerns about polymeric composites is their sensitivity to moisture attack. This work has been conducted to investigate the effects of nanoclay addition on reinforcing glass/polyester composites against water absorption and the resultant deterioration of flexural strength. Therefore, chopped strand mat and woven fiberglass polyester specimens were fabricated by using the hand lay-up technique with varying weight percentages of Cloisite 20A nanoclays (0, 1.5, and 3 wt%) and immersion in water for a time duration of 21 days. The specimens were weighed for the water absorption test. The results showed a remarkable drop in water absorption of the composite samples with the increase of nanoclay content. Moreover, although all the pure and nanocomposite specimens underwent degradation in flexural strength due to the water absorption, the strength was found to significantly increase with increasing the percentage of nanoclay at all immersion periods. The experimental results were confirmed by scanning electron microscopy (SEM). SEM images indicated that the presence of nanoclay protected the fiber/matrix interfaces.
Asunto(s)
Arcilla/química , Vidrio/química , Nanoestructuras/química , Poliésteres/química , Resinas Compuestas , Elasticidad , Resistencia Flexional , Ensayo de Materiales , Microscopía Electrónica de Rastreo , Polímeros/química , Estrés Mecánico , Propiedades de Superficie , Temperatura , Agua/químicaRESUMEN
Transition metal dichalcogenide (TMDCs) alloys could have a wide range of physical and chemical properties, ranging from charge density waves to superconductivity and electrochemical activities. While many exciting behaviors of unary TMDCs have been demonstrated, the vast compositional space of TMDC alloys has remained largely unexplored due to the lack of understanding regarding their stability when accommodating different cations or chalcogens in a single-phase. Here, a theory-guided synthesis approach is reported to achieve unexplored quasi-binary TMDC alloys through computationally predicted stability maps. Equilibrium temperature-composition phase diagrams using first-principles calculations are generated to identify the stability of 25 quasi-binary TMDC alloys, including some involving non-isovalent cations and are verified experimentally through the synthesis of a subset of 12 predicted alloys using a scalable chemical vapor transport method. It is demonstrated that the synthesized alloys can be exfoliated into 2D structures, and some of them exhibit: i) outstanding thermal stability tested up to 1230 K, ii) exceptionally high electrochemical activity for the CO2 reduction reaction in a kinetically limited regime with near zero overpotential for CO formation, iii) excellent energy efficiency in a high rate Li-air battery, and iv) high break-down current density for interconnect applications. This framework can be extended to accelerate the discovery of other TMDC alloys for various applications.
RESUMEN
Lithium-CO2 batteries are attractive energy-storage systems for fulfilling the demand of future large-scale applications such as electric vehicles due to their high specific energy density. However, a major challenge with Li-CO2 batteries is to attain reversible formation and decomposition of the Li2 CO3 and carbon discharge products. A fully reversible Li-CO2 battery is developed with overall carbon neutrality using MoS2 nanoflakes as a cathode catalyst combined with an ionic liquid/dimethyl sulfoxide electrolyte. This combination of materials produces a multicomponent composite (Li2 CO3 /C) product. The battery shows a superior long cycle life of 500 for a fixed 500 mAh g-1 capacity per cycle, far exceeding the best cycling stability reported in Li-CO2 batteries. The long cycle life demonstrates that chemical transformations, making and breaking covalent CO bonds can be used in energy-storage systems. Theoretical calculations are used to deduce a mechanism for the reversible discharge/charge processes and explain how the carbon interface with Li2 CO3 provides the electronic conduction needed for the oxidation of Li2 CO3 and carbon to generate the CO2 on charge. This achievement paves the way for the use of CO2 in advanced energy-storage systems.