RESUMEN
Various cranioplasty techniques exist for the reconstruction of cranial bone defects. Patient-specific implants can be produced in-house using a recently developed 3D printer-assisted cranioplasty technique. However, the resulting cosmetic outcomes from the patient's perspective are underreported. With our case series, we aim to present the clinical outcome, morbidity rate, patient-reported cosmetic results, and cost-effectiveness of patient-specific3D printer-assisted cranioplasty technique. This is a consecutive retrospective case series of adult patients undergoing cranioplasty using the patient-specific 3D printer-assisted technique. As primary endpoint, the functional outcome based on modified Rankin scale (mRS) at discharge and follow-up was assessed. A prospective telephone survey was conducted to collect and provide patient-reported outcomes. Thirty-one patients underwent patient-specific 3D printer-assisted cranioplasty, mostly to reconstruct frontotemporoparietal (61.3%) and frontotemporal defects with orbital involvement (19.4%). Good functional outcome (mRS ≤ 2) at discharge and during the last follow-up was achieved in 54.8% (n = 17) and 58.1% (n = 18) patients. Overall, the rate of clinically relevant surgery-related complications was 35.5% (n = 11). Postoperative epidural hematoma/collection (16.1%) and infections (12.9%) were the most frequent complications. Permanent morbidity occurred in one patient (3.2%) with postoperative acute ipsilateral vision loss after frontotemporal cranioplasty with orbital involvement. No surgery-related mortality occurred. The mean patient-reported cosmetic satisfaction score was 7.8 ± 1.5, with 80% of patients reporting satisfying or very satisfying cosmetic results. No significant differences were seen between the different defect localization regarding the cosmetic outcome. The mean manufacturing costs of a patient-specific 3D printer-assisted implant ranged from 748 to 1129 USD. Based on our case series, patient-specific 3D printer-assisted cranioplasty is cost-effective and leads to satisfying cosmetic results, especially in large defects and/or defects with complex geometry.
Asunto(s)
Procedimientos de Cirugía Plástica , Adulto , Humanos , Estudios Retrospectivos , Estudios Prospectivos , Cráneo/cirugía , Prótesis e Implantes , Medición de Resultados Informados por el PacienteRESUMEN
OBJECTIVES: Supine lumbar spine examinations underestimate body weight effects on neuroforaminal size. Therefore, our purpose was to evaluate size changes of the lumbar neuroforamina using supine and upright 3D tomography and to initially assess image quality compared with computed tomography (CT). METHODS: The lumbar spines were prospectively scanned in 48 patients in upright (3D tomographic twin robotic X-ray) and supine (30 with 3D tomography, 18 with CT) position. Cross-sectional area (CSA), cranio-caudal (CC), and ventro-dorsal (VD) diameters of foramina were measured by two readers and additionally graded in relation to the intervertebral disc height. Visibility of bone/soft tissue structures and image quality were assessed independently on a 5-point Likert scale for the 18 patients scanned with both modalities. Descriptive statistics, Wilcoxon's signed-rank test (p < 0.05), and interreader reliability were calculated. RESULTS: Neuroforaminal size significantly decreased at all levels for both readers from the supine (normal intervertebral disc height; CSA 1.25 ± 0.32 cm2; CC 1.84 ± 0.24 cm2; VD 0.88 ± 0.16 cm2) to upright position (CSA 1.12 ± 0.34 cm2; CC 1.78 ± 0.24 cm2; VD 0.83 ± 0.16 cm2; each p < 0.001). Decrease in intervertebral disc height correlated with decrease in foraminal size (supine: CSA 0.88 ± 0.34 cm2; CC 1.39 ± 0.33 cm2; VD 0.87 ± 0.26 cm2; upright: CSA 0.83 ± 0.37 cm2, p = 0.010; CC 1.32 ± 0.33 cm2, p = 0.015; VD 0.80 ± 0.21 cm2, p = 0.021). Interreader reliability for area was fair to excellent (0.51-0.89) with a wide range for cranio-caudal (0.32-0.74) and ventro-dorsal (0.03-0.70) distances. Image quality was superior for CT compared with that for 3D tomography (p < 0.001; κ, CT = 0.66-0.92/3D tomography = 0.51-1.00). CONCLUSIONS: The size of the lumbar foramina is smaller in the upright weight-bearing position compared with that in the supine position. Image quality, especially nerve root delineation, is inferior using 3D tomography compared to CT. KEY POINTS: ⢠Weight-bearing examination demonstrates a decrease of the neuroforaminal size. ⢠Patients with higher decrease in intervertebral disc showed a narrower foraminal size. ⢠Image quality is superior with CT compared to 3D tomographic twin robotic X-ray at the lumbar spine.
Asunto(s)
Disco Intervertebral , Procedimientos Quirúrgicos Robotizados , Humanos , Vértebras Lumbares/diagnóstico por imagen , Región Lumbosacra , Imagen por Resonancia Magnética , Reproducibilidad de los Resultados , Posición Supina , Rayos XRESUMEN
PURPOSE: The current study investigates whether patella height and tilt or leg alignment influence the intensity values as well as the distribution pattern of single photon emission computerized tomography/computerized tomography (SPECT/CT) tracer uptake in the patellofemoral joint. METHODS: 99mTc-HDP-SPECT/CT and radiographs of consecutive 84 knees were prospectively obtained. Lateral radiographs were analyzed in terms of patellar height, Insall-Salvati index and modified Insall-Salvati index. Skyline views were analyzed for Laurin's lateral patellofemoral angle. On long-leg radiographs, the mechanical leg alignment was classified as varus, valgus or neutral. SPECT/CT was analyzed for each anatomical region using a previously validated SPECT/CT localization and grading algorithm. Mean, standard deviation, minimum and maximum of grading for each area of the localization scheme were recorded. Nonparametric Spearman's correlations were used to correlate patellar height, lateral patellar angle and leg alignment with the tracer uptake intensity. Chi-square statistics were used for categorical data (p < 0.05). RESULTS: A patella baja correlated significantly with higher SPECT/CT tracer uptake in all patellar and lateral femoral regions (p < 0.001). A higher lateral patellar tilt correlated significantly with higher tracer uptake in the superior lateral femoral parts and the tibial tubercle. In mechanically varus aligned knees, there was significantly higher SPECT/CT tracer uptake on the medial and in valgus knees on the lateral part of the patellofemoral joint (p < 0.05). CONCLUSIONS: As the intensity and distribution of the SPECT/CT significantly correlated with patella baja and patellar tilt, SPECT/CT might be considered as imaging modality for evaluating patients with patellofemoral disorders and for follow-up of patients after patellofemoral realignment procedures. LEVEL OF EVIDENCE: Diagnostic study, Level II.
Asunto(s)
Artralgia/diagnóstico , Rótula/diagnóstico por imagen , Articulación Patelofemoral/diagnóstico por imagen , Tomografía Computarizada de Emisión de Fotón Único , Adulto , Desviación Ósea/diagnóstico , Difosfonatos , Femenino , Fémur/diagnóstico por imagen , Humanos , Masculino , Persona de Mediana Edad , Compuestos de Organotecnecio , Rótula/anomalías , Articulación Patelofemoral/anomalías , Radiografía , Radiofármacos , Tibia/diagnóstico por imagenRESUMEN
BACKGROUND: To develop a novel 3D-printer-assisted method to fabricate patient-specific implants for cranioplasty and to demonstrate its feasibility and its use in 16 consecutive cases. METHODS: We report on 16 consecutive patients who have undergone cranioplasty surgery for an extensive skull defect after decompressive surgery and in which the bone flap was not available. We present the workflow for the implant production using a 3D-printer-assisted molding technique. Preoperative, intraoperative, and postoperative data were analyzed/evaluated. RESULTS: Eleven out of our 16 patients (68.7%) presented with extensive hemispheric bone defects. Indication for initial craniotomy were traumatic brain injury (4; 25%), acute subdural hematoma (4; 25%), ischemic stroke (3; 18.8%), tumor (3; 18.8%), and ruptured aneurysm (2; 12.5%). Median (range) operation time was 121 (89-206) minutes. Median (range) intraoperative blood loss was 300 (100-3300) mL. The mean (range) follow-up period is 6 (0-21) months. Complications occurred in 7 out of our 16 patients (43.8%), in 6 (37.5%) of which a reoperation was required to evacuate an extra-axial hematoma (3; 50%), for shunting of an epidural fluid collection (1; 16.7%), or for skin flap necrosis (1; 16.7%). One patient (16.7%) developed a chronic asymptomatic subdural fluid collection that was stable over the follow-up period. CONCLUSIONS: Our workflow to intraoperatively produce patient-specific implants in a timely manner to cover cranial defects proved to be feasible. The results are cosmetically appealing, and postoperative CT scans show well-fitting implants. As implantable printable substrates are already available, we aim to advance and certify 3D-printed patient-specific implants in the near future.
Asunto(s)
Craniectomía Descompresiva , Procedimientos de Cirugía Plástica/métodos , Impresión Tridimensional , Prótesis e Implantes , Cráneo/cirugía , Adulto , Anciano , Análisis Costo-Beneficio , Femenino , Estudios de Seguimiento , Hematoma/etiología , Hematoma/cirugía , Humanos , Imagenología Tridimensional , Masculino , Persona de Mediana Edad , Polimetil Metacrilato , Complicaciones Posoperatorias/etiología , Complicaciones Posoperatorias/cirugía , Impresión Tridimensional/economía , Prótesis e Implantes/economía , Diseño de Prótesis , Colgajos Quirúrgicos , Tomografía Computarizada por Rayos X , Adulto JovenRESUMEN
This study investigates if the mechanical/anatomical alignment influences the intensity values as well as the distribution pattern of SPECT/CT tracer uptake. Eighty-five knees (mean age 48 ± 16) undergoing 99mTc-HDP-SPECT/CT due to pain were prospectively included. SPECT/CTs were analyzed using a previously validated localization method. The maximum intensities in each femoral, tibial, and patellar joint compartment (medial, lateral, central, superior, and inferior) were noted using a color-coded grading scale (0-10). The Kellgren-Lawrence osteoarthritis score (KL) was assessed on standardized radiographs. Long leg radiographs were used to assess the mechanical/anatomical leg alignment, which was classified as varus, valgus, or neutral. The alignment and KL was correlated with the intensity of tracer uptake in each area of interest (p < 0.05). The intensity of SPECT/CT tracer uptake in the medial and lateral knee compartment significantly correlated with varus or valgus alignment of the knee. A higher degree of osteoarthritis was significantly related to higher tracer uptake in the corresponding joint compartments. SPECT/CT reflects the specific loading pattern of the knee with regard to its alignment. It is also related to the degree of osteoarthritis. Hence, SPECT/CT should be considered for follow-up of patients after realignment treatments, osteotomies, deloader devices, or insoles.