RESUMEN
The recent progress in nanotechnology1,2 and single-molecule spectroscopy3-5 paves the way for emergent cost-effective organic quantum optical technologies with potential applications in useful devices operating at ambient conditions. We harness a π-conjugated ladder-type polymer strongly coupled to a microcavity forming hybrid light-matter states, so-called exciton-polaritons, to create exciton-polariton condensates with quantum fluid properties. Obeying Bose statistics, exciton-polaritons exhibit an extreme nonlinearity when undergoing bosonic stimulation6, which we have managed to trigger at the single-photon level, thereby providing an efficient way for all-optical ultrafast control over the macroscopic condensate wavefunction. Here, we utilize stable excitons dressed with high-energy molecular vibrations, allowing for single-photon nonlinear operation at ambient conditions. This opens new horizons for practical implementations like sub-picosecond switching, amplification and all-optical logic at the fundamental quantum limit.
RESUMEN
The development of high-speed, all-optical polariton logic devices underlies emerging unconventional computing technologies and relies on advancing techniques to reversibly manipulate the spatial extent and energy of polartion condensates. We investigate active spatial control of polariton condensates independent of the polariton, gain-inducing excitation profile. This is achieved by introducing an extra intracavity semiconductor layer, nonresonant to the cavity mode. Partial saturation of the optical absorption in the uncoupled layer enables the ultrafast modulation of the effective refractive index and, through excited-state absorption, the polariton dissipation. Utilizing an intricate interplay of these mechanisms, we demonstrate control over the spatial profile, density, and energy of a polariton condensate at room temperature.
RESUMEN
Electrically conducting and semiconducting polymers represent a special and still very attractive class of functional chromophores, especially due to their unique optical and electronic properties and their broad device application potential. They are potentially suitable as materials for several applications of high future relevance, for example flexible photovoltaic modules, components of displays/screens and batteries, electrochromic windows, or photocatalysts. Therefore, their synthesis and structure elucidation are still intensely investigated. This article will demonstrate the very fruitful interplay of current electropolymerization research and its exploitation for science education issues. Experiments involving the synthesis of conducting polymers and their assembly into functional devices can be used to teach basic chemical and physical principles as well as to motivate students for an innovative and interdisciplinary field of chemistry.
Asunto(s)
Electrónica , Polímeros , Humanos , Polímeros/química , Oxidación-Reducción , Estrés OxidativoRESUMEN
Ladder polymers with poly(diketopyrrolopyrrole) (DPP) moieties have recently attracted enormous interest for a large variety of opto-electronic applications. Since the rigidity of the backbone increases with ladderization, a strong influence on the self-organization of thin films is expected. We study the molecular orientation of DPP-based ladder polymers in about 50 nm thin films using polarization modulation-infrared reflection-absorption spectroscopy (PM-IRRAS). Exemplarily, for one polymer, the orientation in thicker films is qualitatively investigated by infrared spectroscopy in transmission. Further, this method allows us to rule out the effects of a possible azimuthal ordering, which would affect the analysis of the orientation by PM-IRRAS. For all polymers, the long axis of the polymer backbone is preferentially oriented parallel to the substrate surface, pointing to a high degree of ordering. It is suggested that the choice of the side chains might be a promising way to tune for face-on and edge-on orientations. The exemplarily performed investigation of interface properties on substrates with different work functions suggests that the choice of the side chains has a minor effect on the interfacial electronic interface structure.
RESUMEN
Side chains play an important role in the photo-oxidation process of low band gap (LBG) polymers. For example, it has been shown that their photostability can be increased by the introduction of aromatic-oxy-alkyl links. We studied the photostability of prototypical LBG polymers with alkyl and oxyalkyl side chains during irradiation with white light (AM 1.5 conditions) in dry air using UV/vis and IR spectroscopy. Though its degradation kinetics were distinctly affected by the presence or absence of oxygen in the structure of the side chains, in particular cases, the stability was more affected by the presence of linear or branched side chains. Moreover, we showed that the exact position of the alkyl/oxyalkyl side chain at the polymer backbone could be crucial. Although minor effects of chemical modifications on the electronic parameters (ionization potential and gap) were observed, the molecular orientation, determined by polarization modulation-infrared reflection-absorption spectroscopy (PMIRRAS), could be affected. The aggregation and crystallinity of these polymers may distinctly affect their stability.
RESUMEN
Ladder-type pentaphenyl chromophores have a rigid, planar π-system and show bright fluorescence featuring pronounced vibrational structure. Such moieties are ideal for studying interchromophoric interactions and delocalization of electronic excitations. We report the synthesis of helical polymers with a rigid square structure based on spiro-linked ladder-type pentaphenyl units. The variation of circular dichroism with increasing chain length provides direct evidence for delocalization of electronic excitations over at least 10 monomeric units. The change in the degree of circular polarization of the fluorescence across the vibronic side bands shows that vibrational motion can localize the excitation dynamically to almost one single unit through breakdown of the Born-Oppenheimer approximation. The dynamic conversion between delocalized and localized excited states provides a new paradigm for interpreting circular dichroism in helical polymers such as proteins and polynucleic acids.
Asunto(s)
Polímeros , Vibración , Dicroismo Circular , Polímeros/químicaRESUMEN
We report the synthesis of a new conjugated polymer bearing crown ether moieties, poly[(N(1-aza-[18]crown-6)carbamido)thiophene-2,5-diyl-alt-1,4-phenylene] (BG2). In water, BG2 forms a dispersion with a slightly cloudy appearance. We have studied the effect of adding surfactants, with different polar head groups, on these polymer-polymer aggregates. Special attention is given to the system with the anionic surfactant, sodium dodecyl sulfate (SDS). The combination of photophysical techniques with electrical conductivity, NMR (1H, 13C, and 27Na), DFT calculations, molecular dynamics simulations, and small-angle neutron scattering (SANS) provides a detailed picture on the behavior of the SDS/BG2 system in aqueous solution and in thin films. NMR, electric conductivity, and DFT results suggest that hydrophilic interactions occur between the polar headgroup of the surfactant (OSO3- Na+) and the aza-[18]-crown-6 moiety. DFT calculations confirmed the capability of BG2 to form stable complexes with the Na+ cations, where the cation can be either inside the azacrown cavity or sandwiched between the cavity and the polymer chain, which seem to determine the position of the surfactant hydrocarbon chain and, therefore, be responsible for the disruption of the BG2 aggregates and subsequent increase in the photoluminescence quantum yields. SANS measurements, made with hydrogenated and deuterated SDS in D2O, clearly show how micron-sized aggregates of BG2 are broken down by SDS and then how BG2 becomes preferentially incorporated within joint colloidal particles of BG2 and SDS with increasing [SDS]/[BG2] molar ratio.
RESUMEN
Enhancement of the luminescence efficiency of two new diazapentacenium salts (D1 and D2) of more than 55 for D1 and 22 times for D2) in poor solvents, acetonitrile and/or dichloromethane, was observed and rationalized as formation of emissive J-aggregates. Both compounds displaying 4-n-decylphenyl substituents at the 7,14-carbons and phenyl (D1) or 2,6-difluorophenyl (D2) substituents at the quaternary nitrogen atoms in 5,12-positions have been synthetized in a two-step procedure involving a two-fold Buchwald-Hartwig-type CN cross-coupling and an electrophilic Friedel-Crafts-type cyclization. The optical properties of the dicationic diazapentacenium salts in various solvents and in thin films have been investigated by steady-state and time-resolved absorption and photoluminescence spectroscopies. In thin films and in good solvents, isolated molecules coexist with aggregates. Nonetheless, D1 is seven times more emissive than D2, reflecting a higher J-aggregate contribution in the former.
RESUMEN
Polycationic stepladder polymers containing 5,12-diazapentacenium bistriflate repeat units are made in a two-step sequence of a carbon-nitrogen cross coupling polymerization and subsequent postpolymerization cyclization. The deeply colored products show a rather weak conjugative interaction between the dicationic diazapentacenium repeat units along the polymer chains.
Asunto(s)
Polímeros , Cationes , Ciclización , PolimerizacionRESUMEN
Atomically dispersed transition metal active sites have emerged as one of the most important fields of study because they display promising performance in catalysis and have the potential to serve as ideal models for fundamental understanding. However, both the preparation and determination of such active sites remain a challenge. The structural engineering of carbon- and nitrogen-coordinated metal sites (M-N-C, M = Fe, Co, Ni, Mn, Cu, etc.) via employing new heteroatoms, e.g., P and S, remains challenging. In this study, carbon nanosheets embedded with nitrogen and phosphorus dual-coordinated iron active sites (denoted as Fe-N/P-C) were developed and determined using cutting edge techniques. Both experimental and theoretical results suggested that the N and P dual-coordinated iron sites were favorable for oxygen intermediate adsorption/desorption, resulting in accelerated reaction kinetics and promising catalytic oxygen reduction activity. This work not only provides efficient way to prepare well-defined single-atom active sites to boost catalytic performance but also paves the way to identify the dual-coordinated single metal atom sites.
RESUMEN
Coherent control of single quantum systems in complex environments has great potential to manipulate and understand photoinduced chemical and biological processes on a molecular level. However, heterogeneous environments usually impede full control and complicate interpretation. Here, we demonstrate photoluminescence-detected ultrafast phase-only coherent control on single organic molecules in a disordered matrix at room temperature. Combined with a multiparameter quantum dynamics identification procedure, we reconstruct multiphoton processes and energy landscapes for each molecule. We find strong phase dependencies of the corresponding transitions into highly excited states. Importantly, also transitions into hidden states, which are not connected to photoluminescent channels, are monitored and controlled. Our combined approach provides a general toolbox to manipulate and understand ultrafast photoinduced processes in single quantum systems, which is a prerequisite to control chemical and biological function.
Asunto(s)
Teoría Cuántica , Luminiscencia , Procesos Fotoquímicos , TemperaturaRESUMEN
The electronic structure of semiconducting carbon nanotubes selected through polymer functionalization is routinely verified by measuring the spectral van Hove singularity signature under ultraclean vacuum conditions. Interpreting the effect of unperturbed polymer adsorption on the nanotube energetic bands in solvent media is experimentally challenging owing to solvent molecular crowding around the hybrid complex. Here, a liquid-based scanning tunneling microscope and spectroscope operating in a noise-free laboratory is used to resolve the polymer-semiconducting carbon-nanotube-underlying graphene heterostructure in the presence of encompassing solvent molecules. The spectroscopic measurements highlight the role of polymer packing and graphene landscape on the electronic shifts induced in the nanotube energy bands. Together with molecular dynamics simulations, our experimental findings emphasize the necessity of recording physicochemical and electronic properties of liquid-phase solubilized hybrid materials in their native state.
RESUMEN
A synthetic route to solubilized graphenic nanoribbons (GNRs) by oxidation of methylene-bridged, aromatic ladder polymers is presented. Hereby, the ladder polymer precursors are finally 2,3-dichloro-5,6-dicyano-1,4-benzoquinone (or DDQ) oxidized into the desired GNRs. However, a detailed UV-vis analysis shows already partial oxidation/dehydrogenation during aqueous work-up under loss of ≈50% of the bridgehead hydrogens as well as some indications for overoxidation with DDQ under formation of quinoid carbonyl defects, additionally driven by a reduction of the number of quinoid (quinodimethane) structural units.
Asunto(s)
Nanotubos de Carbono/química , Polímeros/química , Oxidación-ReducciónRESUMEN
The efficient synthesis of a new solution-processable n-type conjugated polymer network (PNT1) is reported through palladium-catalyzed Stille cross-coupling reaction conditions following the A3 + B2 synthetic approach. A benzo[1,2-b:3,4-b':5,6-bâ³]trithiophene derivative is used as the A3 knot and an alkyl functionalized naphthalenediimide is utilized as the B2 linker. The thermal, optical, and electrochemical properties are examined in detail, showing high thermal stability, absorbance in the visible part of the solar spectrum, and reversible reduction characteristics similar to those of the fullerene derivative [6,6]-phenyl-C71 -butyric acid methyl ester (PC71 BM). PNT1 is employed as the electron acceptor in solution-processed bulk heterojunction organic solar cells, demonstrating the potential of this new type of materials for optoelectronic applications.
Asunto(s)
Suministros de Energía Eléctrica , Luz , Polímeros/química , Soluciones/química , Imidas/química , Microscopía de Fuerza Atómica , Modelos Químicos , Estructura Molecular , Naftalenos/química , Polímeros/síntesis química , Energía Solar , Espectrofotometría , Temperatura , Tiofenos/químicaRESUMEN
Low-bandgap near-infrared polymers are usually synthesized using the common donor-acceptor (D-A) approach. However, recently polymer chemists are introducing more complex chemical concepts for better fine tuning of their optoelectronic properties. Usually these studies are limited to one or two polymer examples in each case study so far, though. In this study, the dependence of optoelectronic and macroscopic (device performance) properties in a series of six new D-A1 -D-A2 low bandgap semiconducting polymers is reported for the first time. Correlation between the chemical structure of single-component polymer films and their optoelectronic properties has been achieved in terms of absorption maxima, optical bandgap, ionization potential, and electron affinity. Preliminary organic photovoltaic results based on blends of the D-A1 -D-A2 polymers as the electron donor mixed with the fullerene derivative [6,6]-phenyl-C71 -butyric acid methyl ester demonstrate power conversion efficiencies close to 4% with short-circuit current densities (J sc ) of around 11 mA cm-2 , high fill factors up to 0.70, and high open-circuit voltages (V oc s) of 0.70 V. All the devices are fabricated in an inverted architecture with the photoactive layer processed in air with doctor blade technique, showing the compatibility with roll-to-roll large-scale manufacturing processes.
Asunto(s)
Suministros de Energía Eléctrica , Polímeros/química , Energía Solar , Estructura Molecular , Polímeros/síntesis químicaRESUMEN
We present a detailed spectroscopic study, along with the synthesis, of conjugated, ladder-type 2,7-linked poly(pyrene)s. We observe a delocalization of the first singlet excited state along the polymer backbone, i.e., across the 2,7 linkage in the pyrene moiety, in contrast to earlier studies on conjugated 2,7-linked poly(pyrene)s without ladder structure. The electronic signature of the pyrene unit is, however, manifested in an increased lifetime and reduced oscillator strength as well as a modified vibronic progression in absorption of the singlet state compared to a ladder-type poly(para-phenylene) (MeLPPP). Furthermore, the reduced oscillator strength and increased lifetime slow down Förster-type energy transfer in films, where this transfer occurs to sites with increasing inter-chain coupling of H-type nature.
RESUMEN
The selective engineering of conjugated polyelectrolyte (CPE)-phospholipid interfaces is poised to play a key role in the design of advanced biomedical and biotechnological devices. Herein, we report a strategic study to investigate the relationship between the charge of the CPE side group and their association with zwitterionic phospholipid bilayers. The interaction of dipalmitoylphosphatidylcholine (DPPC) phospholipid vesicles with a series of poly(thiophene)s bearing zwitterionic, cationic, or anionic terminal groups (P3Zwit, P3TMAHT and P3Anionic, respectively) has been probed. Although all CPEs showed an affinity for the zwitterionic vesicles, the calculated partition coefficients determined using photoluminescence spectroscopy suggested preferential incorporation within the lipid bilayer in the order P3Zwit > P3Anionic â« P3TMAHT. The polarity probe Prodan was used to further qualify the position of the CPE inside the vesicle bilayers via Förster resonance energy transfer (FRET) studies. The varying proximity of the CPEs to Prodan was reflected in the Stern-Volmer quenching constants and decreased in the order P3Anionic > P3TMAHT â« P3Zwit. Dynamic light scattering measurements showed an increase in the hydrodynamic diameter of the DPPC vesicles upon addition of each poly(thiophene), but to the greatest extent for P3Anionic. Small-angle neutron scattering studies also revealed that P3Anionic specifically increased the thickness of the headgroup region of the phospholipid bilayer. Epifluorescence and atomic force microscopy imaging showed that P3TMAHT formed amorphous agglomerates on the vesicle surface, P3Zwit was buried throughout the bilayer, and P3Anionic formed a shell of protruding chains around the surface, which promoted vesicle fusion. The global data indicate three distinctive modes of interaction for the poly(thiophene)s within DPPC vesicles, whereby the nature of the association is ultimately controlled by the pendant charge group on each CPE chain. Our results suggest that charge-mediated self-assembly may provide a simple and effective route to design luminescent CPE probes capable of specific localization within phospholipid membranes.
Asunto(s)
Membrana Celular/química , Membrana Dobles de Lípidos/química , Modelos Químicos , Fosfolípidos/química , Polímeros/química , Tiofenos/química , Transferencia Resonante de Energía de FluorescenciaRESUMEN
Five different poly(arylene-diarylvinylene)s have been synthesized by reductive polyolefination starting from the corresponding bis(α,α-dichlorobenzyl)-substituted monomers and dicobaltoctacarbonyl as reducing agent. The resulting polymers all contain main chain tetraphenylethylene units. Thanks to the aggregation-induced emission effect, the corresponding polymer films show remarkably high photoluminescence quantum yields (PLQYs) of 32%-73%. The polymer with the highest PLQY is tested as solid state sensing material for the PL-quenching-based detection of nitroaromatic analytes (1,3,5-trinitrobenzene as prototypical analyte).
RESUMEN
Conjugated polymer nanoparticles based on poly[9,9-bis(2-ethylhexyl)fluorene] and poly[N-(2,4,6-trimethylphenyl)-N,N-diphenylamine)-4,4'-diyl] are fabricated using anionic surfactant sodium dodecylsulphate in water by miniemulsion technique. Average diameters of polyfluorene and polytriarylamine nanoparticles range from 70 to 100 and 100 to 140 nm, respectively. The surface of the nanoparticles is decorated with triplet emitting dye, tris(2,2'-bipyridyl)ruthenium(II) chloride. Intriguing photophysics of aqueous dispersions of these hybrid nanoparticles is investigated. Nearly 50% quenching of fluorescence is observed in the case of dye-coated polyfluorene nanoparticles; excitation energy transfer is found to be the dominant quenching mechanism. On the other hand, nearly complete quenching of emission is noticed in polytriarylamine nanoparticle-dye hybrids. It is proposed that the excited state electron transfer from the electron-rich polytriarylamine donor polymer to Ru complex leads to the complete quenching of emission of polytriarylamine nanoparticles. The current study offers promising avenues for developing aqueous solution processed-electroluminescent devices involving a conjugated polymer nanoparticle host and Ru or Ir-based triplet emitting dye as the guest.