Circular SAW Resonators: Influence of Sensitive Element Dimensions on Strength Characteristics and First Experimental Samples.

In preceding research endeavors, the frequency characteristics of a ring resonator on surface acoustic waves made of various materials were studied. Investigations encompassed fixation techniques within the housing, the impact of external variables on these components, and the most efficient configuration of the interdigital transducer within the ring resonator to curtail bandwidth. This current study is dedicated to investigating the correlation between sensitivity and the highest measurable acceleration concerning the dimensions of these sensitive elements. Furthermore, it involves assessing the attributes of produced experimental samples to verify the simulation results. The results obtained represent the possibility of creating a micromechanical accelerometer that can be used in the automotive industry as a g-sensor shock, as well as in industries where the numerical value of high overloads is required.

New Solid-State Acoustic Motion Sensors: Sensing Potential Estimation for Different Piezo Plate Materials.

The present paper discusses the scientific and technical problem of optimizing the design and characteristics of a new type of solid-state sensors for motion parameters on bulk acoustic waves in order to increase the signal-to-noise ratio and the detectability of an informative signal against the background of its own noise and interference. Criteria for choosing materials for structural elements, including piezoelectric transducers of the sensitive element, were identified; a corresponding numerical simulation was performed using the developed program; and experimental studies according to the suggested method were carried out to validate the obtained analytical and calculated positions. The experimental results revealed the correctness of the chosen criteria for the optimization of design parameters and characteristics, demonstrated the high correlation between the results of modeling and field studies, and, thus, confirmed the prospects of using this new type of solid-state acoustic sensors of motion parameters in the navigation and control systems of highly dynamic objects.

Topological Optimization of Circular SAW Resonators: Overcoming the Discreteness Effects.

Recently, we proposed a ring-shaped surface acoustic wave (SAW) resonator sensitive element design, as well as analyzed its characteristics and suggested its optimization strategy, with major focus on their temperature stability. Here, we focus on further optimization of the design to narrow the bandwidth and improve signal detection, while taking into account typical technological limitations. Additionally, the purpose of design optimization and modeling is to check the preservation of operability in the case of lithography defects, which is the most common technological error. For that, we suggest structural alteration of the interdigital transducer (IDT) that leads to its partial fragmentation. Using COMSOL Multiphysics computer simulations, we validate several IDT options and show explicitly how it could be optimized by changing its pin geometry. Based on the results of the study, prototyping and printing of ring resonators on a substrate using photolithography will be carried out.

Corona and polio viruses are sensitive to short pulses of W-band gyrotron radiation.

The severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) pandemic has raised the need of versatile means for virus decontamination. Millimeter waves are used in biochemical research in dynamic nuclear polarization enhanced nuclear magnetic resonance (DNP/NMR) spectroscopy. However, their efficiency in object decontamination for viruses has not been tested yet. Here we report the high efficiency of 95 GHz waves in killing both coronavirus 229E and poliovirus. An exposure of 2 s to 95 GHz waves reduced the titer of these viruses by 99.98% and 99.375%, respectively, and formed holes in the envelope of 229E virions as detected by scanning electron microscopy (SEM) analysis. The ability of 95 GHz waves to reduce the coronavirus titer to a range of limited infective dose of SARS-CoV-2 for humans and animal models along with precise focusing capabilities for these waves suggest 95 GHz waves as an effective way to decontaminate objects.

Association of uncoupling protein (Ucp) gene polymorphisms with cardiometabolic diseases.

The hereditary aspect of obesity is a major focus of modern medical genetics. The genetic background is known to determine a higher-than-average prevalence of obesity in certain regions, like Oceania. There is evidence that dysfunction of brown adipose tissue (BAT) may be a risk factor for obesity and type 2 diabetes (T2D). A significant number of studies in the field focus on the UCP family. The Ucp genes code for electron transport carriers. UCP1 (thermogenin) is the most abundant protein of the UCP superfamily and is expressed in BAT, contributing to its capability of generating heat. Single nucleotide polymorphisms (SNPs) of Ucp1-Ucp3 were recently associated with risk of cardiometabolic diseases. This review covers the main Ucp SNPs A-3826G, A-1766G, A-112C, Met229Leu, Ala64Thr (Ucp1), Ala55Val, G-866A (Ucp2), and C-55 T (Ucp3), which may be associated with the development of obesity, disturbance in lipid metabolism, T2D, and cardiovascular diseases.

Challenges in urogenital tuberculosis.

PURPOSE: For better understanding of urogenital tuberculosis (UGTB), its clinical spectrum and characteristic features need to be evaluated. MATERIALS AND METHODS: One hundred and forty-two cases of UGTB patients were analyzed retrospectively. We considered age, gender, symptoms, and diagnostic procedures. RESULTS: The total of 142 patients were divided into group A (consisted of 93 patients with only urinary TB), group B (consisted of 13 male patients with generalized UGTB, including urinary TB and male genital TB (MGTB). Group C consisted of 36 patients with MGTB. Sixty patients in groups A and B 56.6% had kidney TB third-to-fourth stages, which are incurable for anti-TB therapy and require surgery. The urinary tract was involved in 48 patients (45.3%): 25 (23.6%) had ureteral TB and 23 (21.7%) had also bladder TB. The most common symptom for kidney TB was flank pain (69.8%) followed by dysuria (47.2%). Perineal pain and dysuria were most common symptoms for prostate TB and were found in 87.5% (14 patients) and 56.3% (9 patients), respectively. Of total, in only 58 UGTB patients (40.8%), the culture for Mycobacterium tuberculosis (Mtb) was positive. CONCLUSION: Of 142 patients with UGTB, 106 (74.7%) had kidney TB and 13 (9.2%) of them had kidney TB in combination with MGTB. Only MGTB (prostate, scrotal, or generalized) was diagnosed in 49 (34.5%) patients. The most common symptoms were flank pain and dysuria. Identification of Mtb in UGTB is difficult. Therefore, the most advanced microbiological technology should be used to establish the correct diagnosis.

Comparison of AlN vs. SIO2/LiNbO3 Membranes as Sensitive Elements for the SAW-Based Acceleration Measurement: Overcoming the Anisotropy Effects.

We propose the use of aluminum nitride (AlN) membranes acting as sensitive elements for the surface acoustic wave (SAW)-based acceleration measurement. The proposed solution is compared against existing prototypes based on the use of quartz (SiO2)/lithium niobate (LiNbO3) membranes that are characterized by extensive anisotropic properties. Using COMSOL Multiphysics 5.4 computer simulations we show explicitly that sensitive elements based on less anisotropic AlN membranes overcome both the low sensitivity limitations of SiO2 and low temperature stability of LiNbO3. Moreover, AlN membranes exhibit nearly double the robustness against irreversible mechanical deformations when compared against SiO2, which in turn allows for further 1.5-fold sensitivity enhancement over LiNbO3 based sensors. Taking into account their acceptable frequency characteristics, we thus believe that the AlN membranes are a good candidate forsensitive elements especially for high acceleration measurements.

The Effect of a Rotating Medium on Bulk Acoustic Wave Polarization: From Theoretical Considerations to Perspective Angular Motion Sensor Design.

We study the effects of medium rotation on bulk acoustic wave (BAW) propagation. For a theoretical analysis of the BAW propagation characteristics, a motion equation for the plane harmonic waves propagating orthogonal to the rotation axis of the propagation medium was analytically resolved. We found that during medium rotation, the polarization of the waves becomes elliptical with the ratio of the polarization ellipse axes explicitly proportional to the angular velocity of the medium rotation, thereby opening the way for the design of sensitive elements (SE) for perspective angular motion sensors (AMS). Next, an analytical dependence of the SE informative parameter on the Poisson's ratio of the acoustic duct material was obtained. The rotation effect on the dispersion of BAW propagation velocity was studied. Two approaches to the perspective SE design were proposed. An experimental study of a specially designed test assembly and SE model demonstrated high correlation with theoretical predictions and provided an estimate of a potential SE. Therefore, we believe that the study of acoustic wave propagation under nonclassical conditions is a promising direction for prospective solid-state AMS on based on BAW polarization effects design.

The Sensitive Element of Acoustic Sensor on Circular Polarized Waves: From Theoretical Considerations towards Perspective Rotation Rate Sensors Design.

In this paper, the perspectives of using the features of acoustic wave propagation to design rotation rate sensors (RRS) are discussed. The possibility of developing the solid-state sensitive elements (SE) of RRS on acoustic waves of circular polarization is shown. The theoretical basis of bulk acoustic wave propagation under rotation is given. The direct excitation of circularly polarized acoustic wave (CPAW) is considered, the design of the CPAW emitting transducer is offered. The results of experimental studies that indicated the circular nature of the particle motions in the radiated wave are discussed. The principally new concept of the RRS SE design on CPAW, being able to operate under high vibration and acceleration, is proposed. The experimental results revealed a high correlation with theoretical and numerical predictions and confirmed RRS on CPAW operability.

Surface-Acoustic-Wave Sensor Design for Acceleration Measurement.

We suggest a concept design of a SAW-based microaccelerometer with an original triangular-shaped console-type sensing element. Our design is particularly optimized to increase the robustness against positioning errors of the SAW resonators on the opposite sides of the console. We also describe the results of computer simulations and laboratory tests that are in a perfect agreement with each other and present the sensitivity characteristics of a manufactured experimental design device.

Physical Principles of a Piezo Accelerometer Sensitive to a Nearly Constant Signal.

The paper considers the construction of a piezoelectric accelerometer capable of measuring constant linear acceleration. A number of designs are proposed that make it possible to achieve high sensitivity with small dimensions and a wide frequency band (from 10-5 Hz). The finite element model of the proposed design was investigated, and its output characteristic and scale factor (36 mV/g) were obtained.

Gate-Sensing Coherent Charge Oscillations in a Silicon Field-Effect Transistor.

Quantum mechanical effects induced by the miniaturization of complementary metal-oxide-semiconductor (CMOS) technology hamper the performance and scalability prospects of field-effect transistors. However, those quantum effects, such as tunneling and coherence, can be harnessed to use existing CMOS technology for quantum information processing. Here, we report the observation of coherent charge oscillations in a double quantum dot formed in a silicon nanowire transistor detected via its dispersive interaction with a radio frequency resonant circuit coupled via the gate. Differential capacitance changes at the interdot charge transitions allow us to monitor the state of the system in the strong-driving regime where we observe the emergence of Landau-Zener-Stückelberg-Majorana interference on the phase response of the resonator. A theoretical analysis of the dispersive signal demonstrates that quantum and tunneling capacitance changes must be included to describe the qubit-resonator interaction. Furthermore, a Fourier analysis of the interference pattern reveals a charge coherence time, T2 ≈ 100 ps. Our results demonstrate charge coherent control and readout in a simple silicon transistor and open up the possibility to implement charge and spin qubits in existing CMOS technology.

Low-Frequency Dielectric Relaxation in Structures Based on Macroporous Silicon with Meso-Macroporous Skin-Layer.

The spectra of dielectric relaxation of macroporous silicon with a mesoporous skin layer in the frequency range 1-106 Hz during cooling (up to 293-173 K) and heating (293-333 K) are presented. Macroporous silicon (pore diameter ≈ 2.2-2.7 µm) with a meso-macroporous skin layer was obtained by the method of electrochemical anodic dissolution of monocrystalline silicon in a Unno-Imai cell. A mesoporous skin layer with a thickness of about 100-200 nm in the form of cone-shaped nanostructures with pore diameters near 13-25 nm and sizes of skeletal part about 35-40 nm by ion-electron microscopy was observed. The temperature dependence of the relaxation of the most probable relaxation time is characterized by two linear sections with different slope values; the change in the slope character is observed at T ≈ 250 K. The features of the distribution of relaxation times in meso-macroporous silicon at temperatures of 223, 273, and 293 K are revealed. The Havriliak-Negami approach was used for approximation of the relaxation curves ε″ = f(ν). The existence of a symmetric distribution of relaxers for all temperatures was found (Cole-Cole model). A discussion of results is provided, taking into account the structure of the studied object.

Physiological status of broiler chickens with diets supplemented with milk thistle extract.

BACKGROUND AND AIM: In recent decades, the use of various feed supplements is the current trend in poultry farming, among which phytogenics serve as alternatives to feed antibiotics. This study aimed to examine the effect of feeding various doses of milk thistle extract (Silybum marianum) on the morphological and biochemical parameters of the blood in broiler chickens. MATERIALS AND METHODS: Experiments were carried out in an industrial poultry farm on broiler chickens of the Hubbard ISA F15 cross for 40 days. One control group and five experimental groups of day-old chickens were formed. The number of birds in each group was 50. Broilers of all groups received complete feed, and the experimental groups received an additional milk thistle extract at doses of 0.1, 0.5, 1.0, 1.5, and 2.0 mg/kg of body weight. Milk thistle medicinal plant extract was obtained using water-ethanol extraction followed by low-temperature vacuum drying. For the assessment of blood analyses, samples were collected from the wing vein of six chickens per group. Using unified methods recommended by the International Federation of Clinical Chemistry, the content of red blood cells, hemoglobin, white blood cells, total protein, protein fractions, triglycerides, glucose, calcium, phosphorus, and the concentration of alanine aminotransferase and aspartate aminotransferase in the blood serum were determined. RESULTS: It was found that the introduction of milk thistle extract into the diet of broiler chickens with the aforementioned doses increased the number of red blood cells, hemoglobin, white blood cells in the blood, as well as a decrease in the level of albumin and an increase in the content of γ-globulins in its serum. CONCLUSION: The authors assume that the introduction of milk thistle extract into a complete feed for broiler chickens increased the anabolic processes in their bodies, accompanied by increased use of proteins of the albumin fraction as the main material for organogenesis.

Formation of a Complex Topologies of SAW-Based Inertial Sensors by Laser Thin Film Local Evaporation.

Originally, sensors based on surface acoustic waves are fabricated using photolithography, which becomes extremely expensive when a small series or even single elements are needed for the research. A laser thin film local evaporation technique is proposed to substitute the photolithography process in the production of surface acoustic wave based inertial sensors prototypes. To estimate its potential a prototype of a surface acoustic wave gyroscope sensing element was fabricated and tested. Its was shown that the frequency mismatch is no more than 1%, but dispersion of the wave on small inertial masses leads to a spurious parasitic signal on receiving electrodes. Possible ways of its neglecting is discussed.

Snap-through transition of buckled graphene membranes for memcapacitor applications.

Using computational and theoretical approaches, we investigate the snap-through transition of buckled graphene membranes. Our main interest is related to the possibility of using the buckled membrane as a plate of capacitor with memory (memcapacitor). For this purpose, we performed molecular-dynamics (MD) simulations and elasticity theory calculations of the up-to-down and down-to-up snap-through transitions for membranes of several sizes. We have obtained expressions for the threshold switching forces for both up-to-down and down-to-up transitions. Moreover, the up-to-down threshold switching force was calculated using the density functional theory (DFT). Our DFT results are in general agreement with MD and analytical theory findings. Our systematic approach can be used for the description of other structures, including nanomechanical and biological ones, experiencing the snap-through transition.

The expression profile of integrin receptors and osteopontin in thyroid malignancies varies depending on the tumor progression rate and presence of BRAF V600E mutation.

Thyroid cancer (TC) is one of the most common malignancy of the human endocrine system. BRAF V600E mutation is the most frequent genetic alteration of papillary carcinoma, the most frequent TC, which effects RAS-RAF-MEK intracellular signaling pathway. These alterations in RAS-RAF-MEK pathway lead to changes in expression levels of cell membrane integrin receptors and their ligand - extracellular matrix protein osteopontin, which in turn increases the metastatic potential of tumor cells. Thus, integrins and their ligand osteopontin can be considered as potential biomarkers of tumor progression and aggressive tumor phenotypes. The aim of the study was to evaluate the expression levels of integrin receptors ITGA2, ITGA3, ITGAV, ITGA6, ITGA9, ITGB1, ITGB3 and their ligands OPNa, OPNb in the thyroid cancer with different BRAF V600E mutation status. METHODS: Thyroid tumor samples of 70 patients obtained during surgical treatment were analyzed. Expression levels of the investigated genes were evaluated by real time RT-PCR. Fluorescent immunohistochemistry (IHC) was used to confirm the PCR results and to estimate the amount of protein levels. For IHC frozen sections were used. BRAF V600E mutation was determined using allele-specific amplification. Nonparametric criteria (Kruskal Wallis, Wilcoxon and Mann-Whitney tests) were used to evaluate group differences. P values of less than 0.05 were considered as statistically significant. RESULTS: A higher gene expression level of ITGA2 (1.9-fold, p = 0.037), ITGA3 (21.1-fold, p = 0.041) and ITGA5 (2.08-fold, p = 0.048) was observed in papillary thyroid cancer (PTC) tissue in comparison with median expression level in control samples (conventionally normal tissue of thyroid gland). These changes were confirmed by IHC (significant changes for α2 integrin). ITGAV expression level was statistically significantly higher in follicular thyroid cancer (FTC) (2.0-fold, p = 0.040). Next, high gene expression levels in tissue samples of lymph node metastases were observed for ITGA5 (2.92-fold, p = 0.015), OPNb (4.36-fold, p = 0.037). For genes ITGA3 (37.48-fold, p = 0.017790), ITGA6 (18.76-fold, p = 0.028921) and ITGA9 (12.52-fold, p = 0.026710) higher expression level was detected in T3-4 tumors (TNM) compared to tumors classified as T1-2. Presence of BRAF V600E mutation was identified in 20 samples of PTC of 40 (50%). A significant increase of the expression level only of ITGA3 (3.1-fold, p = 0. 0422) was observed in BRAF V600E positive samples. Further, changes in expression levels of integrins and osteopontin were assessed in benign and malignant neoplasms. In PTC samples higher expression of ITGA2 (2.8-fold, p = 0.005), ITGA6 (2.11, p = 0.03) and ITGB1 (2.32-fold, p = 0.02) was detected. In FTC expression level of ITGA6 (2.67, p = 0.007) was higher than in benign thyroid nodules. CONCLUSION: Identified changes in expression levels of the studied genes indicate that they could play an important role in tumor progression, and their expression could be affected by the product of mutant BRAF gene. Integrins and their ligand osteopontin might be considered as potential markers in determining prognosis and treatment of TC.

Memristive Sisyphus circuit for clock signal generation.

Frequency generators are widely used in electronics. Here, we report the design and experimental realization of a memristive frequency generator employing a unique combination of only digital logic gates, a single-supply voltage and a realistic thresholdtype memristive device. In our circuit, the oscillator frequency and duty cycle are defined by the switching characteristics of the memristive device and external resistors. We demonstrate the circuit operation both experimentally, using a memristor emulator, and theoretically, using a model memristive device with threshold. Importantly, nanoscale realizations of memristive devices offer small-size alternatives to conventional quartz-based oscillators. In addition, the suggested approach can be used for mimicking some cyclic (Sisyphus) processes in nature, such as "dripping ants" or drops from leaky faucets.

A comparison of magnetic fields inside and outside high-voltage urban 110-kV power substations with the exposure recommendations of the Ukrainian regulatory authorities.

The aim of this study was to carry out theoretical investigations of power frequency magnetic fields (MFs), produced inside and outside the domain of urban 110-kV power substations and to establish a correspondence between the levels of the fields and the specified population limits as defined by Ukrainian regulations. The fields produced by high-voltage substations were studied based on the application of the numerical finite element methodology. The investigations have shown that magnetic flux density values calculated inside and outside the considered 110-kV power substations do not reach the exposure limits specified by the Ukrainian regulations (1750 µT) and by international guidelines (ICNIRP 2010). Inside the domain of the substation, the maximum value of MFs was found under the 10-kV busbars and it equalled 420 µT.