ELIXCYTE®, an Allogenic Adipose-Derived Stem Cell Product, Mitigates Osteoarthritis by Reducing Inflammation and Preventing Cartilage Degradation In Vitro.

Adipose-derived stem cells (ADSCs) comprise a promising therapy for osteoarthritis (OA). The therapeutic potential of ELIXCYTE®, an allogeneic human ADSC (hADSC) product, was demonstrated in a phase I/II OA clinical trial. However, the exact mechanism underlying such effects is not clear. Moreover, studies suggest that interleukin-11 (IL-11) has anti-inflammatory, tissue-regenerative, and immune-regulatory functions. Our aim was to unravel the mechanism associated with the therapeutic effects of ELIXCYTE® on OA and its relationship with IL-11. We cocultured ELIXCYTE® with normal human articular chondrocytes (NHACs) in synovial fluid obtained from individuals with OA (OA-SF) to investigate its effect on chondrocyte matrix synthesis and degradation and inflammation by assessing gene expression and cytokine levels. NHACs exposed to OA-SF exhibited increased MMP13 expression. However, coculturing ELIXCYTE® with chondrocytes in OA-SF reduced MMP13 expression in chondrocytes and downregulated PTGS2 and FGF2 expression in ELIXCYTE®. ELIXCYTE® treatment elevated anti-inflammatory cytokine (IL-1RA, IL-10, and IL-13) levels, and the reduction in MMP13 was positively correlated with IL-11 concentrations in OA-SF. These findings indicate that IL-11 in OA-SF might serve as a predictive biomarker for the ELIXCYTE® treatment response in OA, emphasizing the therapeutic potential of ELIXCYTE® to mitigate OA progression and provide insights into its immunomodulatory effects.

Precise joint preserving surgery by using Three-Dimensional Printing Technology for metastatic periacetabular bone tumor: A technique note and preliminary report.

BACKGROUND/PURPOSE: Complex arthroplasties for periacetabular metastatic lesions can result in complications including infection and prosthesis loosening owing to poor bone quality. A new surgical protocol has been developed as a joint-sparing surgery to avoid complications after arthroplasties. The main surgical steps are: (a) conservative and accurate tumor resection with aid of 3D printing model-assisted preoperative resection simulation and preparation of pre-contour plate, (b) reconstruction with structural bone graft through the sandwich technique for augmentation of subchondral bone. METHODS: This retrospective study consisted of 6 patients (5 with metastatic bone tumors and one with multiple myeloma). The pelvic bone resection as defined by Enneking and Dunham were typed I + II in 2 patients and type II in 4 patients. The medical records, images, musculoskeletal tumor society (MSTS) score and visual analogue scale (VAS) were used for evaluation. RESULTS: The mean operative time was 234 minutes, and the average surgical blood loss was 1408 mL. The mean follow-up period was 21 months. The mean VAS significantly decreased at postoperative 1-week and 1-year follow-up. There were no intraoperative or early postoperative complications. The median MSTS score during the final follow-up was 26 points (range, 14-28 points). Except for one case who experienced severe joint destruction, all the other five cases were classified as excellent or good (>15). CONCLUSION: With precise tumor resection and reconstruction with sandwich procedure, the joint-sparing surgery can be performed in selected patients with metastatic periacetabular tumors.

Early fixation failure of locked plating in complex distal femoral fractures: Root causes analysis.

BACKGROUND/PURPOSE: Orthopaedic Trauma Association (OTA) C-type distal femoral fractures can be very challenging to treat effectively. While locked plating is widely used in the complex distal femoral fracture, failure of locked plate fixation is not uncommon. First, we tried to determine the risk factor related to early failure of multiplanar OTA C-type fracture in the distal femur after fixation with lateral locked plate. Second, we tried to provide a strategy for surgeons to prevent pitfalls of early failure in the complex distal femoral fractures treated with lateral locked plating. METHODS: We retrospectively reviewed 44 adults with OTA C-type fractures of the distal femur treated with locked plate fixation between 2010 and 2016 at Tri-Service General Hospital. Average length of follow-up was 27.6 months (range, 12-54 months). Univariate and multivariate logistic regression were used to determine the association of variables on early failure of fixation. A p-value < 0.05 in univariate and multivariate analyses were considered significant. RESULTS: There were six patients experiencing early failure, and the early failure rate was 13.6%. The risk factors associated with early failure of complex distal femoral fracture identified by univariate analysis included sagittal oblique fracture pattern, longer working length and post-operative sagittal malalignment (odds ratio [OR] and 95% confidence intervals [CI]: 90.00 (6.85-1183.33), 0.55 (0.31-0.98) and 8.63 (1.077-69.075) respectively). The multivariate analysis showed only sagittal oblique fracture pattern was associated with early failure [OR: 52.348 (3.06-895.23)]. CONCLUSION: Sagittal oblique fracture was more likely to result in early postoperative failure. Early recognition of the fracture pattern should be considered to avoid catastrophic results.

Biomechanical comparison between solid and cannulated intramedullary devices for midshaft clavicle fixation.

BACKGROUND: A method of closed reduction and internal fixation with cannulated screws was proposed as a surgical treatment of midshaft clavicle fractures. However, there are no mechanical studies about the cannulated screw used in the fixation of midshaft clavicle fracture. We conducted this study to compare the construct bending stiffness of a fixation midshaft clavicle fracture with a Knowles pin, cannulated screw and reconstruction plate. In addition, purchase lengths of both intramedullary devices were measured. METHODS: After transverse osteotomy over the midpoint for fracture simulation, eighteen synthetic clavicles were assigned to 3 groups and fixed with reconstruction plate, Knowles pin or cannulated screw. Purchase length was defined as the engaged length of the intramedullary portion of the two intramedullary devices Stiffness, yield load and maximum load of the cantilever bending test were calculated of each tested synthetic bones. RESULTS: The Knowles pin group had a significantly longer average intramedullary purchase length compared with that of the cannulated screw group. The construct stiffness in the reconstruction plate group (5.6 ± 0.9 N/mm) was higher than that of the intramedullary devices; the Knowles pin group (3.1 ± 0.6 N/mm) provided a greater construct stiffness than did the cannulated screw group (1.7 ± 0.4 N/mm) (p = 0.007). The cannulated screw group had the lowest yield and maximum load compared with the reconstruction plate and Knowles pin groups. Both the reconstruction plate and Knowles pin failed at the implant-bone interface. However, the cannulated screw group failed at the osteotomy site with broken implants. CONCLUSION: This study suggests that fixation of midshaft clavicle fractures with cannulated screws may lead to early failure due to inadequate mechanical strength. Ideal intramedullary clavicle devices should supply adequate intramedullary purchase lengths and mechanical strength.

Intervertebral disc needle puncture injury can be repaired using a gelatin-poly (γ-glutamic acid) hydrogel: an in vitro bovine biomechanical validation.

PURPOSE: The subtle impairments of the disc due to anular punctures may have an immediate effect on the functional integrity due to the altered intradiscal pressure, hence the subsequent catabolic degradation. This study evaluates functional restoration of needle puncture injured intervertebral discs with a newly developed injectable hydrogel using the quantitative discomanometry (QD) test. The proposed hydrogel is composed of gelatin and poly (γ-glutamic acid) (γ-PGA) and crosslinked with 1-(3-dimethylaminopropyl)-3-ethyl-carbodiimide hydrochloride (EDC). METHODS: Thirty-six bovine motion segments were distributed into six groups. Needle puncture injured discs were created in all discs except for those in the first group (intact). The second group included injured discs that received no treatment (injury). The remaining four groups included injured discs repaired with injected hydrogels fabricated with different polymer solutions and EDC concentrations including: gelatin/γ-PGA solution crosslinked with the EDC solution at a 10:1 and 40:1 ratio to form the GP/E(10:1) and GP/E(40:1) groups, respectively, and gelatin and γ-PGA solution crosslinked with the EDC solution at a 10:1 ratio to form the G/E(10:1) or P/E(10:1) groups. The QD tests were performed to evaluate disc integrity of all six groups. RESULTS: Among all hydrogel repair groups, the GP/E(10:1) group was found to have the highest leakage and saturate pressure and was the only group comparable to the intact one. CONCLUSIONS: Restoration of disc integrity secondary to needle puncture injury can be achieved via the repair with the newly developed gelatin hydrogel incorporated with γ-PGA and EDC. These slides can be retrieved under Electronic Supplementary Material.

Cervical Disc Arthroplasty (CDA) versus Anterior Cervical Discectomy and Fusion (ACDF) for Two-Level Cervical Disc Degenerative Disease: An Updated Systematic Review and Meta-Analysis.

Background: Anterior cervical discectomy and fusion (ACDF) and cervical disc arthroplasty (CDA) are both considered to be efficacious surgical procedures for treating cervical spondylosis in patients with or without compression myelopathy. This updated systematic review and meta-analysis aimed to compare the outcomes of these procedures for the treatment of cervical degenerative disc disease (DDD) at two contiguous levels. Methods: The PubMed, EMBASE, and Cochrane CENTRAL databases were searched up to 1 May 2023. Studies comparing the outcomes between CDA and ACDF in patients with two-level cervical DDD were eligible for inclusion. Primary outcomes were surgical success rates and secondary surgery rates. Secondary outcomes were scores on the Neck Disability Index (NDI) and Visual Analogue Scale (VAS) for neck and arm pain, as well as the Japanese Orthopaedic Association (JOA) score for the severity of cervical compression myelopathy and complication rates. Results: In total, eight studies (two RCTs, four retrospective studies, and two prospective studies) with a total of 1155 patients (CDA: 598; ACDF: 557) were included. Pooled results revealed that CDA was associated with a significantly higher overall success rate (OR, 2.710, 95% CI: 1.949-3.770) and lower secondary surgery rate (OR, 0.254, 95% CI: 0.169-0.382) compared to ACDF. In addition, complication rates were significantly lower in the CDA group than in the ACDF group (OR, 0.548, 95% CI: 0.326 to 0.919). CDA was also associated with significantly greater improvements in neck pain VAS than ACDF. No significant differences were found in improvements in the arm VAS, NDI, and JOA scores between the two procedures. Conclusions: CDA may provide better postoperative outcomes for surgical success, secondary surgery, pain reduction, and postoperative complications than ACDF for treating patients with two-level cervical DDD.

Patent blue versus methylene blue and indigo carmine as a better dye for chromodiscography: in vitro staining efficacy and cytotoxicity study using bovine coccygeal intervertebral discs.

BACKGROUND CONTEXT: Chromodiscography is an integral part of full-endoscopic discectomy (FED), comprising ordinary discography with radiopacity produced by contrast medium and intradiscal stain for visualizing annular defects in the endoscopic field. Nevertheless, concerns remain about the cytotoxicity of the stains used. The study of their staining efficacy is also lacking. PURPOSE: To evaluate the feasibility of methylene blue, patent blue, and indigo carmine for intradiscal injection, investigate the effectiveness of each dye, and define critical concentration with adequate staining efficacy and tolerable cytotoxicity for use in chromodiscography during FED. STUDY DESIGN: An experimental in vitro study. METHODS: Dye stock solutions were prepared from powder. The stock was diluted with culture medium or balanced saline and used for cytotoxicity or intervertebral disc staining assays, respectively. Bovine tails were obtained from the local slaughterhouse and functional spine units of intervertebral discs were acquired by transverse incision at the disc level. Each disc was punctured over the posterolateral aspect using a surgical knife to simulate an annular defect. The intradiscal injection was performed with each dye at different concentrations using a 22G needle from the contralateral aspect of the punctured site. Staining efficacy was quantified using ImageJ software. Primary cells of bovine tails were cultivated in each dye at different concentrations. Cytotoxicity was assessed 24 hours after stain exposure using the CCK-8 toxicity assay. RESULTS: Staining efficacy and cytotoxicity were proportional to the concentration of tested dyes. Lower limits of concentration producing significant staining efficacy of indigo carmine, methylene blue, and patent blue were 0.25 mg/mL, 0.25 mg/mL, and 0.05 mg/mL, respectively. Compared with controls, concentrations showing significant toxicity for indigo carmine, methylene blue, and patient blue were 1 mg/mL, 0.5 mg/mL, and 2.5 mg/mL, respectively. CONCLUSIONS: Patent blue can serve as a more suitable tissue stain than either indigo carmine or methylene blue due to the widest range of tradeoff concentration within 0.05 to 2.5 mg/mL. CLINICAL SIGNIFICANCE: Patent blue with the characteristic of good staining efficacy and lower cytotoxicity may be a promising option for chromodiscography during FED.

Gelatin-Poly (γ-Glutamic Acid) Hydrogel as a Potential Adhesive for Repair of Intervertebral Disc Annulus Fibrosus: Evaluation of Cytocompatibility and Degradability.

STUDY DESIGN: An in vitro experimental study testing a Gelatin-poly (γ-glutamic acid) hydrogel for disc repair. OBJECTIVE: To evaluate the cytocompatibility and degradability of the above mentioned hydrogel for intervertebral disc annular fibrosis (AF) repair. SUMMARY OF BACKGROUND DATA: No repair strategies for correcting annular defects in lumbar discectomy have been clinically well recognized. Exogenous supplementation of regenerative materials to fill defects is a minimally invasive way to restore compromised mechanical properties. The injected materials, most commonly gelatin-based materials with cross-linking agents, serve as sealants and as a scaffold for incorporating biomaterials for augmentation. However, cytotoxicity of hydrogel crosslinking agents is of concern in developing viable materials. METHODS: This in vitro experimental study evaluated a newly developed gelatin-based hydrogel for intervertebral disc AF repair. Mechanical strength was augmented by γ-PGA, and 1-(3-dimethylaminopropyl)-3-ethyl-carbodiimide hydrochloride (EDC) was used for material crosslinking. Isolated bovine tail intervertebral discs (IVDs) were used to test the hydrogel, and hydrogel surface monolayer AF cell culture was used to investigate efficacy in hydrogel constructs of different EDC concentrations. Cell metabolic activity was evaluated with Alamar blue assay, cell viability assay with live/dead stain, and sulfated glycosaminoglycan (GAG) and double strain DNA were quantified to evaluate proliferation of implanted cells and synthesis of extracellular matrix (ECM) proteins. RESULTS: EDC concentrations from 10 to 40 mM resulted in significant decreases in AF cell proliferation without obvious influence on cell viability. Higher EDC concentrations resulted in decreased percentage of Alamar blue reduction and GAG and DNA concentration, but did not affect GAG/DNA and live-dead ratios. Degradation tests revealed that higher EDC concentrations decreased the hydrogel degradation rate. CONCLUSION: The developed gelatin-poly (γ-PGA) hydrogel with 20 mM EDC concentration provides an effective gap-filling biomaterial with good cytocompatibility, suggesting substantial promise for use as a sealant for small AF defects.Level of Evidence: N/A.

Impact of High-intensity Zones on Their Corresponding Lumbar Spine Segments: A Propensity Score-matched Analysis.

STUDY DESIGN: Retrospective radiographic study. OBJECTIVE: The aim of this study was to compare disks with and without high-intensity zones (HIZ) to understand the impact of an HIZ on the stability of corresponding lumbar spinal segments. SUMMARY OF BACKGROUND DATA: Previous studies have established a relationship between back pain and the presence of HIZ on T2-weighted images of magnetic resonance imaging. These previous studies, however, used either plain radiographs or static (neutral position) magnetic resonance imaging to assess their chosen variables. MATERIALS AND METHODS: We retrospectively reviewed 140 consecutive patients with MR images taken in weight-bearing neutral, flexion, and extension positions. We separated segments into those with HIZ and without HIZ and assessed the grade of disk degeneration for each segment. Subsequently, a matched control group was selected from the segments without HIZ. Multiple factors were compared in a univariate analysis. A multinomial logistic regression analysis was conducted to assess the association between angular range of motion (ROM) >10 degrees and translational motion >2 mm with multiple independent variables. RESULTS: Upon assessment of the 700 lumbar segments, 70 (10%) segments had an HIZ and 68 patients had a single HIZ. On univariate analysis, the presence of an HIZ was not found to be significantly associated with degree of fatty muscle degeneration (P=0.969), muscle volume (P=0.646), degree of facet joint osteoarthritis (P=0.706), intervertebral disk height (P=0.077), Modic change (P=0.951), lower endplate shape (P=0.702), upper endplate shape (P=0.655), or degree of disk degeneration (P=0.607). Multifactorial analysis showed that none of the independent variables significantly correlated with angular ROM >10 degrees. For translational motion, the only significant correlation was the Goutallier classification (P=0.017). CONCLUSIONS: The presence of HIZ did not significantly affect spinal stability as measured by angular ROM and translational motion and was not associated with significant changes in several quantitative measurements of spine pathology.

Using a modified Pauwels method to predict the outcome of femoral neck fracture in relatively young patients.

BACKGROUND: Pauwels classification has long been used in femoral neck fracture to measure the inclination of the fracture line and is still widely used. In recent years, however, some studies have contested the reliability of this measurement method. This study investigates modified measurement method to assess the inclination angle with assisted parameters to evaluate the correlation between the different angles and the incidences of loss of reduction, nonunion and avascular necrosis. PATIENTS AND METHODS: A retrospective study was conducted to analyse the clinical data of 209 relatively young patients (between 20 and 60 years old) with intracapsular femoral neck fracture fixed by inverted triangular screws between January 2004 and December 2010, including 111 males and 98 females, with an average age of 47.08±9.93 years. Using the modified measurement method, the pre-operative inclination angles of patients with intracapsular femoral neck fracture were analyzed. The measured angles were classified into three types: type I, <30 degrees; type II, 30-50 degrees; and type III, >50 degrees. RESULTS: With regard to loss of reduction, nonunion and avascular necrosis, there were no significant differences with respect to age, sex and fracture side. However, there were significant differences with respect to fracture type, reduction quality and different modified Pauwels types. In the multiple regression analysis, the factors associated with loss of reduction were the fracture type (odds ratio [OR]=7.22), reduction quality (anatomic vs unacceptable reduction, OR=0.11; acceptable vs unacceptable reduction, OR=0.23), and modified Pauwels type (type II vs type III, OR=0.36). The factors associated with fracture nonunion were the fracture type (OR=9.43), reduction quality (acceptable vs unacceptable reduction, OR=0.17) and modified Pauwels type (type II vs type III, OR=0.22). And the factors associated with avascular necrosis were the modified Pauwels type (type I vs type III, OR=0.15; type II vs type III, OR=0.36). CONCLUSIONS: A displaced fracture, poor reduction quality and high modified Pauwels type are noted risk factors for loss of reduction and fracture nonunion in the post-operative follow up of intracapsular femoral neck fracture. The modified Pauwels type is also noted a risk factor for avascular necrosis. Thus, this modified method is a useful tool for correcting the deficiencies of traditional Pauwels classification and predicting the outcome of femoral neck fractures.

The thickness of the anterior compartment does not indicate compartment syndrome in acutely traumatised legs?

BACKGROUND: The study was conducted to achieve early detection of increased compartment pressure by comparing the changes between the thickness and pressure within the musculofascial compartments after lower leg injury. METHODS: We included cases of a lower-leg fracture between January and December 2007. Bilateral lower leg compartment pressure and thickness were measured before the surgery and post-anaesthesia, and the surgery was performed within 12 h after the initial trauma. The intracompartment pressure (ICP) was measured with a Wick catheter pressure monitor. The thickness (width) of the anterior compartment of lower leg was measured using ultrasound. RESULTS: All data were measured within 4-6h of the injury. The average thickness in injured legs versus uninjured was 30 mm (15-46 mm) versus 20.4 mm (13-30 mm), P<0.001. The average intracompartment pressure (ICP) in injured leg versus uninjured was 45.3 mmHg (26-80 mmHg) versus 17.5 mmHg (15-20 mmHg), P<0.001. The thickness and ICP were significantly increased for injured lower legs compared to the uninjured legs, but the increase in ICP did not show a significant relationship with the change in thickness of the injured lower leg. CONCLUSION: In this study, the results of ICP and thickness changes of injury lower leg compared with uninjured leg revealed no statistically significant correlation. Some injuries showed a high ICP with only mild changes in thickness, while some showed a high ICP with significant changes. Although ultrasound has many advantages for the evaluation of soft tissue changes after trauma, this study revealed that thickness changes are not a predicable parameter for determining pressure on the acute fracture of lower leg.

Risk factors for nonunion in patients with intracapsular femoral neck fractures treated with three cannulated screws placed in either a triangle or an inverted triangle configuration.

BACKGROUND: Intracapsular femoral neck fractures are associated with high rates of nonunion. We aimed to identify risk factors for nonunion in patients with both displaced and nondisplaced intracapsular femoral neck fractures treated with three 7-mm parallel cannulated screws, placed in either a triangle or an inverted triangle configuration, using failure of fixation as the primary outcome. METHODS: Clinical and radiographic data for patients with intracapsular femoral neck fractures treated with either triangle fixation (one proximal screw and two distal screws) or inverted triangle fixation (two proximal screws and one distal screw), between January 1, 2000, and July 30, 2009, were analyzed. RESULTS: A total of 202 patients, seventy-six men and 126 women with an average age (and standard deviation) of 64.53 ± 15.81 years (range, nineteen to ninety-three years), were included in the analysis. Union occurred in 158 patients, and nonunion occurred in forty-four. There were no differences between the union and nonunion groups with respect to age, sex, fracture side, fracture angle, fracture level, or estimated bone density. There were significant differences in fracture type, fixation configuration, reduction quality, and screw-tip subchondral purchase between patients with and without union. The estimated odds ratio for fracture nonunion was 2.93 (95% confidence interval [CI], 1.08, 7.96) in subjects with displaced fractures compared with those without displaced fractures (p = 0.035), 18.92 (95% CI, 1.91, 187.09) in subjects with borderline and unacceptable reduction compared with those with anatomic reduction (p = 0.012), and 2.92 (95% CI, 1.27, 6.69) for internal fixation with a triangle configuration compared with fixation with an inverted triangle configuration (p = 0.010). CONCLUSIONS: Screw fixation with a triangle configuration, a displaced fracture, and poor reduction are risk factors for nonunion in intracapsular femoral neck fractures treated with fixation with multiple screws.

Redisplacement of diaphyseal fractures of the forearm after closed reduction in children: a retrospective analysis of risk factors.

OBJECTIVES: Manipulation and plaster fixation is the primary management for diaphyseal fractures of the radius and/or ulna in children. This study was designed to evaluate risk factors of fracture redisplacement after closed reduction and cast immobilization. DESIGN: Retrospective study. SETTING: Tertiary hospital. PATIENTS: Fifty-seven children with fractures of the radius were included. INTERVENTION: The medical records of patients with/without ulna treated with closed reduction and casting were reviewed. MAIN OUTCOME MEASURES: Data analyzed were age, sex, dominant hand, fracture pattern, reduction quality, experience of the surgeon, and type of anesthesia. Logistic regression was used for multivariate analysis. RESULTS: There were 41 (71.9%) males and 16 (28.1%) females with a mean age of 9.74 ± 3.07 years. There were 53 radius fractures and 54 ulna fractures, and 22 subjects experienced redisplacement. The redisplacement rate of radius fractures was 34% and of ulnar fractures was 27.8%. Multivariate analysis showed that the factors associated with redisplacement of radius fractures were fair reduction quality [odds ratio (OR), 8.45] and complete fracture (OR 9.62) and those for redisplacement of ulna fractures were fair reduction quality (OR 8.10) and complete fracture (OR 8.43). CONCLUSIONS: Poorer reduction and complete fracture are more likely to result in redisplacement, and surgical management may be considered in these cases.

Clinical outcome of arthroscopic fixation of anterior tibial eminence avulsion fractures in skeletally mature patients: a comparison of suture and screw fixation technique.

BACKGROUND: Extreme tensile force to the anterior cruciate ligament results in an avulsion of the tibial eminence and it was believed to be more common in skeletally immature adolescent than adult. The purpose of this study is to compare the clinical results of both screw and suture fixation for surgical treatment of anterior tibial eminence fractures in skeletally mature patients. METHODS: A retrospective review was conducted on patients from 2002 to 2009 who sustained fractures of the anterior tibial eminence and were treated with arthroscopic-assisted fixation using either cannulated screws (25 patients) or Ethibond sutures (23 patients). Follow-up assessment included function evaluation, ligament laxity, and range of motion. RESULTS: Seventy-five percent of the anterior tibial eminence fractures resulted from traffic-related injuries in this study. Median operating time was 75 minutes in screw fixation group and 92 minutes in suture fixation group (p = 0.006). The objective International Knee Documentation Committee (IKDC) results for patients were 23 A, 2 B, and no C or D in screw fixation group and 16 A, 4 B, 3 C, and no D (p = 0.040) in suture fixation group. The KT-1000 side-to-side difference was greater than 5 mm in two patients (8%) in the screw fixation group and in three patients (13%) in the suture fixation group (p = 0.058). Among patients in screw fixation group, two (8%) patients had grade 1 pivot shift and 2 (8%) patients had grade 2 pivot shift. Among patients in suture fixation group, five (22%) patients had grade 1 pivot shift, three (13%) patients had grade 2 pivot shift, and 1 (9%) patient had grade 3 pivot shift (p = 0.037). CONCLUSIONS: Significant better IKDC objective evaluation, lower glide pivot shift phenomenon, and shorter operating time requirement in screw fixation group with respect to suture fixation group were shown in our study although the other functional knee scores (Lysholm score, Tegner activity level, and the IKDC subjective score) and KT-1000 manual side-to-side difference only revealed a trend with better clinical results in screw fixation group than in suture fixation group rather than significant difference.