RESUMEN
Hydrogen production through water splitting is a vital strategy for renewable and sustainable clean energy. In this study, we developed an approach integrating nanomaterial engineering and synthetic biology to establish a bionanoreactor system for efficient hydrogen production. The periplasmic space (20 to 30 nm) of an electroactive bacterium, Shewanella oneidensis MR-1, was engineered to serve as a bionanoreactor to enhance the interaction between electrons and protons, catalyzed by hydrogenases for hydrogen generation. To optimize electron transfer, we used the microbially reduced graphene oxide (rGO) to coat the electrode, which improved the electron transfer from the electrode to the cells. Native MtrCAB protein complex on S. oneidensis and self-assembled iron sulfide (FeS) nanoparticles acted in tandem to facilitate electron transfer from an electrode to the periplasm. To enhance proton transport, S. oneidensis MR-1 was engineered to express Gloeobacter rhodopsin (GR) and the light-harvesting antenna canthaxanthin. This led to efficient proton pumping when exposed to light, resulting in a 35.6% increase in the rate of hydrogen production. The overexpression of native [FeFe]-hydrogenase further improved the hydrogen production rate by 56.8%. The bionanoreactor engineered in S. oneidensis MR-1 achieved a hydrogen yield of 80.4 µmol/mg protein/day with a Faraday efficiency of 80% at a potential of -0.75 V. This periplasmic bionanoreactor combines the strengths of both nanomaterial and biological components, providing an efficient approach for microbial electrosynthesis.
Asunto(s)
Grafito , Hidrógeno , Shewanella , Hidrógeno/metabolismo , Shewanella/metabolismo , Shewanella/genética , Grafito/metabolismo , Hidrogenasas/metabolismo , Hidrogenasas/genética , Transporte de Electrón , Reactores Biológicos , Biología Sintética/métodos , Electrodos , Rodopsinas Microbianas/metabolismo , Rodopsinas Microbianas/genética , Periplasma/metabolismo , Fuentes de Energía Bioeléctrica/microbiologíaRESUMEN
Photocatalytic hydrogen production is a prevalent method for hydrogen synthesis. However, high recombination rate of photogenerated carriers and high activation energy barrier of H remain persistent challenge. Here, the two-step hydrothermal method is utilized to prepare dual S-defect mediated catalyst molybdenum sulfide/zinc indium sulfide (MSv/ZISv), which has high hydrogen production rate of 8.83 mmol g-1h-1 under simulated sunlight. The achieved rate is 21.91 times higher than pure ZnIn2S4 substrate. Defects in ZIS within MSv/ZISv modify the primitive electronic structure by creating defect state that retaining good reducing power, leading to the rapid separation of electron-hole pairs and the generation of additional photogenerated carriers. The internal electric field further enhances the migration toward to cocatalyst. Simultaneously, the defects introduced on the MoS2 cause electron rearrangement, leading to electron clustering on both S vacancies and edge S. Thereby MSv/ZISv exhibits the lowest activation energy barrier and |ΔGH*|. This work explores the division of synergies between different types of S defects, providing new insights into the coupling of defect engineering.
RESUMEN
Designing materials with low exciton binding energy is an efficient way of improving the hydrogen production performance of COFsï¼Covalent Organic Frameworks. Here, it is demonstrated that the strategy of decorating bromine atoms on Pyene-based COFs can achieve elevated photocatalytic H2 evolution rates (HER = 13.61 mmol g-1h-1). Low-temperature fluorescence and time-resolved fluorescence spectroscopy (TRPL) indicate that the introduction of bromine atoms can significantly suppress charge recombination. DFT (Density Functional Theory) calculation clarified that the C atoms adjacent to Br are the active sites with a reduced energy barrier in the process of formatting H intermediate species (H*). The modification strategy of Br atoms in COF furnishes a new medium for exploiting exquisite photocatalysts.
RESUMEN
The utilization of low-energy sunlight to produce renewable fuels is a subject of great interest. Here we report the first example of metal chalcogenide quantum dots (QDs) capped with a pyridinethiolate carboxylic acid (pyS-COOH) for red-light-driven H2 production in water. The precious-metal-free system is robust over 240â h, and achieves a turnover number (TON) of 43910±305 (vs Ni) with a rate of 31570±1690â µmol g-1 h-1 for hydrogen production. In contrast to the inactive QDs capped with other thiolate ligands, the CdSe-pyS-COOH QDs give a significantly higher singlet oxygen quantum yield [ΦΔ (1O2)] in solution.
RESUMEN
Photocatalytic generation of H2 via water splitting emerges as a promising avenue for the next generation of green hydrogen due to its low carbon footprint. Herein, a versatile platform is designed to the preparation of functional π-conjugated organic nanoparticles dispersed in aqueous phase via mini-emulsification. Such particles are composed of donor-acceptor-donor (DAD) trimers prepared via Stille coupling, stabilized by amphiphilic block copolymers synthesized by reversible addition-fragmentation chain transfer polymerization. The hydrophilic segment of the block copolymers will not only provide colloidal stability, but also allow for precise control over the surface functionalization. Photocatalytic tests of the resulting particles for H2 production resulted in promising photocatalytic activity (≈0.6 mmol g-1 h-1). This activity is much enhanced compared to that of DAD trimers dispersed in the water phase without stabilization by the block copolymers.
RESUMEN
The conversion of carbon dioxide (CO2) to methane (CH4) is a strategy for sequestering CO2. Zero-valent iron (ZVI) has been proposed as an alternative electron donor for the CO2 reduction to CH4. In this study, the effects of ZVI concentrations on the abiotic production of H2 (without the action of microorganisms) in the first part and on the biological conversion of CO2 to CH4 using ZVI as a direct electron donor in the second part were examined. In the abiotic H2 production, the increase in the ZVI concentration from 16 to 32, 64, and 96 g/L was found to have positive effects on both the amounts of H2 generated and the rates of H2 production because the extent of ZVI oxidation positively correlates with increasing surface area. Nevertheless, the increase in ZVI concentration from 96 to 224 g/L did not benefit the H2 production because the ZVI dissolution was suppressed by the increasing aqueous pH above 10. In the bioconversion of CO2 to CH4 using ZVI as an electron donor, the main methanogenesis pathway occurred via hydrogenotrophic methanogenesis at pH 8.7-9.5 driven by the genus Methanobacterium of the class Methanobacteria. At ZVI concentrations of 64 g/L and above, the production of volatile fatty acid (VFA) became clear. Acetate was the main VFA, indicating the induction of homoacetogenesis at ZVI concentrations of 64 g/L and above. In addition, the presence of propionate as the second major VFA suggests the production of propionate from CO2 and acetate under conditions with high H2 partial pressure. The results indicated that the pathway for ZVI/CO2 conversion to CH4 was competitive between hydrogenotrophic methanogenesis and homoacetogenesis.
Asunto(s)
Dióxido de Carbono , Hidrógeno , Hierro , Metano , Metano/metabolismo , Dióxido de Carbono/metabolismo , Anaerobiosis , Hierro/metabolismo , Hidrógeno/metabolismoRESUMEN
Conjugated polymers have attracted significant attention in the field of photocatalysis due to their exceptional properties, including versatile optimization, cost-effectiveness, and structure stability. Herein, two conjugated porous polymers, PhIN-CPP and ThIN-CPP, based on triazines, were meticulously designed and successfully synthesized using benzene and thiophene as building blocks. Based on UV diffuse reflection spectra, the photonic band gaps of PhIN-CPP and ThIN-CPP were calculated as 2.05 eV and 1.79 eV. The PhIN-CPP exhibited a high hydrogen evolution rate (HER) of 5359.92 µmol·g-1·h-1, which is 10 times higher than that of Thin-CPP (538.49 µmol·g-1·h-1). The remarkable disparity in the photocatalytic performance can be primarily ascribed to alterations in the band structure of the polymers, which includes its more stable benzene units, fluffier structure, larger specific surface area, most pronounced absorption occurring in the visible region and highly extended conjugation with a high density of electrons. The ΔEST values for PhIN-CPP and ThIN-CPP were calculated as 0.79 eV and 0.80 eV, respectively, based on DFT and TD-DFT calculations, which revealed that the incorporation of triazine units in the as-prepared CMPs could enhance the charge transfer via S1 â T1 and was beneficial to the photocatalytic decomposition of H2O. This study presents a novel concept for developing a hybrid system for preparation of H2 by photocatalysis with effectiveness, sustainability, and economy.
RESUMEN
The integration of clean energy generation with wastewater treatment holds promise for addressing both environmental and energy concerns. Focusing on photocatalytic hydrogen production and wastewater treatment, this study introduces PdIn/TiO2 catalysts for the simultaneous removal of the pharmaceutical contaminant paracetamol (PTM) and hydrogen production. Physicochemical characterization showed a high distribution of Pd and In on the support as well as a high interaction with it. The Pd and In deposition enhance the light absorption capability and significantly improve the hydrogen evolution reaction (HER) in the absence and presence of paracetamol compared to TiO2. On the other hand, the photoelectroxidation of PTM at TiO2 and PdIn/TiO2 follows the full mineralization path and, accordingly, is limited by the adsorption of intermediate species on the electrode surface. Thus, PdIn-doped TiO2 stands out as a promising photoelectrocatalyst, showcasing enhanced physicochemical properties and superior photoelectrocatalytic performance. This underscores its potential for both environmental remediation and sustainable hydrogen production.
RESUMEN
The recombination of photogenerated charge carriers severely limits the performance of photoelectrochemical (PEC) H2 production. Here, we demonstrate that this limitation can be overcome by optimizing the charge transfer dynamics at the solid-liquid interface via molecular catalyst design. Specifically, the surface of a p-Si photocathode is modulated using molecular catalysts with different metal atoms and organic ligands to improve H2 production performance. Co(pda-SO3H)2 is identified as an efficient and durable catalyst for H2 production through the rational design of metal centers and first/second coordination spheres. The modulation with Co(pda-SO3H)2, which contains an electron-withdrawing -SO3H group in the second coordination sphere, elevates the flat-band potential of the polished p-Si photocathode and nanoporous p-Si photocathode by 81â mV and 124â mV, respectively, leading to the maximized energy band bending and the minimized interfacial carrier transport resistance. Consequently, both the two photocathodes achieve the Faradaic efficiency of more than 95 % for H2 production, which is well maintained during 18â h and 21â h reaction, respectively. This work highlights that the band-edge engineering by molecular catalysts could be an important design consideration for semiconductor-catalyst hybrids toward PEC H2 production.
RESUMEN
Light-driven hydrogen production from biomass derivatives offers a path towards carbon neutrality. It is often however operated with the limitations of sluggish kinetics and severe coking. Herein, a disruptive air-promoted strategy is explored for efficient and durable light-driven hydrogen production from ethanol over a core/shell Cr2O3@GaN nanoarchitecture. The correlative computational and experimental investigations show ethanol is energetically favorable to be adsorbed on the Cr2O3@GaN interface, followed by dehydrogenation toward acetaldehyde and protons by photoexcited holes. The released protons are then consumed for H2 evolution by photogenerated electrons. Afterward, O2 can be evolved into active oxygen species and promote the deprotonation and C-C cleavage of the key C2 intermediate, thus significantly lowering the reaction energy barrier of hydrogen evolution and removing the carbon residual with inhibited overoxidation. Consequently, hydrogen is produced at a high rate of 76.9â mole H2 per gram Cr2O3@GaN per hour by only feeding ethanol, air, and light, leading to the achievement of a turnover number of 266,943,000â mole H2 per mole Cr2O3 over a long-term operation of 180â hours. Notably, an unprecedented light-to-hydrogen efficiency of 17.6 % is achieved under concentrated light illumination. The simultaneous generation of aldehyde from ethanol dehydrogenation enables the process more economically promising.
RESUMEN
In photocatalysis, reducing the exciton binding energy and boosting the conversion of excitons into free charge carriers are vital to enhance photocatalytic activity. This work presents a facile strategy of engineering Pt single atoms on a 2D hydrazone-based covalent organic framework (TCOF) to promote H2 production coupled with selective oxidation of benzylamine. The optimised TCOF-Pt SA photocatalyst with 3 wt% Pt single atom exhibited superior performance to TCOF and TCOF-supported Pt nanoparticle catalysts. The production rates of H2 and N-benzylidenebenzylamine over TCOF-Pt SA3 are 12.6 and 10.9 times higher than those over TCOF, respectively. Empirical characterisation and theoretical simulation showed that the atomically dispersed Pt is stabilised on the TCOF support through the coordinated N1 -Pt-C2 sites, thereby induing the local polarization and improving the dielectric constant to reach the low exciton binding energy. These phenomena led to the promotion of exciton dissociation into electrons and holes and the acceleration of the separation and transport of photoexcited charge carriers from bulk to the surface. This work provides new insights into the regulation of exciton effect for the design of advanced polymer photocatalysts.
RESUMEN
In recent years, photocatalysis has received increasing attention in alleviating energy scarcity and environmental treatment, and graphite carbon nitride (g-C3 N4 ) is used as an ideal photocatalyst. However, it still remains numerous challenges to obtain the desirable photocatalytic performance of intrinsic g-C3 N4 . Functional group functionalization, formed by introducing functional groups into the bulk structure, is one of the common modification techniques to modulate the carrier dynamics and increases the number of active sites, offering new opportunities to break the limits for structure-to-performance relationship of g-C3 N4 . Nevertheless, the general overview of the advance of functional group modification of g-C3 N4 is less reported yet. In order to better understand the structure-to-performance relationship at the molecular level, a review of the latest development of functional group modification is urgently needed. In this review, the functional group modification of g-C3 N4 in terms of structures, properties, and photocatalytic activity is mainly focused, as well as their mechanism of reaction from the molecular level insights is explained. Second, the recent progress of the application of introducing functional groups in g-C3 N4 is introduced and examples are given. Finally, the difficulties and challenges are presented, and based on this, an outlook on the future research development direction is shown.
RESUMEN
The development of potent H2 production catalysts is a key aspect in our journey toward the establishment of a sustainable carbon-neutral power infrastructure. Hydrogenase enzymes provide the blueprint for designing efficient catalysts by the rational combination of central metal core and protein scaffold-based outer coordination sphere (OCS). Traditionally, a biomimetic catalyst is crafted by including natural amino acids as OCS features around a synthetic metal motif to functionally imitate the metalloenzyme activity. Here, we have pursued an unconventional approach and implanted two distinct drug molecules (isoniazid and nicotine hydrazide) at the axial position of a cobalt core to create a new genre of synthetic catalysts. The resultant cobalt complexes are active for both electrocatalytic and photocatalytic H2 production in near-neutral water, where they significantly enhance the catalytic performance of the unfunctionalized parent cobalt complex. The drug molecules showcased a dual effect as they influence the catalytic HER by improving the surrounding proton relay along and exerting subtle electronic effects. The isoniazid-ligated catalyst C1 outperformed the nicotine hydrazide-bound complex C2, as it produced H2 from water (pHâ 6.0) at a rate of 3960â s-1 while exhibiting Faradaic efficiency of about 90 %. This strategy opens up newer avenues of bio-inspired catalyst design beyond amino acid-based OCS features.
Asunto(s)
Hidrógeno , Isoniazida , Hidrógeno/química , Protones , Aminoácidos/química , Metales , Cobalto/química , AguaRESUMEN
2D layered photocatalysts with proper electronic structure have sparked much attention in the field of visible-light photocatalysis for H2production. Herein, by simply calcining the mixture of ultrathin g-C3N4(CNN) and NaBH4, heteroatom B and N defect were simultaneously introduced into g-C3N4. The obtained modified g-C3N4(BDCNN) was further coupled with 2D flower-like CdS nanosheet. The optimal 2D/2D BDCNN/CdS-15% heterojunction behaved ideal photocatalytic activity for H2revolution by water splitting, and the highest H2revolution rate was as high as 1013.8µmol g-1h-1, which was 6.7 times, 2 times, and 5.8 times of the corresponding values of pristine CNN, BDCNN and CdS respectively. It was evidenced that the band structure of 2D/2D BDCNN/CdS-15% was well tuned for better visible-light adsorption and higher separation efficiency of photo-induced carriers for enhancing H2revolution performance. The achievement in this study provided informative principles for exploring g-C3N4based heterojunctions with higher H2-production performance.
RESUMEN
In this study, we present a facile wet chemical method for synthesizing Ni-modified polymeric carbon nitride (g-C3N4) nanosheets. X-ray absorption fine structure spectroscopy reveals the formation of a unique Ni-N structure, resulting from Ni atoms anchoring in cavities of g-C3N4. The Ni anchoring on the surface N sites modifies the electronic structure of g-C3N4, demonstrating remarkable effectiveness even at low anchoring amounts. The as-prepared Ni/g-C3N4catalysts show robust performance for photocatalytic hydrogen evolution under visible light irradiation, attributed to the unique Ni-N interactions. Specifically, the photocatalytic H2production rate of the Ni/CN-45 catalyst reached 8482.14µmol·g-1·h-1with an apparent quantum efficiency of 0.75% under light irradiation at 427 nm. This rate surpasses most of the previously reported g-C3N4based photocatalysts and is nearly 8 times higher than that of the pure g-C3N4catalyst (1116.07µmol·g-1·h-1).
Asunto(s)
Electrónica , Hidrógeno , Luz , Polímeros , Espectroscopía de Absorción de Rayos XRESUMEN
Hydrogen production, catalytic organic synthesis, carbon dioxide reduction, environmental purification, and other major fields have all adopted photocatalytic technologies due to their eco-friendliness, ease of use, and reliance on sunlight as the driving force. Photocatalyst is the key component of photocatalytic technology. Thus, it is of utmost importance to produce highly efficient, stable, visible-light-responsive photocatalysts. CIS stands out among other visible-light-response photocatalysts for its advantageous combination of easy synthesis, non-toxicity, high stability, and suitable band structure. In this study, we took a brief glance at the synthesis techniques for CIS after providing a quick introduction to the fundamental semiconductor features, including the crystal and band structures of CIS. Then, we discussed the ways doping, heterojunction creation, p-n heterojunction, type-II heterojunction, and Z-scheme may be used to modify CIS's performance. Subsequently, the applications of CIS towards pollutant degradation, CO2 reduction, water splitting, and other toxic pollutants remediation are reviewed in detail. Finally, several remaining problems with CIS-based photocatalysts are highlighted, along with future potential for constructing more superior photocatalysts.
Asunto(s)
Contaminantes Ambientales , Restauración y Remediación Ambiental , Catálisis , Luz , TecnologíaRESUMEN
Side streams of the dairy industry are a suitable nutrient source for cultivating microorganisms, producing enzymes, and high-value chemical compounds. The heterotrophic Escherichia coli and chemolithoautotroph Ralstonia eutropha are of major biotechnological interest. R. eutropha is a model organism for producing O2-tolerant [NiFe]-hydrogenases (Hyds) (biocatalysts), and E. coli has found widespread use as an expression platform for producing recombinant proteins, molecular hydrogen (H2), and other valuable products. Aiming at developing suitable cultivation media from side streams of the dairy industry, the pre-treatment (filtration, dilution, and pH adjustment) of cheese (sweet) whey (SW) and curd (acid) whey (AW), with and without the use of ß-glucosidase, has been performed. Growth parameters (oxidation-reduction potential (ORP), pH changes, specific growth rate, biomass formation) of E. coli BW25113 and R. eutropha H16 type strains were monitored during cultivation on filtered and non-filtered SW and AW at 37 °C, pH 7.5 and 30 °C, pH 7.0, respectively. Along with microbial growth, measurements of pH and ORP indicated good fermentative growth. Compared to growth on fructose-nitrogen minimal salt medium (control), a maximum cell yield (OD600 4.0) and H2-oxidizing Hyd activity were achieved in the stationary growth phase for R. eutropha. Hyd-3-dependent H2 production by E. coli utilizing whey as a growth substrate was demonstrated. Moreover, good biomass production and prolonged H2 yields of ~ 5 mmol/L and cumulative H2 ~ 94 mL g/L dry whey (DW) (ß-glucosidase-treated) were observed during the cultivation of the engineered E. coli strain. These results open new avenues for effective whey treatment using thermostable ß-glucosidase and confirm whey as an economically viable commodity for biomass and biocatalyst production. KEY POINTS: ⢠Archaeal thermostable ß-glucosidase isolated from the metagenome of a hydrothermal spring was used for lactose hydrolysis in whey. ⢠Hydrogenase enzyme activity was induced during the growth of Ralstonia eutropha H16 on whey. ⢠Enhanced biomass and H2 production was shown in a genetically modified strain of Escherichia coli.
Asunto(s)
Celulasas , Cupriavidus necator , Hidrogenasas , Suero Lácteo/metabolismo , Escherichia coli/metabolismo , Hidrogenasas/genética , Hidrogenasas/metabolismo , Biomasa , Proteína de Suero de Leche/metabolismo , Hidrógeno/metabolismo , Celulasas/metabolismoRESUMEN
Photogeneration of charge carriers in semiconductors provides the scientific fundamental for photocatalytic water splitting. However, an ongoing challenge is the development of a new mechanism promoting charge carrier separation. Here we propose a trap-state-induced interfacial charge-transfer transition mechanism (TSICTT), in which electrons in long-lived trap states recombine with holes on the valence band (VB) of the semiconductor, thus prolonging the electron lifetime. We demonstrate this concept in the Sr4Al14O25:Eu2+, Dy3+/CdS (SAO/CdS) heterostructure, where trapped electrons with a lifetime of up to several hours in the SAO persistent luminescence phosphor (PLP) can continuously consume holes on the VB of CdS nanoparticles (NPs). We discover that the interfacial interaction and the work function difference between SAO and CdS are crucial for the TSICTT, which finally contributes to the improved H2 production from 34.4 to 1212.9 µmol gCdS-1 h-1 under visible-light irradiation. This model introduces a new strategy to manipulate charge carrier transport for the effective utilization of solar energy.
RESUMEN
Highly ordered TiO2 nanotube (NT) arrays grown on Ti mesh and Ti foil were successfully prepared by a controlled anodic oxidation process and tested for water photo-electrolysis. Electrochemical impedance spectroscopy (EIS), combined with other electrochemical techniques (cyclic voltammetry and chronoamperometry) in tests performed in the dark and under illumination conditions, was used to correlate the photoactivity to the specific charge transfer resistances associated with a 3D (mesh) or 2D (foil) geometry of the support. The peculiar structure of the nanotubes in the mesh (with better light absorption and faster electron transport along the nanotubes) strongly impacts the catalytic performances under illumination. H2 production and current density in water photo-electrolysis were over three times higher with the TiO2NTs/Ti mesh, compared to the foil in the same conditions. The results obtained by the EIS technique, used here for the first time to directly compare TiO2 nanotubes on two different supports (Ti foil and Ti mesh), led to a better understanding of the electronic properties of TiO2 nanotubes and the effect of a specific support on its photocatalytic properties.
RESUMEN
Herein, a novel direct Z-scheme photocatalyst was accomplished by hybridization of 0D MoS2 quantum dots (MSQDs) and 3D honeycomb-like conjugated triazine polymers (CTP) (namely, CTP-MSQD). The unique 0D/3D hierarchical structure significantly enhanced the exposure of active sites and light harvesting property, while the formed p-n junction enabled the direct strong interface coupling without the necessity of any mediators. The optimized CTP-MSQD3 exhibited continuously increased visible-light-driven photocatalytic activity and strong durability both in Cr(VI) reduction and H2 evolution, featured a rate of 0.069 min-1 and 1070 µmol/(hrâg), respectively, which were 8 times than those of pure 3D-CTP (0.009 min-1 and 129 µmol/(hrâg)). We believe that this work provides a promising photocatalyst system that combines a 0D/3D hierarchical structure and a Z-scheme charge flow for efficient and stable photocatalytic conversion.