Ion Resource Recovery via Electrodialysis Fabricated with Poly(Arylene Ether Sulfone)-Based Anion Exchange Membrane in Organic Solvent System.

Ion resource recovery from organic wastewater is beneficial for achieving emission peaks and carbon neutrality targets. Advanced organic solvent-resistant anion exchange membranes (AEMs) for treating organic wastewater via electrodialysis (ED) are of significant interest. Herein, a kind of 3D network AEM based on poly(arylene ether sulfone) cross-linked with a flexible cross-linker (DBH) for ion resource recovery via ED in organic solvent system is reported. Investigations demonstrate that the as-prepared AEMs show excellent dimensional stability in 60% DMSO (aq.), 60% ethanol (aq.), and 60% acetone (aq.), respectively. For example, the optimized AEM shows very low swelling ratios of 1.04-1.10% in the organic solvents. ED desalination ratio can reach 99.1% after exposure of the AEM to organic solvents for 30 days, and remain > 99% in a mixture solution containing organic solvents and 0.5 m NaCl. Additionally, at a current density of 2.5 mA cm-2, the optimized AEM soaked in organic solvents for 30 days shows a high perm-selectivity (Cl-/SO4 2-) of 133.09 (vs 13.11, Neosepta ACS). The superior ED performance is attributed to the stable continuous sub-nanochannels within AEM confirmed by SAXS, rotational energy barriers, etc. This work shows the potential application of cross-linked AEMs for resource recovery in organic wastewater.

Methylosinus trichosporium OB3b bioaugmentation unleashes polyhydroxybutyrate-accumulating potential in waste-activated sludge.

BACKGROUND: Wastewater treatment plants contribute approximately 6% of anthropogenic methane emissions. Methanotrophs, capable of converting methane into polyhydroxybutyrate (PHB), offer a promising solution for utilizing methane as a carbon source, using activated sludge as a seed culture for PHB production. However, maintaining and enriching PHB-accumulating methanotrophic communities poses challenges. RESULTS: This study investigated the potential of Methylosinus trichosporium OB3b to bioaugment PHB-accumulating methanotrophic consortium within activated sludge to enhance PHB production. Waste-activated sludges with varying ratios of M. trichosporium OB3b (1:0, 1:1, 1:4, and 0:1) were cultivated. The results revealed substantial growth and methane consumption in waste-activated sludge with M. trichosporium OB3b-amended cultures, particularly in a 1:1 ratio. Enhanced PHB accumulation, reaching 37.1% in the same ratio culture, indicates the dominance of Type II methanotrophs. Quantification of methanotrophs by digital polymerase chain reaction showed gradual increases in Type II methanotrophs, correlating with increased PHB production. However, while initial bioaugmentation of M. trichosporium OB3b was observed, its presence decreased in subsequent cycles, indicating the dominance of other Type II methanotrophs. Microbial community analysis highlighted the successful enrichment of Type II methanotrophs-dominated cultures due to the addition of M. trichosporium OB3b, outcompeting Type I methanotrophs. Methylocystis and Methylophilus spp. were the most abundant in M. trichosporium OB3b-amended cultures. CONCLUSIONS: Bioaugmentation strategies, leveraging M. trichosporium OB3b could significantly enhance PHB production and foster the enrichment of PHB-accumulating methanotrophs in activated sludge. These findings contribute to integrating PHB production in wastewater treatment plants, providing a sustainable solution for resource recovery.

MXene-Coated Ion-Selective Electrode Sensors for Highly Stable and Selective Lithium Dynamics Monitoring.

Lithium holds immense significance in propelling sustainable energy and environmental systems forward. However, existing sensors used for lithium monitoring encounter issues concerning their selectivity and long-term durability. Addressing these challenges is crucial to ensure accurate and reliable lithium measurements during the lithium recovery processes. In response to these concerns, this study proposes a novel approach involving the use of an MXene composite membrane with incorporated poly(sodium 4-styrenesulfonate) (PSS) as an antibiofouling layer on the Li+ ion selective electrode (ISE) sensors. The resulting MXene-PSS Li+ ISE sensor demonstrates exceptional electrochemical performance, showcasing a superior slope (59.42 mV/dec), lower detection limit (10-7.2 M), quicker response time (∼10 s), higher selectivity to Na+ (-2.37) and K+ (-2.54), and reduced impedance (106.9 kΩ) when compared to conventional Li+ ISE sensors. These improvements are attributed to the unique electronic conductivity and layered structure of the MXene-PSS nanosheet coating layer. In addition, the study exhibits the long-term accuracy and durability of the MXene-PSS Li+ ISE sensor by subjecting it to real wastewater testing for 14 days, resulting in sensor reading errors of less than 10% when compared to laboratory validation results. This research highlights the great potential of MXene nanosheet coatings in advancing sensor technology, particularly in challenging applications, such as detecting emerging contaminants and developing implantable biosensors. The findings offer promising prospects for future advancements in sensor technology, particularly in the context of sustainable energy and environmental monitoring.

Electrochemical Reduction of Flue Gas Denitrification Wastewater to Ammonia Using a Dual-Defective Cu2O@Cu Heterojunction Electrode.

Wet flue gas denitrification offers a new route to convert industrial nitrogen oxides (NOx) into highly concentrated nitrate wastewater, from which the nitrogen resource can be recovered to ammonia (NH3) via electrochemical nitrate reduction reactions (NITRRs). Low-cost, scalable, and efficient cathodic materials need to be developed to enhance the NH3 production rate. Here, in situ electrodeposition was adopted to fabricate a foamy Cu-based heterojunction electrode containing both Cu-defects and oxygen vacancy loaded Cu2O (OVs-Cu2O), which achieved an NH3 yield rate of 3.59 mmol h-1 cm-2, NH3 Faradaic efficiency of 99.5%, and NH3 selectivity of 100%. Characterizations and theoretical calculations unveiled that the Cu-defects and OVs-Cu2O heterojunction boosted the H* yield, suppressed the hydrogen evolution reaction (HER), and served as dual reaction sites to coherently match the tandem reactions kinetics of NO3-to-NO2 and NO2-to-NH3. An integrated system was further built to combine wet flue gas denitrification and desulfurization, simultaneously converting NO and SO2 to produce the (NH4)2SO4 fertilizer. This study offers new insights into the application of low-cost Cu-based cathode for electrochemically driven wet denitrification wastewater valorization.

Critical Review of Pd-Catalyzed Reduction Process for Treatment of Waterborne Pollutants.

Catalyzed reduction processes have been recognized as important and supplementary technologies for water treatment, with the specific aims of resource recovery, enhancement of bio/chemical-treatability of persistent organic pollutants, and safe handling of oxygenate ions. Palladium (Pd) has been widely used as a catalyst/electrocatalyst in these reduction processes. However, due to the limited reserves and high cost of Pd, it is essential to gain a better understanding of the Pd-catalyzed decontamination process to design affordable and sustainable Pd catalysts. This review provides a systematic summary of recent advances in understanding Pd-catalyzed reductive decontamination processes and designing Pd-based nanocatalysts for the reductive treatment of water-borne pollutants, with special focus on the interactions and transformation mechanisms of pollutant molecules on Pd catalysts at the atomic scale. The discussion begins by examining the adsorption of pollutants onto Pd sites from a thermodynamic viewpoint. This is followed by an explanation of the molecular-level reaction mechanism, demonstrating how electron-donors participate in the reductive transformation of pollutants. Next, the influence of the Pd reactive site structure on catalytic performance is explored. Additionally, the process of Pd-catalyzed reduction in facilitating the oxidation of pollutants is briefly discussed. The longevity of Pd catalysts, a crucial factor in determining their practicality, is also examined. Finally, we argue for increased attention to mechanism study, as well as precise construction of Pd sites under batch synthesis conditions, and the use of Pd-based catalysts/electrocatalysts in the treatment of concentrated pollutants to facilitate resource recovery.

Characterizing the Opportunity Space for Sustainable Hydrothermal Valorization of Wet Organic Wastes.

Resource recovery from wet organic wastes can support circular economies by creating financial incentives to produce renewable energy and return nutrients to agriculture. In this study, we characterize the potential for hydrothermal liquefaction (HTL)-based resource recovery systems to advance the economic and environmental sustainability of wastewater sludge, FOG (fats, oils, and grease), food waste, green waste, and animal manure management through the production of liquid biofuels (naphtha, diesel), fertilizers (struvite, ammonium sulfate), and power (heat, electricity). From the waste management perspective, median costs range from -193 $·tonne-1 (FOG) to 251 $·tonne-1 (green waste), and median carbon intensities range from 367 kg CO2 eq·tonne-1 (wastewater sludge) to 769 kg CO2 eq·tonne-1 (green waste). From the fuel production perspective, the minimum selling price of renewable diesel blendstocks are within the commercial diesel price range (2.37 to 5.81 $·gal-1) and have a lower carbon intensity than petroleum diesel (101 kg CO2 eq·MMBTU-1). Finally, through uncertainty analysis and Monte Carlo filtering, we set specific targets (i.e., achieve wastewater sludge-to-biocrude yield >0.440) for the future development of hydrothermal waste management system components. Overall, our work demonstrates the potential of HTL-based resource recovery systems to reduce the costs and carbon intensity of resource-rich organic wastes.

Soluble carbon source recovery using preconditioning coagulants for applicable short-term fermentation of waste activated sludge in WWTPs.

A huge production of waste activated sludge (WAS) has been a burden for wastewater treatment plants (WWTPs) with high disposal cost and little benefit back to wastewater purification. The short-chain fatty acids (SCFAs) produced by a short-term acidogenic fermentation of WAS before methane production have been proven to be a high-quality carbon source available for microbial denitrification process. The dual purpose of full recovery of fermentation liquid products and facilitating disposal of residual solid waste necessitate an efficient solid-liquid separation process of short-term fermentation liquid. The transformation and loss of various soluble carbon sources between solid and liquid are very important issues for carbon recovery efficiency when combining short-term fermentation and sludge dewatering in WWTPs. Here we testified the three conventional preconditioning coagulants, Polyferric Sulfate (PFS), Poly Aluminum Chloride (PAC) and Polyacrylamide (PAM), to improve the efficiency of subsequent solid-liquid separation. The results show that conversion yield of SCFAs in the liquid phase of sludge after short-term fermentation was 195 mg COD/g VSS, when using the coagulants PFS, PAC, and PAM for recovery, the recovery ratio was 79.5%, 82.0%, and 85.9%, respectively, while the dewaterability could be improved after preconditioning short-term fermentation sludge. The complexation of Al3+/Fe3+ in metal coagulants with carboxyl groups of SCFA demonstrated by Density Functional Theory calculation led to small part of soluble carbons co-migration to the solid phase, mainly a loss of high molecular weight organic compounds (carbohydrate, proteins, humic acids), while the application of PAM had little impact on carbon recovery. Economic calculations further showed PAM preconditioning short-term fermentation liquid of WAS could achieve higher recovery benefits.

Empirical analysis of cost-effective and equitable solid waste management systems: Environmental and economic perspectives.

The solid waste management (SWM) system is in a transitional phase in developing economies, and local municipalities and waste management companies are stepping toward integrating a waste treatment approach in the scheme of waste handling. However, there is an urgent need to explore cost-effective techniques, models, and potential revenue streams to sustain the state-run waste sector self-sufficiently. The proposed SWM model aims to support the local waste sector in Islamabad, the capital city of Pakistan, with 100% service area coverage to attain environmental and economic sustainability by defining dedicated waste collection streams to ensure quality material recovery under a cost-effective approach and modality. The innovative approach is applied to allocate the tonnage to various streams as per the city's current land use plan. The estimated/cost of the cleanliness services will be USD13.1 million per annum with an estimated per ton cost of USD 23. The establishment of the proposed material recovery facility (MRF) will process about 500 t/d of waste to produce 45 t/d compost and recover 130 t/d of recyclables. The environmentally friendly model saves 2.4 million tons of CO2‒eq/month from composting and recycling. The average economic potential from MRF and debris-crushing plants, including environmental benefit value, is calculated as USD 3.97 million annually. Recovery of services fee (70%) for various collection streams based on city land use and socio-economic conditions will generate revenue of USD 7.33 million annually. The total revenue will be USD 11.31 million (86% of total annual expenditures) to track the sector's self-sufficiency. To successfully reach the Sustainable Development Goals (SDGs) and Nationally Determined Contributions (NDCs), engaging the private sector from environmentally advanced economies to collaborate in the waste sector to enhance local technical capabilities is recommended.

Efficient PAHs removal and CO2 fixation by marine microalgae in wastewater using an airlift photobioreactor for biofuel production.

Microalgae cultures have emerged as a promising strategy in diverse areas, ranging from wastewater treatment to biofuel production, thus contributing to the search for carbon neutrality. These photosynthetic organisms can utilize the resources present in wastewater and fix atmospheric CO2 to produce biomass with high energy potential. In this study, the removal efficiency of Polycyclic Aromatic Hydrocarbons (PAHs), CO2 fixation and lipid content in the biomass produced from microalgae grown in airlift photobioreactor were evaluated. Four mesoscale cultures were carried out: Control (Seawater + Conway medium), Treatment A (Oil Produced Water + Poultry Effluent Water), Treatment B (Poultry Effluent Water + Seawater) and Treatment C (Oil Produced Water, Seawater and nutrients). The impact of biostimulation, through the addition of nutrients, on PAHs removal efficiency (up to 90%), CO2 fixation rate (up to 0.20 g L-1 d-1) and the composition of the generated biomass was observed. Primarily, the addition of nitrates to the culture medium impacted CO2 fixation rate of the microalgae. In addition, a direct correlation was observed between PAHs removal and lipid accumulation in the biomass, up to 36% in dry weight, demonstrating microalgae's ability to take advantage of the organic carbon (PAHs) present in the culture medium to generate lipid-rich biomass. The concentration of polysaccharides in the biomass obtained did not exceed 12% on a dry weight basis, and the Higher Heating Value (HHV) ranged between 17 and 21 MJ kg-1. Finally, the potential of generating hydrogen through pyrolysis was highlighted, taking advantage of the characteristics of biomass as a conversion route to produce biofuels. These results show that microalgae are effective in wastewater treatment and have great potential in producing biofuels, thus contributing to the transition towards more sustainable energy sources and climate change mitigation.

Ultrahigh-purity ammonia recovery from synthetic coke wastewater via membrane contactor: Overcoming phenolic interference and assessing cost efficiency.

Ammonia recovery from industrial wastewater using membrane contactor processes is emerging as a promising method owing to the diverse applications of ammonia. This study uniquely addressed ammonia recovery from coke plant wastewater, which is challenging due to the presence of numerous toxic and volatile phenolic compounds. Experiments were conducted using a synthetic coke plant effluent to assess the effects of various pH levels and temperatures on ammonia recovery. Specifically, the aim was to achieve high-purity ammonia recovery while minimizing the permeation of phenolic compounds. The results demonstrate that ammonia recovery in the membrane contactor processes is highly efficient, even in the presence of phenolic compounds. During temperature variations at 25 °C and 40 °C, the recovery of ammonia increased from 42.36% to 52.97% at pH 11. Additionally, increasing the pH of a feed solution from 7 to 12 significantly increased the ammonia content to 58.3%. At this pH, the recovered ammonia was of exceptional purity (>99%), with phenol, p-Cresol, and 2,4-xylenol present at negligible concentrations (0.001%, 0.002%, and 0.004%, respectively). This was attributed to the ionization of phenolic compounds at higher pH levels, which prevents their permeation through the hydrophobic membrane. The estimated cost analysis revealed that the membrane contactor process at pH 12 was approximately 1.41 times more cost-effective than conventional air-stripping processes over eight years of operating period (pH-12 membrane contactor: $19.79; pH-12 air stripping: $23.75). This study provides a detailed analysis of the optimal conditions for selective ammonia recovery from complex wastewater, highlighting both effective treatment and sustainable resource recovery and offering a superior alternative to traditional methods.

A holistic valorization of treasured waste activated sludge for directional high-valued products recovery: Routes, key technologies and challenges.

Global energy shortages and environmental crises underscore the imperative for a circular economy to tackle resource scarcity and waste management. The circular economy model encourages the recovery and reuse of valuable materials, reducing reliance on finite natural resources and lessening the environmental impact of waste disposal. Among urban organic solid wastes, waste activated sludge (WAS) emerges as a potent reservoir of untapped resources (including various inorganic and organic ones) offering significant potential for recovery. This review delves into a comprehensive analysis of directional valorization of WAS to recover high-valued products, including the inorganic matters (i.e. phosphorus, ammonia nitrogen, and heavy metals), organic resources (i.e. extracellular polymers like alginate and protein, volatile fatty acid, methane, hydrogen, and plant growth hormones) and reutilization of WAS residues for the preparation of adsorbent materials - the biochar. Moreover, the main recovery methodologies associated influencing parameters, product application, and attendant challenges for those diverse recovered resources are unveiled. Future research are encouraged to prioritize the development of integrated multi-resource recovery approaches, the establishment of regulatory frameworks to support resource recovery and product utilization, and the systematic evaluation of disposal strategies to foster a more sustainable and resource-efficient future. This work illuminates avenues for sustainable WAS management with high-valued resource recovery towards circular economy.

Re-vitalizing wastewater: Nutrient recovery and carbon capture through microbe-algae synergy using omics-biology.

Increasing amounts of wastewater is the most pervasive and challenging environmental problem globally. Conventional treatment methods are costly and entail huge energy, carbon consumption and greenhouse gas emissions. Owing to their unique ability of carbon capturing and resource recovery, microalgae-microbiome based treatment is a potential approach and is widely used for carbon-neutral wastewater treatment. Microalgae-bacteria synergy (i.e., the functionally beneficial microbial synthetic communities) performs better and enhances carbon-sequestration and nutrient recovery from wastewater treatment plants. This review presents a comprehensive information regarding the potential of microalgae-microbiome as a sustainable agent for wastewater and discusses synergistic approaches for effective nutrient removal. Moreover, this review discusses, the role of omics-biology and Insilco approaches in unravelling and understanding the algae-microbe synergism and their response toward wastewater treatment. Finally, it discusses various microbiome engineering approaches for developing the effective microalgae-bacteria partners for carbon sequestration and nutrient recovery from wastewater, and summarizes future research perspectives on microalgae-microbiome based bioremediation.

Digitalization of phosphorous removal process in biological wastewater treatment systems: Challenges, and way forward.

Phosphorus in wastewater poses a significant environmental threat, leading to water pollution and eutrophication. However, it plays a crucial role in the water-energy-resource recovery-environment (WERE) nexus. Recovering Phosphorus from wastewater can close the phosphorus loop, supporting circular economy principles by reusing it as fertilizer or in industrial applications. Despite the recognized importance of phosphorus recovery, there is a lack of analysis of the cyber-physical framework concerning the WERE nexus. Advanced methods like automatic control, optimal process technologies, artificial intelligence (AI), and life cycle assessment (LCA) have emerged to enhance wastewater treatment plants (WWTPs) operations focusing on improving effluent quality, energy efficiency, resource recovery, and reducing greenhouse gas (GHG) emissions. Providing insights into implementing modeling and simulation platforms, control, and optimization systems for Phosphorus recovery in WERE (P-WERE) in WWTPs is extremely important in WWTPs. This review highlights the valuable applications of AI algorithms, such as machine learning, deep learning, and explainable AI, for predicting phosphorus (P) dynamics in WWTPs. It emphasizes the importance of using AI to analyze microbial communities and optimize WWTPs for different various objectives. Additionally, it discusses the benefits of integrating mechanistic and data-driven models into plant-wide frameworks, which can enhance GHG simulation and enable simultaneous nitrogen (N) and Phosphorus (P) removal. The review underscores the significance of prioritizing recovery actions to redirect Phosphorus from effluent to reusable products for future considerations.

Biochar derived from alkali-treated sludge residue regulates anaerobic digestion: Enhancement performance and potential mechanisms.

Biochar produced from bio-wastes has been widely used to promote the performance of anaerobic digestion. Waste activated sludge (WAS) is considered as a kind of popular precursor for biochar preparation, but the abundant resources in WAS were neglected previously. In this study, the roles of biochar prepared from raw, pretreated, and fermented sludge on anaerobic digestion were investigated. That is, parts of carbon sources and nutrients like polysaccharides, proteins, and phosphorus were firstly recovered after sludge pretreatment or fermentation, and then the sludge residuals were used as raw material to prepare biochar. The methane yield improved by 22.1% with adding the biochar (AK-BC) prepared by sludge residual obtained from alkaline pretreatment. Mechanism study suggested that the characteristics of AK-BC like specific surface area and defect levels were updated. Then, the conversion performance of intermediate metabolites and electro-activities of extracellular polymeric substances were up-regulated. As a result, the activity of electron transfer was increased with the presence of AK-BC, with increase ratio of 21.4%. In addition, the electroactive microorganisms like Anaerolineaceae and Methanosaeta were enriched with the presence of AK-BC, and the potential direct interspecies electron transfer was possibly established. Moreover, both aceticlastic and CO2-reducing methanogenesis pathways were improved by up-regulating related enzymes. Therefore, the proposed strategy can not only obtain preferred biochar but also recover abundant resources like carbon source, nutrients, and bioenergy.

Human health risk assessment framework for new water resource recovery-based bio-composite materials.

A new type of bio-composite material is being produced from water-recovered resources such as cellulose fibres from wastewater, calcite from the drinking water softening process, and grass and reed from waterboard sites. These raw materials may be contaminated with pathogens and chemicals such as Escherichia coli, heavy metals, and resin compounds. A novel risk assessment framework is proposed here, addressing human health risks during the production of new bio-composite materials. The developed framework consists of a combination of existing risk assessment methods and is based on three main steps: hazard identification, qualitative risk mapping, and quantitative risk assessment. The HAZOP and Event Tree Analysis methodologies were used for hazard identification and risk mapping stages. Then, human health risks were quantitatively assessed using quantitative chemical risk assessment, evaluating cancer and non-cancer risk, and quantitative microbial risk assessment. The deterministic and the stochastic approaches were performed for this purpose. The contamination of raw materials may pose human health concerns, resulting in cancer risk above the threshold. Microbial risk is also above the safety threshold. Additional analysis would be significant as future research to better assess the microbial risk in biocomposite production. The framework has been effectively used for chemical and microbial risk assessment.

Towards a circular economy: Development of a support tool for designing reverse logistics systems.

Reverse Logistics (RL) of end-of-use/end-of-life products is a key approach for supporting the transition to a circular economy. However, lack of knowledge and experience in designing RL is one of the barriers for companies in implementing successful RL. This research proposes an RL support tool (RLST) for designing RL systems, developed through iterative cycles of theoretical development and empirical testing/feedback from potential users. The RLST builds upon the principles of configuration systems to adapt the various aspects of RL design into a knowledge base and, subsequently, into an Excel-based support tool - in addition to allowing companies to assess their motivation/driver and set the context (e.g., product characteristics, the existence and nature of Extended Producer Responsibility (EPR) legislation), it supports the design of the RL network/channel and other aspects such as stakeholder collaboration, legislation, consumer behaviour and incentives, use of digital technologies, key performance indicators and factors around governance/programme management. Such a tool can be helpful for practitioners in addressing the knowledge gaps, stimulating discussions among stakeholders for scenario building and for analysing how different scenarios might work. The research advances the knowledge on RL systems design for the circular economy along with, for the first time, building knowledge and application of configuration systems in the field of RL.

Experimental investigation on sludge conditioning and dewatering using an agricultural biomass coupled with resource recovery.

In this study, the effect of modified areca husk fibre biochar (MAFB-AlCl3) on dairy sludge conditioning and dewatering along with raw and modified coconut shell biochar (MCSB-FeCl3) was investigated. Further, MgO impregnated biochars of areca husk fibre and coconut shells was carried out to evaluate the performance on phosphate recovery from the diary sludge. The enhancement in sludge dewatering with MAFB-AlCl3 were evaluated experimentally and significant reduction of capillary suction time (CST) (51.6 %), moisture content (18%), zeta potential (1.3 mV) and increased settleability (32.7%) were observed. The sludge conditioning parameters namely dosage (% of dry solids (DS)), rapid mixing time (RMT), slow mixing time (SMT) were optimized by response surface methodology for the modified biochars. Optimum CST (31.51 s) was obtained at dosage (50 % of DS), RMT (9.89 min) and SMT (17.23 min). Results of batch study for phosphate recovery by MgO impregnated biochars (MgB) was found to be 96.6 % and 100 % by MgB of areca husk fibre (MgAFB) and coconut shells (MgCSB) respectively. The morphological characteristics and elemental distribution using field emission scanning electron microscopy (FE-SEM) & energy dispersive X-ray spectroscopy (EDS) reveals the structural change in the sludge particles for the modified biochars as well as for sludge. Hence MAFB-AlCl3, MgAFB and MgCSB is proved to be suitable and an effective candidate for sludge conditioning and dewatering coupled with phosphate recovery in handling the diary sludge.

Waste to resource recovery at a marina: Empirical evidence of upstream and downstream innovation for circularity.

In 2021, an Australian research centre partnered with a regional marina and shipyard where 90 businesses build, refit, and maintain boats in premium condition. Tenants and owners grapple with environmental waste management issues. Since there is a gap in applying action research but numerous calls to co-produce solutions and participate in translating ideas into practice, action research was used in this case study involving upstream and downstream innovation for circularity. Mixed methods data was collected through interviews, stakeholder workshops, and waste audits. A strategic action plan was created for closing the loop on waste. Interventions included tackling toxic, degradable products with natural alternatives, trading and remanufacturing materials to extend product life cycles, testing problematic materials, and pursuing product stewardship. This study is novel because it extends diffusion of innovation theory to real-world impact through a co-innovation process. Results underscore that ongoing achievements depend on properly sorting waste, accessing reprocessing facilities, and maintaining dedicated staff and partnerships, especially legislative support for making continuous improvement.

Highly efficient recovery of phosphate and fluoride from phosphogypsum leachate: Selective precipitation and adsorption.

Phosphogypsum, a typical by-product in the phosphorus chemical industry, could generate a large amount of leachate containing phosphate and fluoride in the process of rainfall and long-term stacking, which not only causes serious environmental pollution, but also leads to a waste of resources. In this study, a united treatment of calcium hydroxide precipitation and lanthanum zeolite (La-ZFA) adsorption was proposed to achieve the recovery of phosphate and fluoride from phosphogypsum leachate. In phosphogypsum, most phosphorus could be leached except P in the residual occurrence form, while for fluoride, only water-soluble F could be effectively leached. The optimum leaching amounts of phosphate and fluoride were 22.59 and 4.64 mg/g, respectively, at liquid-solid ratio of 400:1, leaching time of 120 min, pH of 6.0, particle size of >200 mesh (<0.075 mm), and leaching temperature of 25°C. Using Ca(OH)2 as the precipitant, the phosphate could be precipitated selectively from phosphogypsum leachate by controlling pH and time, and the concentrations of it decreased significantly to 0.29 mg/L at pH 10.0, with a removal efficiency of 99.48%. XRD, SEM and Visual MINTEQ software analysis proved that the main component of the precipitate was hydroxyapatite (Ca5(PO4)3(OH)). After P precipitation, a series of sorbents for fluoride were investigated, and La-ZFA sorbent was chosen and utilized to recover the fluoride from the leachate through a cyclic fixed-bed column. The efficiency of La-ZFA was basically not affected by the high concentration sulfate, and it can selectively adsorb fluoride from phosphogypsum leachate, leading to a final fluoride concentration of 0.29 mg/L in the effluent. The characterization demonstrated that fluoride might be adsorbed onto the La-ZFA via ligand exchange with hydroxy groups. The proposed method in this study is expected to sequentially recover phosphate and fluorine from the leachate of phosphogypsum, and it has great guiding significance for resource utilization and management of phosphogypsum.

Review on the escalating imperative of zero liquid discharge (ZLD) technology for sustainable water management and environmental resilience.

This comprehensive review delves into the forefront of wastewater treatment technology, with a specific focus on the revolutionary concept of Zero Liquid Discharge (ZLD). (ZLD), underpinned by a sustainable ethos, aspires to accomplish total water reclamation, constituting a pivotal response to pressing environmental issues. The paper furnishes a historical panorama of (ZLD), elucidating its motivating factors and inherent merits. It navigates a spectrum of (ZLD) technologies encompassing thermal methodologies, (ZLD) synergized with Reverse Osmosis (RO), High-Efficiency Reverse Osmosis (HERO), Membrane Distillation (MD), Forward Osmosis (FO), and Electrodialysis Reversal (EDR). Moreover, the study casts a global purview over the deployment status of (ZLD) systems in pursuit of resource recovery, accentuating nations such as the United States, China, India, assorted European Union members, Canada, and Egypt. Meticulous case studies take center stage, underscoring intricate scenarios involving heavily contaminated effluents from challenging sectors including tanneries, textile mills, petroleum refineries, and paper mills. The report culminates by distilling sagacious observations and recommendations, emanating from a collaborative brainstorming endeavor. This compendium embarks on an enlightening journey through the evolution of wastewater treatment, (ZLD)'s ascendancy, and its transformative potential in recalibrating water management paradigms while harmonizing industrial progress with environmental stewardship.